- tried to use the media sync for itunes says i need a "microsd card"
is this something I am to purchase separately or is it in my phone? I am clueless - thanks!
Solved!
Go to Solution.
dopeywebb wrote:
do you know if there is a way to reset the time that your task reminder defaults to? I thought I remembered seeing this when I first got the phone - but now I can't find it anywhere....
Please open a new specific discussion for that matter. In order to keep the forum tidied.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Similar Messages
-
i go to install the app, and it says i have to review and confirm my account, so i do and it says put in ur credit card details.. but i dont have any?? what do i do
Some users has reported that you can't set up an account withut a credt card or payment method if you do that through/while purchasing an app. Try creating a new iTunes account without a credit card on the computer using the link previous provided. Alternately yu shouldbe able to purchase an iTunes gif tcard and and enter that as the payment method.
-
Looking for help updating my macbook...
If you are running 10.5.8, you should purchase the Snow Leopard install DVD from Apple and upgrade with the to 10.6 for starters.
-
Trying to install the latest update for itunes...error received "service apple mobile device failed to start. verify thay you have sufficient priveleges to start system services"...? I have uninstalled and tried to reinstall???
Hello Kimberly0914,
It sounds like you have tried to launch iTunes after a recent update due to this error message, and you cannot install iTunes after uninstalling. I recommend the troubleshooting from the following article to help you named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Then download and install iTunes with this link:
http://www.apple.com/itunes/download/
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I tried to download the newest version for iTunes and now it is saying something about apple mobile device. Never heard of this before and now it will not finish downloading because of this. What is it?? What do i need to do to get itunes to download onto my computer again??
I got most of it done but now it is not letting me delete my C:\Program Files\Common Files\Apple
It says that file is open in another program....What do i need to do to delete that?
Do you currently have the iCloud control panel installed? If so, uninstall that. Can you do the deletion now? -
i am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me
You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system/tool to link the two togther and silently redirect any file operation on the old location through to the new one.
tt2 -
I am trying to use the liquify tool for the first time. I created a new document (RGB/8). Before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?
What am I doing wrong?
For one thing you forgot to mention the version of Photoshop you use.
Did you place the image as a Smart Object? Liquify got Smart-capabilities with Photoshop CC. -
Music does not play on Iphone when using the Remote app for Itunes , is this normall.
Hi all,
I am using the remote App for ITunes on my IPhone 5,I can get the phone to operate
ITunes perfectly but there is no audio coming from the phone, I am having a party and I
want to play the same playlist throughout the house without having it up at full volume.
I was hoping to leave the laptop downstairs and plug the IPhone into a stereo upstairs.
If this is normal ...........
Is it possible to load the playlist on to 2 computers , and have them playing the same music
simultaneously.
Any suggestions pleaseSee http://discussions.apple.com/thread.jspa?messageID=9926596
-
tunes is stating that my ipod has space but when i sync it itunes says i need an additional 1.32GB
Check carefully. Perhaps you are trying to copy 9 GB plus 1.3 GB for a total of 10.3 GB. That would give you the message you see.
-
recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH
Why can't you update your computer operating system ("desktop software")? What software would that be?
-
OK i bought a movie got the confirmation email but iTunes says I need to buy it even the funds where taken
Not sure what your issue is or what your question is.
-
Trying to use the same ground for more than two channels (RSE configuration) with usb 6000
Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
MariaYou're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria -
I have Labview 7.0 and Matlab 6.5 installed on all the computers at my School. When I tried to use the Matllab Scripting Window for the first time, it worked, but after two days when I was trying to run the program, there was a meesage saying that the License is for instructional Purpose only and not for Research or commercial use and the Labview is getting totally stuck. I need the Matlab Scripting VI for my Project,could anyone suggest what I shd do or is there any other method by which I could do that.
Hello Medha,
Thank you for contacting National Instruments.
From the information you have provided, I am not sure what is causing your problem. Make sure that you do not have an evaluation license for LabVIEW.
What, if anything, was changed in your VI before it stopped working? Will it run without the Matlab script?
If you continue having trouble getting your VI to work, please respond with more information. If you like, you can post your VI (along with any necessary sub-VIs) and I will take a look at it.
Have a great day,
Sean C.
Applications Engineer
National Instruments -
Blackberry media sync for itunes
I can not sync my itunes it comes up with a message that says the blackberry media sync installation failed to initialize please run blackberry desktop manager with administrative privileges and try again. I UN installed and reinstalled still not work what can I do
BlackBerry Media Sync has just been updated to version 2.0.
I suggest you download it and see if the issue is solved.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Ipod 5 won't sync with iTunes, says it needs to be restored to factory settings.
Two error messages pop up when I plug it in.
1) iTunes cannot read the contents of the iPod “Katie's iPod touch”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
2) The software required for communicating with the iPod is not installed correctly, and you must manually eject the iPod before each disconnect. Please reinstall iTunes to install the iPod’s software.
I can't format my ipod, there's too much stuff on it (and it's not like I can back it up because it won't sync) that I would lose. At first I thought this was because my connect cord was worn out, it kept disconnecting and reconnecting while it was plugged in, but I got a new cord and the problem is still occuring.
Please help! I can't sync any of my apps or information and I can't add any new music to my ipod, which is problematic.First try to resolve #2 by:
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says.
Maybe you are looking for
-
Removing built in loops ?
Hello all, I was just wondering if there was a way to remove/delete the loops that came with ios GarageBand . I know there's a way to reset and replace them but for now they're just taking up space on my device. Thanks
-
Hi I have created a custom infotype and I had added some additional logic in the module pool in PM01. Nw whn try to open the module by double clickin on it , it is goin for dump. I'm gettin the followin error.. TSV_TNEW_PAGE_ALLOC_FAILED No more stor
-
Letter of Credit in sales cycle
Hello experts, I have the following scenario: Apart from the Invoice Document I need to give to the customer some Letter of Credits (LOC) that represent the 100% of the invoice value. The customer will pay the letter of credit, not the invoice. So I
-
How to display multiple lines of texts in a single rows in ALV
Hi, I have a unique requirement in which i have to display multiple lines if texts for a single rows in ALV Grid. Right now in my output it is coming in single line which is not visible fully because that text is more than 255 character. So i want to
-
Insert Character in a String ?
I am trying to insert the following character " / " to my string. It is printing out as 19990923. I want the output to print 1999/09/23 I need some help with this problem. Thanks for any assistance. String[] s2 = eRecord.split(","); String stkSymbol1