Triggering of E-Mail With Creation or Change in Address of BP

Hi,
My requirement is to Trigger an E-mail with the all address records which are created or changed in a session of Creation or Change of BP.
Can anybody suggest me the approach for it.

Hello!
I guess note "[176559 - Interfaces for Business Address Services|https://service.sap.com/sap/support/notes/176559]" can be helpful in this context. BAS is an open interface to react on changes related to the BP-Address.
Best regards
Arno

Similar Messages

External Mailing with DIR status change

Hi SAP gurus
we have a particular senario,
where in DIR of Particular Document types at reaching a particular document status, a mail has to sent to the concerned relevent authorities for corrections and Approval.
(as and when the status changes to be mailed personalities also Changes)
how can this be achived if the mail has to be sent to there company or external Mailing IDs apart from SAP mail.
Can this be done using Document Distribution?
what is the Work flow activities involved (if required) for enabling this functions,
Thanks in Advance
Kumar K

hi kumar,
you can do it by doc distribution and activating some standerd task. and for mailing to extenal mail id , you have to activate SMTP, by tcode SCOT
but according to your requirement , you should consult to workflow consultent.
regards,
nitin
award point if useful

Send E-mail with payment advice to several address

Hi Experts
In our company in USA we set a payment through ACH, for it we need to send a payment advice to the vendor after we run process in F110, that process is run properly but the problem is we need to send some mails to more than one receiver, and the option to input it is in vendor master data, but at the moment to send e-mail the system only send mail to first address, some one have idea can I do for send to several address???
Thanks

HI,
I am assuming that you are using BTE 2040 or 2050 to achieve this. Instead of using the sample FM provided by SAP for this BTE, copy it to a Y/Z FM and then you can modify it accordingly.
My suggestion would be to create a custom table for the email addresses and pick the additional email addresses from there in conjugation with the Vendor master.
Regards

Using Mail with my school's email address.

I don't know if anybody can help besides my school's IT guy, but my school email is @georgiasouthern.edu. This is used as a Gmail App, so basically my school email is running off Gmail servers. I have tried setting up the POP and IMAP to allow it to work in the Mail application, but for some reason when I try to create my account, it can't find the smtp.gmail.com server for the outgoing mail...or the incoming mail for that matter. I have looked at Google Help and followed all the instructions to no avail. Please help me. If this post was too confusing, and you think you can can help me, e-mail me and ill try to explain better.

I followed everything on this website:http://mail.google.com/support/bin/answer.py?answer=86394 , which was sent to me from my school's IT specialist.

Help with Script to change IP Address

Hello,
So I am trying to generate three scripts for three different locations. These scripts need to just change the IP address for an application config file when clicked. How would I do this?
Thanks,

We as a company have 3 locations off our network. This OASIS application we use has IP Address in its config file for Meter Service and Poller. The application brings up information on that IP address. The only way right now for us to hit a different location
using that OASIS application , it by opening its config file and changing the two addresses in there. Then when we launch the application it takes us to that locations information within the OASIS application. I need to write a notepad script that a user can
click on that will automatically change the IP Address in that config file to a different locations address, so when they click to open the application it opens the location that I just ran the script for.

TS3276 On received mail, I delete sender's name, address, etc. then forward it. The forwarded mail has a duplicate of the original mail, show original sender's name, etc. How to prevent the duplicate from being sent?

How to prevent duplicate of orginal mail (with original sender's name, address) being "attached" when forwarded?

Maybe I am mis-understanding what you are seeing.
When I forward a message, the receiver will see the original mail (unless I edit it, such as removing any previous sender's information) and the length will be the same as the message was before forwarding except for the added line "Begin forwarded message" (again, unless I edit bits out), and there will be no attached copy of the original message.
So when you say in your reply above "The orginal email with the sender's name and address was also sent with my forwarded email." do you mean:
a) that it is still visible at the head of the text of the message (which I was saying does not happen for me because "after hitting delete, the previous sender's information disappears." [and since] "it has disappeared, it cannot be in your forwarded mail." Disappeared means it is not there.
b) another copy of the original message is attached to the forwarded email at the end, either as an included file or as repeated text.
c) some other situation.
Sorry about the previous mis-spellings! I hope that we can get to the bottom of this.

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

Creation of Change request with reference to existing change request

Hi
I want to do Creation of Change request with reference to existing change request for MDG-F and MDG c/MDG S Is it possible? If yes, How?

Hi Sanjay,
No , its not out of box functionality in MDG. Reason being, MDG framework provided some standard API's with the help of which we can do our development with ease.
Like Governance API                            : IF_USMD_GOV_API
       Convenience Governance API         :IF_USMD_CONV_SOM_GOV_API
       Change Request API Interface:       IF_USMD_CREQUEST_API
With the help of which you can play around with your data in MDG with the pre-defined methods of it.
Best Regards,
Kaustubh

I posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change t

I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
my e-mail - [email protected]

While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
We do not understand why this problenm occurs.
Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
I guess it is because of the **** Apple FIrmware written on the label.
Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
However Shootist007 thanks for your message, but given what I said I do not think is a cable problem.

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

I have Apple Mail on 3 devices, an iMac, Macbook Pro and my iPhone 4. I would like to operate mail so that any changes I make to one mailbox (delete, etc) will automatically sync with all mailboxes. Is this possible?

I have 3 emails address also running through mail, a Gmail account, live.com.au account and an icloud.com account. Every time I open my email on a different device all old emails I have previously deleted on another device still remain, I would like to be able to load my mailboxes with the latest changes still there is what I guess I am saying. Is there anyway of doing this?
Cheers

You need to set up all email accounts as a IMAP. Then, they will all be "in sync."
You cannot do this with POP accounts.
You should be able to change Gmail to IMAP, but I don't know about live mail.

CS02 - trigger mail at save with detail of changes

Dear Sapians,
I come through a requirement in which , i have to trigger a mail to authorized user with detail of changes done in CS02 by unauthorized user.
I got a BADI 'BOM_UPDATE' 'CHANGE_AT_SAVE'.
And as per my understanding change detail are in table CDHDR and CDPOS.
And in above table data is loaded after CS02 is saved.
So, no detail of recent changes done is reflected in CDHDR and CDPOS .
So, I am looking for some USER-EXITS or BADI , which help me out in this scenario.
Scenario is :--
a).
When changes are done in CS02 by some UNAUTHORIZED USER, changes has to be verified by AUTHORIZED USER, so change detail has to be send to AUTHORIZED USER.
Awaiting for your reply
Thanks,
Jeet

Dear
Sorry for not discussing the whole scenario.
Actually , If some unauthorized user gas done some changes in CS02 than BOM Status is to be '2',
so mail is needed to ask authorized user permission to set BOM status '1'.
But in the same time , authorized wanna know what changes are done. and changes are recorded in cdhdr and cdpos tables which is updated after after bom is saved not in between.
That why mail is needed.

How can change my E-mail with out loss any thing ?

how can change my E-mail with out loss any thing ?

Calling was a good suggestion. Apple Care had the wrong email address and changing
it for the Apple Discussions is not linked to Apple Care. The lady at Apple Care corrected
the email address on my record.
End of Shaggy Dog Story

HT5576 E-mail to Kdnci Alveamcunnina change their security questions with Apple Can I change the email link Barsaalh change the email to the main email with Apple

E-mail to Kdnci Alveamcunnina change their security questions with Apple Can I change the email link Barsaalh change the email to the main email with Apple

Contact Apple and ask the account security team for assistance: http://support.apple.com/kb/HT5699.

Automatic DIR creation when mailed with Subject

Hi SAP Gurus,
We Have a requirement where an user sends a Mail with the subject line as the DIR No (particularly the Document folder No in EDMS) with some document files attached to it,
The requirement is, based on the mail sent the system should create a DIR in DMS with the attached files placed inside the DIR automatically with out any manual interventions.
So we can have a list of DIRs created under one folder in DMS.
Please Explain in detail like how this requirement could be met, if it is an development also throw some light on the methord to be followed.
There are some scanner interfaces available in the market but we are not sure to go for any third party integration for getting this single requirement fullfilled.
Points awaiting for usefull suggestions
Thanks and regards
Priya S

The TDMC(Technical Document Management Connectivity) offering allows a customer to connect to their SAP Document Management System (DMS) via MS Outlook. This is achieved using a MS Outlook Plug-in that was developed in C#, which you can modify at the customer's site to include customer-specific information. The second part of this offering is the usage of SAP Enterprise Services (ES), which are standard as of ERP 2005. This offering uses a specific ES called DocumentBulkCreate. The final part of this tool is the SAP DMS itself.
This tool enables the following:
- From MS Outlook, the user has a context menu option to work with SAP DMS.
- By selecting this option, the user is prompted to add additional information about the e-mail (for the
standard offering the user is prompted for the project number but this can be tailored to the customer
needs via the C# program).
- After confirmation, the tool then checks this e-mail into SAP DMS via the ES.
- This creates a new Document Info Record (DIR) in which:
    1) Information about the e-mail along with any entered information via the prompt is automatically
       placed into the classification of this DIR.
    2) The body of the e-mail is saved as an original within the DIR as a *.txt file.
    3) Any/all attachments are stored as originals separately within the DIR in their original file format
       (such as *.ppt, *.xls, *.docu2026).
Within this document, you can expect to find step-by-step instructions on how to implement this toolset using the standard developed version. Some aspects of this implementation can be adapted to support customer-specific needs. Where applicable, the document attempts to point out whether customization of the offering is advised.
Please refer SAP Document, "Enterprise Services End-to-End Implementation Guide Using SAP® ERP 2005, ECC-SE SP3" from SAP Service marketplace.
Hope this helps.
Yong Kim

Triggering of E-Mail With Creation or Change in Address of BP

Similar Messages

Maybe you are looking for