Trigger Event based on Execption

Hi, Does anyone know if it it possible to somehow trigger an event (not an alert) based on a query exception or query result value? I have a process chain that I want to execute only if a query exception occurs. I'll be damned if I can't figure this one out.
Thanks,
Ken Murray

Hi,
Or you can create a program that call function module BP_EVENT_RAISE. If you search this forum for BP_EVENT_RAISE, you will find a lot of material, including ABAP code to programmatically trigger an event
-->Create a back ground event in SM64
-->Create a process chain in RSPC.
-->Use ABAP Program as one process in creting process chain for your cube data load.
-->In that ABAP Program CALL FUNCTION 'BP_EVENT_RAISE' by specyfying your condition like, execute the following function module for a specific condition(>=, <=..)
-->Specify the event that you created in SM64 in the Export , event_id='xxxxxx '
So when you execute the process chain, say for example load data first to CO Cube and after that process chain executes the ABAP Program.Once the condition is met the BP_EVENT_RAISE function module is going to be executed, where you are actually triggering an event to start the data load for your SD Cube.
Regards,
Hareesh

Similar Messages

Trigger events based on current frame of flash movie

I have a director project with qt video where actions are triggered based on specific times in the video (movietime and/or duration). I am updating this project to use flash video instead of quicktime.
For ease of development, and hopefully minimal coding changes, I'd like to keep that functionality similar, but I can't figure out how to capture the current frame of the flash movie sprite.
Can anyone help? or suggest a workaround?

I can't figure out how to capture the current frame of the flash movie sprite.
You were almost there. Try either of these:
put sprite("flash").currentFrame
-- or
put sprite("flash").frame

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

Generate an Event based on Counter Trigger

Hello,
I have the following part that is already working: a counter (used for period measurement) which is triggered by a digital input. After that I'm reading the data and I'm puting them in a Queue. Here I get an error. The Enqueue Element Vi is providing an error. (Error 1, something with a @ character that is illegal). I've notice that if I disable the trigger for the counter I don't get the error. I'm thinking that this is cause by the delay between the moment in which the Enqueue Block tries to enqueue and the moment in which the counter provides something to its ouptut.
What I want to do is to Generate an Event based on the Counter Trigger Signal and to put all the reading and Enqueue part in an Event Structure. I've tried to do that using an Export Signal - Property Node, but I didn't manage to make it work.
If you have any solution for this (with or without events - I just want to get rid of that error) please let me know.
PS: I have Labview 8.5.1 and the USB-6210.
Thanks,
LostInHelp

Hello Mike,
Thanks for your replay.
I've attached two vi files. In one you can find how I've tried to generate an event based on the counter trigger (test.vi).
The second one (test1.vi) is the vi where I get the queue error. I've deleted from the second vi the part where the data are dequeue and handled.
Thanks
LostInHelp
Attachments:
test41.vi ‏50 KB
test110.vi ‏35 KB

How to I trigger an event based on the status of a pushbutton?

I am trying to trigger an event based on the ON/OFF status of a pushbutton. When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically. Is there an easy way to accomplish this?
Many thanks.
Solved!
Go to Solution.

Well, lets read the original question:
diarmaede wrote:
I am trying to trigger an event based on the ON/OFF status of a pushbutton. When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically.
I cannot see anything about "switch until released", only "click to ON" and "OFF manually or programmatically". That seems to be a plain switch action.
JHourigan wrote:
If I want to simply detect a button push event. I set the mechanical action of the boolean button to switch-until-released. Then I use the mouse down event structure on that button to detect the event. It avoids having to include a case structure logic to address the state of the boolean in an Value Change event structure. The button immediately returns to the false condition after release.
So far you are not dealing with the OFF handling at all, which seems to be a requirement. There must be more to it that you mention to get this working as intended. The value of the boolean needs to be constantly monitored anyway, so it might be difficult to do things without a case structure. I am still confused about the logic of it all ....
You should really include a small working example VI so we can see what you are talking about. Thanks!
LabVIEW Champion . Do more with less code and in less time .

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

Event based Process chain issue

Hi,
I have a PC which is event triggered through a program. when i'm trying to run it i'm getting following msg
"Process chain is not responding to the event trigger."
Can someone help me in fixing it and triggering thr PC ?

Hi,
Refer the nice article from SDN and verify if you have followed the process to write the event based PC.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0a41bc6-a7f6-2b10-b3bf-804e1c45ae6c
Regards
Dinesh
Edited by: Jason Lax on May 16, 2011 8:27 PM - Added preferred URL

EVENT BASED SCHEDULER

Hi All,
I have two databases lets say A an B.
I have a STORED PROCEDURE on DATABASE B which runs everyday via a schecduler at 8 in the morning.
This procedure basically picks up data from a TABLE in database A and processes it everyday.
Now I want to modify the scheduler from the current one that runs at say 8 to one that runs the STORED PROCEDURE whenever data is inserted into the table.
Is it possibble in ORACLE?
Datbase version is 10g
Any help would be highly appreciated.

Elessar wrote:
Hi All,
I have two databases lets say A an B.
I have a STORED PROCEDURE on DATABASE B which runs everyday via a schecduler at 8 in the morning.
This procedure basically picks up data from a TABLE in database A and processes it everyday.
Now I want to modify the scheduler from the current one that runs at say 8 to one that runs the STORED PROCEDURE whenever data is inserted into the table.
Is it possibble in ORACLE?
Datbase version is 10gHere is one way of doing it:
Oracle Scheduler - Event Based Jobs.
One way of re-using it is, raising an Event trigger to Kick-off the jobs, preferably once data is inserted into tables. Definitely, this has to be done by the system performing the Inserts.

Event based job

we have a job that needs to be restarted after db reboot,is it possible to create an event based inside oracle that starts the queue and our main job for us ?
v11.2

Hello;
Oracle has an System Event Trigger "AFTER STARTUP" which could be used for this.
"Ask Tom" has a note on this with example :
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:49818662859946
( This shows after logon, but you should be able to use the example with the other trigger )
Best Regards
mseberg
OR
http://www.datadisk.co.uk/html_docs/oracle/scheduler.htm
http://psoug.org/reference/dbms_scheduler.html
Edited by: mseberg on Nov 3, 2011 9:31 AM

No "before new record saved" trigger event in workflow definition ?

Hello,
I have following problem: I have to make a simple integration, where products have information about available quantity of given product . Assume we have field - it is called "Available amount" and it tells how many products are on stock. Now suppose we have created an opportunity, and we want to add Opportunity Product Revenue - we're selecting product and then quantity. I want to make OCOD to display message and prevent from adding opportunity product revenue, when its quantity is greater than "Available amount" field which is present in associated product record. I've created small C# application and used workflows to create Integration events. It works - but not exaclty how I want it - when I add a new record the workflow generates integration event - but I'd like to generate integration event before a record is created, also I'd like to show a notification from OCOD. But for "revenue" we do not have a trigger event called for example : "before new record saved" - we have only "when new record saved" and "before modified record saved".

Hi,
From your requirement, it seems you, want some kind of check. Did you try puting this validation on field level, i guess you would need to join fields and compare in field validation. So, whenever user creates a new record this validation kicks and user is notified of the error.

Need help on event based report scheduling on webi 3.2

Hi All,
I need to add/remove trigger events on scheduled report instances.
I have around 100 scheduled report instances and want to add a event trigger.
I do not want to reschedule all the instances one by one with new event trigger.
Is there any way that i can add event trigger to all the instances at once ?
Thanks,
Alorika

Hi
Can you please tel me hoe to view these report properties in R3.
If I go to schedule, It allows to set a new schedule but I want to view the existing settings.
Please guide.
Thanks ,

I need help with my event-based cue points with audio

Im having trouble with my video game project for my action script 3 class at school. Here is what i did, i made a game called Tailgate toss up. I filmed my character and rendered it in Adobe Premiere. I than brought my .mov file into After Effects and I put event-based cue points-
my first cue point at 0:00:03:13 called "loop"
my second cue point at 00:00:03:27 called "draw"
my third cue point at 00:00:05:24 called "bang"
my fourth cue point at 00:00:13:29 called "dead"
my fifth cue point at 00:00:14:29 called "You Lose"
my last cue point at 00:00:19:14 called "End"
Here is my action script 3 code
///first frame:
start_btn.addEventListener(MouseEvent.CLICK, startGame);
function startGame(event:MouseEvent){
gotoAndStop(2);
SoundMixer.stopAll()
stop();
///second frame:
stop();
var loopTime
var hitHim:Boolean = false;
var vConnection:NetConnection = new NetConnection();
vConnection.connect(null);
var vStream:NetStream = new NetStream(vConnection);
var client:Object = new Object();
client.onCuePoint = onCuePoint;
vStream.client = client;
var myVideo:Video = new Video(418, 480);
myVideo.y = 0; ///this adjusts where the video is, right now it is the size of the canvas which is 418,480
addChild(myVideo);
myVideo.attachNetStream(vStream);
vStream.play("michelle.flv");
var throw_bottle:Sound
throw_bottle = new Sound(new URLRequest("audio/throw_bottle.mp3")); //change to button noise, will add sound into ae file
target_mc.addEventListener(MouseEvent.CLICK, shoot);
target_mc.buttonMode = true;
target_mc.visible = false;
draw_mc.visible = false;
function onCuePoint(cuePoint:Object):void {
   if(cuePoint.name == "loop"){
loopTime = cuePoint.time;
    if(cuePoint.name == "draw"){
var randomLoop:Number = Math.random()*10;
if(randomLoop > 2){
vStream.seek(loopTime);
}else{
setChildIndex(target_mc, numChildren - 1);
setChildIndex(draw_mc, numChildren - 1);
target_mc.visible = true;
draw_mc.visible = true;
if(cuePoint.time == "5:24"){
draw_mc.visible = false;
target_mc.visible = false;
if(!hitHim){
vStream.seek(15);
if(cuePoint.name == "dead"){
vStream.close();
myVideo.clear();
gotoAndStop(3);
if(cuePoint.name == "end"){
gotoAndStop(3);
function shoot(event:MouseEvent){
throw_bottle.play();
hitHim = true;
///my third and last frame
playAgain_btn.addEventListener(MouseEvent.CLICK, playAgain);
function playAgain(event:MouseEvent){
gotoAndStop(2);
SoundMixer.stopAll()
stop();
When I have no audio it works perfectly, no problems. When I bring audio in i re-render it as a .mov file and bring it back into After Effects and add the cue points to it. Than i re-render it out again as a flv file. When i bring it into my flash project it will work when the looping variable does just one loop and my target will appear so you can click on it or not. But when the looping variable makes it loop 2 to 10 times it skips over the catching (the part of the clip if you clip the button) and goes directly to the dropping of the can, not giving you the option of clicking the button. So basically it skips the "draw" or second cue point of my game and goes to "You Lose" cue point.
Any suggestions?

Hi,
The latest audio driver for your machine is on the following link.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

ATV and Photo App: Event based sorting disappeared

With the new update to the new Photo app, I can no longer view my photos from my TV (via my Apple TV) sorted by "events." Everything is sorted only by the actual folders the pictures are in, and since most of my photos are in the iPhotos Library "file" I can't sort these in any useful way.
Please fix this so that I can view the photos using the events based sorting method, which is how I have been organizing my photos for the last several years in iPhoto. Thank you.

Thanks for the reply. I went to iTunes --> Files --> Home Sharing --> Choose Photos to Share...and was able to click on the share "Photos" option from the pull down menu. This wasn't there yesterday so looks like there was an update in the meantime.
The problem is that the photos are shown in chronological order, so it's a pain to scroll all the way down to get to the more recent photos. Hopefully Apple will fix this soon, like the way they had it in iPhotos.

Query on event based job in a client schema and not SYS schema

Hi, I am fairly new to oracle job scheduler and wanted your inputs on how to create a event based job that sends a mail based on success of another job.
I was able to implement this with the jobs being created under SYS schema. I did get email notifcation when errors were logged in exception table.
However, now the requirement has changed to create the jobs under a client specific schema.
The jobs got created successfully in CLIENT schema but the event based job is not working. It does not send the email notification.
I feel this is to do with not correctly subscribing to the event queue {sys.scheduler$_event_queue}.
Can CLIENT schema use the agent "AGENT" created under SYS to subscribe to the Scheduler event queue {sys.scheduler$_event_queue}? CLIENT is the schema in which the all jobs and procedures are created.
BEGIN
DBMS_AQADM.ENABLE_DB_ACCESS('AGENT', 'CLIENT');
END;
--Main Job that will load data and errors will be logged into exception table
BEGIN
dbms_scheduler.create_job( job_name=> 'CLIENT.LOAD_DATA',
job_type=>'PLSQL_BLOCK',
job_action=>'BEGIN CLIENT.p_loaddata;
END;',
start_date=>systimestamp,
repeat_interval=>'FREQ=MINUTELY;INTERVAL=1;',
number_of_arguments=>0,
enabled=> true);
END;
--set raise_events attribute = job_succeeded for main job
BEGIN
DBMS_SCHEDULER.set_attribute ('CLIENT.LOAD_DATA', 'raise_events', DBMS_SCHEDULER.job_succeeded);
END;
--Event Job that will send email based on condition. Condition is checked in procedure CLIENT.p_check_sendmail; If errors are found in the exception table, this job will raise exception and will be JOB_FAILED status. This job will send a email notification.
BEGIN
DBMS_SCHEDULER.create_job (       job_name          => 'CLIENT.EMAIL_JOB',
job_type          => 'PLSQL_BLOCK',
job_action        => 'BEGIN CLIENT.p_check_sendmail;                                   END;',
event_condition => 'tab.user_data.event_type = ''JOB_SUCCEEDED'' and tab.user_data.object_name = ''LOAD_DATA''',
queue_spec        => 'sys.scheduler$_event_queue,AGENT',
enabled          => true);
END;
BEGIN
dbms_scheduler.add_job_email_notification ( job_name => 'CLIENT.EMAIL_JOB',     recipients => '[email protected]',events => 'JOB_FAILED');
END;
Is the way i am subscribing to the event queue correct? Could you please share an example/document of event based job in a schema other than SYS and how subscription is being done to event queue?
Thanks

Hi,
It's a good decision you made because you shouldn't create objects in the SYS schema. I see you're using the add_job_email_notification procedure, so I'm assuming you're on 11g onwards.
This procedure is meant to make the job easy for you. That is, you don't need to worry about setting up AQ, the procedure does it all for you. All you need to do is setup the mail server if not already done, and call this procedure to add the mail notification. That's it.
You can also specify a filter to the add_job_email_notification procedure, so maybe you could specify directly your CLIENT.LOAD_DATA job to this procedure.

Event based decision

Hi every one,
I am working with jcaps 5.1.3.
I am doing a business process to implement timer event, following user guide of eDesigner on page 63.
I want to receive a message on my business process and do anything whit this message, but I want to control timeout while.
I use a event based decision, but when I build my project I get next error:
I test my business process and I found this error is generated when I configure event based decision (message event).
Have everyone an example How implement a timeout on a bussiness process?
Thanks on advanced,
conhector
com.stc.codegen.framework.model.CodeGenException: code generation error at = initializingnull
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1567)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
at org.openide.util.Task.run(Task.java:136)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: java.lang.ClassCastException
at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validatePorts(EInsightCodelet.java:1597)
at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validate(EInsightCodelet.java:1567)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.validateCodelets(CodeGenFrameworkImpl.java:1049)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1542)
... 8 more

Hello,
i become acquainted with JavaCAPS at the moment.
Working with the JavaCAPS Tutorial v2.1, i´m having the same problem like conector.
Trying to built the EAR file in project 4 (Viewing store data), CAPS throws an exception named "code generation error at = initializingnull".
I checked the corresponding connectivity map but everything seems to be ok.
Exception:
code generation error at = initializingnullError details:
com.stc.codegen.framework.model.CodeGenException: code generation error at = initializingnull
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1567)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: java.lang.ClassCastException
     at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validatePorts(EInsightCodelet.java:1597)
     at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validate(EInsightCodelet.java:1567)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.validateCodelets(CodeGenFrameworkImpl.java:1049)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1542)
     ... 8 moreFor help i would be deeply grateful!
Thanks.

Trigger Event based on Execption

Similar Messages

Maybe you are looking for