Triggering scheduled video recording

Hi guys, I've searched quite a bit so forgive me if this is answered somewhere else here...
I'm working at a church and we're trying to record our sermons through a program called Wirecast. Currenty Wirecast does not offer scheduled recordings, so I'm wondering if it's possible to trigger the "record" buttong through ical and applescript. I know how to use ical to run scheduled scripts, but I'm having some issues actually triggering elements in the Wirecast application.
This is basically what I'm needing to do:
Open a saved Wirecast document
Select the appropriate video input source
start recording video source
delay 3600 or so...
stop recording
here's what I have so far:
tell application "Wirecast"
    activate
    open alias "Macintosh HD:users:jason:WeekendRecording.wcst"
    start recording
end tell
Here's what the Wirecast Library says about the "start recording" class...
start recording v : Start recording to disk
start recording any : document (or list of documents) to start recording for.
I would do this with Quicktime, but I'm having trouble finding my video source through QT.... I'm using a PCI Black Magic card to capture with.
any thoughts or direction here would be greatly appreciated! Thanks guys.
Jason

Don't have Wirecast but hunting around on the web (they seem to have a fairly active scripting community) I found
tell application "Wirecast"
set myDoc to document "smith"
start recording myDoc
end tell
which was reported to work.

Similar Messages

Diskspace quota with WVC54GCA video recording software

I'm using several WVC54GCA cameras with good results with one exception - I cannot get the diskspace quota feature in the video recording software to work correctly. I want to limit each camera to 25GB of video on disk, and overwrite older data when the quota is reached. My problem is that no matter what I specify for a quota, the system only will record 5GB before it starts to overwrite the older video. If I don't specify the quota feature, the system will record and save data until the disk is filled. If I enable a quota (25000 MB for example) and there is more than 5GB of video data saved, the excess over 5GB will be deleted.
Has anyone seen this kind of problem? Is the diskspace quota feature actually working for anyone?
Thanks in advance for helpful replies.

Have you tried un-installing and re-installing the Camera utility ?
Do you have the latest firmware installed on your Camera ?
Recordings can be scheduled and you can set disk quotas and many other parameters -
Disk Allocation for Each Camera Recording :
Total Disk Space is the total amount of storage space on your PC’s hard drive.
Available Disk Space is the total amount of remaining storage space on your PC’s hard drive.
Enable Diskspace Limitation if you want to limit the amount of disk space used by each Camera, check the box, then fill in the fields below.
Maximum allowed space per camera, Enter the maximum allowed space per camera in MB. The default is 1000 MB...I would suggest you to try 15GB and see how it goes with 15GB of Video on disk...See if it is still recording only 5GB of Video...
When allowed space is full Select the action to take when the space limit is reached, either Overwrite earliest file (default), or Stop recording...

Record Level Adjust for Audio in Voice Memo or Video Recorder

I would like to request that Apple allow me to adjust the record audio volume level when recording in Voice Memo or Video Recorder modes. Often I find that the audio is distorting and most times I cannot step back far enough to avoid distortion levels. While I love the ability to SEE the audio level in Voice Memo mode, I am hoping that it is only a matter of firmware upgrade to be able to ADJUST the record level.
Also, if it is possible, it would be great to see some indication of audio level when recording video... something simple like a bar graph with green, yellow and red bars with the highest level reached sticking for a few seconds so that I can tell what the level is.
An alternate solution (if none of the above is possible in a firmware update) would be to automatically adjust the recording level to prevent audio distortion.
Thanks for the great iPod and here's hoping for a great firmware update in the near future!

Thanks, I've submitted my recommendation to Apple.

Hi,,does the new 2011 imac 27 inch U.S version support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

CP 6.0.1.240 - Video Demo Project vs. Video Recording & YouTube

Hello,
I have a project with two small slide videos included. I recorded them using Record New Video Demo and I embedded them on 2 different slides using Video > Insert Video. Once embedded I added text captions etc and timed them to coincide with the video. When I preview the video, timing is dead on. When I publish to YouTube, one of the two videos delays noticeably and it throws off the timiing of all the related captions, etc. I tried F4V and MP4, I tried uploading using the YouTube button and directly, no change. I even tried manually pushing the timing of the captions out to see if I could account for the delay on YouTube but it doesn't have to do with the slide just the pre-loading or starting of the video on that slide. The fact that I have 2 slides each with an embeded video and one works fine and the other doesn't is driving me around the bend. I compared the two slides side-by-side and could not find any differentiating settings.
Does anyone have any other suggestions for me to try?
Thanks
Julie
UPDATE: I went back to compare side-by-side the videos and I have noticed a difference. One is called a Video Recording and the one that pauses for too long is called a Video Demo Project. I could have sworn I recorded them in the exact same way. This sounds silly but does anyone know what I did differenty; why one is a video demo and why the other is a video recorrding?

UPDATE: When I finally published the video to YouTube, the hiccup or pause on the background audio seems to have resolved. It was very evident in previewing the project and not noticeable once published to YouTube. I have a new issue now as it relates to pausing but not of the audio of the video itself. I will be posting a new thread for that.

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.

Nice try! Take a hike.

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Help me pick a new video recorder

I need a new video recorder. Please give me some suggestions in the $400-800 range. I have used a Hi-8 Sony, but the sound went, got old, etc.
My primary use will be videos taken for coaching and my family, which I will put into iMovie and eventually burn to DVD through iDVD. I have been using iMovie 4, but I will upgrade if that would be better. The coaching movies are about 25 minutes with many, many clips, as they are short highlights (2-10 seconds each).
I currently (and most likely for at least one more year) use an eMac 1.25 GHz G4 with 768 MB RAM and a superdrive.
So, give me some good options. I like having a decent screen (my current one is a whopping 3"), as I often show athletes their form during practice, although that is not my top priority.
eMac 1.25 G4 Mac OS X (10.4.4)

Hi! Purds,
You didn't say where you were from. I had to purchase a new camera last semester and having no job, I had no money. I went to the WALMART Website and was able to find a good camera at the lowest price. (About $50 cheaper than I could find the camera anywhere else!) They shipped it right to my house within three day.
And make sure it has FireWire! Sony has their own version of FireWire, i.Link, but you have to make sure that you can get the proper cable to use on the Mac.
Always buy the best camera you can afford!
Clay

Automatic Creation of Scheduled Master Record for Scheduled Master Data

Hi experts,
We know that MRU and Portion are Scheduled master data but Scheduled master record is transactional data. So it is obvious that we have to generate scheduled master record in every server wher we transport the master data manually. And we can generate records for a particular time span and after that time we have to generate the records again.
All I want to know that whether it is possible to get all the records generated automatically after certain period.
Thanks,
Arghya

Hi,
Scheduled records do NOT get created automatically , altleast not by any sort of configuration, in case you are looking for it.
Your can always create custom program to do so, but it isn't worth the effort.
You can create records for upto 7yrs ( do need to check but definitely for a period long enough)
Hope that helps!!!

Video recording issues (it jumps and the audio sto...

Dear Support team,
I was very satisfied with my phone for a couple of months but nowadays I've an annoying issue with the video recordings of my Nokia Lumia 920. I've noticed in the past few weeks that there's a "bleep" or a "jump" in each video I take. (Nokia Camera software, Lumia Black, RM-821_eu_hungary_434)
It's very dissapointing because every video is let's say faulty at some point of the video.
For example please take a look at the following video at 0:34 where not just the video "jumps" but the audio recording also stops for a couple of seconds:
https://www.youtube.com/watch?v=xD9R2x5Kx4c
The interesting thing is that during the next 21 minutes it did not make any mistakes while recording.
Please take a look at an another example at 3:31:
https://www.youtube.com/watch?v=hYQ5vNY-BUw
If you're interested in debugging the issue I can send you somehow (by FTP or so) the original files as well.
I have got more videos which are like this and it was shown like this on the phone's screen as well so I've ruled out the possibility to have an issue while transfering it to my PC.
I'm assuming that possibly there's something wrong with the Lumia 920's RAM memory or with the 32GB internal storage drive, e.g.: let's say bad sector like on hard drives.
The phone recently had it's first freezing while I was reading my facebook the phone suddenly went black and restarted.
I still have 1,5 year warranty on my phone but I've bought ~150 km far away so I hopeI won't need to travel there and wait for weeks and to travel there again to get my phone back! What do you suggest?
Is it possible that it's rather a software issue not a hardware? Or should I return my phone to the retail shop or is there any downloadable software patch to correct this issue? Is this a known issue to you?
I've noticed one more thing: when I'm using my phone for e.g. like 10 minutes it's back cover gets warmer and warmer somewhere around the camera; I thought first it's because of the higher processor and battery usage but I don't think it's normal. The "heat issue" is also present while playing with a game.
Info: my battery lasts for 1,5 day or so by very moderate usage, is it normal? (4 times a day wifi for 5-10 minutes, max. 1 pcs one minute call per day)
Thanks for your help in advance,
Best Regards
Richárd Márk NAGY

Hi All,
I'm shocked about this device as you know I was disappointed due to the video recording glitches previously, but what yesterday happened is the worst I could ever imagine: I've recorded 3 videos and from this 3 videos 2 are unplayable even on my phone and on my PC, it gives an error message: "The video failed to play".
The 2 files can't be seen in the camera roll only by using Pocket File Manager.
I was able to copy all files to my computer:
WP_20140802_21_16_58_Pro.mp4 - 661 203 084 bytes - playable
WP_20140802_21_22_19_Pro.mp4 - 3939 658 131 bytes - unplayable
WP_20140802_22_13_59_Pro.mp4 - 3235 991 965 bytes - unplayable
To me these 2 videos are really very important, please help me to recover them! Please tell me, how you want me to send the files as they're, ~4GB each, by using Onedrive or how?
If this issue won't be solved I'm considering NOT TO BUY a Nokia again! Can it be a hardware related issue, e.g. faulty internal flash? Should I return the phone to the retail shop?
Regards
Richard Mark NAGY

Error when starting new video recording

When I try to start a new video recording I receive the following error:
The operation couldn’t be completed. (OSStatus error -536870206.)
I am using Quicktime Pro on an iMac running Mac OS X 10.6.5. Quicktime will work with iSight but not with my PS3 eye (usb webcam). I am able to choose the PS3 eye from Quicktime preferences and the video screen will show up with video from the PS3 eye (so I know that Quicktime recognizes the cam). But the error dialogue box appears immediately.
Other information - I am using macam.component for Quicktime and the PS3 eye works perfectly with Macam.
Has anyone received this error before?

a2043 wrote:
When I try to start a new video recording I receive the following error:
The operation couldn’t be completed. (OSStatus error -536870206.)
I am using Quicktime Pro on an iMac running Mac OS X 10.6.5. Quicktime will work with iSight but not with my PS3 eye (usb webcam). I am able to choose the PS3 eye from Quicktime preferences and the video screen will show up with video from the PS3 eye (so I know that Quicktime recognizes the cam). But the error dialogue box appears immediately.
Other information - I am using macam.component for Quicktime and the PS3 eye works perfectly with Macam.
Welcome to Discussions, a2043
Has anyone received this error before?
I have not, but I do not use PS3 eye. If it is a "UVC" (usb video class) device, it should work with any Mac running Mac OS X 10.4.9 or later _without additional software drivers_. Some unnecessary drivers can conflict with your Mac's software.
If desired, you can remove the file macam.component from /Library/QuickTime and restart Mac to see if the PS3 eye can work with QuickTime without the additional driver.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Problems importing videos recorded from my iPhone 3GS to iPhoto

I am having problems importing any videos recorded from my iPhone 3GS onto iPhoto. iPhoto keep giving me the following error:
"Error downloading Image. iPhoto cannot import your photos because there was a problem downloading an image."
If anyone else is having the same problem, please advise on how to fix.
Thanks,

I am having the same problem...
and Image Capture ( didn't know we would normally be able to use it, but you can) also give an error
"Import Error"
Now I have used "ITimelapse pro" to transfer some timelapse movies (about 3 that are about 30 to 60 seconds long) that I made to the phone's photo library.. and I has a very long video that I mistakenly made - (15 minutes long or so) and I "trimmed" it to be a few minutes long. -- and used "JotNot" to send a photo to the photo library... otherwise I have only some regular photos (about 40 ) and about 2 regular videos in the library.
so any suggestions... ( I am emailing all that I can to myself ... maybe ridding everything will help)

How can I get Video Recording! on my Blackberry curve 8320 ???????????? HELP PLEASSEEEEE

Hi, Im a bet stressed out i just got the blackberry Curve 8320 from Tmobile and realized it has no Video recording however the person that sold it to me says they downloaded a program like a converter or something and they used to have video recording on it. Can you please tell me how i can get video recording on mine Please. Thank you.

to use video you need an upgrade. The name is handheld device software OS. I believe you have 4.2. 4.5 is required.
You have to wait for TMobile to release the 4.5 OS.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How can I share HD video recorded from my iPhone 4s

How can I send a video recorded on my iPhone 4s to someone so they can view it in HD? I tried sending the video via mms, but I understand the video will be compressed and the viewer will not see the recording in HD

Hey Ravengirlaa,
Great question! The answer is going to depend on how the photos were originally organized:
A) The albums were synced to your iPhone from iTunes
B) The albums were manually created on your iPhone from photos in the Camera Roll
The following excerpt would apply for situation B:
excerpt from page 71 of the iPhone User Guide - http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
If the photos were synced from your computer, please refer to this article (section "To delete photos and videos from your device"):
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
Thanks,
Matt M.

Stereo video recording is not working after updating to ICS

hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.

As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Triggering scheduled video recording

Similar Messages

Maybe you are looking for