Trigger a Message based on a value from another Interface.?

Hello All,
I have a peculiar requirement kindly advise me if it is possible with PI 7.3
I have data coming from a system and it has to be sent to 4 different systems. Tricky part is message has to be sent to the sent 2nd system only if it is successful with the 1st System & it should be sent to 3rd system only if it is successful in the 2nd system and so on.
I got thoughts saying that it is not possible without PO. Kindly guide me.
Thanks & Regards,
Sree Ram

Hi Sree Ram,
You can achieve this by maintaining the QoS as EOIO and this can be achieved by checking the Maintain Order at run time in the Interface Determination(In case of classical XI scenario) and in ICO for AAE.
Let me know in case of any queries.
Regards,
Sriram

Similar Messages

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

Refreshing sql report region based on values from another region - 4.0

Greetings All,
I have a page with two regions, say region 1 and region 2. I have a before header process that fetches values from db based on criteria entered from another page. Region 2 is a sql report region with bind variables from region 1. When this page is rendered region 1 renders properly however sql report region always returns no records. What am i missing here?
I would like to have the region 2 render a report based on the values from region 1. Region 2 has a sql query that looks something like
select
colum 1,
column 2,
column 3
from table t1
where t1.c1 = :p10_item1
and t1.c2 = :p10_item2Using apex 4.0
thanks
Seetharaman

If these items hidden, try making them display only .
Also what happens when you move the items from region 1 to region 2.
From my experience items do not have much of a dependency on the region they are attached to other than cases when the region is not rendered(when its condition fails) and then the item values become null(bcoz they themselves are not rendered).

Field with a default value from another field

I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
Ben

Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

Variable type Hierarchy, how to get the value from another similar variable

Hi.
We have created a variable, type hierarchy (using ORGEH hierarchy in HR based on 0ORGUNIT). Let's call this VAR1. We want to fill this with an User Exit, beacuse we want VAR1 to have the value from another variable, VAR2, which is also type hierarchy (and based on the same characteristic).
However, when we program this user exit and use the VAR1 afterwards, it just behaves as if we have a single characteristic value and not a node value. As a result, we just get posts which do have the 'parent itself' as characteristic value, and none of the subnodes... Any hints as to what we can do in our User exit to get the value passed over from VAR2 to VAR1 as a node value? Is there any spesific syntax to be used here that we are missing? ( The VAR1 and VAR2 are both defined as hierarchy variables, we have double checked...).

Hi,
are you on BI7.0? There you can create variables type replacement path and get the value out from a different variable without any coding.
regards
Cornelia

How to derive a variable value from another variable of a different IO?

Hi Gurus,
I am aware that using BEx variables and Customer Exit you are able to derive a variable value from another variable of the same infoobject (for example, Fiscal Year/Period (0FISCPER) and Calendar Day (0CALDAY)).
However, is is possible, using the same approach to derive a variable value from another variable that is in a different InfoObject? (for example, Input Fiscal Year/Period (0FISCPER) but derive Output of Required Start Date (0REQSTDAT))?
There are 2 BEx variables involved,
1) A user entry variable that is restricted in 0FISCPER
2) A customer exit variable that is restricted in ZREQSTDAT
In CMOD under EXIT_SAPLRRS0_001, Include ZXRSRU01, the code (I assume, correct me if I'm wrong) should perform 3 functions in I_STEP = 2,
1) After the pop up, capture user entry of Fiscal Year/Period
2) Identify or convert Fiscal Year/Period to Calendar Day range (unsure on how to code this portion)
3) Use the Calendar Day to lookup on matching Required Start Date and display all Required Start Date that matches. (unsure on how to code on this portion)
Hope to hear your thoughts soon.
Regards,
Eric

Hi Shanthi,
I've made the necessary adjustments. The only difference in my code is,
Instead of,
If I_VNAM = 'ZREQSTDAT'
I use,
CASE I_VNAM.
Instead of,
PARAMETERS: ZFISCPER TYPE /BI0/OIFISCPER.
ZYEAR = ZFISCPER(4).
ZMM = ZFISCPER+4(3).
I use ,
This is the Customer Exit Variable in ZREQSTDAT
WHEN 'ZRSD_CX'.
The loop I use for the User Entry Variable in 0FISCPER-ZFYP_IN
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WHERE VNAM = 'ZFYP_IN'.
    IF SY-SUBRC = 0.
        CLEAR L_S_RANGE.
ZYEAR = LOC_VAR_RANGE(4).
ZMM = LOC_VAR_RANGE+4(3).
The codes were checked with no errors.
However, when I input the Fiscal Year/Periods and hit 'Execute'. The report went blank, not sure what is the cause. I've tried it several times. No error message appeared.
Regards,
Eric

Default value from another table in dummy field on a portal form ..

A form based on a table :
id
name
xx_id
I created a dummyfield on the form in which i would like the
name corresponding to xx_id -> I would like to fetch a value
from another tabel into a dummy field.
thanx
Trine Hindsholm

I could do this task by creating the form manually - is there anyway I can modify the insert for a form created by the wizard?

Validating an attribute based on the value of another while inserting

Hi guys
I need to validate an attribute based on the value of another attribute.
Example:
inside some entity I have the following validation function
public boolean validateAtt1(Number data){
     if (this.getAtt2() < some vlaue)
          return false;
     return true;
this function works fine when I'm updating a record, but when I'm inserting a new record the this.getAtt2 return null, now I don't want to override the validateEntity function I want to override the validate function for att1; so in other words is there a way to reach att2 in the validation function of att1 when I'm inserting a new record, because the this.getAtt2() returns null if I'm inserting a new record.

Using attribute-level setter methods won't work because when the value of a particular attribute is being set, the values of the other attributes might not yet have been set. This explains for example why it does not work when inserting a new record. You therefore have to validate at entity level.
Rather than coding on the validateEntity() method you use a built-in Validator or Method Validator. When recording validators like this, you can provide a separate message for each business rule. If you also have the bundled exception mode enables (which will be the case by default for web applications), then multiple messages can be shown at the same time.
If you have one business rule involving two different attributes, for example a and b, and you must provide different messages based on if a is causing the violation or b, you can do it like this:
- implement one method doing the validation and that will indicate which attribute is causing the violation
- implement two different method validators (with two different messages) that call the method doing the actual validation and return false based on the attribute causing the violation
For more information about implementing business rules in ADF BC, you might have a look at this white paper:
http://www.oracle.com/technology/products/jdev/collateral/papers/10131/businessrulesinadfbctechnicalwp.pdf
Jan Kettenis

How to Visible/Hide an Item based on the value of another Item

Hi
I need to visible and hide a textitem based on the value of another item.This form has 3 blocks, and the both item is in the first Master Block.
My code is:
if :RECORDTYPE=7 then
     Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_TRUE);
     Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_TRUE);
ELSE
     Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_FALSE);
Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_FALSE);
:BLOCK.ITEM:=NULL;
end if;
I wrote the code in the Validate Trigger, but not working when moving Next Record & Previous Record
Thanks in advance
Rizly

Read the 'Propagation of Property Changes' section towards the end of the page for Set_Item_Property in the online help. I'm not sure what you mean by locking automatically but perhaps it's because of this.
You should also ensure the item you're setting to invisible is not the current item (check :system.cursor_item and go to a different item if necessary).

Get the value from another node.

Hi, expert
In the component BT131I_SLS , I create a enhanced attribute in the node: BT131I_SLS/Details BTADMINI
Then i define the GET-V method to create a search help for the attribute.
Now , i want to pass a BP number to the search help function to filter the data.
We need to get the BP number as below:
When create a order, we input the product id ,
then there will be a popup window , we can choose a vendor in the window.
The vendor number is the value which we want to pass to the search help.
How can i do that ?
Thanks.
Oliver.

Hi , expert
Can i use the 'get_related_entities' to get the value I need?
I think maybe i can use the method to get the value from another view which is not in my component.
Now I write codes in the GET-V method, as below:
method GET_V_ZZZFLD000011.
DATA:
    LS_MAP    TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING,
    LT_INMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB,
    LT_OUTMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB.
DATA: LV_PARTNER_NO TYPE CRMT_PARTNER_NUMBER.
data: lr_current TYPE REF TO if_bol_bo_property_access,
        lr_entity TYPE REF TO cl_crm_bol_entity,
        lr_col     TYPE REF TO if_bol_bo_col,
        value      TYPE string.
lr_entity ?= me->collection_wrapper->get_current( ).
lr_col = lr_entity->get_related_entities( iv_relation_name = 'Relation_Name' ).
lr_current = lr_col->get_current( ).
* value =
LS_MAP-CONTEXT_ATTR = 'EXT.ZZZFLD000011'.
LS_MAP-F4_ATTR      = 'LGORT'.
APPEND LS_MAP TO: LT_OUTMAP.
* LS_MAP-CONTEXT_ATTR = 'EXT.ZZZFLD000011'.
* LS_MAP-F4_ATTR      = 'LANGU'.
* APPEND LS_MAP TO LT_INMAP.
IF SY-SUBRC = 0.
ENDIF.
CREATE OBJECT RV_VALUEHELP_DESCRIPTOR
    TYPE
      CL_BSP_WD_VALUEHELP_F4DESCR
    EXPORTING
      IV_HELP_ID                  = 'ZHELP_ZSAKCDD'
*      IV_HELP_ID_KIND             = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_COMP
      IV_HELP_ID_KIND             = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_NAME
      IV_INPUT_MAPPING            = LT_INMAP
      IV_OUTPUT_MAPPING           = LT_OUTMAP
      iv_trigger_submit           = abap_true
*      IV_F4TITLE                  = ' '"#    EC NOTEXT
endmethod.
But i don't know the Relation_Name which i can get the vender's information.
Another question : i want to trigger the code 'get_related_entities' when i click the search help,
                               How can i do that ?
Thanks.
Oliver.
Edited by: oliver.yang on Aug 7, 2009 5:56 AM

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

SSRS Parameter value from another parameter

Hello Everybody,
I have a parameter that I need to get it value from another parameter.
The first parameter @rdt is a date - 11/01/2012
The second parameter @mm is the year and month = 2012
I tried putting in a select inside the query but it did not work
SET @mm = (SELECT cast(year(@rdt) as char(4)) + cast(month(@rdt) as varchar(2)))
Then I put it as a default value inside the parameter and it still did not work
=cast(year(Parameters!rdt.Value) as char(4)) + cast(month(Parameters!rdt.Value) as varchar(2))
Any ideas or suggestions ?
Thanks in advance

Hi Msj99,
I have tested the expression provided by
Visakh16 that it works fine , you will get the value as Integer type "YYYYMM", you can also use expression as below to get the string type of @mm (YYYYMM):
=Year(Parameters!rdt.Value)&Month(Parameters!rdt.Value)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Fields required based on a value in another field

Hi,
I am looking to have fields required (Annual Revenues and # of Employees) based on the value of another field (Ownership). Basically, if the value is Public the user is required to enter the Annual Revenue and Employees fields. I thought about using dynamic layouts but the only key field for Accounts is Account Type.
Thanks,
Caryn

Hi Caryn!
I think it is not possible for making #Employees and Revenues required depending on Ownership(as it is a look up field).. it should be possible if you want to do it on any other criteria other than ownership by just renaming the Account Type, Disable all the values of Account Tyope add new values to Pick List and make it driving picklist upon your requirements..
If you require Account Type, create a custom picklist "Account-Type" and add the values.

Id from one table showing value from another

I have an article id (rs_comments.id_com) but I would like it
to take this data and collect the value from another table.
I have joined the two tables with:
SELECT * FROM blg_comment_com INNER JOIN blg_article ON
idart_com=id_art
WHERE valid_com=1
ORDER BY date_com DESC
rs_comments.idart_com needs to be equal to rs_comments.id_art
displaying the value from rs_comments.title_art
How would I go about doing this. There only seems to be an
option in DW to do this with a dynamic list/menu but I just want to
display the text without option to change it.
Any help much appreciated.

i was stupid. The answer was staring me in the face. No
wonder no-one bothered to reply...

Trigger a Message based on a value from another Interface.?

Similar Messages

Maybe you are looking for