Trigger RFC calls
Hi experts,
We have a sync scenario RFC -> HTTP on PI 7.0 that must trigger RFC calls during integration. First trigger must happen when some error happens on that scenario. I´ve been reading about alerts but as far as I know it only send e-mails, but we want to call an RFC, is it possible? The second trigger must happen when this scenario succeds, and thus calling some RFC. I don´t want to use ccBPM in such scenario because sync/async bridge has a lot of runtime errors/bugs.
Thanks,
Gabriela
Hi Gabriela,
I don´t want to use ccBPM in such scenario because sync/async bridge has a lot of runtime errors/bugs.
BPM would be the standard here. It might be slow or tricky, but it works.
Alternatives:
You could route an alert mail to an mail sender adapter to call a RFC. The success RFC should then be called from the invoking ABAP program.
You can send RFCs via look up from mapping. This works only if the http receiver is sending a response. It is not easy to catch all error situations.
Regards,
Udo
Similar Messages
-
Trigger an RFC call to ECC from PI using BPM
HEllo Experts,
This is my first time in ccBPM and require your expertise in gaining some insights onto calling an RFC FM using ccBPM.
I am typically implementing the scenario as it is mentioned in this blog: /people/mitesh.parekh/blog/2008/12/01/receiving-aleaud-as-acknowledgment-in-ccbpm in order to generate acknowledgements from ECC.
I have created the IR and ID and I am successfully able to exceute the BPM till step2. Step 3 is the ABAP mapping part for which i have specified teh required properties and Operation mapping too.
My concern is that how do i proceed from Step 4 i,e how do i trigger this RFC call to ECC and receive it in BPM again?
Thanks in advance,
Elizabeth.I am developing a scenario which looks like this MDM ->PI ( BPM) -> ECC.
Now the Integration process that I am developing is with reference to blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/12249. [original link is broken] [original link is broken] [original link is broken]
I am posting MATMAS from MDM which is received in first step(receive step) of this BPM.
2nd step (Send step - BPM) will send this MATMAS05 Idoc to ECC and Pi will have a message id generated for this message.
3rd step of BPM (ABAP mapping) - which will read the actual PI Idoc number from system tables based on the message id from step 2.
4th step: Idoc number retrieved is to be sent in the requset message of RFC ZALEAUD4XI.
5th step: Response of ZALEAUD4XI RFC is to be received in PI and sent for further processing.
Do i need a mapping between the requset output of ABAP mapping and the input RFC requset message of step4?
Thanks,
Elizabeth -
Creating action in CRM sales transaction to trigger RFC in R/3?
Hello gurus
We wish to replicate our contracts from CRM to R/3 but since SAP is not supporting it, I heard that one option that we have is to enable actions in our CRM sales transactions, which when executed will trigger an RFC call to R/3 system and then create same transactioon there as well...
Could anyone please shed some light as to how this can be done?
Please advise.
Regards
JaiHello,
I should prefer using the ORDER_SAVE Badi, using a queued RFC to create the dat in the R/3 system.
Regards,
Fred -
RFC call from ECC to SCM -- Debug Steps required
Hello,
The steps being done for this issue is:-
1) In ECC system ,CN22 Transaction Code (Change Networks) --> Click on Schedule (at the Header) and click on SAVE
2) This seems to trigger an RFC call to SCM server (as per the trace log).
3) From SCM, it comes back to ECC server as User 'BATCHRFC'. This has been defined in SM59 correctly.
4) BATCHRFC in ECC system calls an RFC FM 'CIF_PJ_INBOUND' and changed the status of networks to DSEX (date set by External system)
We are trying to understand why is the RFC call being made? I can debug the FM in ECC when an external breakpoint is used.
However, I want to know where in ECC is the RFC call made (to SCM), and how? How can I control it as we do not want this to happen? How can I debug to understand how an RFC call is made?
Your views would be appreciated.
Regards,
SanjivHi,
What you do is, enter the Tcode, CN22, then in Command window activate debugger by entering /H
It takes u to debugger, from menu > utilities set a break point at Satetment Call Function, it will stop at all the Function modules in debugger, so you can look for the RFC FM in the program where it is called.
And also look for setting in debugger, may be u have some options for RFC FM.
Regards
Bala Krishna -
Error with Asynchronous RFC call to JDBC
Hi all,
We are working on a scenarion where in we have to make an asynchronous RFC call to JDBC.
We have configured RFC sender adapter following this weblog
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
We have created data types only for the database as RFC does not require any data types.
And also we have created message types,message interfaces accordingly.
In Message Mappping,we mapped the export parameters of RFC to the access fields of database message type.
Also we have created sender agreement,interface determinations etc.... accordingly
And for sending RFC request asynchronously we followed this weblog
/people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
Once done with all the above steps we could able to trigger the RFC call and caught with the following errors in SXMB_MONI and no errors are seen in communication monitoring
SOAP Error:
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>+
+- <!-- Request Message Mapping+
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_curr_exg_mm2_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" /> <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_curr_exg_mm2_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also trace shows the following error thogh the interface determinations are properly configured
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface BAPI_EXCHRATE_GETCURRENTRATES*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:rfc:functions</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
the above errors are shown as part of request mapping..
Can any one please let me know what other configurations do we need to do?
I did not map the RFC import parameters,do we need to do that
Any help in this regard is really appreciated
Rgds,
SanthoshHi,
I am really happy to hear that the problem with mapping is resolved.
Now as per your requirment It needs to be aynschornous RFC--> XI ---> JDBC call. In XI you should map the RFC Export parameters to the traget structure of JDBC.
then the question is to how to trigger the RFC Function Module in R/3 to XI.
Plesae follow below steps to trigger it from SAP R/3
1. Create a RFC in the R/3 system
2. Configure the SM59 and Sender Communication channle as given in the Michal's blog. Also test if it is succesful.
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
3. Import the RFC in XI
4. Do the mapping to the target strucutre
5. Configure the JDBC receiver adapter
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
6. You can trigger the RFC from R/3 sytem by using
Async Call - in ABAP program use below syntax to call RFC. Here the export parameters will be passed on to XI which further have mapped to JDBC.
CALL Function "RFC Name" IN BACKGROUND TASK destination <sm59 destination>
COMMIT WORK.
Sync Call
CALL Function "RFC Name" destination <sm59 destination>
Thanks
Swarup
Edited by: Swarup Sawant on Jan 27, 2008 9:14 AM -
Alerts for successful and unsuccessful RFC calls
Hi Experts,
I am creating Http to RFC scenario in which data is sent to RFC to create sales order.
I also need to create alerts for both successful and unsuccessful RFC calls.
How this can be achieved.
Thanks,
VishalHi,
If you just want alerts for only the failures, then you can configure the generic alert in the Runtime workbench at the adapter level.
But if you want alerts for succesful RFC calls also, then you can use ccBPM.
YOu ccBPM will have a Block step.
Inside the Block step you can have your send step synchronous.
In the exception branch of the Block step, you can have a Control step which will trigger an alert.
And in the normal branch, you can check for the successful message using the response message from the send step , and use another control step to trigger an email
Regards,
Ravi -
Executing Workflow through RFC Call
Hi,
I need to execute a worklow in one system through an RFC call from another system . Is this possible?
If yes, then what all parameteres do I need to do so and what all steps are involved.
Regards,
DivyanshuHi Divyanshu,
It is best not to start workflows directly but rather by using events. Usually a WF will have a triggering event defined, such as EMPLOYEET.POSITIONCHANGED. Look at the WF header for the trigger.
You can remotely raise this event using FM SAP_WAPI_CREATE_EVENT. Pass it the object type, key and event name and any other parameters. It even has some documentation.
Cheers
Mike -
Program making a RFC call to Function Module not working in background
Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1. Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2. Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3. Function Module Passes back the count values and aggregated Net_Value to the program
4. Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
DharmendraRFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.
-
Assigning value returned from RFC call to a global variable
If I have an RFC call to SAP how can I assign the value returned to a global variable on my data services job?
Hi,
For now, it seems u haven't specified the destination properly. the call function statement must be suffixed with the 'destination' addition to make sure that the function call is an RFC and the particular function be executed at the desired destination. -
Is there any way to limit the number of RFC calls from xMII to SAP R/3
Hi All!
I wanted to know whether the number of simultaneous RFC connections made from xMII to SAP R/3 system can be controlled in any way. Suppose we have a scenario wherein some million Sales Orders or Production Orders are to be updated in SAP R/3 from xMII in a short span of time. For all these updations to take place, multiple RFC calls will be established from xMII to SAP at the same time. This will increase the load on the SAP R/3 system and affect performance of the SAP R/3 system. Is there any check on xMII side to limit the number of RFC calls that can be made to SAP R/3 system?
Regards
AnupamAnupam,
If you are using 11.5 just keep in mind that the JCO connection points to a single application server (based upon the SAP Server alias connection settings), but the traffic itself to make a BAPI request is effectively the same as any client user traffic. There will obviously be limitations on performance and throughput, with network and server constraints added to the number and size of the R/3 requests, but there is no magic formula to plug-in because of all of these variables.
If you are using 12.0 (or plan to migrate when it goes GA) then taking advantage of the JRA (java resource adapter) and the associated application server pooling that it offers on the NetWeaver side of things will greatly help you in the throughput capacity.
If you have put some of your xMII application into either test or productive use and are running into issues then I would highly recommend entering the specifics into the customer / partner support portal so that they can help you through any associated problems.
Regards,
Jeremy Good -
Hallo,
My scenario is as follows: when sending a RFC to XI via the RFC adapter, I get a short dump with the following error: "the error occurred in an RFC call to another system (XI).The termination occurred in the function "RfcExtendedReceive" of the SAP
Basis System, specifically in line 392 of the module
"//bas/640_REL/src/krn/rfc/abrfcrcv.c#2".
The internal operation just processed is "FUNC".
The internal session was started at 20060125163632".
The RFC adapter has been configured as the Sender and all the parameters populated with the system details.
Has someone seen this eror before?
Please assist.
Thanks,
CatherineMaybe you're invoking RFC synchrounously from ABAP code and your receiving scenario is on Asynchrounous interfaces? What are you doing then in XI with data sent by the RFC?
Message was edited by: Alessandro Guarneri -
Flat File-to-RFC question, multiple RFC calls for one file.
Hi guys,
I'm quite new to XI / PI and I have a question regarding a File-to-RFC scenario we're trying in NW PI 7.1.
We have a flat file which has two lines with two fields each, let's take this as an example :
001,001
002,002
The files needs to be converted to XML and then transferred to the RFC program which will update a table with the values above.
In the ESR I've created 3 data types (z_row1,z_record1 and z_fileinput1), 1 message type (z_file2rfc_ob_mt), 1 message mapping (z_file2rfc_mm), 2 Service Interface (z_file2rfc_ob_si and z_file2rfc_ib_ztestpi) and 1 operation mapping (z_file2rfc_om).
In the Integration Builder (ID) I've created everything required (The sender and receiver communication channels, sender and receiver agreement, receiver determination and interface mapping).
We're also using content conversion to convert the flat file to XML, this does seem to work because I see all the lines/field in the message when it gets into PI. The problem is that the RFC can only accept two fields at a time and only the first line gets updated. I see that only the first line gets sent to the RFC.
How can I make the RFC call for each and every line ?
Thanks !!Create the RFC with table, which takes multiple lineitem as input and update the table in single call.
If you want response back then call RFC as synchrounous else in Asynchrounous mode.
By doing this in single call it will update the complete table.
Gaurav Jain
Reward Points if answer is helpful -
RFC call results in StORAGE_PARAM_WRONG_SET
I'm in trouble with a RFC call, the process is as following: SAP system A calls a report. This report selects FI documents via LDB SDF. After user selects one or more documents from the list I call a RFC to read the payroll posting results from system B. The call of the RFC takes place for each FI document separatly what means user selects e.g. 10 FI documents, so I have 10 RFC calls with one result list. After each RFC call I add the result table of the RFC to the output table within the report. Before calling the RFC I of course clear all relevant tables again and additionaly I also use the 'FREE' statement within the RFC to set free all the memory, so there is no data stored in internal tables. But when the user selects a great no. of FI documents to read the payroll postings sometimes the RFC cancels in system B telling me that the storage parameters were set wrong. Calling the RFC step by step by selecting the FI document in single mode from the list I don't receive this dump. Do you have an idea what to do to avoid the dump? One problem: I don't have access to system B to test there, I only can do testing in system A and therefore I have no possibility to debugg this.
This is the code of the RFC module:
FUNCTION y_rfc_read_payroll_postings.
*"*"Local interface:
*" IMPORTING
*" VALUE(I_AWKEY) TYPE AWKEY
*" VALUE(I_CHECKNO) TYPE XFELD
*" VALUE(I_TAX) TYPE XFELD
*" EXPORTING
*" VALUE(E_PPDHD) TYPE PPDHD
*" TABLES
*" T_PPDIT STRUCTURE PPDIT
*" T_PPOIX STRUCTURE PPOIX
*" T_PPDIX STRUCTURE PPDIX
*" T_PAYR STRUCTURE PAYR OPTIONAL
*" T_HRPAY STRUCTURE PC209 OPTIONAL
*" T_REGUTA STRUCTURE REGUTA OPTIONAL
*" T_VALUES STRUCTURE YSHR_RFC_PAYROLL_POSTING OPTIONAL
*" T_CSKA STRUCTURE CSKA
*" RETURN STRUCTURE BAPIRET2
* local data
TYPE-POOLS: pptgs.
TYPES: BEGIN OF type_helpval,
pernr TYPE p_pernr,
lgart TYPE lgart,
rel TYPE xfeld,
END OF type_helpval.
TYPES: BEGIN OF type_cluster,
pernr TYPE p_pernr,
seqno TYPE cdseq,
abrj TYPE pnppabrj,
abrp TYPE pnppabrp,
actual TYPE srtza,
betrg TYPE ppoix-betrg,
waers TYPE ppoix-waers,
END OF type_cluster.
DATA: BEGIN OF lt_ppoix_key OCCURS 0,
pernr LIKE ppoix-pernr,
seqno LIKE ppoix-seqno,
actsign LIKE ppoix-actsign,
runid LIKE ppoix-runid,
postnum LIKE ppoix-postnum,
END OF lt_ppoix_key.
FIELD-SYMBOLS: <payroll> TYPE yshr_rfc_payroll_posting.
DATA ht_ppoix TYPE TABLE OF ppoix.
DATA productive_runs LIKE hrpp_pernr_runtab OCCURS 0 WITH HEADER LINE.
DATA t_rgdir TYPE TABLE OF pc261.
DATA wa_rgdir TYPE pc261.
DATA t_helpval TYPE TABLE OF type_helpval.
DATA t_cluster TYPE TABLE OF type_cluster.
DATA wa_helpval TYPE type_helpval.
DATA wa_cluster TYPE type_cluster.
DATA h_molga TYPE molga.
DATA h_ltext TYPE t5utz-ltext.
DATA wa_t512w TYPE t512w.
DATA wa_return TYPE bapiret2.
DATA par1 TYPE syst-msgv1.
DATA par2 TYPE syst-msgv2.
DATA par3 TYPE syst-msgv3.
DATA wa_ppoix TYPE ppoix.
FIELD-SYMBOLS: <wa_ppdit> TYPE ppdit.
DATA wa_ppdix TYPE ppdix.
DATA result_tab_us TYPE payus_result.
DATA result_tab_in TYPE payin_result.
DATA t_bt TYPE hrpay99_bt.
DATA t_rt TYPE hrpay99_rt.
DATA wa_bt TYPE pc209.
DATA wa_rt TYPE pc207.
DATA h_time(6) TYPE c.
DATA t_inter TYPE TABLE OF pay99_international WITH HEADER LINE.
DATA t_tax TYPE hrpayus_tax.
DATA wa_tax TYPE pc22t.
DATA wa_payr TYPE payr.
DATA wa_reguta TYPE reguta.
DATA wa_payroll TYPE yshr_rfc_payroll_posting.
DATA t_ppopx TYPE TABLE OF ppopx.
DATA wa_ppopx TYPE ppopx.
DATA wa_t001 TYPE t001.
FREE: t_ppdit, t_ppoix, t_ppdix, t_payr, t_hrpay, t_reguta,
t_values, t_helpval, t_cluster, t_ppopx.
* read general information
SELECT SINGLE * FROM ppdhd INTO e_ppdhd WHERE
docnum EQ i_awkey.
CASE syst-subrc.
* everthing ok, continue
WHEN 0.
* get the company code and assign US flag
SELECT SINGLE * FROM t001 INTO wa_t001 WHERE
bukrs EQ e_ppdhd-bukrs.
* exit and set err. mess.
WHEN OTHERS.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
type = 'E'
cl = 'HR3PRNA'
number = '704'
* PAR1 = ' '
* PAR2 = ' '
* PAR3 = ' '
* PAR4 = ' '
* LOG_NO = ' '
* LOG_MSG_NO = ' '
* PARAMETER = ' '
* ROW = 0
* FIELD = ' '
IMPORTING
return = wa_return
wa_return-field = 'PPDHD'.
APPEND wa_return TO return.
EXIT.
ENDCASE.
* read table PPDIT
SELECT * FROM ppdit INTO TABLE t_ppdit
FOR ALL ENTRIES IN t_cska
WHERE docnum = i_awkey AND
hkont = t_cska-kstar.
CASE syst-subrc.
* everthing ok, continue
WHEN 0.
* exit and set err. mess.
WHEN OTHERS.
par1 = 'PPDIT'.
par2 = 'document'.
par3 = i_awkey.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
type = 'E'
cl = '5G'
number = '58'
par1 = par1
par2 = par2
par3 = par3
* PAR4 = ' '
* LOG_NO = ' '
* LOG_MSG_NO = ' '
* PARAMETER = ' '
* ROW = 0
* FIELD = ' '
IMPORTING
return = wa_return
wa_return-field = 'PPDIT'.
APPEND wa_return TO return.
EXIT.
ENDCASE.
* read table PPDIX
SELECT * FROM ppdix INTO TABLE t_ppdix
FOR ALL ENTRIES IN t_ppdit
WHERE evtyp EQ e_ppdhd-evtyp AND
runid EQ e_ppdhd-runid AND
docnum EQ e_ppdhd-docnum AND
doclin = t_ppdit-doclin.
CASE syst-subrc.
* everthing ok, continue
WHEN 0.
* exit and set err. mess.
WHEN OTHERS.
par1 = 'PPDIX'.
par2 = 'runid'.
par3 = e_ppdhd-runid.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
type = 'E'
cl = '5G'
number = '58'
par1 = par1
par2 = par2
par3 = par3
* PAR4 = ' '
* LOG_NO = ' '
* LOG_MSG_NO = ' '
* PARAMETER = ' '
* ROW = 0
* FIELD = ' '
IMPORTING
return = wa_return
wa_return-field = 'PPDIX'.
APPEND wa_return TO return.
EXIT.
ENDCASE.
* read detail values on accounting level
SELECT * FROM ppoix INTO TABLE t_ppoix
FOR ALL ENTRIES IN t_ppdix WHERE
runid EQ t_ppdix-runid AND
tslin EQ t_ppdix-linum.
* read reposted documents from ppopx
SELECT * FROM ppopx INTO TABLE t_ppopx
FOR ALL ENTRIES IN t_ppdix WHERE
runid EQ t_ppdix-runid AND
tslin EQ t_ppdix-linum.
IF syst-subrc EQ 0.
* append corresponding lines to T_ppoix
LOOP AT t_ppopx INTO wa_ppopx.
MOVE-CORRESPONDING wa_ppopx TO productive_runs.
CLEAR productive_runs-runid.
COLLECT productive_runs.
ENDLOOP.
* get run table
CALL FUNCTION 'HR_EVAL_PROD_A_RUN_GET_TABLE'
TABLES
result_table = productive_runs.
LOOP AT productive_runs.
IF productive_runs-runid IS INITIAL.
DELETE productive_runs.
ENDIF.
ENDLOOP.
* fill ppoix-keys for needed ppoix
LOOP AT productive_runs.
LOOP AT t_ppopx INTO wa_ppopx.
IF wa_ppopx-pernr EQ productive_runs-pernr AND
wa_ppopx-seqno EQ productive_runs-seqno.
* built key
CLEAR lt_ppoix_key.
MOVE-CORRESPONDING productive_runs TO lt_ppoix_key.
lt_ppoix_key-postnum = wa_ppopx-postnum.
lt_ppoix_key-actsign = 'A'.
COLLECT lt_ppoix_key.
ENDIF.
ENDLOOP.
ENDLOOP.
* any values to append?
READ TABLE lt_ppoix_key INDEX 1.
IF syst-subrc EQ 0.
SELECT * FROM ppoix INTO TABLE ht_ppoix
FOR ALL ENTRIES IN lt_ppoix_key
WHERE pernr = lt_ppoix_key-pernr
AND seqno = lt_ppoix_key-seqno
AND actsign = 'A'
AND runid = lt_ppoix_key-runid
AND postnum = lt_ppoix_key-postnum.
IF syst-subrc EQ 0.
LOOP AT t_ppopx INTO wa_ppopx.
LOOP AT ht_ppoix INTO wa_ppoix WHERE
pernr EQ wa_ppopx-pernr AND
seqno EQ wa_ppopx-seqno AND
postnum EQ wa_ppopx-postnum.
MOVE-CORRESPONDING wa_ppopx TO wa_ppoix.
IF wa_ppoix-actsign <> 'A'.
wa_ppoix-betrg = - wa_ppoix-betrg.
wa_ppoix-anzhl = - wa_ppoix-anzhl.
ENDIF.
APPEND wa_ppoix TO t_ppoix.
DELETE ht_ppoix.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
* check for any entries in table T_PPOIX
READ TABLE t_ppoix INTO wa_ppoix INDEX 1.
CASE syst-subrc.
* everthing ok, continue
WHEN 0.
* exit and set err. mess.
WHEN OTHERS.
par1 = 'PPOIX'.
par2 = 'runid'.
par3 = e_ppdhd-runid.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
type = 'E'
cl = '5G'
number = '58'
par1 = par1
par2 = par2
par3 = par3
* PAR4 = ' '
* LOG_NO = ' '
* LOG_MSG_NO = ' '
* PARAMETER = ' '
* ROW = 0
* FIELD = ' '
IMPORTING
return = wa_return
wa_return-field = 'PPOIX'.
APPEND wa_return TO return.
EXIT.
ENDCASE.
CHECK i_checkno EQ 'X' OR
i_tax EQ 'X'.
CLEAR t_values.
* read payroll results, determine values
LOOP AT t_ppdit ASSIGNING <wa_ppdit>.
LOOP AT t_ppdix INTO wa_ppdix WHERE
evtyp = e_ppdhd-evtyp AND
runid = e_ppdhd-runid AND
doclin = <wa_ppdit>-doclin.
LOOP AT t_ppoix INTO wa_ppoix WHERE
runid EQ e_ppdhd-runid AND
tslin EQ wa_ppdix-linum.
* append anywhere for checkno
IF i_checkno EQ 'X'.
wa_cluster-pernr = wa_ppoix-pernr.
wa_cluster-seqno = wa_ppoix-seqno.
wa_cluster-abrj = <wa_ppdit>-abper+0(4).
wa_cluster-abrp = <wa_ppdit>-abper+4(2).
wa_cluster-actual = wa_ppoix-actsign.
wa_cluster-betrg = wa_ppoix-betrg.
wa_cluster-waers = wa_ppoix-waers.
IF <wa_ppdit>-abper IS INITIAL.
* write BONDT into field ZUONR
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = wa_ppoix-pernr
TABLES
in_rgdir = t_rgdir.
READ TABLE t_rgdir INTO wa_rgdir WITH KEY
seqnr = wa_ppoix-seqno.
IF syst-subrc EQ 0.
<wa_ppdit>-zuonr+0(10) = wa_rgdir-bondt.
ENDIF.
ENDIF.
APPEND wa_cluster TO t_cluster.
ENDIF.
IF i_tax EQ 'X'.
* check if LGART is relevant
READ TABLE t_helpval INTO wa_helpval WITH KEY
pernr = wa_ppoix-pernr
lgart = wa_ppoix-lgart.
CASE syst-subrc.
WHEN 0.
* relevant or not
CASE wa_helpval-rel.
WHEN 'X'.
wa_cluster-pernr = wa_ppoix-pernr.
wa_cluster-seqno = wa_ppoix-seqno.
wa_cluster-abrj = <wa_ppdit>-abper+0(4).
wa_cluster-abrp = <wa_ppdit>-abper+4(2).
wa_cluster-actual = wa_ppoix-actsign.
wa_cluster-betrg = wa_ppoix-betrg.
wa_cluster-waers = wa_ppoix-waers.
IF <wa_ppdit>-abper IS INITIAL.
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = wa_ppoix-pernr
TABLES
in_rgdir = t_rgdir.
READ TABLE t_rgdir INTO wa_rgdir WITH KEY
seqnr = wa_ppoix-seqno.
IF syst-subrc EQ 0.
<wa_ppdit>-zuonr+0(10) = wa_rgdir-bondt.
ENDIF.
ENDIF.
APPEND wa_cluster TO t_cluster.
* save values
MOVE-CORRESPONDING wa_ppoix TO wa_payroll.
wa_payroll-betrg = ABS( wa_payroll-betrg ).
APPEND wa_payroll TO t_values.
WHEN ' '.
CONTINUE.
ENDCASE.
WHEN OTHERS.
* determine values
CALL FUNCTION 'HR_COUNTRYGROUPING_GET'
EXPORTING
pernr = wa_ppoix-pernr
* TCLAS = 'A'
begda = e_ppdhd-bldat
endda = e_ppdhd-bldat
* WERKS =
IMPORTING
molga = h_molga
EXCEPTIONS
not_found = 1
OTHERS = 2
IF sy-subrc NE 0.
WRITE wa_ppoix-pernr TO par1.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
type = 'E'
cl = 'HRPAYBR94'
number = '278'
par1 = par1
IMPORTING
return = wa_return.
wa_return-field = wa_ppoix-pernr.
APPEND wa_return TO return.
CONTINUE.
ENDIF.
SELECT * FROM t512w INTO wa_t512w
WHERE molga = h_molga
AND lgart = wa_ppoix-lgart
AND endda GE e_ppdhd-bldat
AND begda LE e_ppdhd-bldat.
EXIT.
ENDSELECT.
IF syst-subrc EQ 0.
IF wa_t512w-vklas+77(1) = '2'.
wa_helpval-pernr = wa_ppoix-pernr.
wa_helpval-lgart = wa_ppoix-lgart.
wa_helpval-rel = 'X'.
APPEND wa_helpval TO t_helpval.
wa_cluster-pernr = wa_ppoix-pernr.
wa_cluster-seqno = wa_ppoix-seqno.
wa_cluster-abrj = <wa_ppdit>-abper+0(4).
wa_cluster-abrp = <wa_ppdit>-abper+4(2).
wa_cluster-actual = wa_ppoix-actsign.
wa_cluster-betrg = wa_ppoix-betrg.
wa_cluster-waers = wa_ppoix-waers.
IF <wa_ppdit>-abper IS INITIAL.
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = wa_ppoix-pernr
TABLES
in_rgdir = t_rgdir.
READ TABLE t_rgdir INTO wa_rgdir WITH KEY
seqnr = wa_ppoix-seqno.
IF syst-subrc EQ 0.
<wa_ppdit>-zuonr+0(10) = wa_rgdir-bondt.
ENDIF.
ENDIF.
APPEND wa_cluster TO t_cluster.
MOVE-CORRESPONDING wa_ppoix TO wa_payroll.
wa_payroll-betrg = ABS( wa_payroll-betrg ).
APPEND wa_payroll TO t_values.
ELSE.
wa_helpval-pernr = wa_ppoix-pernr.
wa_helpval-lgart = wa_ppoix-lgart.
wa_helpval-rel = ''.
APPEND wa_helpval TO t_helpval.
ENDIF.
ENDIF.
ENDCASE.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDLOOP.
SORT t_cluster.
DELETE ADJACENT DUPLICATES FROM t_cluster.
LOOP AT t_cluster INTO wa_cluster.
CLEAR: result_tab_us, result_tab_in.
CASE wa_t001-land1.
WHEN 'US'.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
* CLUSTERID = 'RU'
employeenumber = wa_cluster-pernr
sequencenumber = wa_cluster-seqno
* READ_ONLY_BUFFER = ' '
* READ_ONLY_INTERNATIONAL = ' '
* ARC_GROUP = ' '
check_read_authority = ''
filter_cumulations = ''
* CLIENT =
* IMPORTING
* VERSION_NUMBER_PAYVN =
* VERSION_NUMBER_PCL2 =
CHANGING
payroll_result = result_tab_us
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10
WHEN OTHERS.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
* CLUSTERID = 'RU'
employeenumber = wa_cluster-pernr
sequencenumber = wa_cluster-seqno
* READ_ONLY_BUFFER = ' '
* READ_ONLY_INTERNATIONAL = ' '
* ARC_GROUP = ' '
check_read_authority = ''
filter_cumulations = ''
* CLIENT =
* IMPORTING
* VERSION_NUMBER_PAYVN =
* VERSION_NUMBER_PCL2 =
CHANGING
payroll_result = result_tab_in
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10
ENDCASE.
IF sy-subrc NE 0.
CLEAR wa_return.
wa_return-field = wa_ppoix-pernr.
CASE syst-subrc.
WHEN '1'.
wa_return-message = 'ILLEGAL_ISOCODE_OR_CLUSTERID'.
WHEN '2'.
wa_return-message = 'ERROR_GENERATING_IMPORT'.
WHEN '3'.
wa_return-message = 'IMPORT_MISMATCH_ERROR'.
WHEN '4'.
wa_return-message = 'SUBPOOL_DIR_FULL'.
WHEN '5'.
wa_return-message = 'NO_READ_AUTHORITY'.
WHEN '6'.
wa_return-message = 'NO_RECORD_FOUND'.
WHEN '7'.
wa_return-message = 'VERSIONS_DO_NOT_MATCH'.
WHEN '8'.
wa_return-message = 'ERROR_READING_ARCHIVE'.
WHEN '9'.
wa_return-message = 'ERROR_READING_RELID'.
WHEN OTHERS.
wa_return-message = 'OTHERS'.
ENDCASE.
APPEND wa_return TO return.
CONTINUE.
ELSE.
CASE wa_t001-land1.
WHEN 'US'.
t_inter = result_tab_us-inter.
WHEN OTHERS.
t_inter = result_tab_in-inter.
ENDCASE.
APPEND t_inter.
t_tax = result_tab_us-nat-tax.
LOOP AT t_inter.
t_bt = t_inter-bt.
t_rt = t_inter-rt.
ENDLOOP.
LOOP AT t_values ASSIGNING <payroll> WHERE
pernr EQ wa_cluster-pernr.
CLEAR wa_rt.
LOOP AT t_rt INTO wa_rt WHERE
lgart EQ <payroll>-lgart.
wa_rt-betrg = ABS( wa_rt-betrg ).
IF wa_rt-betrg EQ <payroll>-betrg AND NOT
wa_rt-cntr1 IS INITIAL.
IF wa_t001-land1 EQ 'US'.
LOOP AT t_tax INTO wa_tax WHERE
cntr1 EQ wa_rt-cntr1.
EXIT.
ENDLOOP.
IF syst-subrc EQ 0.
<payroll>-cntr1 = wa_tax-cntr1.
<payroll>-taxau = wa_tax-taxau.
* determine long text
SELECT SINGLE ltext FROM t5utz INTO h_ltext
WHERE taxau = wa_tax-taxau.
IF syst-subrc EQ 0.
<payroll>-ltext = h_ltext.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
* check table BT abd determine check no.
IF i_checkno EQ 'X'.
LOOP AT t_bt INTO wa_bt.
APPEND wa_bt TO t_hrpay.
CASE wa_bt-zlsch.
* check
WHEN 'C'.
SELECT * FROM payr INTO wa_payr WHERE
rzawe = 'C' AND
laufd = wa_bt-dtadt AND
pernr = wa_cluster-pernr AND
seqnr = wa_cluster-seqno AND
btznr = wa_bt-btznr.
EXIT.
ENDSELECT.
IF syst-subrc EQ 0.
* store period in a field to find correlation later
wa_payr-znme4+0(4) = wa_cluster-abrj.
wa_payr-znme4+4(2) = wa_cluster-abrp.
ELSE.
CLEAR wa_payr.
wa_payr-pernr = wa_cluster-pernr.
wa_payr-rwbtr = wa_cluster-betrg.
wa_payr-waers = wa_cluster-waers.
APPEND wa_payr TO t_payr.
ENDIF.
APPEND wa_payr TO t_payr.
* bank transfer
WHEN OTHERS.
h_time = wa_bt-dtati+0(5).
h_time+5(1) = 'P'.
SELECT * FROM reguta INTO wa_reguta WHERE
laufd = wa_bt-dtadt AND
laufi = h_time.
EXIT.
ENDSELECT.
IF syst-subrc EQ 0.
APPEND wa_reguta TO t_reguta.
ENDIF.
ENDCASE.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
ENDFUNCTION.Hi Sudhir,
These settings need to be done by basis people. Anyhow, you can go to the tcode RZ11 and put in these parameters mentioned in the error message. There will be documentation available for these parameters. Try to see if the defaults are not met for any of these parameters. If you find something strange, report it to the basis. The documentations in this are very helpful. Hope this helps.
Thanks and Regards
Subray Hegde -
RFC-Call from a xslt/javamapping error
Hi.
We implemented an Szenario IDOC to Mail(attachement).
Our incomming IDOC is a standard-IDOC from SAP.
ISU_INTERVAL_USAGE_INFORMATION.ISU_VDEW_MSCONS
our Target is an EDIFACT-File attached to a mail.
We did this succesfully before in a similar Szenario with UTILMD-IDOCs to a CSV-attachement of a mail.
Because there is no Mailinformation in these IDOCs, we do a RFC-Call to a backendsystem (SAP-ISU) wich delivers the information selected by the IDOC-number.
This is the XSLT for this call:
<xsl:variable name="maildata" select="emailadress:new($param1, $param2, $inputparam)" />
<xsl:variable name="from" select="emailadress:getSenderEmailAdress($maildata)" />
<xsl:variable name="to" select="emailadress:getReceiverEmailAdress($maildata)" />
<xsl:variable name="cc" select="emailadress:getCcReceiverEmailAdress($maildata)" />
<xsl:variable name="bcc" select="emailadress:getBccReceiverEmailAdress($maildata)" />
when I test the Mapping in the Integration Builder, the RFC-call gives us the following error message:
08:42:39 Teststart
Creating XSLT mapping iDoc_MSCONS_to_Mail
URIResolver called with href = iDoc_to_MSCONS.xsl and base = iDoc_MSCONS_to_Mail.xsl
Source resolved. System id = iDoc_to_MSCONS.xsl
Call XSLT processor with stylsheet iDoc_MSCONS_to_Mail.xsl.
Method fatalError called, terminate transformation
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) ... 18 more Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more -
com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more
TransfromerException during XSLT processing:
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) ... 18 more Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more -
com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more
08:42:39 TestendeHi Harald,
I guess this is the IDEX package delivered by SAP?
In the latest version of the package SAP also deliveres a package for eclipse to test the mappings.
Also make sure that your data in IS-U (serviceanbieter) is maintained correct!
Regards Mario -
It is possible to get a response of a asynchronous RFC call thru wait loop
Hi Experts,
The requirement is that i queue up all the requests from a web services ( One queue per plant for example) which i set in the HTTP sender URL ( i mean the queue name ). and i am posting the records thru a RFC call.
1. Let the RFC call be synchronous and in case the R/3 system is done.. Will the XI queue keep the Call and keep on retrying it till the R/3 system is up.
2. Otherwise if the RFC call be asynchronous, is it possible to introduce a wait loop in BPM to listen to the RFC till i get some response ( i think this is not possible).
Need your suggestion on the same...
The requirement demands that no single request from the web service should be lost.. in case of failure of R/3 they should be queued up and re tried.. Forget about the error because of exception in RFC this will be taken care manually..
Thanks for your response in advance.Hi Rajesh,
you can queue and restart only asynchronous messages. I think you can build a Business Process, where you repeat sending a message til you have success or maximum number of tries is reached. But no good idea, coz you will get timeout at HTTP sender. Aynchronous messages dont have a response.
May be, XI can solve your task in the standard: In transaction SMQR you can just configure what you describe. All asynchronous messages will be queued and restartet in case of receiver not reachable. You can configure no of retries and intervall between.
Regards,
Udo
Maybe you are looking for
-
Links in menu not going anywhere
Hello All On this page http://www.pureoceansalt.com/index6.html the menu links do not go anywhere - I know the pages are live. And I have moved around the js files to see if that is the problem. I assuming it still is but cant seem to get it fixed an
-
Connecting two EA6500 routers via wireless bridge
Hi, I want to know how can we bridge two EA6500 routers via wireless. I do not want to use the lan cable. Please help. Thanks, anandp
-
Ipod to Airport connection works only once
I have some kind of airport card in my mac pro. I think it's airport express. the machine was configured 4/2007. I was thrilled when an apple store employee told me I could communicate with my new ipod touch and the airport on my mac pro. I did syste
-
Image capture will not recognise my iPhone?
Image Capture on my iMac with Snow Leopard, does not recognise my iPhone when I attach it. I have tried the same phone with a MacBook Pro without a problem. The Image Capture software is the same version on both computers. Can anyone help? Chris
-
Cisco prime infrastructure 1.3
Hi Experts, i am currently try to explore cisco prime Infra 1.3 and facing some problem. 1 : i have set the admin password at startup config but this password is not working(i am pretty sure that i have enter the same password) 2: Can i change the pr