Trigger points is not working

Hi;
I have an order.It has three operations 0010-0020 and 0030.
Operation 0010 has a trigger point which TRIG1
I choise;
- Release succeeding operations is activated
- System status : PCNF-Partially confirmed
- Change: *
- Activate: 2
I release operation 0010 and go to CO11N and partially confirmed the operation.
However the succeeding operations is not released.
Where am I wrong?

Hi,
I guess you have flagged the check box once in trigger point defn, uncheck the same & then proceed.
Regards,
Vivek
Added
If am right you want to trigger a rework order for each PCNF, so in this case, set the Activation indicator to 2, then you can trigger the rework order each time manually.

Similar Messages

Mouse pointer is not working correctly

I have a MacBook Pro and the pointer is not working correctly. It does not work smoothly and it is hard to get it to go where I need it to go.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

Why Vanishing Point is not working in PS CS3 as it was showing in the tutorial Disk?

Vanishing Point is not working in PS CS3. I was trying 10s of time or may be I am not working right. But whatever it says and showing in the Tutorial Vedio, not happening that easy. Or it does not cover in the Photoshop CS3. Because that's the way its look like now. does anybody know how can we make it work possible?
Thank You.
jeevan.

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

Break Point is not working on Web UI

Hi guys,
i have a problem with Break Points in combination with the Web UI:
After setting a Break Point in a Function Modul or Method and starting and working with the Web UI the Break Point will not reached. So the Debugger does not open. When i activate the Debugging with the Transaction Code SICF the Break Point is working normaly and the Debugger opens. But ater 30 min the Break Point will not work again. After activating the Debugger over SICF again very thing is ok. Thus i have to activate the Debugger with SICF 10 times per day.
Could somebody tell me how to fix this Problem? I would like to activate Debugging permanently.
Thank you very much. And i am sorry for my bad english ^^ I hope you understand my problem. Don't hesitate to ask for a better understanding. If you like to do it, don't hesitate to correct my gramma and spelling xD, because i need better english skills.

Hi,
Try this..
Activate breakpoints for http debugging..go inside component workbench trxn for any bsp component.. And select activate from the menu option debugging.. This will activate http breakpoints and it will stop in get/setter etc.
i believe this is required to do only once when you login to the system..
Hope this helps..
Cheers,
Sumit Mittal

Trigger - After Report Not working.

Hai,
Below is the coding written on the after report trigger for inserting values in a table but it not working,
even srw.message put and checked but not functioning at all...
what might be the problem...
Thanks in Advance...
function AfterReport return boolean is
begin
     srw.message(100,'Hai');
if (:total_credit) is not null then
     insert into opcl (fiscal_yr_cd,Period_no,Col1,Col2,Col3,Col4,Col5,Col6)
     Values (:P_Fiscal_yr,:P_Period,nvl(:total_credit,0), nvl(:total_cess_cf,0),
     nvl(:total_sec_cess_cf,0), nvl(:cf_tot_serv_tax1,0), nvl(:cf_tot_serv_tax2,0),
     nvl(:cf_tot_serv_tax3,0));
commit;
end if;
return (TRUE);
end;

How are you running the report? Not in the preview mode in builder I hope, because that won't fire the after report trigger.
"The After Report trigger fires after you exit the *Runtime Previewer*, or after *report output is sent to a specified destination*..."

Three Point Edit not working correctly :(

Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Hi 9 POINT CALIBRATION NOT WORKING IN VISION BUILDER

I try to do 9 point calibration by using run labview method in Vision builder .
here i tried teo labview files here Reference 1-1.vi working (it gives in mm) (here i am not assigning 9 points )
Reference 1-11.vi file i did invidual points to so that i can enter directly 9 point and real world ..
but its not working .
Is there anyway to 9 point calibraiton in vision builder .
if i have to use run labview step means .. please give me vi file to to enter 9 points (from set variable )
Attachments:
Reference_Points1-1.vi ‏12 KB
Reference_Points1-11.vi ‏23 KB

I'm using Flash Builder 4.7 for a pure flash project (ie, no mxml) & all my graphics objects are in a swc that was exported from an FLA.
I've made some progress with that issue. If I explicitly assign the scale9Grid dimensions in the code, it seems to work:
obj.scale9Grid = new Rectangle(x,y,w,h)
...but having to do that is a real productivity killer. Would be nice to use the 9-slice guide setting in the FLA

Why is my ThinkPad track point scroller not working in Firefox 4?

Today as advised by you I have installed Firefox 4 on my ThinkPad Z60m laptop. Earlier with Firefox and all other application worked fine but now its not working on Firefox 4 yet working fine on MS IE and other applications. Please let me know soonest or else I being an avid user of the IBM track point will discontinue using Firefox altogether.

For me the solution given here worked on my Thinkpad T42 WinXP:
http://aslezak.com/thinkpad-trackpoint-scrolling-in-firefox
Open this file in Notepad:
C:\Program Files\Synaptics\SynTP\tp4table.dat
Find this line:
; Pass 1 rules (These rules run last)
Add the following lines above that:
; Firefox
*,*,firefox.exe,*,*,*,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaDropShadowWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaUIWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,*,WheelVkey,0,9
Save the file and restart the machine.

Points system not working

Dear Forum Moderator / Concerned Persons,
The Points system is not working.
Kindly arrange to make it active.
Regards,
Amit Mittal.

Hi,
1. Thanks Detlev Beutner
   for solving and prompt action.
2. Thanks Raja and Rich
   for advising me to mail.
   (The reply was quick from sdn)
Regards,
amit m.

Tools related to anchor points are not working, can't add a point to paths or convert a point.

Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.

bella,
Presuming we are not just talking about more or less hidden Anchor Points as in View>Show/Hide Edges/Bounding Box, you may try to start on the following list (5) seems unlikely in this case).
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

AFTER INSERT OR UPDATE TRIGGER the insert not working

The update works but the insert is not working. I have two version that I have tried. I amd executing the inserts/update from Oracle Applications and the table row is either being inserted or updated correctly.
DROP TRIGGER APPS.CCC_HZ_ORG_CONTACTS_ARU;
CREATE OR REPLACE TRIGGER APPS.CCC_HZ_ORG_CONTACTS_ARU
/* --Created By: SKELLEHER
--Creation Date: 07/15/09
--Last Updated By:
--Last Update Date:
AFTER INSERT OR UPDATE OF department, job_title
ON apps.hz_org_contacts
FOR EACH ROW
WHEN (
NEW.department <> OLD.department OR
NEW.job_title <> OLD.job_title
DECLARE
v_ChangeType VARCHAR2(10);
BEGIN
/* Use 'I' for Insert, 'U'' for Update, and'D' for delete(not part of app at this time). */
IF INSERTING THEN
v_ChangeType := 'INSERT';
ELSIF UPDATING THEN
v_ChangeType := 'UPDATE';
ELSE
v_ChangeType := 'DELETE';
END IF;
INSERT INTO cust.ccc_tca_po_tf_event_tbl
VALUES (ccc_tca_po_tf_event_tbl_s.NEXTVAL
, 'hz_org_contacts'
, v_ChangeType
, 'org_contact_id'
, :NEW.org_contact_id
, 'PENDING'
, NULL
, 0
, 'N'
, 'Y'
, :NEW.LAST_UPDATED_BY
, :NEW.LAST_UPDATE_DATE
, -1
, SYSDATE
, 'DEPARTMENT_JOBTITLE_UPDATE'
,'LDAP'
END;
AND I TRIED ANOTHER VERSION:

I have simplified it so it's just checking for insert but it's not picking up. Is the syntax IF INSERTING correct?
CREATE OR REPLACE TRIGGER APPS.CCC_HZ_ORG_CONTACTS_ARU
AFTER INSERT OR UPDATE
ON ar.hz_org_contacts
FOR EACH ROW
DECLARE
BEGIN
IF INSERTING THEN
INSERT INTO cust.ccc_tca_po_tf_event_tbl
VALUES (ccc_tca_po_tf_event_tbl_s.NEXTVAL
, 'hz_org_contacts'
, 'UPDATE'
, 'org_contact_id'
, :NEW.org_contact_id
, 'PENDING'
, NULL
, 0
, 'N'
, 'Y'
, :NEW.LAST_UPDATED_BY
, :NEW.LAST_UPDATE_DATE
, -1
, SYSDATE
, 'DEPARTMENT_JOBTITLE_UPDATE'
,'LDAP'
END IF;
END;
/

Raise Trigger form failure not working

Hi everybody,
I'm working with form builder 10g. And in my form, I have a button for save.
The issue is that I have a validation in the pre-insert trigger of a block where I am validating a particular record and in my preinsert trigger on a given condition, I'm raising a Form_trigger_failure.
Even when the condition is encountered in my pre-insert the flow of the program in not stopping.
But when I'm clicking on the default save button on the toolbar.. the flow of the program is stopped.
Here is the code on my save button:
:system.message_level:=5;
commit_form;
:system.message_level:=0;
IF Form_Success THEN
message('saved succesfully');
else
RAISE form_trigger_failure;
END IF;
Edited by: Amlesh on May 14, 2010 4:42 PM

Hi,
I have same issue, have you got any solution,
I have in my pre-insert trigger
if NVL (:COUNT_HEADER, 0) <= 0 THEN
     Msg_Alert ('Enter Call Details !','I',FALSE);
     RAISE Form_Trigger_Failure;
else
     select nvl(max(HCH_CALL_ID),0)+1 into :HCH_CALL_ID
               from HLP_CALL_HEADER;
     Msg_Alert ('The generated Call ID:'||:HCH_CALL_ID,'I',FALSE);
               :HCH_ORGN := :Global.orgn;
               :HCH_CRT_ON := sysdate;
               :HCH_UPD_ON := sysdate;
               :HCH_CRT_BY := :Global.usr;
               :HCH_UPD_BY := :Global.usr;
end if;Even though the alert, 'Enter Call Details', is shown, the flow of the form is not getting stopped.
it seems Raise Form_trigger_Failure is not working
I have in key-comit trigger
commit_form;
IF FORM_SUCCESS THEN
     msg_alert('form success','I',FALSE);
     CLEAR_FORM(NO_VALIDATE);
     EXECUTE_TRIGGER('PRE-FORM');
END IF;and it shows form success
Any help will be appreciated
Thanks

Office 365 Developer site for Share point is not working.

hi,
i created office 365 developer site for share point, it is not working for share point, i am getting error when click on Share point from ADMIN.We will getting am Error:

Hi,
I understand that you stay in the Office 365 admin Center, when you click the SharePoint option, you get the error page.
I recommend to enter the URL as below in the Brower to check whether the account can access SharePoint admin Center.
https://sitename /_layouts/15/online/SiteCollections.aspx
Here is a similar thread for
your reference:
http://community.office365.com/en-us/f/148/t/192116.aspx
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Pointing stick not working (EliteBook 8440p)

Hi.
I just bought a used HP EliteBook 8440p. The laptop seems fine apart from one issue; the pointing stick is not working. The buttons for the pointing stick does work, so does the touchpad and its buttons.
If I open the device manager, I see an unknown device under "Other devices" (I'm not using an english version of Windows, so my translation might be off). If I check its properties, it says "PCI bus 68, device 6, function 2". Might this be the pointing stick? If so, where do I find the correct driver?
I have installed the Synaptics touchpad driver, but this didn't help. The OS is Windows 7 pro, 64bit.
Any help would be appreciated.
This question was solved.
View Solution.

Never mind. The problem was that the ribbon cable for the pointing stick, had been inserted into the socket on the motherboard slightly askew.

Trigger points is not working

Similar Messages

Maybe you are looking for