Trigger Material Exchange in Migo

Hello,
During Goods Issue Process we can not see the button - "Trigger Material Exchange" in Migo transaction.
The material which we use is interchangeable.
Please advice us what should we check or configure in addition to get access to this button in Migo?

Thank you for answers, collegues.
1) learnNew, I have checked and fulfilled the steps under "Settings for Material Exchange and Restricted Interchangeability"
2) As to your answer, udayareddy, the fact is I cannot do these steps mentioned there due to absense the icon Trigger Material Exchange in Migo.
Moreover, to my surprise I can not see in Customozing under Interchangeability of Parts the following steps:
® Set Up Screen for Material Exchange in Goods Movement Transaction (MIGO) ® Screen Settings ® Serial Number Determination. Obviously, Something is not activated yet. But what?
In fine, I still can not use material exchange in MIGO.
Please help again!

Similar Messages

Want to trigger the workflow from MIGO

Hi Experts,
I want to trigger the workflow from MIGO transaction and should handle the created material document number (i.e. I am doing the goods receipt for the process order, when he post it, the material document details (material doc number) should be mailed immediately when it is created). Please give me the suggestions for the same.
Thanks & Regards,
Ravi.

Dear Ravi,
Please refer this link [Trigger workflow from MIGO tcode|Trigger workflow in MIGO Tcode;.
KR,
Bharath

Supersession(material exchange)in 3rd party PO(DIMP/IS Auto)

Hi,
Could anyone please tell how the material exchange is handled in supersession for 3rd party PO?
I tried to do material exchange in PO created against a sales order and I got the error message MPN01032 (This function is only possible for certain item types/The material exchange functions do not support the item category selected for the main item).
I believe the change should be done first from sales order to PO. For this the item in PO needs to be deleted. I am not sure if this is the correct way or if anything I am missing. How this can be handled on a daily basis by an interface ?
Your help would be much appreciated.
Thanks in advance,
anand

Hello Anand
Did you ever get to the bootm of this - I have exactly the same issue?
Any assistance would be greatly appreciated.
Regards
Tony
[email protected]

Return material- difference between MIGO(Returndelivery) and MIGO(GR -PO)

Hi friends,
What is the difference between the MIGO(Return delivery against material document) and MIGO( Goods Receipt against purchase order).
SAP Best Practice for Return material to vendor is to create return PO,MIGO against PO and perform credit Memo,if invoice received against PO.
What is the use/purpose of MIGO(Return delivery against Material Document) and MIGO( Goods Receipt against return PO)
Thanks

If the vendor is picking the return goods than you can retrurn agianst the materal document but if you are liable to return the goods than you can use return Po so the same qty will get opend in the main po and you can use the shipping functionality also.
e.g. if you have to pick, pack and ship.

Material Document in MIGO

Hello,
I processed a good receipt on MIGO with mvt code 101. I use MIGO transaction code, but when I display the material document in MIGO, in Doc Info, SAP shows that Transaction code MIGO_GR has been used.
Is there a way to make SAP show the transaction code actually used by the user, and not the one corresponding to the mvt code?
thanks,
Laure

Hi Laure
This is a standard behaviour. MIGO_GR is just a view of MIGO. When you select, Good receipt in MIGO, system takes it as MIGO_GR.
Best regards
Ramki

How to trigger Material CIF change pointers when changing Source List

I need to trigger a Material Change pointer (CIFMAT) creation when the Source List is updated for that material. In BD52 (ALE configuration) table EORD is not an option for CIFMAT message type, so by standard ALE this can not be done automatically. I could not find any BAdI/Userexit which will help me to create a material master change pointer so that the Material (Product) will be sent to APO via the CIF when the Source List in R/3 is changed.

Hi , Can you please check user exit CIFMAT01 function module EXIT_SAPLCMAT_001.You can use this enhancement to influence the logic according to which material data from SAP R/3 is mapped to APO product interface data.
I suggest to put logic in user exit to check table source list table EORD changes & trigger CIF for material master.You can pull change data from table CDPOS using EORD table reference & material object value details.
Based on change record CIF user exist should trigger material CIF run and feed to APO.
Hope this solution will work in your case.thanks
Sanjay Karkun

How to avoid changing material type in MIGO & J1IEX ?

Dear all,
How to avoid changing material type in MIGO & J1IEX ?

hii
i think u asking about the , if the material is excisable , then it will ask for material type , not all material type , onle like asset , raw material, consumable, non cenvatable , finished oods and tools.
There i hope its standard SAP system setting , because some time the if do consumable procurement with excisable material .
While doing Gr or J1IEX system will consider that material is capital item, that we cancahge to raw material and we can utilize the cenvate credit in the same year .
so it cannot be hide or making gray mode is difficult in practical.
So revert any clarification
Thanks

Material Replacement in ECC, Material Exchange in 46C

There is this material replacement icon in ECC6 Item details.
When it is pressed, it copied the whole line item and create another record which refer to the original line item as higher level item.
Nevertheless in 46C, Material Exchange button, there will be error: "Material XXX has no defined relationship with Material XXX"
Questions:
1) Is this change of standard behaviour from 46C to ECC6
2) how to define the relationship
a) in 46C
b) in ECC6
3) how to change the ECC6 setting so that it will behave like the 46C with error

X-plant material status=blank in BD1 view of Mat Master
plant-specific material status=blank in Purchasing view of Mat Master
MM06=No entries
Anyone with a clue?
Regards,
Lars

Cancel material exchange via ADSUBCON - subcontracting flow

Hi all,
I'm facing an issue related to the subcontracting process. Actually, a key user made an material exchange via the T code ADSUBCON and SAP system has created automatically a sub item line into the PO (item line 11 against its higher level item 10). Afterwards, the user has noted he made a mistake and now he wants to cancel the material exchange. He tried to cancel the sub item line 11 directly into the PO but SAP deletes also the higher level item 10.
My question is : How I can cancel the material exchange without deletion of the higher level item from SAP system ?
Thanks for your help.
Regards,
LYD

Hi,
If I set the deletion indicator to the sub item selected, the whole item gets deleted in the PO by SAP. but actually we do not want that SAP deletes also the main item. We need to keep this main item.
The customer would just like to reverse a material exchange made with T. code ADSUBCON.
I've just try with material without serial number it is working via T. code ADSUBCON. The deletion indicator is set only on the sub item into the PO. This is what we expect but when we try with material which has serial number, all item lines of the PO get deleltion indicator set.
Regards,
LYD

Material exchange in a PO for a parent child relationship

Hi ,
Please advise if there are SAP provide any solution for material exchange in a PO for a parent child relationship? I.e the two materials are NOT maintained as interchangable materials.
Thanks.
Regards,
Clarice

hello
Do you mean exchange agreements/contracts where two parties are buyer & seller both to each other. This is well supported by Std SAP.
Pls correct me, if I am not getting it correct.
Ganesh...

Exchange Rate MIGO

Hi There,
We have a requirement from business which goes like this - For Import Purchase the Exchage Rate to be applicable should be by the Bill of Lading date i.e when the vendor has shipped the material. As per Standard SAP the Exchange Rate at the time of GR is picked based on the Posting Date. Can anyone suggest to how to go about it.. The Bill of Lading date is not the GR Posting Date because it takes few days to recieve the Material and perform GR in system, but the exchange rate should be captured based on the Bill of Lading Date.
Please suggest.
Many Thanks.

Hi Mallinath,
The Scenario is suppose we are creating a PO today (i.e June'5,2014), the exchange rate in the PO will be as of today (cannot mark as exchange rate fixed!!). The GR is done let's say on June'15,2014. Along with the GR Vendor sends a BL copy, the date of BL is say June12,2014. So now here.. GR will be done on June15,2014 but the exchange rate should be applicable as of June'13,2014.
Appreciate if you can provide with any idea about how to deal with this..
Many Thanks

'How to trigger Material determination again' when Price group changes

Hi All,
I have a requirement like this
1. I have a line item for which the material detemination is done based on condition records.
Say the order has been saved now.
2. Now, for this line item if I change the price group (Double click on line item ->Sales B), the material dermination should trigger again.
3. I know that the FM PRODUCT_SUBSTITUTION would be used to determine the material.
4. But, where exactly should I call this again?
Please let me know if there is any user exit available for this.
Thanks,
Babu Kilari

No. I have not got the solution for this. Luckily, requirement got changed. So, couldnot invest much time on this.
But, I think you need to write the code in MV45AFZZ(USEREXIT_MOVE_FIELDS_TO_KOMP). Not sure. Please check it
Thanks,
Babu Kilari

Trigger Material Delta Load by changing characteristic in R/3

Hello,
We added some functionallity to our R/3 and CRM system in order to map the R/3 characteristic data to CRM attributes (which are added to the product master). During the initial download of materials this works fine.
The delta download is triggered when I change something in the Basic Data or the Sales Org. data in transaction MM02 on the R/3 site, but NOT when I change something in the Classification tab (which holds the characteristics).
Does anyone know how to trigger the Material Delta Load when changes in the Classification tab are made?
Thanks,
Jeroen

Hi Pat,
Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
Use R3AS4 transaction to execute the same.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Error while cancelling the material document. MIGO

i am getting following error while cancelling material document
You cannot cancel GR, since inspection lot is already partly posted
Message no. QA046
Diagnosis
You are attempting to reverse a goods receipt although quantity postings have already been made from the inspection lot. This means that stock for the goods receipt has already been transferred and, for this reason, a cancelation of the document is no longer possible.
Procedure
Ensure that the postings in QM (within the usage decision transactions) are carried out.

hi,
You can't do cancellation here just because you have given some lot/qty to QI:
2 ways:
1. Don't do cancellation, make returns for the rest of the qty...
2. Take back the qty in the Unrestrcited stock back and then try to do cancellations...
Regards
Priyanka.P

Error in Printing Material Document in MIGO (movement 561)

Hello everyone!
Kindly assist me with this. We are trying to print an output document in MIGO. We have set up the Output type WA03 in NACE and in MN21. When we started printing the document, an express message was generated stating that:
Update was terminated
System ID....   E6D
Client.......   100
User.....   MANTOML
Transaction..   MIGO
Update key...   4A08E8ABA95D0096E1008000C0A81447
Generated....   14.05.2009, 15:00:26
Completed....   14.05.2009, 15:00:26
Error Info...   TD 427: Element KOPF
Thank you for you assistance.

Hi,
Please check whether you have defined your element and window properly.
This type of error occurs only when they are not defined properly.
Regards

Trigger Material Exchange in Migo

Similar Messages

Maybe you are looking for