Triggering my own punch in/out remotely

Hi,
I'm trying to figure out an elegant and clean way to trigger my own record, puch in/out from my 'quiet' room (aka closet) where I can't reach the computer. This way I can record without anyone's help. I don't want something super fancy and expensive either. I tried to see if maybe I can write an apple script to let me use my remote control that came with the iMac to trigger Logic Pro commands, but I can't seem to find info on having remote control commands via Apple Script. (hey trying to get creative )
I have a pedal for my motu which can send a signal to logic to start and stop recording, but that's not enough, I need to be able to rewind to a spot. set the punch in, hit record. Essentially like the old OTR controls.
I also though of trying to see if I can use Saling Clicker with my bluetooth phone to control Logic Pro that way, there doesn't seem to be a way to.
Any suggestions?
Thanks
R

And the winner is...
Tranzport. I got it yesterday, and I was driven by the fact that they also released 2 days ago a universal binary version of their driver. It is flat out amazing, I am so much more productive than using the mouse. Makes me think a Makie Universal Controller is not too far down in the future.
Thanks for this excellent recommendation.
R

Similar Messages

TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
GigabitEthernet0/0         10.4.3.1        YES NVRAM down                  down
GigabitEthernet0/1         10.12.10.26     YES NVRAM up                    up
Serial0/2/0                unassigned      YES NVRAM down                  down
Serial0/2/0.602            10.12.15.10     YES NVRAM down                  down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.

You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS?

Momentary punch in/out foot switch help needed

Hi all,
I'm looking to find a usb keyboard or device that i can use with LOGIC 9 to plug in a momentary punch in/out foot switch.
I have an M-Audio Oxygen 61 - but I can't tell if it has the input or not?
Thanks in advance

I might approach it like this..... Open your template song. In the environment, create a new transformer and check the box next to the icon in the inspector so that it shows up as a possible arrange track. Double click the transformer to open it and program it to transform sus pedal (cc#64 I think...) to some other unused controller. Select the transformer track in the arrange page, open your key commands and set the transformed cc data to the record toggle (delete the original sus pedal setting from the controller list). Save the template song with this transformer and arrangement with the transformer track in it. Now when you build a new song from the template, you can select the transformer track when you want to use the pedal for record toggle, and select the appropriate instrument's track when you want the sus pedal.
There are probably other (better?) ways of doing this.. one of the best things about logic..... Perhaps some one else will offer up a simpler way. It might just be easier to open KC window and delete the sus/rec. toggle setting when you don't need it and just reprogram it when you do.....

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

Air Web browser with drag out remote files

Hi
I'm new in AIR so I have few questions.
I want to create my own simple web browser where users can drag out files on desktop using links on web pages instead of normal OS download system.
I've found function which works fine when I use static url and name but I don't know method how I can actually get real url and name.
Method:
             addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
             public var fileDown:URLFilePromise;
             public function mouseDownHandler(event:MouseEvent):void
                fileDown = new URLFilePromise();
                fileDown.request = new URLRequest("http://www.example.com/file.txt");
                fileDown.relativePath = "file_name.txt";
                var promises:Array = new Array();
                promises.push(filePromise);
                var clipboard:Clipboard = new Clipboard();
                clipboard.setData(ClipboardFormats.FILE_PROMISE_LIST_FORMAT, promises);
                NativeDragManager.doDrag(this, clipboard);
Can anyone help with this ??

Until the introduction of file promises in AIR Athena, it has never been possible to drag remote files out of an AIR application.
You could refer to the http://www.adobe.com/devnet/air/flex/articles/using_file_promises.html
Hope this is helpful. Please let me know if I could help more.

Queries Greyed out Remote Control

Hello there
We have migrated from a Landesk platform to System center, and our admin team is used to seeing a main device view where they remotely control machines from. I have created the query I want but the remote control options are greyed out. I have been playing
with all types of queries and I can get some to work, but If I add a join to another query it just brakes it.. This is basically on the back of the below link.
http://social.technet.microsoft.com/Forums/en-US/a0e22223-0802-46a0-a1b7-048773620cca/sccm-2012-remote-control-from-queries?forum=configmanagergeneral
I would be grateful if you could provide me with any information, surrounding this topic area or if it is being reviewed in future releases.
Thanks

I have pretty much been doing that torsten.... but I just can not get the desired query to work..
The other annoying thing, is when I have a query that allows remote control.. I link it to a device collection.. and it doesnt display all the fields in the query..
Anyone else having these difficulties?
Are we going to see any improvements in this area going forward?

One note starts on its own when I use Remote Desktop connection

Whenever I use RDC to connect to my home server, One note start and pops up totally on its own on my local computer.
Can anyone explain why, and more importantly how I can stop this behaviour?

After hours of reading through forums and posts similar to this one, and knowing the proposed work-arounds were not going to be accepted by my client that was having the issue, I came to the conclusion that it had to be a print driver or the software that
gets installed along with the print driver on the server that was causing my issue.
I started searching and came across some Epson software that was installed on the remote desktop server when I was trying to get a scale house ticket printer to work as a network printer. The printer was not installed on the server but the software remained
in the add and remove programs list.
I removed the three Epson entries in the add and remove programs list and the problem stopped.
I don't know if this was mentioned above but the behavior I observed was that the print job was going to multiple printers, not just OneNote. I my case if I removed the OneNote pritner I would then get prompted by the Microsoft XPS Document Writer for a
file location to save to.
I could open the print queue for each of the printers that were getting redirected on my local machine, I would then log in to the remote desktop server that I was having the issue on. I could see the "remote desktop redirected printer doc" get
sent to each printer. If the printer was online it would flash for only a moment and the printer would ignore the job as if nothing had been sent to it. If the printer was offline the job would stay in the queue.
I think this was mentioned above so I will reiterate, don't approach the issue like it is a problem just with OneNote or with a particular driver from a particular manufacturer. We know at the very least that the problem can be caused by Samsung driver/printer
software and by Epson driver/printer software so it stands to reason that there can be other drivers/printer software packages that can cause the same problems.
I hope this helps!

Punch in/out and crossfades

I'm really surprised at how lousy the documentation is for Garageband '08. I'd just like to learn how to:
1 - Punch in on a track
2 - Smooth out the result of the punch-in (I belive that's called crossfading, correct)
Any help would be much appreciated.
Thanks,
Scott

I still haven't exhausted all the possibilities, but to add to these comments ... if you can't play along with the original track to "get ready" for the punch-in .... then I wouldn't really call it a punch in, and it's not the ideal solution, at least musically.
What was suggested to me elsewhere is to split the track where you'd like the punch in to be (which isn't ideal if it's in the middle of a phrase) and then delete what you'd like replaced. Then duplicate the track. Then you can record on the duplicated track, playing along with the original, without erasing it.
The part that I'm still not 100% clear on is how to combine the two tracks SEEMLESSLY (meaning with NO evidence of the edit). The first reply I got to this post talked about "curves", but I still haven't figured out if there's a simple way to do this.
There's got to be a decent way to do this ... if not, I'm going to have to learn ProTools LE.

Punch in/out latency issue!

I'm having a pause in my audio when I punch in and out of logic. The song is still rolling but the music stops for a second. I know this is a simple hardware setting. I can't remember if it's the buffer size. Anyway, is there a standard buffer size, etc...?
Thanks!!

Enable "punch on the fly" in Options->Audio

8.2.1 grays out remote speakers

I updated to iTunes 8.2.1 and now my remote speakers (which I access through my airport express) are grayed out. I've restarted my computer, unplugged and replugged the airport, and checked the iTunes prefs, making sure that "look for remote speakers with Airtunes" was checked. Don't know what else to try...
Any thoughts?
Thanks! --Brian

Hey Brian - here's how I did it. It takes some work - but really not that much.
I used AppZapper http://www.appzapper.com/ to remove ITunes completely. This uninstaller will remove all of the associated application extensions ITunes uses. In order to remove iTunes, you have to go into preferences of that application and 'uncheck' the "Keep default applications safe". (AppZapper is free for the first 5 uses)
Once you remove iTunes, you can download the previous version (8.2) from Softpedia at: http://news.softpedia.com/news/Download-iTunes-8-2-for-Mac-and-Windows-113083.sh tml
Download, install, and all should work. (You will have to review your preferences in iTunes, but the good news is the library catalog stays intact.
Let me know if you run into trouble.
-Shawn

Sync center issue in Windows 7: sync conflict zeroing out remote file

Hi,
I'm using Windows 7 RTM Prof Eng x64 on my laptop, and I'm making available offline a folder on a remote share with Offline files. The remote share is hosted on a Windows Server 2003 R2 Ent Eng x86 server. The server is a domain controller, but the laptop is not joined to the domain. The remote folder is like 320 MB, mainly images, doc, pdf and xls files.
Synching is usually working, but sometimes I observe the following: I modify a file on my machine, and later Sync center reports a sync conflict, although nobody else modified the remote file. When I check the remote file, it is full with NULLS, e.g. if it is a doc file, it opens as a lot of empty pages.
I used the same setup with Windows Vista without problems, it just started to occur when I switched to Win 7.
I could not reproduce the issue, but the problem could be related to the network setting:
- it is something like: laptop ---|public network|--- server ---|private network|
- I usually access the server from the laptop on a public network with just its netbios name, i.e. \\server. But from this network it is also accessible from \\server.domain.com and \\server-public-ip The small sync icon appears near the folder name only when I view it as \\server, and not in the other two cases.
- when I connect to with WLAN, then the laptop is connected to the private network. Here the server is accessible via \\server-private-ip or \\server.domain2.local. When I open \\server only the offline folder is visible (the server is also a firewall, which blocks SMB going out to the public network).
- the clocks of the two machines are not synchronized, but the difference is below 10 seconds
I could understand a sync conflict or not detecting that the local and remote file are the same, but the zeroing out the remote file part is quite mysterious. Have anyone seen something like that?
Thanks for the help,
Zoltan

Hi,
Did you find a solution to this issue? We are experiencing the same.
We have had users reporting that they have created a word doc whilst on the network. Saved it, then logged off and taken their laptops home. Worked on the file for a few hours, with several saves, closes and reedits. Then finally saved the file, logged off.
When returning to work and logging in whilst connected to the network the file then becomes 0KB. The file appears to be unrecoverable as backups are only of the server version. There is no previous versions recorded and the last edited is the data of the
original blank file. It would appear that the server version (Older) is overwriting the Local cached version (Newer).
This is obviously causing some serious issues for staff who have lost hours of work done at home. Has anyone else experienced this.
Servers run Windows 2008 R2, Clients Windows 7 Professional. Offline Files setup by Group Policy.
Regards,
Fraser

Defining own zoom in & out keyboard shortcuts

I have been looking for a decent PDF viewer with tabs for awhile and have found Dioretsa. https://itunes.apple.com/us/app/dioretsa/id411422230?mt=12 It's pretty great for everything except I'm having problems with the keyboard shortcuts for zoom in and zoom out. I want the behavior to be the same as in most of my programs: [Command and =] for Zoom In and [Command and -] for Zoom Out, both WITHOUT having to use the Shift key.
In the program the default Zoom In and Zoom Out shortcuts are shown in the picture below. They REQUIRE me to use [Command and Shift and =] and [Command and Shift and -] for zooming in.
This annoyed me so I wanted to define my own keyboard shortcuts under Keyboard preferences:
In Dioretsa, it now looks like this:
Zoom In now works as expected, without needing Shift. However, for Zooming out it doesn't work! I still need to push Shift.
I noticed how for Zoom Out the hypthen is BOLD here! In Keyboard Preferences it is not! Also you'll notice that there is no Shift key in the default Zoom Out shortcut in Diotretsa!
This behavior is really bugging me! Can anyone help? I tried setting Zoom Out to [Command and 0] and this works fine without having to use shift!

Richard Segedi wrote:
Another thing you can try, if you aren't already aware of it, is to put the mouse cursor in whatever you wish to magnify, then hold down the Control key and scroll the mouse ball upwards. Do the same but scroll it downwards to reduce the screen image to normal size. This works on everything on the screen. Takes a little getting used to but I find it quick and handy for a fast look at something too small to see otherwise.
Rick
ya, thanks, already 'discovered' that one by accident...so many shortcuts to learn!!!

Yet another nasty punch in/out bug

What is this?? Punching in before a region then punching out inside the region DELETES IT! This is in replace mode. Am I missing something here? Check it out:
http://www.youtube.com/watch?v=WqJ4hyYT1Ak

Murray Campbell wrote:
This quote from the 9.02 update page:
+- Flex Markers can align & snap to MIDI notes _Performing a punch-in recording with Replace Mode now behaves correctly_+
Isn't the problem discussed in this thread exactly the bug that 9.02 is supposed to have fixed?
This is not the problem. Replace mode was broken with the release of version 9, but was fixed in the 9.02 update.
The problem we're discussing here, is, the audio region that follows the punch out point often now disappears from the arrange page.

IPhone 4 typing on its own; and spazzing out

This is a major problem that has been occurring over the past week or so.
Happening from once to four times per day, my one year old iPhone 4 will do something quite strange and abnormal.
When I type anything; whether its on an app or just texting; it will either delete the sequence of letters or start typing and repeating letters on its own. Also, when I press any kind of button, the screen will spazz out in a way, and the button won't be pressed, another button in the close location to the button that was supposed to be pressed will be pressed.
I searched online for answers aside from apple.com, my last resort, and they all said to restore to factory settings.
I did do this, but this didn't work, because the first thing that happened when I typed in my wi-fi password for the first time was that it started to repeat A's, @'s, and O's. Then it seemed to stop.
This is now preventing me from logging into my restored phone because I can't pass the setup guide with the problems that are occurring.
For a while I was predestined to get a new phone, but then I realized I could just fix it. I guess not.
Somebody with the answer to this question, please respond, because it does seem that this question is somewhat frequent upon the community.
Thank you.

Auto responsive, non responsive, and random responsive screens have been discussed a number of times. If power off/on and soft reset do not work and restore does not work the alternative is the Apple genius bar to have it checked out...if the screen is faulty they usually just replace the unit rather than repair. If there is a cost it depends on warranty/AppleCare status.

Triggering my own punch in/out remotely

Similar Messages

Maybe you are looking for