Tried to update to IOS8, failed, Ipad now wants to restore but immediately tries to download IOS8 again its not working!
Hello
Tried to update to IOS8 last night, backed up Ipad and downloaded IOS8.
It failed to update properly and ONLY gives me the option to restore the Ipad, it won't turn on I have to plug it into Itunes.
When I plug it in and go to restore it immediately prompts the following:
Then:
I click "Restore and Update"
I click next
I agree.
The download starts (weirdly its very slow) during the download I keep getting the first message. A few clicks and the box disappears and eventually the software is downloads (see below).
But it won't allow me to update / restore etc It cycles around these messages.
HELP - I have no idea what to do.
Many Thanks
MT
I have much the same problem although my Ipad 2 says its in recovery mode. I have tried to restore and update repeatedly but nothing is happening.
Tom
Similar Messages
-
i tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?
You will need to restore the software via the following procedure:
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings. -
I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!
The latest iWork '09.2 requires 10.7 Lion. You can go onto eBay and get the '09.0 or the '08 version which will work with 10.4. http://en.wikipedia.org/wiki/IWork
iWork '09 http://www.ebay.com/sch/i.html?_sop=12&_ssov=1&_fln=1&_sacat=0&_sc=1&_nkw=iwork+ 09&rt=nc
iWork '08 http://www.ebay.com/sch/i.html?_nkw=iwork+08&_sacat=0&_odkw=iwork+09&_sop=12&_ss ov=1&_osacat=0&_fln=1&_sc=1 -
Trying to download itunes and its not working, can someone help plz??
I am trying to download itunes to my computer, and everything seemed to be loading ok, but then when I get to the terms&conditions and I try to hit agree, nothing happens, it's as if I can not even click it, does anyone have any idea on what i can do? Thanks
hewlet packard Windows XPhi April!
just doublechecking something. is the download hanging at the initial phase of proceedings? or is this happening after the installation has actually pretty much completed?
if it's at the later stage of proceedings, are you getting a sort of "brief flash of a license screen? or is something else a little different happening?
love, b -
hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??
What exactly happens when you try to restore via iTunes?
Error messages? -
I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now
Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up. -
I was using midvd app(i never had idvd) to make home movies on dvd from imovie '11 version 9.0.9 with no problems before xmas 2013. ive just tried to make a new one today and it wont work.
It seems to burn to the dvd (you can see a mark on the back of the dvd as if it has some info on it) but it wont play on imac (just says blank disc) or any other dvd player.
I have tried reinstalling midvd app and also tried 2 other dvd creator apps and the same thing happens the app says its burning and the external superdrive whirs like its doing something but it wont play.
The only thing i have done since xmas is all the updates to the operationg system and updated imovie (i didnt like the new version so went back to using the previous one)
Any ideas - i am new to all things mac!When you export your movie from iMovie, are you choosing H.264? That is the only compression method supported by this miDVD. Youc an give this a try first:
Use Share > Export to Quicktime > Movie to Quicktime Movie > choose Options and then make your choices in Settings, etc (you can choose whatever size your video is - mine was 720 HD at that time):
If that does not work, I'd suggest going to their support site as they claim to be able to burn to DVD.... I just checked their site and here is their list of supported file types:
http://shedworx.com/midvd-supported-file-types -
Trying to download 9i for MacOSX not working
I fill out the appropriate page and accept the licence agreement. I get to the page where the 9i download for MacOSX is, but then I'm instantly redirected back to the agreement page. There is no chance to even click on the link to download the database. What's going on with this?
Hi,
Can you let us know what OS and browser you are using. Can you try an alternate browser and let us know if you experience the same behavior? With win2k and ie6 or ns4.79 it seems to work fine.
Thanks,
OTN -
I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful. thanks a lot
I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful. thanks a lot
-
my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
My daughter locked her Ipad so I restored it and now am trying to activate it. It ask for a apple id/pw but the one she thought it was is not working. Any suggestions?
Activation Lock
http://support.apple.com/kb/PH13695 -
Updated Scrabble on my iPad, now it crashes when I open. How do I fix, without losing games I am playing now?
I have a similar issue. I have the CS4 Design Premium with all updates on an iMac running 10.6. All Adobe apps work except for Flash 10.0.2.566. All apps worked perfectly under 10.5. Within seconds of loading a file or clicking 'New' Flash terminates generating an Apple crash report (see exerpt below) - not an Adobe crash report.
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
(BTW, sometimes a normal Quit is interpreted as a crash by the other CS4 apps. Could this be related?) -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
HT2404 why is os X update taking so long I tried to download it and would not finish.
why is os X update taking so long I tried to download it and would not finish downloading..
It's been a few days since the original post. If you use Software Update again now, do you still have this problem?
Also, what is the name and version number of the update? If you can't get Software Update to do it for some reason, you can search for that update on Apple Support, then download and install it manually.
Before you do that, run Disk Utility (which is on Applications/Utilities). Select "Macintosh HD" in the sidebar and go to the First Aid tab. Click Verify Disk. This will check to make sure there is nothing is wrong with your startup disk. If there is a problem reported, that may be causing the problem with Software Update.
Maybe you are looking for
-
I have the download list for firefox but accidentally deleted the file on my computer. I need the file and was wondering if there was a way of using the download list to access the file somehow, I don't think the file os on the internet either as I h
-
Mac Mini doesn't startup after failure firmware update..
Hello. I have a mac mini. Downloaded firmware update and Mac OS X update through MAC OS X Software Update. After that my Mini Mac ask me to restart. And now my display shows "No signal" message and no startup sound. Indicator lights up, can hear Hard
-
Hi all, I'm looking to add a little bit of Swing eye-candy. I have a little pop-up window that informs the user that their file has saved after they hit "save" or Ctr-S. I need it to be noticeable (so that they are assured that their file did indeed
-
HT4009 How do I cancel in apps purchasing for yearly suscription which I did intend to?
I recently downloaded TripIt. When I tried to figure out the things accidently click on a link and take me to purchase the service with no price displayed. I thought it was free. It actually did purchase one year of TripIt Pro Services for $48.95. Ho
-
Auto execution of CO11N using scanner for operation level Prod. confirm
Hi PP champs I am looking for a potential development for my current project and i am sure somebody can help me in this. - Automatic operation confirmation for Production Order using the scanner. Client's requirement is that they want to do the opera