Triggering workflow using error messages

hi all,
how can i trigger workflow from error messages?
thanks in advance

If this is a custom Error message put your code for triggering your Workflow just after that. Use FM SWE_EVENT_CREATE or SAP_WAPI_START_WORKFLOW.
If it is a Standard message used in SAP Programs then look for User Exit.

Similar Messages

Unsupported black in use error message for laserjet p2055

Receiving "unsupported black in use" error message for laserjet p2055. I replace the cartridge with a new one and the same message appears. Any suggestions how to resolve this issue?

Hi,
Does it become active if you go to System Preferences > Accounts and Click on the current Account Pic and attempt to take a Pic ? (you do not have to Set it as the Pic)
Go to System Preferences > Accounts
Click on Your Account (in the list on the Left)
The Right hand side will now show some options.
Clicking the current Pic will give you access to Edit Pic
One of the Options then is to take a Snapshot.
Take a Snap Shot but you do not have to "Set" the Pic.
This process will invoke VDCAssistant.
Explain further about the PRAM Reset please.
You should shut down the computer (Rather than trying to catch the Restart)
You should then Start the Computer holding down the AppleALT+PR keys and keep holding them until you hear three Start Up0 Bongs (Chimes)
This deletes some settings such as System Preferences Settings for the Volume (Sound) and Date and Time that may need resetting afterwards. (Others may also be effected such as Screen Saver)
On Spotlight.
This does not look or report on certain Folders.
At the Hard Drive Level this is Library and Syatem
In your Home Folder (Little House icon) it will not look in your Library.
com.ecam.iusbcam.plist and com.apple.ichat.plist
Are in your Home Folder/Library/Preferences
The Others are in the /Library at Hard Drive Level
7:15 PM Wednesday; June 3, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Triggering workflow using user-exits

Hi all,
can anyone tel me how a workflow can be triggered using user-exits??
thanks in advance

Call function module SAP_WAPI_CREATE_EVENT (with COMMIT_WORK = space) to create an event, and use the event to start your workflow (triggering event). Alternatively, you can start the workflow directly using the corresponding SAP_WAPI function module for that purpose. My recommendation is that you normally don't start workflows directly as it is a less flexible solution (or you have to build that flexibility yourself instead of using what you get for free with triggering events).
However, why are you asking this question? I started wondering after seeing you ask an almost identical question in [another thread|Triggering Workflow Using BADI; here.

Workflows - badi - error message

Hi Experts,
I have a requirement in workflows...where i need to display en error after checking a condition.
Is there any standard BAdI through which we can display error message on the status bar of UI..??
Any pointers shall prove really helpful.
With Best Regards
Kanika Chopra
Edited by: kanika chopra on Oct 8, 2008 1:02 PM
Edited by: kanika chopra on Oct 9, 2008 6:06 AM

Hi,
I suppose you are talking about the WebClient UI and not the SAPGUI.
For the first question: I do not know how to modify the status bar, but if adding a message to the message area (were all other CRM related information messages are shown) is enough you can use the global message container.
    lr_msg_service = cl_bsp_wd_message_service=>get_instance( ).
    MESSAGE e<<msg_number>> INTO lv_msg WITH lv_msg_v1.
    CALL METHOD lr_msg_service->add_message
      EXPORTING
        iv_msg_type   = sy-msgty
        iv_msg_id     = sy-msgid
        iv_msg_number = sy-msgno
        iv_msg_v1     = sy-msgv1.
Changing values of UI fields you got two options:
1. You modify the UI components code to change the field value over the GET/SET methods on some kind of event
2. You modify the underlying data in the BOL object.
Checking is done by simply adding a 'X' to the variable representing the checkbox.
cheers Carsten

Workflow 2010 error messages

I am working on a workflow 2010 so that I can use the impersonate step. When I am testing the step, I am getting a value that says an error occurred. When I look at the workflow history, it will point to a location where there a lots of 'overall' common
error messages. The link does not show you what your exact error message is.
Thus can you tell me if there is a place that keeps track of the error messages generated? Is there a log file for the SharePoint server. Basically I am executing a workflow 2013 that calls a workflow 2010.
Thus can you tell me if there is a place to locate the error messages and how would I locate these errors in the log?

Hi,
1. Yes you can. For this you have to make a REST call from your share-point designer workflow. User Call Http action and configure your REST end point to change the permission on list/list items. (This I haven't tried but quite sure it should work)
The same approach applies to accomplish to point 3.
2. After setting user/group permission use App step for workflow to edit permission.
Note : You may need to make multiple REST calls and learn how to use Call http action in SharePoint designer if you haven't work on that before.
You get REST end point to change group permission on list from here
https://msdn.microsoft.com/en-us/library/office/dn495392.aspx
To make REST call in SharePoint designer
https://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
Keep updating your progress.

Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.

Hotfix Released here:
http://support.microsoft.com/kb/2916846

"ipod cannot be updated...required file in use" error message HELP!

So I just updated my itunes with the new 7.0 and everything works great, except-- every 10 mins or so, I get this error message "The ipod "xxx's ipod" cannot be updated. The required file is in use."
Nothing happens, I just have to click "ok", but its really annoying. And it pops up again in a few minutes.
I seem to remember this happening before on another update but I don't remember what I did.
Anyone else experiencing this or know what to do?
Thanks!!

I am having the exact same problem -- Itunes version 7 update seems to have created this issue. I get this error message about every five minutes if my Ipod is plugged into my computer, "Ipod cannot be updated. Required file is in use." Super annoying. I noticed a solution posted on this forum but it doesn't seem to work for Macs. Does anyone have any suggestions?
G5 Mac OS X (10.3.9)

"Port In Use" error message when trying to sync Palm m500 to Windows Vista machine

An error message on my Palm displays "Error: Serial Port in Use (Serial 0307)" when I try to sync my Palm m500 to my Windows Vista (32 bit) Home Basic machine. It worked until about 3 months ago and I don't have a restore point that far back to try System Restore. I've upgraded to Palm Desktop 6.2.2 (was using 4.xx) and downloaded the PalmHotSyncSetup from Pimlico Software but nothing helps. Any ideas are appreciated.
Post relates to: Palm m500

I would try connecting the Palm's cradle, with the Palm in it, to your PC and then, in Device Manager, right-clicking on Palm Handheld #2 and selecting Uninstall Driver. Palm Handheld/Palm Handheld #1 could be visible if you connect the Palm to USB port you may have tried using perviously.
After uninstalling Palm Desktop, reboot the PC, make sure Palm Desktop 6.2.2 is installed (since you are using Vista) and then try reconnecting the Palm.
One last thing: Make sure that you are using a 32-bit version of Windows. There is no 64-bit USB driver support from Palm or ACCESS. If you do have a 64-bit version of Windows Vista installed, that would clearly explain why you are having so much trouble getting your m500-series PDA to sync. This thread tells you how to check for a 32 or 64-bit install of Windows.
Alan G

Using Error Message in BPM Error Handling Branch

Hello,
I closed the old BPM thread not to mix up different questions.
As I found out now a synchronous Send Step with Eror handling branch is working fine to directly handle errors.
As in the send step there could be several errors possible, e.g. XML validation fails, error in communication channel etc.
Is it possible to have access to the error message that can be seen in monitoring and use this as input parameter for message mapping for example?
Would be helpful because otherwise I just would be able to send back a generic error message to the sender.

Hii Florian,
Adapter module can only provide information about the failures in Adapters.
But other failures like XML Validations, can be informed depending on the mode of Validation.
As per help.sap.com
You can perform the structure check at the following points in PI message processing:
● Validation in the sender adapter
If the sender adapter has created the PI message, you can then perform the validation of the PI payload. If the structure of the payload differs from the definition of the data type provided for comparison, message processing is stopped. The adapter sends a synchronous response to the sender of the message, informing it about the structure error. The industry-specific adapters inform the sender asynchronously, as required by the RNIF protocol and the CIDX protocol.
● Validation in the Integration Engine
In inbound and outbound processing, *validation of the PI message payload takes place as a pipeline step *of the Integration Engine. If the structure of the message payload does not match the saved definition of the data type, an error description is generated. The error description contains status information and a list of all structure errors. Message processing is stopped. The message is set to error status and an error report is saved.
If validation takes place in the Integration Engine, the sender of the message is not automatically informed of the structure error. The message is set to error status and an administrator can process the message further using the Runtime Workbench.
So if you use XML Validation in Sender Adapter you can get back the Exception ( i think you need to do some java mapping here). Else if you are using Integration Engine, then alerts are there for them.
Anyway this discussion has opened a lot of To Be Explored area for me. I will keep looking for them.
Regards
Suraj

The backup disk image "/Volumes/Data/Neil-MacBook Pro (171).sparsebundle" is already in use. error message. How do I fix? Ideas

"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas please

Thanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help

Using Error Message Box in Flash

Hi,
Can i use errror message pop up in flash.Could some one give
an idea how can i do that error reporting?

Hii Florian,
Adapter module can only provide information about the failures in Adapters.
But other failures like XML Validations, can be informed depending on the mode of Validation.
As per help.sap.com
You can perform the structure check at the following points in PI message processing:
● Validation in the sender adapter
If the sender adapter has created the PI message, you can then perform the validation of the PI payload. If the structure of the payload differs from the definition of the data type provided for comparison, message processing is stopped. The adapter sends a synchronous response to the sender of the message, informing it about the structure error. The industry-specific adapters inform the sender asynchronously, as required by the RNIF protocol and the CIDX protocol.
● Validation in the Integration Engine
In inbound and outbound processing, *validation of the PI message payload takes place as a pipeline step *of the Integration Engine. If the structure of the message payload does not match the saved definition of the data type, an error description is generated. The error description contains status information and a list of all structure errors. Message processing is stopped. The message is set to error status and an error report is saved.
If validation takes place in the Integration Engine, the sender of the message is not automatically informed of the structure error. The message is set to error status and an administrator can process the message further using the Runtime Workbench.
So if you use XML Validation in Sender Adapter you can get back the Exception ( i think you need to do some java mapping here). Else if you are using Integration Engine, then alerts are there for them.
Anyway this discussion has opened a lot of To Be Explored area for me. I will keep looking for them.
Regards
Suraj

HT3275 Why would Backup suddenly stop and give me sparse bundle already in use error message?

The error message I keep getting is: The backup disk image “/Volumes/Data/Brenda Glim’s MacBook Pro.sparsebundle” is already in use. Help!

Because you are running ML and that is one of its bugs.
Even Lion can do it.
Wireless makes it worse.
Reboot the TC.. or reboot the network and it should go away.

"The backup disk image 'Volumes...sparsebundle' is already in use" error message

Since upgrading to Lion, I seem to be able to back up my MacBook over Wi-fi to an external hard drive attached to my Airport Extreme just fine. However, if Time Machine is in the middle of a backup and I interrupt it by closing my MacBook hence putting it to sleep, next time my MacBook attempts a backup I get the message "This backup disk image "/Volumes....Macbook.sparsebundle" is already in use. I've tried disconnecting all users from the hard drive in the Airport Utility, and then unplugging the hard drive and plugging it back in, and then it seems to backup fine, until I interrupt another backup, then the problem starts all over again.
I never had this problem before upgrading to Lion. Suggestions?

NateCook, I'm experiencing the exact same issue. I'd previously been enjoying how seamless Time Machine worked, wirelessly and automatically, to backup my MacBook Pro to a 2 TB drive attached to my Airport Extreme. I also liked that I had the flexibility to plug that drive directly to my Mac, via FW800 or USB 2.0, if I needed to. It would always work too, regardless of whether or not I interrupted a backup in progress. Now, with Lion, I'm constantly getting the same "This backup disk image "/Volumes....Macintosh.sparsebundle is already in use" error. I fix it by restarting the Airport Extreme but that's a pain in the butt to have to do all the time.
Can you verify whether or not the recent OS X 1.0.7.1 update helps fix this in any way? Or is the situation the same for you?
I'm loathe to "give in" and buy a Time Capsule to replace this setup, but I will if I have to... I want everything to work like it did before and I'm not willing to downgrade fom Lion back to Snow Leopard over this. I was hoping Apple would fix it properly, but since this isn't a "supported configuration" (even though we know full well it works just fine) I was afraid Apple wouldn't focus on this as a priority.
I'm also a bit fearful that the same issue will occur with a Time Capsule.. hmm... my hunch is I'll be finding out soon enough.

We randomly get the "specified Group is in use" error message when using the DIO Buffered Handshake In VI. How do we get rid of this?

We're using the DIO Buffered handshake in VI (PCI 6503 Board) to read TTL pulses from a wavemeter. Sometimes we are able to collect data, but sometimes we get this error message: "specified Group is in use". No matter how long we wait between taking data, we sometimes (yet not always) get this message. We have one group of 2 ports that we're reading. Is there a way we can get rid of this problem?

Hi,
Are you running any example program or your own?
1. This problem happens when you abnormally terminate the program, such as, by clicking on the abort button.
Say first time you run the programd and it runs fine and then abort the program. In that case, the DIO group is not cleared and hence the subsequent runs give the error that you said.
In such case I would suggest you to open the Device Reset.vi which is under Functions Pallete>>Data Acquisition>>Calibration and Configuration>>Device Reset.vi.
On the front panel of the Device Reset.vi, enter the device number of your card and run the Device Reset.vi. If you get an error on the front panel, then run again so the error goes away. Now run you DIO program and it should run fine.
The botto
mline is, dont abort the program. If it has no functionality incorporated to stop it depending on some condition, then incorporate it.
Please do let me know if my suggestion helped.
Sincerely,
Sastry V.
Applications Engineer
National Instruments

How do I fix sparsbundle already in use error message

I continue to get the following error message since updating to Mountain Lion: "The backup disk image “/Volumes/Paul's Time Machine/XXX’s MacBook Pro.sparsebundle” is already in use."

Welcome to Apple Communities
http://blog.mc-thias.org/?title=time-machine-not-completing-backup-due-to-backup -disk-already-in-use&more=1&c=1&tb=1&pb=1

Triggering workflow using error messages

Similar Messages

Maybe you are looking for