Tried using Patil's block for the mindsensor​s Distance sensor, but will not load
("written in 8.5" but am unising 8.2" any work around on this?)
Thanks, Gil
Solved!
Go to Solution.
Gcalifornia wrote:
("written in 8.5" but am unising 8.2" any work around on this?)
Thanks, Gil
Hi Gil,
You'll have to ask him to save it in 8.2 format in order for you to load it.
Joel Sumner
NI-Shanghai
Similar Messages
-
I use Google chrome and for no reason all my add-ons will not load.
Yesterday AM when I logged onto my laptop and opened Google home page, none of my add-ons (gadgets) would load. This has gone on for 2 days now.
I have rebooted, checked to make sure the site was listed as safe for add-ons and checked settings. Nothing has worked so far. Also when I clicked on "change google themes" there was no response.
Any ideas?If your problem is with Google Chrome you would be better off asking in the Google Chrome support forums - http://www.google.com/support/chrome/
-
For the 2nd day my iPhone 5 will not let me download updates for apps. I've tried selecting each to click off wait, and have selected new updates indvidually instead of all together. Also have shut the phone down and have even deleting the apps completely and re-downloaded but to no avail. Each app continues to sit on my screen with the line below as if it is about to download but never does, and now any apps I've tried to updated will not let me use them.
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?
Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.
I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
... And no I am not trying to connect both at once. To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair. The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect. -
Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
== This happened ==
A few times a week
== Couple of weeks agoYour UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''general.useragent.'''
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
Then restart Firefox -
I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
I was updating my iphone 4s on my computer and there was an error and my phone has the connect to itunes symbol but will not connect to itunes on my computer. I am unable to use my phone and im not sure what to do..
See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808
-
I have tried on multiple occasions to download the new flash player and it WILL NOT download
I have tried on multiple occasions to download the new flash player. It will not even get me to the run screen.
HelpHello,
Welcome to Adobe Forums.
Are you using a MAC or Windows ?
Which browser are you using ?
What happens when you try to download, any Error ?
Thanks,
Vikram -
I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music
try with this one
uninstall all the apple application S/w like Quicktime, Bonjour,
apple Device Support, Apple Auto update, Itunes etc from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it
If you are having Problem in uninstalling any of the apple application
try 'revo uninstaller' and uninstall all the apple applications
mentioned above -
My iPad is suddenly not loading any apps. When I click on an app, the screen flickers to black and then back to normal, but will not load the app. This is ALL the apps, not just one. Have tried rebooting, to no avail.
Was a Restore one of the things tried.? [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]
-
My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?
Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems. -
I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual. -
After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.
PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps. -
Mac suggestes downloads to open AVI files on HDVR. Telestream finds the plugged in HDVR file but will not play...blank black screen which has no sound or picture. DivX will not download, report sent to Aplle. Any ideas how to play the files?
Thank you, Daniel.....
Downloaded VLC and can play, trying now to edit clip and put it into a keynote presentation. Bought Mac as got fed up with windows but still not got used to it!
Maybe you are looking for
-
Invoice getting generated for 103 MT not for 105 during ERS
Hi Experts, I am facing one problem ,our client follows 103- 105 Mvt procedure for GR. the requirement is to create automatic invoice through MRRL for movement type 105 but instead zero value invoice is getting generated for 103 MVT Please suggest.
-
EZDrummer Velocity Sweep Automation?
Anyone who has ezdrummer probably loves that velocity sweep knob. i haven't spent too much time on it yet, but in 15 minutes i couldn't figure out how to emulate that velocity sweep with automation after i put it's midi files into the arrange window.
-
Portforwarding to multiple computers using netgear router? Is it possible?
I have a NETGEAR WRG614 wireless router, a G5 iMac 2.0 isight (wired) which is my primary computer, a MBP C2D 2.33 17"(wireless) and a iBook G4 1.33ghz (wireless). I can use iChat no problem as far as text chats go on all machines. I can video chat w
-
HT1490 How to use MacbookPro 15inch (late 2011) battery?
When i bought this laptop, the technician told me that since the battery is not removable, I should 1. plug the power adapter when the battery is left around 15-20% . 2. plug it out when it is green and battery is 100% so that battery will not be ove
-
Find the report from the query
Hi, We noticed one of the bad queries creating blocks in SQL Server and that is coming from our report server. I captured the query, Now I m trying to find what report that query belongs to ? Is there any way to find this from Report server database