Trigger XDO1 (BO-KNA1) Workflow?

i have a requirement on Work flow XD01?how can i to trigger Workflow XD01? for this KNA1 BO is there . but Create event is not there? i created Event. in Basic Data->Start events. i gave the Created event. but the Workflow is not started? how can i trigger XD01 WF ?

Hi,
GO to SWEC, click on new entries.
Enter the change document object as DEBI.
BO as KNA1.
Event as CREATED.
Select the radio button On Select.
This should do the job.
Hope it helps.
Regards,
Raj

Similar Messages

Not able to trigger the Leave Request Workflow from EP

Hi,
There is a problem that I am getting as follows and I need an urgent help :
I am using the Leave Request Workflow WS20000081 in R/3 4.7. The problem that I am getting when I login as "A" who is a boss of "B" and got the mail in inbox in corresponding workflow for Approve or Reject the Leave Request. Now when I "Approve" the Leave Request from R/3 Inbox, then the workflow move for the processing, but if the same Leave Request is to be "Approve" from EP having either the SAP Transaction iView or IAC iView, it doesn't process the Workflow further neither for Approval nor for Rejection. And the workitem remains as such in EP Inbox.
Can someone tell me what to do so that it will trigger from EP too.
Regards
Deep

Hi,
If u have no authorization, even the job log finishes the request won't be deleted.
Once chk the log step by step.....to have some more inf reg authoriations...
Or once goto RSRQ and give the request no there and chk the status of the request whether it is deleted or not?
Atlast try to log-off and refresh the session completely and try.
rgds,

Trigger BPM from R3 workflow

Hello @all,
i have the following idea of scenario: After creating a quality notification (QN) in R3 a BPM on XI-server should start, getting the BO of the QN.
My question is how can the workflow in R3 start the BP in XI and also how to send the BO from workflow in R3 to the BPM in XI?
In my opinion there are 2 main possibilities to communicate:
1. IDoc
2. SOAP
I would be happy about a step by step solution on both or even more solutions (maybe with comments or advantages and disadvantages).
Thanks in advance
Chris

Hi Henrique,
thx for your quick answer, some questions concerning your answer:
1. the R/3 is version 4.7 on the WebAS 620; if it is ECC i don't know exactly, is it necessary?
2. are there any advantages if you compare the technologies each other (RFC/IDoc vs Proxy/WS)? What would you recommend, cause for the BO quality notification i have less BAPIs and RFC possibilities.
3. How should I start with Proxies and Webservices? Do you have a a step by step solution for a similar scenario?!?
4. Just that I understand it right my Webservice should be the IP that receives the BO in XI. And the generated proxy plays the role of the Webservice Client triggering the IP?
5. I don't get the point how to make use of the ABAP proxy if my initiator is a step of the workflow in R3?
Greetings
Chris

How to trigger a second workflow from a workflow?

Hi All,
          I want your guidance in deciding the process flow of a workflow to be developed.
          We have a scenario in our project where we have to develop a workflow for vendor creation/change
          done through a portal.Now we have designed to do through this 2 workflows.
          First workflow is triggered when the create/change is done in the portal and the entry is made in a
          z table.This is the trigger point of first workflow.
          First workflow will identify all approvals and store them in another z table with all the approval levels needed and the approval groups stored in the z table itself.
          Second flow will trigger on the entry made in this z table.It will read all approvals and send the mails to tha approvers in the respective aproval groups.
Now can you please verify this.Is it possible to trigger a second workflow from a workflow?
If yes then can you please explain the methodology to do the same?
Also if any other approach can be taken,please suggest the same.
Thanks a lot,
Saket.

First Develop a Z Business OBject (let ZVENDOR) to update the Z table when ever a Vendor is created or Changed.
Now For the first workflow do like this
From the WD application when the user clicks on the SAVE button then call the Function module SAP_WAPI_START_WORKFLOW .
Develop a method in the ZVENDOR to update the Z table.Make the method as background.
Use the method that you have created in the above point in the first workflow but prior to this make sure that you have passed all the required information to the workflow.
Once the table is updated.
For Second Workflow
Create a Change document object for the Ztable.
And trigger the workflow when ever any entry is made or changed in the z table

Trigger a workflow from module pool screen at save button

Hi,
I am new to workflow.Please help me.My requirement is trigger a custom workflow from module pool screen at save button.
Scenario is: Create a Z screen for material creation and after pressing save button workflow should trigger to approver and approver emailid should be fetch from Z table and have to provide a link in work flow for Z t-code which displays a report of material pending for approval..
Please suggest me process how i can acheive this..
Thanks

Hi,
If you're using standard bapi's to save the material, you can then use either the standard events which are already triggered or you coul add a change document for material changes or creation.
Then this event can be the trigger of your custom workflow.
Kind regards, Rob Dielemans

HELP NEEDED: Use a new record for a customized table as a workflow trigger

Hi SAP Workflow Gurus,
Good day!
One of our requirements is to have the creation of a new record in a custom database table trigger a workflow. I read and followed the steps as indicated in this link
http://www.****************/Tutorials/Workflow/Table/events.htm
As a summary, here is what I did:
1. Created a subroutine for the custom table ZPA2003 for the create event
2. Defined this event as a trigger for the custom workflow WS90000019
3. Maintained and activated the event linkage via SWETYPV
Basically I tried following the instructions indicated on the link
Note that the entries for the custom table are created via a function module.
Now during testing of the workflow, the system was able to complete the notification message. However, when I triggered the event via creation of the entry in the custom db table nothing happened
1. Is there a way to debug/find out whether the link between the subroutine in the table and event itself are connected?
2. I also tried running the event trace to check the activities executed but found nothing.
Can you guys help me check on what I may have missed out?
Regards,

Hi All,
Basically these are the requirements for the work schedule substitution:
1. Employee enters the request via ESS (custom portal transaction)
2. Upon saving of the entry (request) in a custom table, this should trigger the workflow at the backend
3. The Manager should then receive a work item in his Universal Worklist at the MSS side of the portal
4. Upon clicking on the work item, a new screen will pop up showing the work schedule substitution details as well as an interface which will allow him to enter his/her usage decision
5. Depending on the decision, the workflow must execute the necessary notifications as well as changes in the custom and PA2003 tables
Now, we have accomplished step 1 and I am currently in the process for step 2. Now I have some queries:
1. For the Manager to view and approve the substitution details, I used two methods for each process (view and approve) since our ABAPer mentioned that this cannot be done in 1 function module. Is there a way to simplify this step or is it really valid that they need to be executed in 2 different methods?
2. As per our ABAPer, function Modules only import and export variables; they do not have the facility of say having tags on the details being displayed. Hence, if the details are 10001 (Employee Number), 10/20/2011 (Start Date), 10/25/2011 (End Date) the output would be 10001, 10/20/2011, 10/25/2011. Is there a way within the function module (or dynpro interface) to show it like this: Employee Number: 10001
Start Date: 10/20/2011
End Date: 10/25/2011
3. Speaking of dynpro applications, do I need to still develop one to allow the Manager to view and approve/reject the request via the MSS portal upon accessing the work item via the UWL? How would the work item go about calling the dynpro application? or is this even possible?
It would have been easier if the facility would not pass through workflows since it will be just direct web dynpro/ABAP calls. Having to include it as a work item in the UWL puts a certain twist to it
Your inputs are well-appreciated.
Regards,

Notification mail according to triggerring event in workflow

Hi All,
am doing customer master workflow using KNA1 Business object, it has event CREATE and CHANGE.
whenever event CREATE is triggering workflow, i want to send notification mail with title 'CUSTOMER 999 CREATED'.
whenever event CHANGE is triggering workflow, i want to send notification mail with title ' CUSTOMER 999 CHANGED'.
Could you please advise, how can i handle notification mail according to triggering event.
Thanks in advance.
Regards,
Balamurugan.

You can either trigger a 1 step workflow that has a send mail step. The triggering event of the Workflow should be CREATE and CHANGE event of BO KNA1. You have to activate the linkage between event and workflow in PFTC. You have to maintain some entries in SWE2.
After you have done this check your development from Tcode SWEL.
Thanks
Arghadip

Issue in Workflow

Hi Guys,
I have two issues in WF.
1. I have created Task and assigned function to that and in function i am raising an exception but in my WF log it doesnt show in error.
2. Normally if there are two person holding same position the WF goes to both of then and if any one of then takes the decision WF should go out from others in box its not happening for me.
Thanks
Atul

Hi Atul,
If you need to raise an exception in the workflow . It doesnot mean that Workflow should fails.
Following will be suggestion :
When Exception needs to trigger an error in Workflow Trigger Error Event to that instance use WAPI Interface for this,
Regards
Ajay

Missing ObjectKey OCCATIONALLY after workflow is triggered

System is ECC 6.0.
We have a customer workflow works fine most the time, but fails OCCATIONALLY with following message in workflow log:
Start Event Received                                     No errors
(Sub)workflow created                                 Variables of the work item text cannot be generated
   GET_VALUE_REF                                       Error in the evaluation of expression '<???>&BUS1505.IDENTKEY&' for item '1'
      EVAL_CONTAINER_ACCESS_CODE       Unable to determine the value of component ''
(Sub)workflow created                                  No errors occurred -> Details in long text
Workflow started                                           No errors occurred -> Details in long text
Exception occurred                                        Error when starting work item 000000966301
   PROCESS_NODE                                         Error when processing node '0000000969' (ParForEach index 000000)
      CREATE                                                   Error when creating a component of type 'Step'
          CREATE_WIM_HANDLE                       Error when creating a work item
             CREATE_VIA_WFM                    Error within method CL_SWF_RUN_WIM_BATCH->_CREATE_WORKITEM_CONTAINER
                 EXECUTE                                Source (expression '&BUS1505.CONTRACTNUMBER&') of binding assignment is not available
                     CL_SWF_BND_BINDING->EXECUTE Source (expression '&BUS1505.COMPCODE&') of binding assignment is not available
                          GET_VALUE_REF                         Error in the evaluation of expression '<???>&BUS1505.COMPCODE&' for item '1'
                               EVAL_CONTAINER_ACCESS_CODE Unable to determine the value of component ''
                     GET_VALUE_REF Error in the evaluation of expression '<???>&BUS1505.CONTRACTNUMBER&' for item '1'
                         EVAL_CONTAINER_ACCESS_CODE Unable to determine the value of component ''
Checked contain for BUS1505, it does have proper value in the key:14003000000000344
Anyone have experience this in their system? what is the solution?
Best Regards,
Jimmy Sun

Hi,
Got the same issue. Get the messages below for BOR ZKNA1 (copy of KNA1)
Workflow System            GET_VALUE_REF
Workflow System            EVAL_CONTAINER_ACCESS_CODE\
Strange thing is that it works in development but not in Quality. All config was transported though.
Any help appreciated since I am not very familair with WF.
Thanks

Error in event receiver in workflow for PO release strategy

Hi Expert,
I am trying to trigger an email through workflow for PO release. I have setup following
In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
In PFTC, under Triggering events, Object type BUS2012 is green light
When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

laurarice wrote:
Hi Expert,
>
> I am trying to trigger an email through workflow for PO release. I have setup following
>
> In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
> In PFTC, under Triggering events, Object type BUS2012 is green light
> When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
> Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

One step purchase order approval - Trigger only in certain cases.

Hi,
I want to trigger the one step workflow approval for Purchase Orders only in ceraitn cases.
When the PO is created from a shopping cart it has to be automatically approved. In other cases the workflow has to be triggerred.
I tried setting the no_further_approval flag to 'X' in the Approval BADI but did not work.
Any Suggestions?
Does the BADI BBP_WFL_APPROV_BADI work for one step approval or is it only for the n step?
Is it better to manipulate the start conditions?
Any help is appreciated.
Joe Vellaiparambil

Hi
If the workflow is not working as expected, refer to SAP Note 322526, Analysis for workflow problems.
You should go with making the start conditions work, as you are aware that only 1 level Approval is required. Try making changes in the start conditions by using transaction - SWB_PROCUREMENT.
Note ->This BADI - BBP_WFL_APPROV_BADI is only recommended for N-step dynamic approval workflow. I don't think you need this BADI as the first alternative.
<u>Refer to few links as well.</u>
http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/0e/bc7d3c6715c854e10000000a11402f/content.htm
Regards
- Atul

Payment release workflow for MIRO documents

Hi,
I have activated payment release function and successfully able to get workflow item for payment release for FI invoices posted through F-43 and FB60, but not on RE documents which are posted through MIRO,
Can some body provide inputs on how to trigger a payment release workflow for MIRO documents.
Thanks
Amanullah

Hi Amanullah, How are you?
Did you get an answer about this situation ? I am trying to do the same thing by FI or by MM and I'm worrying if we can to do by Standard SAP. In FI I'm trying to do via spro:
SAP Customizing Implementation Guide=>Financial Accounting=>Accounts Receivable and Accounts Payable=>Business Transactions=>Release for Payment
Did you remember how can you get the solution?
Thanks and regards,
Jeovana

Workflow for releasing blocked purchase orders

Hi,
We want to implement a workflow for financial approval of purchase orders. At the moment a purchase order exceeds a certain value, the order will be blocked and approval is needed from the responsible cost center manager. As we are completely new to workflow, is there some one that can help me with my questions below?
1. Is there a standard workflow in SAP (ECC6.0) that supports the above process?
2. What are the trigger points for this workflow (creation and change of PO?)
3. What are the required steps to set up this workflow.
Regards,
Ed

hi,
You can set up your workflow while you setup your release strategy..Before you do this you have to use authorisation in order to assign the role to a special person, in your case cost centre manager and follow on with your release strategy...
Creation n changibity will depend on the changability indicator defined under release indicator set up...
where you can choose as per your req. for eg 4, 5 or 6 etc...
you also take help of BI consultant if req....
Also you can find may threads reg. Workflow into SDN...
Regards
Priyanka.P

One Infopath 2013 custom list be access by 2 workflows

When accessing an InfoPath 2013 form that accesses a custom list, I have found that I need to split up an existing workflow 2013 into 2 workflows. This is due to the workflow 2013 does not contain some features that workflow 2010 contains.
Thus I have the following questions:
1. Can a workflow 2010 call a workflow 2013? If so, can you tell me how to make this call?
2. Can I have the custom list that is accessed and updated by both a workflow 2010 and workflow 2013? If so, can you tell me how to connect the same custom list to both a workflow 2010 and workflow 2013?

Hi Wendy,
You can click into the "parameters" and if there are any parameters need to be filled in the 2010 workflow selected , you need to give the values there; and if there is no parameters there, then you just need to click OK.
It depends on the steps in the 2010 workflow.
For "this item", I recommend to select Current Item as the 2010 workflow is created to be associated with the same list as the 2013 workflow.
You can refer to the links for more details about Start a list workflow:
http://blogs.msdn.com/b/sharepointdesigner/archive/2012/08/18/how-to-trigger-a-sharepoint-2010-workflow-from-a-sharepoint-2013-workflow.aspx
http://www.c-sharpcorner.com/UploadFile/anavijai/how-to-start-a-sharepoint-2010-workflow-within-a-sharepoint/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

PO Workflow triggering Issue

Hi,
I have a custom workflow created for PO and Contracts and they are working fine. But the issue is, as I want them not to trigger in workflow I removed the release stratergy and till last week it was fine. Recent we found that even there is no release stratergy defined for the PO and Contract workflows, the workflow is getting triggered.
Could anyone please tell me is it possible to trigger a PO/Contract workflow without release stratergy? If yes then what will trigger this and what should I look for?
I have the Receiver FM defined for this WF and it was there earlier also. This issue is occuring recently.
Please help me.
Thanks,
Murali.

Hi ,
First of all get the workflow name. Open the workflow in SWDD and go to Basic Data start event tab.
There deactivate the workflow .
If the workflow is still getting triggered, execute the transaction SWi1 and see the triggering agent for the WORKFLOW .
Go to that program or exit and remove the code or comment the code for executing the workflow.

Trigger XDO1 (BO-KNA1) Workflow?

Similar Messages

Maybe you are looking for