Trillium Data quality connector for SAP

hi
this is my first time in this forum, so if this is not the correct area to post this, mods please move the appropriate area.
as the subject mentions, i just want to know if anyone have any business documents regarding this data quality connector for SAP. any kind of documentation will be helpfull. thanks

Please check the newly created MDM Data Enrichment page on SDN. It provides useful information: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/60368290-4d9e-2910-1480-bb55167ee3c3. [original link is broken]
Regards,
Markus

Similar Messages

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Data Quality tab for migration isn't working as expected.

I was doing a test migration from DB2 (9.7) database to Oracle 11g using SQL Developer Version 3.2.20.09 Build MAIN-09.87. I found that the Data Quality tab for record count comparison from migration project wasn't working as expected.
It’s not showing the record count from source database. It is showing following error in logging page after every refresh. It is happening because tool is populating SOURCENAME as "DB2"."SCHEMANAME"."TABLENAME" whereas the SOURCENAME should be consist of schema name and table name only. I have gone through the MD_META package and Database views, which are written for repository and found that its appending catalog name in case of source database is DB2.
Is this a known issue? Do we have fix available? I think we need a change in QUOTE function of MD_META package and DB views. Please suggest.
SEVERE 1377 2 oracle.dbtools.db.DBUtil Warning, unhandled exception: DB2 SQL error: SQLCODE: -204, SQLSTATE: 42704, SQLERRMC: DB2.CDSWEB.PRODUCTLICTYPE

Hello,
Is this a known issue?
Yes, it is a known issue. Bug 11778359: DB2:RUN DATA QUALITY REPORT GET UNHANDLED EXCEPTION: DB2 SQL ERROR
The bug is unpublished so you can't see it in My Oracle Support, I just mentioned it for reference.
Do we have fix available?Not yet. A fix shall be available in a future version of SQL Developer. Don't ask me in which one and when, I have no idea.
I think we need a change in QUOTE function of MD_META package and DB viewsI don't agree. I don't know what might break if you manipulate that package.
Sorry that I have no better answer.
Best regards
Wolfgang

Oracle Determinations Engine Data Source Connector for Batch Processing?

I have been trying to find +"Oracle Determinations Engine Data Source Connector"+. I have OPA 10.2 installed.
Where can I find this in the installation directory? or Does it not come as a part of the standard installation?

For 10.4 we have a new runtime which does what the Data Source connector does plus a whole lot more.
The feature to look for in the new release is the Batch Processor, and you will find the documentation and the application in the Oracle Policy Automation Runtime zip file.
The documentation has been upgraded and it should be a lot easier to use than the old DSC.
Cheers
Frank

Where Analytic Integration Connector for SAP BW V11

The latest version is 9.3.1, why no v11? Essbase studio do not support SAP BW.

Thanks Ingo Hilgefortfor your reply.
My queries is
1.    We have only abap instance , Java instance is mandatory for BOBJ ?
2.    We installed BOBJ edge 3.1 in Linux server and in same server we installed Integration kit for SAP ( during the installation of
       integration kit no input related to connected server ( BW server ) how to integrate BOBJ edge 3.1 with BW server) what
       Next ?
3.   after installation of integration kit and import transport request in BW server ( which in actually act as client in ECC 6 server)
      when we goto http://server:8080/CmcApp then to Authentication it shows enterprise and Ldap no SAP authentication I also
      download java connector and place it ..../Tomcat/shared/lib/sapjco.jar ?
Regards
Shahid

R3 connector for SAP netweaver 04

Hello, i'm a newbi here so i would be glad if someone could help me with Netweaver 3r connector.
we have a test EP6.0 portal with connection to 3r system. but i want to try and setup the 6.40 portal. everything is ok the the 6.4 portal. but i can't det get portal to connect to R3 System.
in 6.40 i don't get this options.
Application Host
Sap client
server port.
i guess they are a must for connection to the R3 system.
Thankz mates. hoping for a good answer
Geirka

Hi,
have a loot at my Weblog https://weblogs.sdn.sap.com/pub/wlg/736. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] It describes how to create a SAP Transaction iView using SAPGUI for Windows. Hope it helps you.
Regards
Gregor

DCOM Connector for SAP SAP 5.x

Does any one know that the DCOM Connector works with SAP 5.x for BAPI calls? Or SAP 5 only works with .Net Connector?
Regards,
Jingmin Wei

I've answered to this question in the thread:
SAP DCOM Connector Download
Check it.

Data storage solution for SAP BO

Hello,
Is there a storage platform that SAP prefers for Business One SQL databases? For example, Storage Area Networks? Some big storage Vendors are HP, EMC, is there a preference on which vendor and which product?
I would appreciate it if you could share any of your experience on this topic. Thanks.
Yi

Hi Yi,
I suppose this forum may not be the right place for this question since it is mostly about the SAP Business One SDK and related questions.
I propose that you contact your SAP sales representative who should forward you accordingly - or give you the information you are asking for.
I remember having heard about special offerings from hardware vendors for B1 partners customers, but I don't know about any recommendation.
If you would like to get recommendations from other partners or customers, I would suggest that you ask the question in the SAP community forum (www.sap.com/community) or the SAP Business One forum on Channel Partner Solution Network (CPSN): http://cpsn-channel.sap.com/businessoneforum
HTH,
Frank
Message was edited by: Frank Moebius

Just used Match consolidations & match comparison with data quality for add

I recently started to look for jobs on BODS and data quality i used data quality match consolidations.
Are there any ither impt elements which are widely used in the industry from data quality perspective?
Kind regards.
Edited by: cplusplus1 on Feb 8, 2012 7:08 AM

I am not entirely sure I understand your question. We do have Data Quality blueprints for use in Data Services available. You can find these on the SCN.
The SAP Community Network hosts several Data Quality blueprints which are available for download. Go to http://www.sdn.sap.com/irj/sdn/ds, and if necessary enter your user id and password or create an account.
Scroll down to Downloads and click the link in Samples Data Services Blueprints. There are several download packages that specialize in different areas and one that has all available samples contained in one download package.
Note: A "review" page displays after clicking the link of the blueprint to be downloaded. Click View this Code Sample to download the file.
Hope this is helpful.
Thanks,
Paula

Oracle Enterprise Data Quality for ODI

Hi,
1.     Can we install the below EDQ products on single machine
-Enterprise Data Quality Profiling for Oracle Data Integrator
-Enterprise Data Quality Batch Processing for Oracle Data Integrator
2.     How do we size EDQ ? and what is the preferred architecture ?
3.     Does “Enterprise Data Quality Profiling for Oracle Data Integrator” & “Enterprise Data Quality Batch Processing for Oracle Data Integrator” have same installation media ?
Thanks & Regards,
NC

You should find all you need in the Getting Started guide in the online help.
I recommend using the introductory wizard when first launching Director- this will take you through creating a project, connecting to some data, and creating a profiling process.

OPA Data Source Connector failed to run on Linux server

When I run data source connector for java on linux server using:
java -Xms512m -Xmx512m -classpath "/usrfile/OPA/DataSourceConnector/lib/determinations-engine.jar:/usrfile/OPA/DataSourceConnector/lib/log4j-1.2.15.jar:/usrfile/OPA/DataSourceConnector/lib/sqlitejdbc-v044-native.jar:/usrfile/OPA/DataSourceConnector/lib/determinations-data-source-connector.jar:/usrfile/OPA/DataSourceConnector/lib/jsr173_api.jar:/usrfile/OPA/DataSourceConnectorlib/sjsxp.jar" com.oracle.determinations.connector.DataSourceConnector /usrfile/OPA/DataSourceConnector/data/DEMO3/run/DEMO3.xml -debug
I got the following error message.So I think the path “..\conf\configuration.xsd” is hard coded and it raised this error. The detail error log is:
27-12-2010, 11:35:20, INFO , Processing file /usrfile/OPA/DataSourceConnector/data/DEMO3/run/DEMO3.xml.
27-12-2010, 11:35:20, ERROR, /usrfile/OPA/DataSourceConnector/bin/..\conf\configuration.xsd (No such file or directory)
org.xml.sax.SAXException: /usrfile/OPA/DataSourceConnector/bin/..\conf\configuration.xsd (No such file or directory)
at gnu.xml.validation.xmlschema.XMLSchemaSchemaFactory.newSchema(libgcj.so.7rh)
at javax.xml.validation.SchemaFactory.newSchema(libgcj.so.7rh)
at javax.xml.validation.SchemaFactory.newSchema(libgcj.so.7rh)
at com.oracle.determinations.connector.schema.validation.Validate.compileSchema(Unknown Source)
at com.oracle.determinations.connector.schema.validation.ValidateSAXStream.<init>(Unknown Source)
at com.oracle.determinations.connector.XMLTools.validateXML(Unknown Source)
at com.oracle.determinations.connector.Configuration.<init>(Unknown Source)
at com.oracle.determinations.connector.DataSourceConnector.kickOff(Unknown Source)
at com.oracle.determinations.connector.DataSourceConnector.main(Unknown Source)
Caused by: java.io.FileNotFoundException: /usrfile/OPA/DataSourceConnector/bin/..\conf\configuration.xsd (No such file or directory)
at gnu.java.nio.channels.FileChannelImpl.open(libgcj.so.7rh)
at gnu.java.nio.channels.FileChannelImpl.<init>(libgcj.so.7rh)
at gnu.java.nio.channels.FileChannelImpl.create(libgcj.so.7rh)
at java.io.FileInputStream.<init>(libgcj.so.7rh)
at gnu.java.net.protocol.file.Connection.connect(libgcj.so.7rh)
at gnu.java.net.protocol.file.Connection.getInputStream(libgcj.so.7rh)
at java.net.URL.openStream(libgcj.so.7rh)
at gnu.xml.validation.xmlschema.XMLSchemaSchemaFactory.getDocument(libgcj.so.7rh)
at gnu.xml.validation.xmlschema.XMLSchemaSchemaFactory.newSchema(libgcj.so.7rh)
...8 more
I have checked the file path using following command:
[root@bjx4 ~]# more /usrfile/OPA/DataSourceConnector/bin/..\conf\configuration.xsd
/usrfile/OPA/DataSourceConnector/bin/..confconfiguration.xsd: No such file or directory
[root@bjx4 ~]# more /usrfile/OPA/DataSourceConnector/bin/../conf/configuration.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://oracle.co
m/determinations/connector/data-source" targetNamespace="http://oracle.com/deter
minations/connector/data-source" elementFormDefault="qualified" version="10.0.0:
20091013" xml:lang="en">
<xsd:element name="configuration" type="configuration-type"/>
<xsd:complexType name="configuration-type">
<xsd:sequence>
<xsd:element name="threads" type="threads-type" minOccurs="0" maxOccurs
="1"/>
<xsd:element name="run-limit" type="run-limit-type" minOccurs="0" maxOc
curs="1"/>
<xsd:element name="time-out" type="time-out-type" minOccurs="0" maxOccu
rs="1"/>
<xsd:element name="unknown-value" type="unknown-type" minOccurs="0" max
Occurs="1"/>
<xsd:element name="uncertain-value" type="uncertain-type" minOccurs="0"
maxOccurs="1"/>

<xsd:element name="data-sources" type="data-sources-type" minOccurs="1"
maxOccurs="1"/>
<xsd:element name="data-mappings" type="data-mappings-type" minOccurs="
1" maxOccurs="1"/>
[root@bjx4 ~]# more /usrfile/OPA/DataSourceConnector/bin/..\conf\configuration.xsd
/usrfile/OPA/DataSourceConnector/bin/..confconfiguration.xsd: No such file or directory
[root@bjx4 ~]# cls
-bash: cls: command not found
[root@bjx4 ~]# clear
[root@bjx4 ~]# more /usrfile/OPA/DataSourceConnector/bin/..\conf\configuration.xsd
/usrfile/OPA/DataSourceConnector/bin/..confconfiguration.xsd: No such file or directory
[root@bjx4 ~]# more /usrfile/OPA/DataSourceConnector/bin/../conf/configuration.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://oracle.com/determinations/connector/data-source" targetNamespace="http://oracle.com/determinations/connector/data-source" elementF
ormDefault="qualified" version="10.0.0:20091013" xml:lang="en">
<xsd:element name="configuration" type="configuration-type"/>
<xsd:complexType name="configuration-type">
<xsd:sequence>
<xsd:element name="threads" type="threads-type" minOccurs="0" maxOccurs="1"/>
<xsd:element name="run-limit" type="run-limit-type" minOccurs="0" maxOccurs="1"/>
<xsd:element name="time-out" type="time-out-type" minOccurs="0" maxOccurs="1"/>
<xsd:element name="unknown-value" type="unknown-type" minOccurs="0" maxOccurs="1"/>
<xsd:element name="uncertain-value" type="uncertain-type" minOccurs="0" maxOccurs="1"/>

<xsd:element name="data-sources" type="data-sources-type" minOccurs="1" maxOccurs="1"/>
<xsd:element name="data-mappings" type="data-mappings-type" minOccurs="1" maxOccurs="1"/>
<xsd:element name="output" type="output-type" minOccurs="1" maxOccurs="1"/>
</xsd:sequence>
</xsd:complexType>

<xsd:complexType name="threads-type">
<xsd:attribute name="value" type="xsd:integer" use="required">
</xsd:attribute>
</xsd:complexType>

<xsd:complexType name="run-limit-type">
<xsd:attribute name="value" type="xsd:integer" use="required">
</xsd:attribute>
</xsd:complexType>

<xsd:complexType name="time-out-type">
<xsd:attribute name="value" type="xsd:integer" use="required">
</xsd:attribute>
</xsd:complexType>

<xsd:complexType name="unknown-type">
<xsd:attribute name="value" type="xsd:string" use="required">
</xsd:attribute>
</xsd:complexType>

<xsd:complexType name="uncertain-type">
<xsd:attribute name="value" type="xsd:string" use="required">
</xsd:attribute>
</xsd:complexType>
More(24%)
Please help to resolve this problem, any suggestion is appreciate.

We have confirmed this as a limitation in the current version 10.2.0 of the software, and earlier versions. We will provide more information on the timing and availability of a fix in the future.

OPA data source connector

Hi ,
We are planning to make use of OPA data source connector for one of our project requirements.Please let me know if anyone has worked on it and has the relevant material.As far as I understand the data source connector processes the excel or csv files and gives the output for each record in the file applying the rulebase which then can be processed as per requirement (In our case we will be loading it in siebel )
Regards,
Mayuresh

What is the "relevant material" you are looking for? There's an example that comes with both the Java and .NET media packs - see the "examples/data-source-connector" folder. There's also a "Data Source Connector" section in the Oracle Policy Automation Developer Help (included in the media pack in the "help/run" folder) that describes the configuration file and the provided example.

How to findout the data source information for the perticular tables

Hi,
Can you please tell me the process to findout the data source information for the perticular tables .
For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
Thanks.

Hi,
Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
I have searched in help.sap.com but I didn't find any information on this .
Please let me know is there any way to know the data source details for SAP Tables.
Thanks

Trillium Software Data quality Tool integration

Hello,
We are going to iinterface in a proof of concept environment a data quality tool with a SAP CRM 4.0.
The data quality tool is coming from Trillium software and is certified by SAP.
I don't find help and documents concerning the interface between SAP and Trillium.
could you give some information or example of implementation.
Thanks in advance,
Christophe

Hallo,
all our certified third party interface integrations can be found in a directory www.sap.com/softwarepartnerdir
You can found the certifications of Trillium here http://www50.sap.com/softwarepartnerdir/companyname/company.asp?partnerid=22058
We don't provide more details, therefore we ask you to contact the vendor directly for more infos.
Best regards,
Katarina Fischer
SAP Integration & Certification Center

Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
ERROR
Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
STEPS
The issue can be reproduced at will with the following steps:
1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
2) Created dnd.param file in SIebel server SDQCOnnector folder.
3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
6) Configured the Siebel components for EDQ integration.
7) Realtime EDQ jobs are running.
8) Create a new Account
Env details are
On : 8.2.2.14 [IP2014] version, Client Functionality
EDQ 11.1.1.7.4
IBM JDK 1.7 32 bit
Using Open UI
Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
Regards
Monoj Dey
9007554589

Hi Monoj,
A few questions:
- What OS is Siebel running on?
- What version of the Siebel connector are you using?
- Which libdnd.so file are you using?
- What's the contents of your dnd.parms file?
thanks,
Nick

Trillium Data quality connector for SAP

Similar Messages

Maybe you are looking for