Triggers and actions stopped working, now plays start to finish

My edge file ive been animating has been working and working well... near the end of wrapping the project up i find!
that the preview now plays from start to finish,,, skipping all stop commands and button actions.
any way to fix to make it recognize the actions!
-Scott

Hello Scott,
This could be the sign that you have an error in your code in which case an animation will play to the end skipping all stops.
Please check at the bottom of your screen to see if you have an error message.
You can them click on  the arror in order to get the code window where the error occured as shown bellow. You will see a red dot. Then correct your error.

Similar Messages

  • Audio and Video Stops Working

    Hello,
    My audio and video stops working. It starts working again when I reboot. I'll leave the computer for a while, maybe overnight, and when I return the audio and the video on the iMac will not function. When I click Play on iTunes or You Tube nothing happens.
    Any suggestions will be much appreciated!

    Slight update.
    I found this thread: http://forums.adobe.com/message/4872302#4872302
    It gave me some of the links I had been desperately looking for. I have an intel on board GPU and the GTX 675 MX. Because of MSI's bios, there's not a lot I can do in there to ensure that the computer is using the GTX over the Intel. I found some settings which give preferences for which card to use for which programs. PPro had the Nvidia already selected, but I went so far as to completely remove the Intel from all of the settings. Still no change. Today I went as far as to actually disable the intel GPU in the device settings. I rebooted and I wasn't getting anything in PPro. I switched her to software acceleration and it asked me if I wanted to delete the previews. I said yes and now she can see again. Of course I have NO clue yet if this is a permanent change or not. I do want the Hardware Acceleration, so leaving it in Software Mode is not a long term solution. It gets her working tonight, so on that note I'm happy.
    Time will tell if this helps or hinders, but it's some sort of movement.

  • Itunes doesn't play certain songs and just stops working

    it was fine a couple of weeks ago but now it just doesn't play some songs and whenever I doule click those songs it went straight to "Itunes has stopped working." and I have to close the program. Today I just bought a song from Itunes store and it doesn't play either and Itunes stops working as well!!
    Please help. this is so annoying.

    @ King-Penguin -- no, they don't and that seems to be the problem, thanks!
    Why are the ticks important, and do you know how I can tick my entire collection?
    Richard

  • When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

    When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
    == This happened ==
    Every time Firefox opened
    == I tried to download firefox. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

    When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
    When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
    If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
    Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

  • Why does Itunes stop working when I start to play a movie

    Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.

    I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.
    Now it is not working even with fliping, is the problem with hardware or software?
    Is any soloution to solve the problem?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi,
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

    A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

    Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
    For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

  • I used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my phone and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated

    i used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my iphone 5  and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated and im really unsure of whats the case. i really really need help with this. please help asap!!

    Presuming you are using a wall charger - it would seem that your battery needs to be looked at in an Apple store

  • I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

    I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

    I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
    Otherwise I´ll go to the Genius Bar to do a checkup.
    Good luck!
    It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode.  This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content.

  • Bluetooth stops working now and then

    My bluetooth stops working now and then. Let's say I haven't used bluetooth for a few hours and I want to sync my mobile phone. I try, but it's unable to connect. If I then try to turn off Bluetooth, I'm unable to turn it back on. In Bluetooth preferences, the status will be 'Off' and the 'Turn Bluetooth On' button is greyed out. The only way to get Bluetooth working again, is to restart OS X.
    Help!

    1. Boot from your system CD, run Disk First Aid and repair your permissions.
    2. Then try running it with Airport turned off.
    3. Reinstall the original RAM and run it that way for awhile.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • I have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks

    i have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks

    Please read these and proceed accordingly:
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    http://forums.adobe.com/docs/DOC-2325

  • Starting problems, computer freezes, keyboard and mouse stop working

    Hi can anyone help? My powerbook has just stopped working, rarely starts, when it does keyboard and mouse stop working after a while or even before i am able to login. At one point I was getting a grey screen with the words, memory access invalid???? Please help...
    powerbook G4    

    power surge could have damaged something inside, or it maybe unrelated to the problem.
    PowerBook can get hot if there is some short circuit inside and power flow is disrupted, also it's possible that the fans are not working properly.
    as a guess, it is likely either hard drive or logic board problem.

  • Apple wireless mouse and keyboard stop working ... now says OS X version and bluetooth incompatible

    For no apparent reason my apple wireless mouse and keyboard stopped working. I was not upgrading or installing anything, the batteries are good, nothing was changed as far as I know. Now bluetooth discovers the paired devices, connects for about 30 seconds, the disconnects ... or stays connected but doesn't work.
    What's happenned ... I'm rushing to finish a big job ... any ideas? I've tried re-pairing but doesn't work ... says that OSX version may be incompatible with device bluetooth ... I'm using Lion so maybe there is another lion problem?

    Hello:
    Barry: What do you mean with "making devices favorites"?
    This is the method:
    Go to system preferences>bluetooth.  Highlight an item in the sidebar.  If detailed information does not appear, click on the little gear and select show more info.  Then click on the gear again and select favorite.
    And how could an hardware-related problem be (temporarily) solved rebooting the OS?
    Intermittent problems are, IMHO, most often caused by hardware.  Restarting will occasionally "fix" problems - why, I do not know.
    Barry

  • I've set up a new iMac and transferred my library.  Now, when I switch on iTunes Match it gets to about 25% on stage 1 and just stops working,  Anyone know how to fix this?

    I've set up a new iMac and transferred my library.  Now, when I switch on iTunes Match it gets to about 25% on stage 1 and just stops working,  Anyone know how to fix this?

    Ok, so the likely cause is 1 or more Songs are tripping up iTunes Match.  To resolve, move to Song view, switch on iCloud Status and iCloud Download fields - sort the view on iCloud Status - identify Songs with status other than Purchased, Matched or Uploaded.  Temporarily remove them from the library, allow iTunes Match to complete the 3-step process.  Gradually import the Songs back in - any that cause a repeat failure, place in a playlist, burn to audio CD and import as 256k AAC.
    Note:  iTunes Match service in UK at present is intermittant, may be worth trying from 1200 tomorrow to give Apple the chance to complete its current updates.

Maybe you are looking for

  • How do I use hotmail via Blackberry services and not via phone network so not using up my data?

    Hi, I have a new Blackberry 9360 and am having trouble with it. They said in the shop that I can access my yahoo mail without using up my 250mb of internet data, so can access it using the Blackberry services rather than the internet. I can't work ou

  • How do I recover a window that has gone off the screen ?

    The upper and right hand sides of my "Adobe Elements Organizer" application window have gone permanently  off my Imac screen and try as I might, I can't drag or minimize this window to centre it on my desktop as a much smaller size and thereby recove

  • Send  Word attachment on iPhone?

    Can I add a Pages or Word or PDF document as an attachment on iPhone3G? I need to write a document on my laptop when abroad and then send it via my iPhone (I am often in remote areas away from wi fi). Can I email the Word or PDF to myself, download o

  • View of Txn MM02

    Hello all, I wanted to change the view of BasicData1 in MM02 .Under Basicdata1 tab in  Dimensions/EANS I want fields  length , height and width of the material , is it possible to change the screen ..if so how ? Regards Edited by: BrightSide on Jun 9

  • 4.1 Error Handling Confusing

    Hi Everyone, I have a few pages running under 4.1 that are generating errors that look like this: Error     Error processing condition. ORA-01403: no data found Technical Info (only visible for developers) is_internal_error: true apex_error_code: APE