Trigger points for the first operation

Hi,
We want to use triggerpoints on operations in PP. We want to set the status on the first operation to be released when we create an order. The problem is that systemstatus CRTD can not be used. Can someone help out how to get the first operation to be release automatically when the systemstatus is set to CRTD?   Thanks Marie Hillerbo

Hi Marie,
I dont know if this would meet your exact need.
Based on my knowledge what you could do, is flag the order to release when it is created & saved. Assign a trigger point to the first operation, such that only on confirmation of the first operation you release the subsequent operations.
Hope this is of some help to you.
Rgrds,
Vivek

Similar Messages

  • Trigger point for the quantity

    hi all
    In routing i have maintained trigger point function . I assigned reference operation set( lot size 0 to  1) . for system status 'pcnf'. My question is with example-
    I have to produce 15 pieces .
    I assigned trigger point to 2nd operation.
    Now while iam 2nd operation( i have to  confirming piece by piece)
    while iam  confirming 1st  piece a pop has come for rework operation i said yes. rework operation is triggerd . but it is triggered for all 15 pieces where as it should be only for 1 piece.
    I want the operation should be only for 1 piece. how to proceed.
    please help me
    thanks in advance
    anitha

    Hi,
    I can explain how an rework order is created with
    reference op set.
    First check in Tcode OPJF for the selection id a
    Priority is defined for the Task list type S
    with usage 1 and status 4 and then Proceed as
    follows.
    1. First create a Reference op set in tcode Ca11.
    Enter the plant,Description , usage and status
    for the ref op set
    Enter lotsize and unit of measure.
    Enter the op as 0010 / workcenter/op control
    key/Description for the op
    Enter the standard values and save.
    2. Create a Standard trigger point in CO31.(Ex
    Production)
    Enter the Trigger Point usage /Group as FERT.
    3.Tick the Trigger Point Functions.
    4. Enable the indicator create order with Reference .
    5.Enter the system status as PCNF.
    6. Enter change as +.
    7. Enable the indicator once.
    8 . Now place the cursor on the create order with reference.
    9. Goto Parameters.
    10. In the Parameter enter in the group the created Reference op set group no.
    11. Order type as PP01 and group counter as 1 and save the Trigger Point.
    12. Now goto the Routing for your Material.
    13. Choose the last op to assign the Trigger point.
    14 .Select the OP -
    > Goto ---> Trigger Point overview.
    15. Enter the Trigger Point usage as FERT.
    16.Now choose that line ,select the Details---> Trigger Point
    17. The system will says standard trigger point exists from which you can
    select the created Trigger Point (EXx Production)and save.
    18. MD02/MD04.
    19. Convert the Planned Order into Production Order and Release the order.
    20 .Now confirm th ops.
    21. For the last op enter the yield and rework qty
    and set the status as PCNF.
    22. If the status of last op is PCNF then in the
    system a POP UP will appear as Activited by
    Trigger Point /Create order with reference/order
    number/sequence and op number which trigger point
    works and enter.
    22. Now a rework order will be created.
    23. In c003 enter the number which is next to the actual prodn order no.Rework
    order will be seen.
    Regards,
    nandha

  • Configuring shipping point as Trigger point for posting outbound idoc

    Hello All,
    I have a requirement that on saving an Outbound Delivery(VL02N), an Outbound Idoc should be posted...but the condtion for posting the idoc should be its shipping point. I am not sure how to configure shipping point as the trigger point for the idoc.
    Please suggest.
    Thanks for your co-operation.
    Regards
    Anand

    Hi Anand,
    1. Go to transaction: NACE & select application V2 and click on output types.
    2. change display <->Change mode.
    3. select LAVA and press F6 (to copy Standard output type LAVA to ZLAV).
    4. Give ur Z name for the new custom output type.
    5. change access sequence from 0005 to 0012(shipping point).
    6. Press ENTER and click copy all.
    7. Now goto trasaction VV21, give the created output type name. ENTER
    8. Maintain entries, shipping point, customer#, Medium as '6' ...etc
    Now try VL01N with the given shipping point and check the output ZLAV has been triggered or not?
    Let's see, if we miss any configs still!
    Keep this as reference:
    http://www.erpgenie.com/sapedi/messagecontrol.htm
    Reddy

  • I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • I used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos?

    i used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos? This also the first time that I'm using the apple support communities.

    You can import the videos and photos using iPhoto or Image Capture on your Mac.
    Connect the iPad to the Mac with the cable and launch either of those two applications on the Mac. Your iPad should appear as a device in the left side of the app. Click on the iPad name and then you should have access to all of the photos and Vidoes in the camer roll and you can import them onto the Mac.
    Im not sure what the reference is to Power Point in this case. You can use the imported photos and videos in a Power Point presentation after you import them to the Mac.
    Are you trying to create a Slide Show on the iPad? Is that what you mean by a Power Point presentation?

  • Anyone still up? I just purchased from the itunes store for the first time, and don't know how to get them downloaded to my ipod.

    Sigh.....really late and I want to go to sleep, but I just purchased some Itunes online for the first time, and I don't know how to download them to my ipod. I've never done it before, and it shouldn't be rocket science, but I can't find anything that tells me where to go to download my songs. It said something about check purchases, but I can't even find that screen.  I connected my ipod to the computer, and now it says CONNECTED...EJECT BEFORE DISCONNECTING. My BF set up the acct when he bought my ipod as a gift, and as I bought these songs for a special weekend I have planned I can't ask him how to do it.  HELP!  For some reason the password I always use is not recognized for my account... and since I can't get anyone from itunes without a proper log-in I'm at the mercy of all of you more versed in tech and itunes than I.  Is anyone still up that can help me out?

    It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
    You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

  • Building a system for the first time

    I recently posted a few weeks back about buying a system from either Dell or HP http://forums.adobe.com/thread/732545?tstart=0.  I quickly learned that those systems were not going to fit my need based on my budget.  So, I decided after researching components that I will build a computer by hand for the first time.  I am still operating on a budget of around $1000, but I'm giving the budget a bit of flexibility so I don't limit my options.  I am a hobbyist who only has experience using Power Director on my laptop, but I had a lot of fun editing for the first time and I want to step up my game.  With the new system, I plan to use adobe premiere cs5 and after effects.  I will capture my video from either an HD Helmet cam or HD flip format is  MPEG-4 AVC/H.264.  So where I need help is selecting the right things to optimize my performance.  The following is a list of items I'm looking with their prices.  Please help me decide what will be right for me.  Open to any combo of suggestions or comments. Thanks!
    Processor
    Intel i7 930 $200 microcenter
    Intel i7 950 $230 microcenter
    I don't know if I want overclock yet, but it sounds like a good idea.  $30 for the upgrade to the i7 950 seems pretty good. ro do I use the money elsewhere?
    Motherboard
    GIGABYTE GA-X58A-UD3R $210
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813128423
    Seems like a good mobo. Are there any features that this board lacks that I should look for in another board? Also, newegg offers significant deals on "open box" products.  Is this a good way to go?
    Ram
    I have a few questions for this selection.  I've currently budgeted approximately $250 for ram.  I'm looking at going with 12GB.  I certainly don't have the budget for 24GB, but what about 16GB?
    Do I look for 1333 or 1600?  2GB or 4GB sticks?  Would I be fine if I bought say 2 packs of 6GB ram, both same manufacturer and same type or would I want to buy 1 pack of 12GB?
    GPU
    Nvidia Geforce gtx 460 1GB $220
    Is it worth it to go to the 470? I know it's a better card but being a budget is really worth the upgrade or can I get away with a 460?
    Any recomendations for a 460 as there are many in the same price range?
    Drives
    I see these drives priced in the $55 range which would leave at around $220 for the lot of em
    These are the drives I'm looking at as they are highly recommended on this board:
    SAMSUNG Spinpoint F3
    WD Caviar Black
    Right now, I plan to buy 4 drives.  Do I want 4 of the exact same? or say 1 cavier black for os/ programs and 3 samsung f3 for pagefile/scratch/renders?  Can I also get a brief description of what these are too?  Also, could have a 500gb for os/programs and 1tb for the rest or would it be advisable for 1tb for all? or 500gb for all?
    I don't think I can do a raid setup based on my budget, but I saw this as an option on the thread for storage rules is to use the on-board IHCR or Marvell chip.  I don't know really anything about this, but what would the price be to explore this option?
    Case
    Cooler Master Storm Scout $90
    http://www.newegg.com/Product/Product.aspx?Item=N82E16811119196
    I picked this case for a few reasons.  I seem move about every 6 months so the handles on top would be very useful, and it seems to have good cooling.  I know a full size case is recommended, but they seem to be significantly more.
    Cooling
    Noctua NH-U12P SE2 120mm SSO CPU Cooler $75
    Everywhere I look this cooler seems to get great reviews.  I figure it could be a good idea to get a good cooler if I get a mid-tower case.
    The only other option I can think of for case/cooling is to combine the budgeted price for both and look at different options like a full size case with a less quality cooler. Is this a better option
    PSU
    Looking into an 850 W power supply.  I figure to budget $80 towards as I've seen a few in that range
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817517003
    so would something like this work?
    Final Thoughts
    So, when you add it all up its about $1350.  First question, how does this look overall?  Nothing I've chosen is obviously overkill, but is there anything I can afford to go cheaper on? or anything I should invest more into?
    Thanks again to everyone for the help.  The resources, info and people on this forum have just been awesome.

    Seems like we are planning very similar PCs.  My build is going to be for: amateur video editing including animation mainly with CS5, application design and coding mainly with MS Visual Studio 2008, HTPC (until I build a cheap dedicated unit for the TV), general family computing.  I am new to this stuff, but can at least share some pricing and my decision making process so far.
    Here is what I have selected so far regarding the parts:
    MotherBoard: Gigabyte GA-X58A-UD3R x58
    Seems like one of the lower cost x58 MBs and has some decent reviews.  Wait for a sale, you should be able to find this for around $180.00.  That is how much I got it for from New Egg (straight up with savings code no rebate), should be arriving on my doorstep tomorrow.  Also, I think Fry's has it now for $170.00 in store, but that includes a $20.00 rebate and tax. 
    PowerSupply: Corsair TX650W
    Some might think this is on the low side.  On the other hand, I have gotten other conflicting advice, stating that many people overestimate their actual power needs.  So who knows.  I have read that a PSU works more efficient when it is matched to the power needs - meaning that a 1000w PSU that is generally seeing 200w usage might not be so efficient.  Anyway, I got the PSU for $50.00 from New Egg (with rebate), and it has a good reputation, so we will see how it goes.
    Graphics Card: GIGABYTE GV-N460OC-1GI GeForce GTX 460 (Fermi) 1GB 256-bit GDDR5
    I was planning on a lower cost card, but then noticed this card for sale over the weekend for $178.00 (with rebate), so I ordered one.  I have read the GTX460 has reasonable power requirements, and can be made to take advantage of CUDA/Mercury with CS5 (although haven't done much research into that).  This particular version based on reviews, seems fairly quite with the twin fans. It's possible I overspent a bit on this card considering my needs, time will tell.
    Here is what I am planning to purchase:
    CPU: i7 930
    I am fortunate to live near a Fry's and MicroCenter ($200.00).  From reading the forum, seems like this is generally the lowest CPU folks go in terms of building an editing machine.  I understand the argument that for only $30.00 more, one can upgrade to the i7 950.  On the other hand, that argument could be made for many of the components, and then before you know it, a little extra here and there, and the budget is shot:)  So I am planning to draw the line at the 930.
    Here are my undecided’s:
    Memory
    I am up in the air between 6or12gig/module compatibility/cost.  But one thing for you to keep in mind, is the official memory certified for the motherboard you select.  For the Gigabyte motherboard, I missed out on a recent RAM deal, because the RAM was not officially certified for the board.  Some people tell me this is important, while others say "RAM is RAM" and no big deal.  Something to consider.
    HardDrives
    Same as you, considering the Samsung Spinpoint F3.  Good prices now at MicroCenter on the 16MB cache models in 500 and 1TB sizes.  I just don't know if larger cache sizes are important or not, since they are also offered in 32MB and higher.
    Anyway, good luck with your build and hope it works well.

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

    I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

    mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
    Not sure where these hard disk folders are located that you are referring to?  Finder, Finder tool bar, Finder side bar, Desktop, Dock? 
    More then likely they are  an alias that not longer point to the orginals,  thus the question mark.
    I would reboot.  Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

  • I plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    i plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    Hello there, Shellywms09.
    The following Knowledge Base article points out why you are receiving that message on your iPad:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • How do I accept the Terms and Conditions when trying to set up an Apple ID for the first time ( using my iphone)?

    I am trying to create an Apple ID by using the Itunes icon on my iphone 5s for the first time. It opens up a screen with the 54 pages of Terms and Conditions and it does not allow me to even accept the Terms and Conditions... no Accept option or place to click!
    The only option is to Send the terms and conditions via email... which also does not work...it keeps asking me to "try again"... Has someone else had this problem?

    Hello, Wyseup. 
    Thank you for visiting Apple Support Communities.
    Most likely this email address has been attempted to be setup as an Apple ID at some point.  You can reset your Apple ID password via the steps in the first article below.  If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I want to create for the first time ever an iPhoto library on my Mac Mini from all of my seperate external hard drives over the years. Instead of filling my Mac Mini hard drive space with all of the pics can I import it to a seperate Apple hard drive.

    I want to creat for the first time on my Mac Mini an iPhoto library. I have many seperate hard drives with pics I want to import but are concerned I will fill the hard drive with pics alone. Can I install the pics on one larg (1TB) external apple hard drive and use iPhoto functions still with the pics being installed on a seperate drive from the iPhoto OS?

    This is our resident iPhoto guru, Terence Devlin's, advice:
    You can move your iPhoto Library to an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Once that is done you can import directly into the iPhoto library on the external HD.

  • Hi can anyone please help me! My I phone is in recovery mode i lost it and it was returned to me fully working. I ran an update and it shut down. I have loads of pics and vids of my little girls including my youngest counting to ten for the first time.

    Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time.
    Can I recover these files or have I lost them? I lost the phone last week and it was returned working but with an update to install I did this and it shut down.
    If anyone can please help I would be eternally in your debt I have loads of sentimental pctures in here but cant get to them.

    Sorry, but if it's in recovery mode, anything on the phone is already gone. If you had PhotoStream turned on, hopefully the photos will still be out there.
    You have no choice at this point but to restore from your last backup.

  • I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages.  I recently signed into iCloud for the first time.

    I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages.  I recently signed into iCloud for the first time.  Any idea how to get the notes back?   I really dont want to lose them.

    It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
    You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

Maybe you are looking for