Tried to update to ios6.1, but after that my ipad show s the connect to itunes and stuck there.
tried to upgrade my ipad from 6.0.1 to 6.1 yesterday, then got screen got stuck at connect to itunes pic. my itune is up to date.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Similar Messages
-
Im having trouble downloading the iMovie app on my iPad. When I click on the iCloud icon it says that it will download without additional charge because I've already purchased it(I did purchase it) but after that it goes back to the icloud icon and doesnt download. How can I download it?
Hello bianca,
It sounds like you are trying to download a previous purchase to your iPad but the item never downloads. I would recommend starting by closing all the apps that are running in the background.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that, sign out of your iTunes account in Settings > iTunes and App stores, and restart the phone and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling -
I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more screens, what can i do to fix it,a already tried to recover several times, on three different computers nothing happens
1. Turn off iPad
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
Help me please i have ipad 3 its screen goes blank white again & again ... last night i try to restart my ipad but after that my ipad is not turning on, when i put it on charge there beep coming again & again..
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
My iPad mini says to connect to iTunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back, i just want my iPad restored to its starting settings.
If everything else that you try fails, I would try using another computer. Since you don't care about saving any data, any computer that is running the latest version of iTunes might be able to restore the iPad. You could make an appointment at an Apple Store Genius Bar and they can do it for you.
If that isn't feasible for you, try using a different cable, a different USB port. reboot the computer, and reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then try again. -
I cant set up my facetime in a new iPod touch 5 generation, I enter my apple id and password and select my email address and it get verification but after that it come back to enter my apple id and password again. please help
This is the iPhone forum
-
Please help! I just sync my notes to icloud of my ipad mini but after that all notes has been covered by iphone's and all notes are missing from iPad,how could i restore it?
It's very possible that you did just as you suspect. One of the later Note file over wrote the one stored on your iPad when you synced.
When one does a sync of their iPad a backup of the iPad is created first. If that backup was still available you might be able to find the Note file there. But more than likely, if you are letting the iPad and iPhones sync on their own over Wi-Fi you have over written that back up as well. -
Hi, I have a iphone4, and bought a pair of Harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection stops.
Can you please advise me on the subject
Regards
IzakThis previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990 -
After updating to iOS 7, there was an error and I had to restore to factory settings. I then followed the steps to import everything and it appears to have done so, but even when I have restored and synced from my iTune, my screen still shows the "Connected to iTunes" or "Connect to iTunes" page, and will not progress or let me to my homepage. I have spoken to an O2 guru who has told me I've followed all the correct steps, and this is therefore an Apple problem. I have restarted and followed all possibilities, what do I do now?
Keep trying ...
Recovery mode is the last option. If that doesn't work, you'll need to take your iPhone in to a service center.
Follow the exact steps listed in HT1808. -
I have a iphone 4 and it will not come out of the connect to iphone mode. I have connected to itunes and it will go about 3/4 of the way and say the phone cannot be updated. It was installing and update when this happened. can anyone help?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you should be able to restore to factory settings.
-
can someone tell me how to unlock ipod touch 4th gen. my son forgot password and put wrong one in more than he should have now it says ipod disabled connect to itunes and has a picture of a roll of toilet paper with a frowny face and hands holding onto another piece of toilet paper almost ripped off holding onto the hands of the roll
You are very welcome...few users realize that the recovery mode restore may need a few tries to get it to work...so often just add the caveat. There is a difference between parents and their children who have lived with technology all their lives
-
Today I was updating my phone to the newest IOS 7 and after it finished downloading. An error showed up on my screen telling me it was unable to update. So I decided to just unplug my phone and maybe do it later but on my screen I have a USB cord and the iTunes logo asking me to connect. So I hooked it back up and still at this point my iTunes will not connect and when I unplug the phone the screen stays the same. I have tried turning off the phone and restarting and both times the screen goes back to the connect screen.. How can I fix this?
I have tried the steps to fix it but no solution! Please someone tell me what to do!
-
I have the Weather network app. I did a update on this app. then the app stop working. I removed and installed a couple times. I have just tried to update from apple Iphone link. going to settings / general/ software updates. there was no tab (software updates) I also rebooted the phone- holding sleep and home tell the apple logo apeared.
Now what???You need to connect it to a computer to update it as described in that article.
(70075) -
im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
I'm trying to update my credit card in ITunes, but it won't let me input the security code. Does anyone know how to solve this problem?
Could you give me more details on how it would let you put in the CVV?
Maybe you are looking for
-
Hi Everyone! I'm new to Mac, and I'm a bit unsure of how to handle a problem I'm having with application windows. Here's the scenario: On one space I have a bunch of PDF's open in Preview next to the document I am working on. On another space, I migh
-
how do you transfer playlists from on computer to a new one, library has already been transfered
-
How to cast a parameter from ${bindings.myParam} which is Number to String
I have a button which sets a param in request so I do sth like this in event on uix page: <set property="param_id" target="${requestScope}" value="${bindings.myParam.attributeValue} "/> but that myParam is Number (not String). And I have java.lang ca
-
Deleting Unnecessary iTunes and Quicktime Files
Having installed and subsequently updated iTunes and Quicktime (with both programs being parts of one update "package"), I believe I may have many unnecessary files on my machine which Apple's installation and updating processes did not throw out or
-
Indesign CS5 Rotate Tool Anchor Point Bug
When rotating any object using either the rotate tool or 'Rotate 90 Clockwise/Anti Clockwise' the Anchor point defaults to the top left hand corner of the object frame. I would expect the Default Anchor point to be the center of any object that is pl