Triggering billing output for multiple emails

Hi Experts,
We have a scenario wherein a single billing document output gets triggered for multiple emails. The requirement is to send the invoice layout copy to multiple emails where we maintain customer mail ids in customer master record.
When tried ,we found option in customer master record and maintained multiple email ids to send the billing output.The system has considered first email id from customer master record and did not consider next mail ids from CMR. Could you please suggest now how can we suffice this requirement .
Thanks in advance.
KV

Dear Kv rekha,
Check whether the following thread helps you.
http://wiki.sdn.sap.com/wiki/display/Snippets/Howtosendmailtoadistributionlistoragroup+ID
Thanks & Regards,
Hegal K Charles

Similar Messages

  • Send billing output to multiple email adresses

    Hi,
    we need to configure our output determination to be able to send billing invoices via email to multiple recipients.
    In our old 4.6c environment it worked with output type 5 when we added multiple comma separated email-addresses to the customer master record.
    After applying some kernel updates, this does not work anymore.
    does anyone have experience with that?
    I tried to set it up for output media 7 (SAPoffice) and wanted to get it working with SAP distribution list. but I struggle and I am at the point where I feel like I have tried everything.
    Maybe it's just an easy setting I'm missing.
    Thanks for any help.
    Markus

    Huey,
    Read and processed your selection as you suggest. Run into issue when the output record is executed, get error message that ...
    Communication type  cannot be used
    Message no. SVN000
    Diagnosis
    Message type ZD08 should be sent with communication type .
    System Response
    Communication type  is not supported by the conversion module.
    Procedure
    Use one of the supported communication types:
    Printer (LET)
    Fax (FAX)
    Telex (TLX)
    X.400 (X40)
    Mail via Internet (INT)
    Mail via SAPoffice (RML)
    Any thoughts on this are appreciated. We are on ECC 6.0 SP14.
    Thanks,
    Jay

  • Billing document output needs to tigger for multiple emails.

    Hi Experts,
    We have a scenario wherein a single billing document output gets triggered for multiple emails. The requirement is to send the invoice layout copy to multiple emails where we maintain customer mail ids in customer master record.
    When tried ,we found option in customer master record and maintained multiple email ids to send the billing output.The system has considered first email id from customer master record and did not consider next mail ids from CMR. Could you please suggest how can we suffice this requirement .
    Thanks in advance.
    KV.

    Hi,
    Email Address is maintained in Table ADR6 against the address number of table BUT000 for a particaluar BP.
    If the custom code is used, following logic can be used:
    For multiple email address multiple entry will be there in ADR6 for the same address number. To send the correspondence to all email address, select all entries and concatenate them separated with semi-colon ( and pass the same to the email address field.
    This is working in our case where we are using a third party for creating and sending the PDF.
    Regards,
    Pranavjeet.

  • Single billing document for multiple delivery documents

    Hi,
    Can someone tell me how to configure or proceed to make single billing document for multiple delivery documents.
    Document flow: Contract--> Order---> Delivery----> Billing
    -Thanks

    Being an old member of the forum, there is no need to stress the importance of adhering to forum rules where it has been clearly spelled out to avoid posting repeated queries.
    If you search the forum or Google it, you will find lot of documentations available on the same topic.  Take the inputs and try on your own.  Still if you face any issue, update here.
    G. Lakshmipathi

  • One billing document for multiple deliveries which are for different PO

    Hi All,
    I have a scenario where i need to create one billing document for multiple deliveries.
    Payer is same
    Ship-to is same
    PGI date different
    Sales area is one
    PO different
    In standard SAP it will create seperate billing document for different PO
    Please advice if there is a different copy routine which will combine all the POs in one billing document.

    Hi Mr. Bhat,
    Go to VTFL --> Select the combination of your delivery type and billing type --> Double click at Item(Left side) --> Select your item category --> Click at details
    In the feild "Data VBRK/VBRP" --> I think the routine assigned is 601 (Inv.split - PO Num.) --> Now change it to 3 (Single invoice)
    Then try your process, Hope it helps.
    Regards,
    MT

  • Billing document for multiple sales orders

    Hi All,
    I am in to ECC 6.0. How can i get single billing document for multiple sales orders?
    Can anyone tell me those configuration settings?
    Thanks
    Patel J

    Dear Jaganath,
    For Single Invoice, for multiple Sales Order, following details must be same:
    1. Sales Document Type for all Sales Order must be same
    2. Payer
    3. Incoterms
    4.Payment Term
    5. Account Assignment Grp - Customer
    6. Billing Date
    7. Exchange Rate
    8. Foreign Trade Data
    Now, in Copy-Control Settings between Sales Order and Billing (T. Code: VTFA - Order to bill copying control), Select your combination for Sales Order-->Invoice;
    and Double Click: Item (from Left-Hand side, Dialog Structure) and Double Click on to your Item Category.
    Here, in Filed: VBRK/VBRP, maintain Routine: 003 - Single Invoice.
    Important: Also, if Sales Orders have different Divisions,
    T. Code: VOV8 - Sales Document Type Maintenance
    untick the Box: Item Division.
    T. Code: VOR2 - Common Division
    Assign those Divisions to Common Divisions.
    Best Regards,
    Amit

  • Can you establish different sounds for multiple emails?

    Can you establish different sounds for multiple email accounts? 

    Sorry no, sound/alerts is universal for different email accounts.

  • One Billing document for multiple Dilevery Documents

    Dear All,
             I m trying to generate one billing documents for multiple dilveries documents with Tcode : VF04. But it is generating billing documents for all the delivery documents.  M i missing any configuration or some thing like that.
    Suggestions?
    Regards,
    Vikas

    Hi Vikas,
    after you created the billing document there is one menu option protocol. If have it not 100% in mind and i am note able to test it for the moment.
    T

  • How do I set individual sound alerts for multiple email accounts?

    How do I set individual sound alerts for multiple email accounts?

    Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
    Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

  • Support for multiple email addresses in struts

    Hi,
    I need an example source jsp in struts which contains support for multiple email addresses (dynamic)
    Can I have source for this?
    Thanks

    I'm sorry, I don't understand what you mean - do you want to display multiple email addresses on a page?

  • Fax output for multiple recipients

    Hi All,
    Please help me to figure out how can I get the fax output for order confirmation and invoices. I have done config part necessary in the nace by creating fax output , assigning medium and all. We are able to get PDF attachment for out email output. But I am not sure what changes i need to ask abaper to make in there program in order to generate PDF for fax output.
    Please give me some suggestions.
    Thank you.

    hi
    please convey to your abaper to a Z table with a maintaince view which has to store email id of the group when ever that particular is getting triggering it has to trigger to all the group you mentioned in Z table.
    or
    if you are having any authrization group to which you have to trigger the mail say abaper to write a code on the group.
    regards
    balajia

  • How Can I set up Thunderbird for multiple email addresses

    I am using Eudora 7 to handle 6 email accounts on a Windows XP SP3 machine. I want to install Thunderbird on the same machine and import the email addresses. I have Eudora setup to store the data files for each email address in a different data directory. This allows me to have a different icon on the desktop for each email account. Clicking on an icon starts Eudora with the email address data stored in a specific directory.
    What I don't know is how to have Thunderbird import the different email addresses from Eudora to Thunderbird and how to keep the individual email address data separate in Thunderbird.
    Any help would be appreciated.

    I never used Eudora, so I can't tell much about it. In any case, I believe it's dead.
    Wrt multiple accounts in Thunderbird, there isn't much you can do wrong. Simply run the new account wizard and set-up the accounts you want (one at a time).
    https://support.mozilla.org/en-US/kb/automatic-account-configuration
    If any of your accounts are POP ones, make sure not to enable Global Inbox to keep them separate.
    http://kb.mozillazine.org/Global_Inbox

  • Email payment advice for multiple emails

    Hi There,
    I have configured the BTE 00002040, every thing works perfectly to send the payment advice to a single email id from vendor master but out client wants a copy of the payment advice also to sent to their group email id, so with the help of our abaper we are trying to hard code the group email id and try to send the email to both vendor email id and group email id but is it nor working.
    Can any body tell me how to send the payment advice to multiple emails?
    Thank you in advance
    Madhu

    Thank you Hugo,
    We tried this but for some reason it is not working, i know some body else also suggested the same on SDN but no luck.
    It works fine for one emaild from vendor master but not when we put the group email id in the program as a hard code.
    pl let me know, if you have any other thoughts.
    Thanks
    Madhu

  • Do I need Open Directory for multiple email addresses for Calendar users?

    Hey all,
    I have a single mac mini which I use simply as a calendar server for +/- 20 users. One day I might use Profile Manager to manage their iOS devices too. On the initial installation, we enabled Open Directory, although I'm not sure that it's required, and we have no plans re using it to manage network logins etc aside from existing calendaring.
    I'm working through a migration from a Lion Server.app install to Mavericks, and due to some data corruption issues, we'll probably just rebuild the server and reimport the users calendars.
    On my existing Lion Server installation, I can still use workgroup manager to assign multiple email addresses to calendar users, so that when a user invites another user to a calendar event using any of their email addresses (we have several variations), the invitation still gets pushed to the correct calendar user.
    On Mavericks, without installing Open Directory, it seems I can't do this (I've downloaded Workgroup Manager for Mavericks, but it obviously can't connect to a local open directory). If Open Directory is optional, I'd rather not install it, to avoid overhead and complexity, but I still need a way to manage these multiple email addresses (aliases doesn't cut it).
    Any ideas / suggestions?
    Thanks,
    D

    For Calendar server to send actual email invitations to an attendee, two things must happen:
    First, you need to configure Server.app > Calendar > Enable invitations by email.  Enabling that will bring up a wizard dialog that will step you through the IMAP and SMTP account settings.  The default values in that wizard will tell Calendar server to use the local Mail server (which you then would have to configure to use the appropriate SMTP relay, etc.).  Or you can change the wizard settings to refer to an external IMAP and SMTP server.  It is wise to use a dedicated IMAP account for Calendar server's use -- don't go using someone's personal IMAP account because there might be some "undesirable interactions", let's say.  If you need help configuring this for, say, a Gmail account, I can help with that.
    Second, the email address for the attendee must *not* be known to Calendar server, i.e. it should *not* be in the Directory.  As you probably found out, if Calendar server sees that the attendee has an email address that is in the Directory, the attendee is considered to be "local" and the invitation will be delivered directly to the attendee's calendar client.  If you simply leave those other email variations out of the Directory, Calendar server will consider that attendee "remote" and will send an actual email with a special attachment that calendar clients can understand. 
    Hope that helps.

  • Billing in the basis of billing plan for multiple schedule lines

    Hi All,
    I have one scenario in which we have created milestoen billing via project systems in sales order. Now Suppose I have three line items in my sales order and against each line items we have maintained multiple schedule lines. ex. 10%, 40%,50% respectively. Similarly for other line items also we have maintained the same. Now I need to generate invoice on the basis of schedule lines(billing plan). for ex. single Invoice covers 2 schedule lines out of total schedule lines in the line item. Similarly for other line items.
    Kindly guide.
    Thanks.

    Hi
    Your milestone billing plan integrates with PS means that you have an order related billing.
    Hence schedule line is a confusing word and I assume it as a billing plan.
    Each milestone-related billing date is blocked for processing until the Project System confirms that the milestone is completed. The billing block will automatically be removed once the milestone is achieved.
    Do maintain copy controls properly at item category level (VTFA) and your billing should happen standard SAP way.
    If still you face any errors, please post the screenshots.
    Thanks
    Atul

Maybe you are looking for