Triggering BW load via push buttom

All,
   I am on BW 3.5. For a occasion business scenario, we have a need to allow business users to fire off a process chain on demand. Essentially, what we want is a business person to be able to log into BW, go to a 'Z' transaction code, push a button, and have a process chain start - via an event that gets raised.
   We have done this, and it works - sort of. We have intermittent problems where by a developer has to go into the system and manually reselect the event to be raised, and re-activate the process chain.
   In our productive system, this is not acceptable.
   1. Has anyone ever done anything like this?
   2. If so did you use our solution of a Z transaction code and an event, or did you do something else?
   3. If not, what would you recommend to allow non-technical business users to kick of process chains at will.
Thanks.
Dave

1. Has anyone ever done anything like this?
Ans : Yes
2. If so did you use our solution of a Z transaction code and an event, or did you do something else?
Ans : Yes,we wrote program to raise event using BP_Event_Raise
3. If not, what would you recommend to allow non-technical business users to kick of process chains at will.
Ans : In our case we trained user to run this simple transaction.

Similar Messages

Data Loads via an Integration Interface

In our Demantra 7.3 environment, Open Orders, Pricing and Trade Spend all get loaded via Integration Interfaces (IIs). Those IIs get called after ep_load_main runs, and there is nothing in the workflow after those II calls.
So how does the data get transferred from the BIIO tables into sales_data and/or mdp_matrix? Since there is nothing in the workflow to do that, I would expect to see triggers on the BIIO tables, but there aren't any.

Hi,
Data is loaded from BIIO tables into Sales_Data/Mdp_matrix using a workflow step 'Transfer Step' in Demantra.
Transfer step takes the Import integration interface as input and load data from the corresponding BIIO tables into Demantra base tables.
Please check if there is a transfer step in the workflow after ep_load_main run.
Thanks,
Rohit

I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

Install disk drive from old computer in an external enclosure.
Then copy the complete iTunes library from the disk drive to the disk drive in the new computer.

My mail won't load via iCloud on my desktop. It comes up with the message "Missing resources". How do I correct this?

My mail won't load via iCloudonmy desktop. It comes up with the message "Missing resources". My network is working properly and I've checked Apple's reporting system to see if any systems are down (they are not). I am asked to submit the report to Apple (which I have)...but how do I correct this error sothat I can access my mail via iCloud on my desktop iMac?

Here is the error message information: DOES THIS HELP ANYONE FIGURE OUT WHAT IS HAPPENING? All other iCloud Services work.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers:   body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1031
initialized: true
name: cloudos-statechart
current-states: [
    active.application.displayingCurrentApp
state-transition:
    active: false
    suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 17 2015 11:35:32 GMT-0400 (EDT)        (1426606532298)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
1018646875
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers:   body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError

In which table the initial balances will be stored when loading via api

Hi all,
I am doing initial balances migration...
In which table the initial balances will be stored when loading though an api.. (pay_balance_upload.process).
First I have loaded data in to pay_balance_batch_headers and pay_balance_batch_lines tables..
Then called the api pay_balance_upload.process. and the data was reflecting correctly in front end.
But we need to reconcile the loaded data.. for that, can anyone please tell me in which the loaded balances would be stored..
I have identified two tables, pay_assignment_latest_balances
and pay_latest_balances
when I try to create a balance from frontend I can see the data in pay_latest_balances table..
But when I load via api I am not able to find it in any of these tables..
In addition to that can anyone please tell me when the data will be populated in pay_assignment_latest_balances and pay_latest_balances tables.
Awaiting for your help and quick response..
Thanks and Regards
Kishore

You have followed the correct process..As Vignesh said, you can use pay_balance_pkg.get_value to make sure you have the correct values uploaded but otherwise if you are able to see the values in the front end I wouldn't worry about the latest balances tables. These tables, as the name indicate, hold only the latest values and if a payroll (ran post the initial balance upload) has been rolled back, these are deleted since they are no longer available.
You can refer the below Metalink notes for a detailed explanation:
The Secret Life of Initial Balance Upload with Screenshots Example [ID 60057.1]

Initial load via usb, then switch to match

I have a iphone6 with 128g, and figured i can now eventually load most of my music on the phone. i know how to do this, no problem. i would however, like to switch to itunes match on my phone for future updates.
i am frequently on the road and i don't want to use my bandwidth to download songs that i can initially much easier and faster load directly from my mac at home.
i found an article that said, i should load via classic sync and then switch itunes match on, but this did just reset the content on my phone.
any idea how to do this, anything official from apple on this? i can't imagine to be the only one who has a lot of songs and changes his phone once a year ...

What do the target tables look like in terms of having the same data as the source?

Getting info on objects loaded via xml

Hello:
i am a beginner/intermediate as3 coder, and i am stuck on
something related to objects loaded via XML.
i am able to load JPEG images onto a simulated "shelf", but i
am trying to arrange them on the shelf (like a store shelf) so that
each new item is placed directly next to the previous item as they
load. i can get it to work on a very basic level by specifying the
spacing between items manually betwen the code, but to makre this
reuseable and efficient, the ideal is to have the "next" object
loaded be placed on the shelf based on the width of the previous
object. but when i try to access the width of the object that is
loaded via the imageLoader, i can;t find it. if i trace the image
loader wifth, it is 0; i have tried several ways to name the object
as it loads and then get/save its dimensions somehow, but i am not
having any luck. i use all the Lynda titles and i also use some of
the better books, but i just can;t seem to solve this.
any hellp would be appreciated.
thank you.

Thak you for this -- it did help somewhat, but i am still
stuck.
When i use the contentLoaderInfo listener, you are right, i
can discern the width of the loader. but when i do this it only
works for the last item loaded. here is my problem -- i am trying
to load graphics dynamically, and have each graphic go to it's
proper "place" on a simulated shelf -- so the foirst object might
go to (0,0), then next object should go directly to the right of
the first object, etc, etc. and i am loading all this dynamically
from an xml file. if i just specify a distance, then i can get
everything to load at uniform distances from each other. problem is
each of the graphics has a unique width, height, etc, so i need to
be able to "catch and capture" this info as each one is loaded.
when i wait until the entire loader has loaded, the only
peopoerties left for me to capture and use are the propoerties of
the last itm loaded.
any ideas on how to do this -- anyone?
thanks very much, i just can't seem to figure this out.

Urgent: Passing Metadata to SWF loaded via SWFElement?

Hi!
my problem: I have a SWF-Animation made in Flash. This animation will be loaded via a OSMF-Plugin as an overlay (SWFElement in ParallelElement). That works perfectly so far. But now I have to pass some Text (Metadata) to the SWF. Passing the metadata to the plug in works. But how does the plugin inject the metadata into the SWF or how do I access the metadata within the SWF?
Any ideas?
Thanks in advance,
Simon

Since the forums were down I played around on my own. I came up with the following solution.
I'm not sure if there are better ways that are more straight forward (e.g. with metadata etc.) but it works fine so far.
    override public function set proxiedElement(value:MediaElement):void {
      log( "proxiedElement was set" );
      var overlayResource:URLResource = new URLResource( OVERLAY_URL );
      var overlayElement:SWFElement = new SWFElement( overlayResource );
      overlayElement.addEventListener( MediaElementEvent.TRAIT_ADD,
        function(e:MediaElementEvent):void {
          if ( e.traitType == "displayObject" ) {
            var el:SWFElement = e.currentTarget as SWFElement;
            var dot:DisplayObjectTrait = DisplayObjectTrait( el.getTrait( MediaTraitType.DISPLAY_OBJECT ) );
            var loader:Loader = Loader( dot.displayObject );
            if ( loader.content.hasOwnProperty( "setMetadata" ) ) {
              Object( loader.content ).setMetadata(
                { title: "Grant Skinner", details: "FITC 2011 - Amsterdam" }
      var layout:LayoutMetadata = new LayoutMetadata();
      layout.width = 520;
      layout.height = 100;
      layout.bottom = layout.left = 0;
      layout.index = 999;
      overlayElement.addMetadata( LayoutMetadata.LAYOUT_NAMESPACE, layout );
      var durationElement:DurationElement = new DurationElement( 5, overlayElement );
      var parallel:ParallelElement = new ParallelElement();
      parallel.addChild( durationElement );
      parallel.addChild( value );
      super.proxiedElement = parallel;

I bought an HP 2050A deskjet. Loaded via CD PC does not respond to the printer please assist me

HP 2050A Deskjet Printer. Operating system Windows XP SP2 pack.
PC not responding to printer, i loaded via CD. had uninstalled it and reinstalled it , still does not respond.
Kindly help.

Hello metehangunaydin,
Please try the below steps so that you may atleast be able to print.
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

2LIS_03_UM - FULL LOAD VIA SETUP TABLE NOT EQUAL TO DELTA

Hello,
I try to load stock data with 2LIS_03_UM.
When I extract data using setup table and full load I don't get the same records as I get with delta load. Although the key figures values are the same, the documents numbers are different. Most documents from delta load are ML (material ledger) documents while documents from full load (via setup table) are mainly FI documents.
What can be the reason? How can I fix it?
Thank you,
Hadar

Hi,
Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
are you getting same values when compare to R/3 and BW data for some document numbers?

T510 loading via WDS

Hi
We have recently purchased some T510 laptops and trying to load an image via WDS.
We have downloaded and injected the drivers into the WDS image and tried to boot however it cannot load the network card.
I have then copied the drivers to a cd and tried to load via the drvload command, run wpeutil initializenework and still the network card does not load.
Tried vista and windows 7 drivers. Loaded the latest bios 1.15
It seems there is an issue here with either the drivers or more likely the laptop itself, anyone have some ideas?
Never had this issue where a driver will not load even via drvload.

It is only a 32 bit wim
I have tried to inject both 32 and 64 bit drivers from winxp, vista, windows 7.
at the command prompt after it fails i should be able to run drvload and load the drivers then get an IP, this does not happen.
It is the only machine, a t500 or m58 work fine.
Any other ideas?
Thanks

Sccm Agent will not install via push on SCCM 2012 to computers that have sccm 2007 agents

I can not install the sccm 2012 agent on client computers via the push method or selecting the computers in a collection and clicking on install client nothing happens on the clients.
Also another problem is when i install the clients manually on the machines there is no site code and i can not "find site"
in both cases teh machines did have the sccm 2007 agent and were working fine on that.

1.make sure you have created the boundary group first. if you cant push the agent via push method, check the log files.
2. also make sure that in your environment if you have a firewall then there are port need to be open for agent push.
3. also if you have installed MacAfee agent on your client machine make sure the policies are not blocking file and print sharing.
4. also the windows firewall need to open for file and print sharing of you are using push method.
did you try to push the agent via GPO?
IF not try to run the following script in one of the client machine. use this command in the command prompt.
in my case smssitecode is BLL
MP is the management point.
ccmsetup.exe SMSSITECODE=BLL /mp:sccmserver.contoso.com /source:\\sccmserver.contoso.com\sms_bll\client
run the above command in the command prompt of one of the client machine which you cant install the agent and see.

Dev app not loading via iTunes

I'm having trouble getting the development app that I've downloaded from app builder to load onto my iPad. I keep getting an error message via iTunes. Is anyone else having this problem?
I am updating an existing app, moved it to v27, it's single edition, and all my provisioning certs are in order. the one thing I can think of is that I requested a push notification certificate after I got my other p12s. Would that do it?

Hi Neil, this problem was resolved when I remade my certificates.
Thanks--lisa
Sent from my iPad

Issue Importing measures against dimensions loaded via SSIS

Hi,
We are new to BPC and currently working in a test environment. We are having issues with importing measure data against dimensions that we are attempting to automate via SSIS. I will apologize in advance for the long post, but want to give as many details as possible.
Here is the scenario:
We installed BPC v. 5.1 SP1 on SQL Server 2005, but have since installed SP2 and SP3.
We created our own app set as a copy of AppShell. We added some user defined dimensions and created a custom application as a copy of Finance.
For initial testing, we loaded members into all dimensions via the Admin console and the Excel member sheets. We also used the Import function in data manager to upload measure data into our custom application.
We are now trying to automate the population of members for some of our dimensions (Entity and 4 user defined dimensions).
All of our data is mastered in SAP (we're on ERP 2005/ECC 6.0) with replications to our BI system (7.0). We are using custom ABAP programs to create flat files for 3 of the dimensions. For 2 dimensions, we are extracting from BI via Open hub.
We have created SSIS packages to load data from the files into the relevant mbr tables. We're taking things one step at a time and currently are processing the dimensions manually via the Admin Console - making sure that "Process members from member sheet" is unchecked.
In our first attempts at loading dimension data via the SSIS package, we tried loading only a subset of the member data (forgetting about the measure data that had previously been loaded). Because we were missing members in the load files for which measure data existed, we received data integrity errors upon processing the dimensions. Once we loaded the full member data, the dimensions processed successfully.
Our issue comes now when we're again importing measure data. Before starting to "automate" our dimensions, I had successfully loaded several months worth of measures. I had also tested clearing out one month of data. Now, I am trying to reload that month of measure data. I am using the same file as I had used previously, but the Import function is now rejecting all records. The dimension members it is rejecting are valid dimension members, but they are all from dimensions we are attempting to automate.
Has anyone encountered an issue like this before? Even if you haven't, do you have any thoughts on what our issue might be? Any help would be greatly appreciated!
Thanks!
Shannon

There actually could be a couple different things. The processing of the dimension could have encountered an error and therefore did not update the sql dim table association with the dimension. You should check to see if the dimDIMENSION sql table actual have any members in it and if the members you are trying to load to are there. If there were any errors in processing the mbr table the dim table will be empty.
Also the automated update could have added extra character to the member name such as a trailing space which would actually make the dimension member name different than what is in the membersheet.
In your automated dimension update, it would be a good idea to update the membersheet as well as the mbr sql table. Then you can process the dimension from the sheet in the admin tool to troubleshoot any errors in your memberset.
- Sara

Post Goods issue after clicking on Load Starting push button

Hi All,
Post goods issue for deliveries, suppose if the shipment document is created for XXXX country do the post goods issue after clicking the push button loading start on. and if the shipment is created other than the XXXX Country do the post goods issue after clicking the shipment start button(Done by Standard SAP).
There will be validation table in background to identify which shipping point to allow Post Goods Issue before shipment completion. This will require enhancement of Delivery User Exit to incorporate above check based on below mentioned Z Table.
Z-Table
- Shipping Point.
- Delivery Type
Any body please suggest the user exit or any function module and how to start code for this particular requirement.
Thanks & Regards,
Narasimha

Hi,
You can write your own vaalidation on click of loading start button.
Go to include MV56AI_IS_ENHANCEMENT of program SAPMV56A.
Click on the circular button(Enhance).
Then Edit --> Enhancement Operation --> Create.
Create your enhancement giving it a Z name.
Then in this enhancement you can write your code.
For loading start you can write your code in the following fashion.
IF fcode = 'MM_ST03'.
business logic.....
ENDIF.
Regards,
Firoz.

Triggering BW load via push buttom

Similar Messages

Maybe you are looking for