Trigerr output type of a delivery programitaclly

Hi All,
I am creating deliveries for reservations using FM GN_Delivery_create.
It creates delivery documents properly but the output is not triggered automatically.
Here when a delivery is created manually a idco output is getting triggered..
Similarly when we open the delivery created by FM GN_Delivery_create is open in change mode & then SAVE , the idoc is getting triggered as expected
Pls suggest how can we achieve triggering this output from the custom program.
Thanks.

You can create a program that uses function RV_MESSAGE_UPDATE to insert output type that triggers on the delivery.
To know how to fill the interface of the above function use RV_MESSAGES_READ to read the NAST entry details from existing output. Fill the values in RV_MESSAGE_UPDATE similarly as the output of RV_MESSAGES_READ
Once done, you can process all these deliveries using RSNAST00 to mass trigger the output
Alternatively, you can create a LSMW or a simple BDC just to open and save a delivery so that the output triggers. Run the BDC / LSMW for all of the deliveries that you need to process. Then you can process all these deliveries using RSNAST00 as above

Similar Messages

  • Table for output type of a delivery document

    Hi guys,
    Would you know where could I find the output type of a delivery document espcially after I posted a GI in Shipment? Basically, It should reflect in devlivery document. So I am not sure if I should look at the delivery tables or goods issue.
    Help me guys!
    POints for the helpful ideas.
    THanks!

    Hi,
    There are 2things to be noted here.
    1. If your output type was already triggered once, then it should be visible in display mode also, with a Green colour button (if it is processed and the print out  is obtained). The fact that the output type is not seen in display  mode, says that the output type so far has nto been triggered.
    2. Seeing the output type coming in yellow colour in change mode of delivery document is expected. This means that the output is getting triggered now.If you save teh document now, you will get the print out.When you go in display mode again after a gap of say 1min, you can see the same output in Green colour as mentioned earlier.
    I hope this clarifies your doubt.Please let me know if you need some more info
    You can reward me if it helped you

  • External mail using output types in inbound delivery.

    Hi Experts,
    I want to send an external mail to vendor after creating inbound delivery.  for this i want to use only output types in messages.  Can somebody help me step-by-step how to configure the output type to send mail to external ID.
    Thanks in advance!
    Machindra Jogdand

    we can have print out from delivery from header output & item output.
    ok now for output ypu need to go to T.code: NACE, Take V2 -shipping and click on output types tab at the top most u will get a output type standard "MAIL"
    For the MAIL output type u assign a access sequence of your own.
    Maintain condition records in VV2.
    Select the output type in delivery
    GO to Vl02n enter the delivery no: take extras from the menu and take delivery output header /item enter the output type MAIL.

  • Output Type determination in Delivery

    I have maintained the Output conditions for the Shipping point in VV21.  But during delivery, the out put type is not getting determined.  I have done the same for other plants and it works well.
    Can anyone suggest what I should be looking at?
    Regards
    Tom

    Hi
    goto TRX NACE and select V2 and press condition type and select your output type and give the relevent entry.
    this will work
    regards

  • Output Type for Outbound Delivery in VL02N

    Hi All,
       Could you please tell me how to maintain output types for a specific outbound delivery in ECC , so that inbound delivery is created automatically from it? is it maintained in VL02N? I actually searched this on various forums but did not find the correct answer, as everywhere only the customizing is given.
    Thanks in advance
    Best Regards,
    Abhijeet

    Hi,
    You can maintain the output type SPED as below. Once you do PGI, SPED should be processed. If not , do it manually from  VL71.
    VL02N -> Extra>Delivery Output -> Header> Output Type = SPED
    Regards
    Edited by: Shashidhar Shetty on Dec 5, 2011 1:59 PM

  • Cannot find GR Slip output type in Outbound Delivery for Order type KA

    Hi Experts,
    We need to ,setup output type for GR Slip. for a delivery created for Order Type KA
    I am not able to find the Output Type in VL02N- Output (at item level).
    I have alreday created conition record in VV21 against the sales Org for output type WABS
    Please let me know if I am missing some thing
    pls help
    Regards,
    Shetty

    Hi
    Does the output type exist in the output procedure ? If yes, is there a requirement assigned to the output type and is this fulfilled ?
    Kind Regards
    Torben

  • Output Type for Deleting Delivery Notes completely

    Hello,
    I've a problem that in case of complete deletion of a delivery note I want to get message of deletion via IDOC DELVRY05. Normally the complete document will be deleted without any outbut determination.
    Where do I have to implement this? Is it in normal output determination for outbound deliveries?
    Thank you for your effort.
    Kind Regards
    Norbert

    *

  • Output types are not getting displayed in Outbound Delivery in Display mode

    Hello,
    The actual requirement is that output types should get attched to the outbound delivery when we do GI(Good Issue) on the outbound delivery.
    So, I have created an outbound delivery and did GI on it through IDoc. But, I can not see output types on the delivery (To see output types, go to Extra -> Output -> Header in VL03N) in the display mode. However, I can see in change mode (VL02N).
    Could you please suggest the solution for this?

    Hi sreeram,
    go to crm -> transactions -> basic settings -> define transaction types
    copy default email cx03 and create new zemail.
    assign that zemail to bus2000126 business activity.select the business activity and click on customizing header.assign the category email. click on channel. maintain the channels 1)GUI crm webclient UI, 2)ICW Interaction center webclient.
    save the changes.
    go to crm -> transactions -> basic settings -> settings for activities -> maintain categories, goals, priorities -> click on assign categories to transaction types.
    assign the category email(which you have assigned above) to the transaction type zemail.
    even check maintain categories as well
    click on maintain categories -> check 401 email assigned to class G email.
    Regards
    Krishna

  • Problem in  assign the delivery type to the existing output type

    Hi
    There is a problem in assinging the existing Output type to the delivery type.
    In, NACE i have maintained the output type for the procedure and also through VV21 i have created the condition type with the combination of shipping point/delivery type.
    But system automatically not determining the output type when we create the outbound delivery. This output type is to trigger the EDI in terns..
    Can any one guide me what are the setting to be done for the same?
    Edited by: V. Mariappan on Jul 5, 2009 12:40 PM

    Hi,
    Check whether you have maintained the condition records for output for the above combination & also the Print device in the Communication tab & Print immediately settings.
    If you haven't maintained the above, do the same & check.
    Thanks & Regards,

  • Standard output type for Delivery picking list

    Hi All,
    My requirement is to trigger a picking list from the outbound delivery whenever the overall WM status is "B". Probably I need to look at a new requirement routine to add this condition.
    Pls tell me what is the standard output type available for delivery picking list. I have analyed "EK00". Looks like this works only for deliveries without warehouse management.
    Also we dont have a customization path for "EK00" and it has to be assigned to a shipping point.
    Pls confirm if we can use EK00 for deliveries with warehouse management and is it correct?Else what is the other standard output type available for delivery picking list.

    check ZPCK picking list.
    SPRO>Logistics Execution>Shipping>Basic Shipping Functions>Output Control-->Define print parameters shipping
    Here available ZPCK condition type.I think this condition record you can use.

  • No processing log for outbound delivery for output type

    Dear Gurus,
    I want to see processing log for output type for outbound delivery .
    But when i click processing log push button for output type for outbound  delivey  , one error is comming as 'NO PROCESSING LOG FOR OUTPUT TYPE'.
    Could you please let me the reason ?
    Edited by: susheelkodam on Sep 9, 2010 10:33 AM

    Hi,
    What transaction are you running when you press the [Output log] button?  If you're in the create transaction, then I think the output log should be available but if you subsequently go in to VL02N and press the Log button, the I don't think the log is available.
    Regards,   Andy

  • Blocking delivery output types

    Hi All,
    I am doing my coding in user exit MV50AFZ1 for checking transportation data for the line items in STO. If it is not maintained then we should block that delivery. For that we are changing likp-lifsk and xlikp-lifsk value to 01(Block). Now client has added some new functionality to this. Now he is able to issue the delivery output with output types. We should be able BLOCK this also. Any pointers to do this will be of great help. We tried changing value lips-kvgr1 and xlips-kvgr1 to NDO, But it is not working.
    Regards,
    Vinod.

    Hi,
    Create a VOFM requirements routine for the output..And then assign that VOFm routine to the output type in the output determination procedure..
    In that VOFM routine have the following code..
    SY-SUBRC = 0.   " Propose the output type.
    IF XLIKP-LIFSK = '01'.   " Don't propose the output type if the delivery block is set.
    SY-SUBRC = 4.
    ENDIF.
    ***If XLIKP-LIFSK is not available then try using
    KOMKBV2-LIFSK.
    Thanks
    Naren

  • Output types for delivery documents

    Hi All,
    Please help me out.
    Thanks in advance,
    Here i got a requirement like i already have the output types for the delivery documents.However i need to copy the existed output types into different names bcoz to customize it for different organization in different region.
    The problem is i already copied the o/p types but when i went to vl03n and tris to see the output , am not able to find my o/p type there...am i need to do anything more..
    Please help me out as i am a ABAPER and not the functional guy am facing lot of  difficulty...
    again thanks in advance.

    dear govardhan
    please refer below
    Output Determination Procedure
    Output is a form of media from business to one of its business partners. The output can be sent to any of the partners defined in the document. Outputs are usually in the form of Order Confirmations, Freight List, Delivery Notes, Invoices & Shipping Notifications. Determining form of output is output determination
    Types of Output: Print Output, Fax, Telex, E-Mail & EDI (Electronic Data Interchange)
    PRINT OUTPUT:
    SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents & output determination for billing documents.
    Create Condition Table: select the field Sales Doc Type from field catalog & Save
    Maintain Access Sequence: 4-digits code & description. Assign condition table to access sequence. Select Accesses line item and Goto Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type.
    Select BA00 & Copy & Rename. Give the same 4-digit code as given to acc seq.
    You Can Maintain:
    Languages of Output
    Partners (to whom we want to send output)
    Print Program- print specification
    Sap Script- layout
    Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions.
    Maintain Output Determination Procedure: V10000 (Standard Procedure). Go to new entries & create your own 6-digit code with descp. Select the procedure & go to Control Data. Here mention the output type i.e. cond type & leave requirement and manual only columns as blank.
    Determination Rule: link the 6-digit procedure code to doc types.
    Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately.
    Once you press enter you will come across 2 key combinations:
    Sales organization/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. {It contains: Sales Orgn, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.}
    Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language.
    In SAP we can send the documents to respective partner functions through different transmission mediums. SAP uses condition technique to determine output t relevant partners with relevant transmission mediums.
    Out put determination procedure has a integration with technical module, as ABAPer’s  has to write SMART forms and FORMS to print the output , that SMART form output can be send to relevant partner function through relevant transmission mediums.
    Out put determination procedure for order confirmation: (V/57)
    a) Maintain condition table:
    Path:
    IMG
    SD
    Basic functions
    Output control
    Output determination
    Output determination using the condition technique
    Maintain out put determination from for sales document
    Maintain condition tables
    Maintain out put condition table for sales document
    Here we define condition table
    Ex: 007 – order type (sales order types)
    Save it
    b) Maintain output types:
    IMG
    SD
    Basic functions
    Output control
    Output determination
    Output determination using the condition technique
    Maintain out put determination from for sales document
    Maintain out put types
    Here we define out put types
    Ex:     AF00 -- Inquiry
         AN00 – quotation
         BA00 – Order confirmation
         BA01 – EDI odd response
         KRML—Credit processing
         LP00 -- Scheduling agreement
         MAIL – Internal message
         RD03—cash sales invoice
    Choose BA00 copy it and rename as a ‘MA00’
    click on details icon
    click on display to change icon
    then again choose ‘MA00’ click on details icon
    Maintain data in general data tab
    General data tab:
    Access sequence: 0010(order type)
    In IMG define access sequence and assign to the output type
    Check access to conditions:
         This indicator allows the system to read the condition records for output. If it is not been activated then system determines out put from customer master ex: By following out put determination procedure “DB0001”
    Check cannot be changed:
         This control specifies whether the out put can be changed or not
    Ex: direct mailings can be changed during processing
    Check multiple issuing:
    This indicator allows the system to send the output multiply
    Ex: sales order has been sent for 10 items again one item has been added to sales order so that business has to issue the new out put for sold to party with added line items. This indicator allows the system to send out put repeatedly.
    Check partner independent out put:
    During output processing when the indicator has not set then system allows only specific functions in specific partner functions
    Don’t write processing:
    This indicator determines whether system has to write processing log for output
    Default values tab:
    Dispatch time:
    Ex: send immediately: when carry the application this indicator determines when the output should be sent.
    Transmission medium:
    Ex:     print out
         Fax
         Telex
         Internal send
         EDI
         Simple mail
         Special function
         Events (SAP business workflow)
         Distribution (ALE)
         Tasks (SAP business work flow)
    Specify the transmission medium through which the output should be sent. (Ex: print output)
    Communication strategy
    Specify the communication strategy if you want to send the output externally
    A) Time tab:
    Check timing: (Periodic job not allowed)
    This indicator allows the system to carry out print program periodically.
    B) PRINT NEXT TAB):
    Print parameter: Ex sales org.
         Specify the print parameter.
    Click on mail title & Text control button under dialog structure.
    Here we assign title for the mail along with relevant text Ex:-EN (English)
    Processing routines control button under dialog structure.
    Here we assign programs form routines & form that are written by ABAPER, they           they various transmission mediums.
    Ex; - Transmission medium      shortest      program     form routine
              1                  print out     RVADOR       entry
    Click on position function control button here we assign relevant partner function to relevant transmission mediums
              EX: print out: SP (Sold to party)
    C) Maintain access sequences:
         Here we define Access sequence.
    EX: 0010 & Assign the condition tables to this output.
    D) Assign out put types to partner function:
         Here we assign output types along with transmission mediums to relevant partner functions.
    EX:      Out put type          Transmission medium
           MA00                    1
              “                    2
              “                    6
              “                    A
           MAIL                    7
    E) Maintain output determination procedure:
         Here we define output determination procedure
    Ex:     V10000     -     Order output
         V05000     -     Inquiry output
         V06000     -     quotation output
         V10001     -     Cash sales output
    Choose output determination procedure EX; V10000, copy it& rename it as MA0000
    Assign output type MA00 by going control date section.
    Save it.
    F) Assign output determination procedures;
    Allocate sales document Header.
    _ Choose sales document type OR & Assign output determination procedure i.e MA0000 & Assign output type MA00.
    Assign sales document items.
    -Choose item category TAN & Assign output determination procedure Ex: Ma0000
    - save it & exit.
    Maintain output records (vv11)
    Path:
    Logistic > S&D > Master data > output > sales document > VV11 – Create
    Specify output MA00, Click on Key combination & specify sales document type (OR), partner function (sp) transmission medium (1) dispatch type (4) language (EN)
    Click on communication button on application tool bar
    Specify output device – LOCL or LP01
    Check print immediately check release after output
    Save it
    Go to Va01 raise the sales order
    Go to extra button output header edit.
    Specify output type: MA00 partner function
    Select line, click on communication methods
    Specify logical destination
    Check print immediately
    Check release after output
    go back save it & exit
    Go to VA02, Go to Extras output header print preview
    Check out (order confirmation
    (ERROR: out put MA00 for partner cannot be processed)
    rewards pls
    siva

  • IDoc output type not getting configured in IDoc-File scenario

    Hello
    I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
    1] Created output type
    2] Created partner function as EDI LS for this output type
    3] Configured RSNASTED as Processing Routines for output type
    4] Included this output type in the Header output procedure
    5] Configured XI system as the partner in partner profile with appropriate Message control
    Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
    I checked in SPRO but could not find such flag.
    Does anyone had came across such output type configuration.
    Thanks in advance.
    I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
    Regards
    Rajeev

    Hi,
    Please check the following
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Copy NEU to ZNEU or YNEU
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
    G.Ganesh Kumar

  • Output type for a SAPscript

    Hi All,
    I want to know the output type of SAPscript form F110_FR_CHEQUE. Could anyone help me in this regard?

    Hi,
    go to transaction nace and select application you are interested in eg. V1 for SALES, V3 for BILLING etc. Click on output types button. You can see all the output types configured for delivery document. Select an output type and click on processing routines on the left. Go through them one by one and you can find the exact ouput type for your SAPScript.
    You can also check in table TNAPR for formname as your scriptname.
    KR Jaideep,

Maybe you are looking for