Trigger Second Interface for the same Creation event

Hello all,
I have to send my every created equipment to two different systems.
I created Custom function Modules which create individual Idocs.
I called these function modules in Methods and we created two custom Tasks to trigger workflow creation event.
Problem is system is not accepting the second event triggering. It is showing
'Feed back After error'
'Deactivating' --- In Event Trace, and it is deactivating the second link in SWETYPV and first event is working fine.
First Event was developed long back and we did for second event now.
Did i miss something for my new Tasks?
If i change the setting of Event delivery to '(always) Using Queue ' for second event in SWETYPV,
It is not showing error but event trace is showing that second event is in Queue?
How to process this Event?
Thanks,
Krishna.

Hello,
It was Checked already..
still not working..
Event Trace error was giving this error also..
'Event EQUI CREATED for task TS90100007 not defined as start/end event'.
Regards,
Krishna.
Edited by: Krishna on Sep 11, 2009 3:32 PM

Similar Messages

  • How to use multiple Interfaces for the same BS?

    Hi @ ,
    Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
    I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
    Any help will be highly rewarded
    Regards

    Hi-
    Yes it is possible you can use multimapping for mapping the interfaces.
    To know more about multimapping see
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    Some more helpful links
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • How to restrict the second PO for the same PR

    Hi All,
    My requirement is if the two users are simultaneously creating PO using ME57 T.code,
    For the second user it is giving error message as u201CPR is processing by first useru201D
    Even it is raising error message; it is allowing creating PO second user also.
    I.e. for one PR it is creating 2 Pou2019s with one duplicate PO
    Here my concern is even it error raised as u201CIt is processing by first useru201D why it is allowing to create PO for the second user.
    CALL FUNCTION 'ENQUEUE_EMEBANE'
    This function module is giving sy-subrc = 2.
    What may be the cause to avoid the error message?
    Is there any config related thing to avoid this type of error?
    How can I restrict to create the PO for second user?
    Please help me in this.
    Thanks in Advance
    Rambabu.A

    In general you can restrict that a requisition is converted multiple times to a PO  by setting some messages to error.
    in trans SPRO
    MM...Purchasing....Enviromental data....define attributes for system messages.
    Add as ERROR message
    06076 "Materials of requisition & item & alr. ordered in full"
    But this usually will not solve the problem of parrallel processing.

  • How do I set up multiple Creative Cloud accounts for the same login?

    I have a number of Macs of various flavors.  I want to install Creative Cloud apps on four of these units.
    I have a subscription currently which I am using for my MBP 17, and a 27" iMac.
    I want to add an account for my MB Air and Mac Pro, and I'm willing to double my subscription fees to do it.  (I use different apps on each of the computers, though I like the idea of having the ability to use them all on each.) How do I accomplish this addtional subscription without having to add a new Adobe account?
    Second Question:
    I have the one-year special on my current subscription due to licensed PS 5.5. ($29.95/mo).  Would I be eligible on my second subscription for the same deal due to the license on the PS 5.5, or would I qualify due to being a Acrobat Pro 8 owner... or Licensed owner of previous versions of PS?  OR.... would I immediately be paying $49.95/mo for the second account?
    Either way, I'm in. Just want to do it all under one account if at all possible.
    Thanks in advance for resolution.  Cheers.

    Currently all subscriptions (with the exception of Team Ready) require a separate Adobe ID for each Creative Cloud Membership. Its not possible to have two memberships under the same Adobe ID.
    Adobe has a Team Ready offering for customers interested in a volume license for Creative Cloud. This is a TLP volume license to Master Collection CS6 and includes licensing for Lightroom and Muse. Customers with this will transition to Creative Cloud Team once available later in 2012. This product uses only a single serial # and Adobe ID. It's not the same as Creative Cloud Membership like what is currently available, but rather a means to get customers setup with something now to transition to the volume license Creative Cloud Team offering once available. If this sounds like something you would be interested in please contact a local Adobe Reseller for more info.
    This link has more info:
    http://www.adobe.com/products/creativesuite/companies.html
    This link can help someone find a reseller in NA
    http://partners.adobe.com/resellerfinder/na/reseller.jsp?nav=al
    I just read over the terms of the introductory offer and it is a 1 per customer offer, so it would be 49.95/mo for a second account.
    https://creativecloud-specialoffer.adobe.com/special-offer/?loc=en_US
    Hope that helps,
    -Dave

  • Duplicate AVDoc for the same PDDoc

    Is it possible to duplicate an AVDoc and show it in an external Window? According to API Reference, Starting with Acrobat 7.0, it is possible to have multiple windows open on the same document. But I found no API that can do that. If I use AVDocOpenFromXXX() to create a new ADDoc for an opened PDDoc, I get always the same AVDoc returned.
    Alternatively, I can simulate a MenuItem NewWindow button click to create a second AVPageView for the same PDDoc and put it into an external window. However, in this case, Abode Acrobat treats it like the one created within the application. The external window is listed as MenuItem under Menu Window. Also, I get problem, if I click Revert MenuItem.
    Does Adobe PDF library provide a solution on this issue? Can I you IAC to cope with this problem?
    Im developing a Plugin with SDK 8 for Acrobat 8.
    Thanks.

    Hi Leonard,
    External Window is a MS Window outside the Acrobat application window. Acrobat standard plugins: Pan and Zoom Window and Loupe Tool are able to open such kind of window based on the origin PDDoc.
    The example External Window given by Adobe opens a new PDF (that was not opened) in an external window. If a PDF is opened, you cannot show it in another window again, for AVDocOpenFromXXX() returns always the same view.
    With the workaround: MenuItem New Window, I can get several views of the same PDDoc and thus show a PDF in different windows including in an external MS window. But Acrobat and external windows interfere with each other: Acrobat lists all opened external windows in system menu; if you press revert button, the external windows will be closed.
    I want to open several external windows based on the same PDDoc. They have the style like Pan and Zoom Window.
    Regards

  • How does iCal, or Calendar, order the display of multiple events for the same time?

    I can't for the life of me figure out how iCal orders the display of multiple items at the same time.  Does anyone have a clue?  It's not alphabetical.  It's not according the the order of the calendars in the left pane.  Is it just random?  Any help would be greatly appreciated.

    In the focus lost eventhandling start a thread which does
    the actual handling.
    the new thread waits for a little time (0.1 seconds)
    the click event of the button checks for a thread like the one above and tells it not to execute
    This way you execute the for the lost focus event only if
    the ok button isn't clicked in the same process ... not
    realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

  • When I enter an event in iCal, soon thereafter multiple other "New Event" notices (one to four) appear for the same day. If I delete these unwanted "New Event" notices, they later reappear -- sometimes multiplying like rabbits. Any suggestions?

    When I enter an event in iCal, soon thereafter multiple other "New Event" notices (one to four) appear for the same day. If I delete these unwanted "New Event" notices, they later reappear -- sometimes multiplying like rabbits. Any suggestions?

    Well, using iMovie to rearrange clips in a mini DV video edited by another program is extremely time consuming. I found a workaround. It still takes time, but it's much faster than rearranging the clips using iMovie.
    The workaround is as follows. Bring up Finder and go to the directory where your event's clips are stored (typically ~/Movies/iMovie Events/<name of event>). It helps to setup Finder to be in Cover Flow mode, so you can see the beginning of each clip. Then, sort the files in ascending order by the 'Date Modified' field. This makes Finder sort the files in the same order that they were imported from the mini DV tape. Clips with timecodes have the naming convention "clip-<year>-<month>-<day> hour;minute;second.dv". Clips without timecodes use another naming convention. With the files sorted by "Date Modified" in Finder, rename clips as needed so that the date/time in their file names are in ascending order. Note: when you rename a file, you need to restart iMovie. I suggest not running iMovie while renaming files.
    I believe the file date/timestamp is only accurate to the second. Occasionally, there may be a couple of clips that have the same date/timestamp. This may cause the ordering to not be correct. The best way to find these is through iMovie. To modify a file's date/time, right click on the clip in the event in iMovie, and then select "Adjust Clip Date and Time...".
    So, this workaround is a lot easier and faster than trying to rearrange things from scratch in iMovie. But it's still time consuming. Creating a project out of an already edited video should take less than 5 minutes (not counting import time), but that's not the case.
    I submitted an enhancement request to Apple asking if they can add an option to sort an event's clips in the order that they were imported by iMovie. Those who have the same issue as me, I suggest you submit an enhancement request as well.
    Anyone have any other suggestions?
    Thanks.

  • Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

    Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

    Hi Benjamins,
    I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
    Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
    Best,
    Sara

  • Stetting up FTP and SFTP adapters for the same interface

    Experts-
    I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
    Please send me any suggestions which would resolve my problem

    Hi Hari,
    As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
    If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use  SFTP for the secure transfer.
    Best Regards
    Srinivas

  • Events cannot have multiple exceptions for the same date

    I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
    I didn't find the answer on these forums but did find it on this thread on Google:
    http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
    Here's the important excerpt:
    "I had a client, who just had this same issue, nothing to do with Google cals.
    It was apparently, in my best guess, a corruption of the subscribed cal.
    *I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

    I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
    I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
    My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

  • Duplicate reminder emails for the same event

    Some of my users are experiencing duplicate reminder emails for the same event. These duplicates have the same bodies, different message-id headers and posted at exactly the same time.
    Has anybody seen this sort of behavior and know a fix.

    We had the same problem. At us I noticed the start/stop from the server went wrong. There were double processes running from the server. You should have 1 admin process, 1 notify process, 1 enpd process and (same as your cpu count) httpd processes.
    When the other ones are more then 1, restart the system.
    This receiving double e-mail reminder problem, you will only find at people who have AND event notifications on AND event & task reminders on! People who don't have BOTH activated, don't receive double reminders.
    Also watchout that your test calendar system can't send e-mail notifications to your production users. But this you can see by reading the headers from the e-mail .. the system where it comes from is then different.
    Hope this helps.
    Greetz,
    Miranda

  • TS4611 I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also after 3 meters away it keeps searching for network! It is the second try and the same issue. Will Apple ever come up with a solution?

    I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also, after 3 meters away from the rooter it keeps searching for network! It is the second try and the same issues. Will Apple ever come up with a solution? There is a program pack for the connection issue but I cannot believe that this computer wifi keeps connected only while nearby the rooter!

    Applied this update?
    http://support.apple.com/kb/TS4611?viewlocale=en_US&locale=en_US
    If the update is installed aready, you may have to wait until OS X 10.8.5
    update if and when it is relased.
    Best.

  • HT3702 I have two charges to my credit card for the same dollar amount at two different times. First on 2/27/14 & second on 3/25/14 for $4.34. today's is pending payment and last months has been removed form my account. I have not purchased anything.

    I have two charges to my credit card for the same dollar amount at two different times. First on 2/27/14 & second on 3/25/14 for $4.34. today's is pending payment and last months has been removed from my account. I have not purchased anything.

    If they are regular payments for the same amount then it sounds like you have an auto-renewing subscription - there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098

  • HT204053 My new HK iPhone will not download apps purchased in U.S. and says I need an HK Apple ID.  This creates a second Apple ID and I am concerned that I will have to pay twice for the same app.

    My new HK iPhone will not download apps purchased in U.S. and says I need an HK Apple ID.  This creates a second Apple ID and I am concerned that I will have to pay twice for the same app.

    Apps previously purchased will continue to operate wherever you are.    However; you'll not be able to update them other than by using the original purchase details.   What this means is that you can only 'purchase' from a country's store if you have a valid credit card and residence of and in that country.

  • I need to start and stop logging based on a digital input event(or analog if necessary), log data for several seconds prior to the event, and have the data file close at the end of event and increment the filename for the next logging event.

    I don't know if this can be done with VI Logger or need to use Labview V7.1.

    After browsing through the VI Logger User Manual, it looks like the triggering that you are hoping to accomplish is possible. However, incrementing the filename for the next logging event is not going to be possible. VI Logger does exactly what its name tells - logs data. I don't think the automation that you are hoping to accomplish is possible.
    For help with setting up your application, if you do choose to stay with VI Logger, make sure to chek out the Getting Started with VI Logger Manual.
    Best of luck.
    Jared A

Maybe you are looking for

  • Problems performing offset null and shunt calibration in NI PXI-4220

    I am using a 350 ohm strain gage for the measurements, i have already create a task in MAX, when i want to perform offset null in the task, the program shows a waiting bar and the leds in the 4220 board start to tilting, but when the waiting bar stop

  • Need help.. and quick (simple)

    Hi. i am new to this and the whole java thing.. i have this lab for school, but i am stuck on this one part.. so far i have.. import javax.swing.JOptionPane; public class TestAgeApp {      public static void main(String[] args) { String name; name =

  • How to install hp support assistant after changing hard drive on my HP Pavilion TouchSmart

    Hi All, I have recently upgraded my hard drive and install OS windows 8.1. All is well everything is working fine. But, to get latest drivers from HP, I want to install :hp support assistant " application. I try to download and install, it is startin

  • Catalog functionality from ME51N screen(PR)

    Hi  , Standard SAP provides catalog icon using which we can goto vendor catalog and choose items to be procured. But SAP restriction is that only one catalog vendor can be accessed. Is there a way by which we can overcome this limitation. Thanks

  • Can't Remove Trial Version Coldfusion

    when trying to remove Coldfusion trial version from the control panel "remove programs" I get and error that says javaincprition error this program will shut down. it won't allow me to remove the coldfusion.