Trigger invalidations, how to detect cause?
Hello,
is it possible to somehow detect what causes object(PKG/PRC/FNC/TRG) invalidations?
Application users doesn't have righst to compile the object. After invalidation object can be again successfuly recompiled by ALTER XXX COMPILE; command. For example we are using after logon trigger for application users, this trigger gets sometimes invalidated for no obvious reasons, users are unable to login to the database because they're hitting permission denied upon trying to compile this trigger. Any hints on how to detect what is the cause of these invalidations?
Thank you,
D.
Hm, what if I found out that last DDL time with the latest date were the following objects:
SYS.DBMS_STANDARD
SYS.DICTIONARY_OBJ_NAME
SYS.DICTIONARY_OBJ_TYPE
SYS.STANDARD
Similar Messages
-
I just purchased the I 4S and at least once a day, it will say Invalid Sim, what would cause this and how do I fix it?
Then, if there's any data on the drive that you want to keep, you have to back up before you do anything else -- assuming it's still possible.
Basically you have three options:
1. Install a copy of the Mac OS on an external hard drive, boot from it, and copy the data from the internal drive.
2. Start the problem Mac in FireWire target mode (command-T at startup) and connect it to a working Mac with a FireWire cable. The internal drive will mount as a FireWire device.
3. Remove the internal drive and mount in an external enclosure on another Mac.
Once you've backed up, follow the sequence in the support article linked below. The article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running Lion) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
How do I cause a form field to raise its blur event?
I have a web form that displays an editable pdf document. When a user clicks a button the form will get validated. If one of the fields being validated has the focus its value will not get updated when I need to do the validation. For example, if I am validating the First Name field and I type text in it and then click on a button (from the web) to cause validation, the document says the field is invalid because there is no data. If I hit tab on the field to focus a new field the validation works fine. How can I cause the field to get updated? I have tried to create an empty form field and focus to that first but that does not work.
Nope, I have a button on the website that the user clicks to send a validation request.
-
How to detect the content of a Loader?
I would like to create a text field for the user to input the
img URL which will be put into the contentPath of a Loader.
I have a question that how to detect when the user entered a
invalid URL and the loader will load the default image??
Thanks so muchwell if you are using the MCL you can set up a function to
handle the loadError event and trap the error and print it out or
stick a default image in it's place. read up on the moviecliploader
class -
Invalid upgrade mode detected. (UMT 20201)
Hi,
I am in process of upgrading BOXI 3.1 to BI4 on Linux, and below is the command I am trying to run.
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/
export JAVA_HOME=/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/jdk
export PATH=/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/jdk/bin:$PATH
when I run the command
java -jar upgrademanagementtool.jar
I get the following error
warning: ORB.init: unknown property `ooc.orb.policy.request_timeout'
warning: ORB.init: unknown property `ooc.orb.policy.connect_timeout'
Upgrade management tool will now perform a Complete Upgrade.
java.lang.IllegalArgumentException: Invalid upgrade mode detected. Refer to the documentation for a list of acceptable modes. (UMT 20201)
at com.businessobjects.upgrademanager.PageLogOn.onTextModeInvocation(PageLogOn.java:546)
at com.businessobjects.upgrademanager.UpgradeManagerConsole.showPage(UpgradeManagerConsole.java:69)
at com.businessobjects.upgrademanager.UpgradeManagerConsole.open(UpgradeManagerConsole.java:43)
at com.businessobjects.upgrademanager.UpgradeManagerMain.run(UpgradeManagerMain.java:104)
Invalid upgrade mode detected. Refer to the documentation for a list of acceptable modes. (UMT 20201)
thanks
LUZ JANETH IDARRAGA MILLANHi
I am in process of upgrading BOXI 3.1 to BI4 on Linux,It created a script to run based on the KB 1640894 - How to: Linux/Unix Upgrade Management Tool command line, variables are set up java,
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/
export JAVA_HOME=/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/jdk
export PATH=/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/jdk/bin:$PATH
and run the script containing this information
/usr/boMcal/sap_bobj/enterprise_xi40/linux_x64/jdk/jre/bin/java -Xmx2g -Djava.library.path="/usr/boMcal/sap_bobj/enterprise_xi40/java/apps/upgradeManagementTool/jars/" -Djava.io.tmpdir="/usr/boMcal/sap_bobj/tmp" -jar "/usr/boMcal/sap_bobj/enterprise_xi40/java/apps/upgradeManagementTool/jars/upgrademanagementtool.jar" -mode livetolive -source "embera:6400" -sourceusername "Administrator" -sourcepassword "b0cali2010" -destination "rigel:6400" -destinationusername "Administrator" -destinationpassword "b0cali2012" -logfile "/usr/boMcal/test/logs/myLogFile.csv"
get the following error:
java.io.FileNotFoundException: ./upgradeManagementToolSystem.properties (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at com.businessobjects.upgrademanager.bootstrap.UMSystemProperties.<init>(UMSystemProperties.java:34)
at com.businessobjects.upgrademanager.bootstrap.Main.runMain(Main.java:40)
at com.businessobjects.upgrademanager.bootstrap.Main.main(Main.java:225)
thanks -
How to detect USB Flash Drive name in LabVIEW
Hi there
I was looking for how to detect a USB Flash Drive name in Labview
appearently every time i insert USB Flash Drive in a computer, windows assign it a different name
once "J:" and sometimes "M:"
Is there anyway to obtain USB Flash Drive name programmatically in Labview ?
Because in my program an user shouldn't be able to access HDD Drives except his USB Flash Drive (for inserting some file ...)
thank you and excuse me for my poor englishI was able to get the demo.vi to load, but it could not load the other two because there is no block diagram associated with those. I'm not sure why this is. I haven't had any issues with other llbs before.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home -
How to detect a selected row in ALV GRID
Hi,
Can anyone tell me how to detect and catch an event when a row is selected in an ALV GRID?
I would like to catch such event when the end user presses Ctrl + Shif + Space bar.
Thank you and best regards.
Hassane.Hi,
Use this wiki link, to have a checkbox with all the records in ALV Grid and to process those selected records at a user command, as per the requirement.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/alv%252bgrid%252bdisplay%252bwith%252bcheckbox%252bto%252bprocess%252bselected%252brecords%252bat%252bruntime
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir -
How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
Or one script for detecting Plug-in version for major browsers. Need full example code.Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
The script detects the browser type, and the installed acrobat version...
Have a look here:
Detect the Adobe Reader Plugin -
How to detect the path of Temp directory
I am writing a class library which allows users to manipulate a database in the web server java applications/applets. In my logic the Application/Applet communicate with a CGI script/Servlet in the server and that do all the database handling. My objective is to make the Client independant from the Database Drivers, and to some restrictions and possible security threats that can arrice when accessing the database directly.
99% of the work is done and now I am doing the fine tuning.
My Problem:
When the user downloading a blob object from the server database. each time the program read the blob it will get a new copy from the server. This is not good if the blob is large (few 100 megs) . So I am going to implement a cache system. but the problem is If I am caching in the memory it will not support large objects (Memory is a limited factor). So the preferance is use the Temperary files but I do not know how to detect the path to temperary folder.
And my 2nd questions is are the applets allowed to write and read in temperary folder.The Java default temporary file path can be determined with
System.getProperty("java.io.tmpdir")This is typically the same value as the os environment variable -
In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 4 (beta)Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on. -
How to detect color pages in a PDF?
I am using a C++ Acrobat plug-in do read/edit a PDF file.
I need to get the total number of pages in the PDF as well as the page numbers of color pages.
So far I have been able to get the total number of pages using PDDocGetNumPages() without any trouble.
However, I cant seem to find an API that lets me know whether a particular page is color or not. Is there a way to do this?
Thanks in advance!But what if there is RGB data that means black or gray (R == G == B), does that mean black or RGB?
There is some sample code in the SDK for iterating over the content in the PDF, and then you can get the colorspace and the color of each object.
But you really need to do some background research on colors & colorspaces to properly achieve this goal.
From: Sachintha81 <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 8 Feb 2012 16:57:10 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to detect color pages in a PDF?
Re: How to detect color pages in a PDF?
created by Sachintha81<http://forums.adobe.com/people/Sachintha81> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4194889#4194889 -
i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?
Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims
-
How to detect the HTML extension window close in In-design? Does the In-design throws any event on opening/closing of extensions?
I have a HTML extension running in In-design CC 2014 version.
I want to perform some required set of actions before my extension window is closed(by clicking on the cross button on top right corner).
Does In-design throws any event for it? Or can we capture it using C++ plugin in some way?Naah.......haven't got any event for that yet.
Although, since HTML extensions are using chromium browser, as a workaround, u can attach listener to HTML onClose event, but it won't solve any purpose if you
are looking to logout session or do some business login in your code. -
How to detect the final loop iteration of a step in a PostStep Engine Callback?
I see the need to use a PostStep Engine Callback and look at the Step.Result container of the caller.
My issue: If the caller is configured to loop, the PostStep Engine CB executes with each iteration and I do not see how to detect the final iteration (which is the only iteration I am interested in).
Ideas are welcome. Thanks in advance,
GuenterGuenter,
well, the way i discripted IS the generic way. The reason for this is the following:
You can compare TestStand very well with procedural programming languages. So you have variables with different lifetimes and scope. RunState is one variable, which is available in every scope, but it may have different content.
So you leaving the execution of your clientsequence in order to call the callback, you leave the scope of the RunState from your clientsequence. But only there the information is stored on how many iterations are left. It does not make sense to pass this anywhere, since the execution of your clientsequence has to decide if to loop further or not.
But, please note that there are different scopes for the "disable result recording" as well. You have found the most global one, the station option. But you can as well set this in the sequence settings (Edit >> Sequence Properties >> Disable Result Recording for All Steps) and at step-level (Run Options >> Record Result {uncheck it}).
Looping on a single step using the step settings, you can additionally choose not to record results for each iteration. This will lead to only a single entry in the ResultList, the overall result of the looped step (if resultcollection is enabled of course!).
hope this helps,
Norbert
Message Edited by Norbert B on 08-22-2008 02:10 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
How to detect the end of a loaded swf file
Hello Guys
This is my first time on this forum, come here with a great
hope
I have loaded a picture file (jpeg) and a video file (swf)
into the main flash file using xml
on frame 3, I load the picture and on frame 7, I load the
video, there is a stop action on frame 6
Now when the flash is executed the picture is displayed ( it
says "Click here to view the video")
when the user click the picture , the video is loaded and
starts to play ---- so far everything is working fine
now what I want to do is, once the video finishes playing (
not stoped) I want to display the picture again
can you tell me how to detect the end of an external loaded
swf files,
Please help me
Thanking You
Shriram
Maybe you are looking for
-
Cluster database control showing instances down
I have created a two node cluster in windows 2k3 x 64bit and therefore cant use my grid control as there doesnt seem to be an agent for it, therefore am using the DBconsole instead. on the welcome window its showing both instances as down, but i know
-
Automate renaming files within zip archive
I have a large number of files where I need to do the following: Change the file extension to .zip. (The files are zip archives but with a special extension, and all of the files have their own extension, ie .xx01, .xx02, etc...) Extract the zip file
-
Loading many multiple assets crashes iPad in AIR 3.3
Hey, I'm working on a port of a large application to iOS. One view state is a world map view that loads multiple (100+) assets. This worked fine in AIR 3.1, but as soon as the view state is changed in AIR 3.3 the iPad (not just the app) freezes, cras
-
Accrual document configuration steps
Hi expert can any one give configuration step for accrual and deferral document (prepaid expenses) regards krishnamohan
-
I have a linksys WRT54G wireless router. I use it for my macbook and two other imacs at home. The internet speed (i mean the time it takes to load a web page) is so much slower on my macbook than on my imacs. I think it is a configuration problem. I