Trim and make tranformation

I have a photo in which it appears flowers and I want that a flower rises single and floats in the air and the it be fused in a ray sun.
I put the photo in track 1, then I supposed I have to trim the flower and copy it a another layer (track 2?) to be able to apply transformations to him.
¿How can I trim the flower and then copy it in a empty layer?
Then, ¿How can I do to make the flower ises single and floats in the air?
Please..

Sounds like you need to animate the top layer.
Try here:
http://discussions.apple.com/click.jspa?searchID=9015392&messageID=5589369
Al

Similar Messages

I am using photos . I add a camera and make my photos slide in. How do I add a second behavior to the photo to make it slide out. I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

I am using photos in Motion 5. I add a camera and make my photo slide in. How do i add a second behavior to the photo to make it slide out? I want the photo to hold for a few seconds in between sliding in and sliding out. When I am trying to do this I am not getting the photo to hold, i am making one continuous motion which I do not want.
Thanks

Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

OSX 10.7, SSDs, TRIM, and so on...

Okay, so I have played with Windows 7 Home Premium on this wonderful little Booklet 3g for some time now. I hate it.
I am a Mac guy, through and through, and this will never change.
I have been running both Linux Mint 11 and Ubuntu 11.04 for the past two weeks and love them on the Booklet 3g, but the same ugly moster rears its head at every turn - the GMA 500 chip. What a lame and disappointing choice!
I found a Poulsbo driver for Ubuntu that *sort of* works (anecdoatal information - I have yet to try it) and a terminal apt-get command to (I think) install the same exact file in Mint 11. It works, but the cursor flickers non-stop and a lot of the tasty features of the GMA 500 are still locked out. At least the resolution is correct and looks great. Nice!
So, the main problems with putting on my retail Mac OSX disc (purchased just for such a project) was that the GMA 500 is not supported at all and there is NO SOUND - in OR out! This is a deal breaker for me as I am a musician and use Finale as my killer app. I MUST have working sound.
So no OSx86 foolishness (ahem - testing) for this Booklet right now.
However, Lion is WAY faster than anything ever in the line of OSX versions, AND it now has TRIM support for all Macs. (Recent versions of Snow Leopard have had it for MacBook pros that have the SSD option.)
With Lion being so cool (multitouch wonders and TRIM) and so fast, the idea of upgrading my Nokia with a decent SSD is now very attractive. And I may reinstall Win7HP, but will probably just stay with Linux Mint 11. If the OSx86 community manages to figure out Lion for this computer I might go that route as well as I would love to make this more comfortable and familiar to me if I am to use it a lot on the road as a Finale box.
Questions (after all that - sorry!):
If I am to use something OTHER THAN WINDOWS as my OS (the most likely scenario for thus netbook) which SSD would be the best choice for me? Does this even matter? I do not know if Mint has TRIM support, but Lion does for certain. Will that affect my choices?
With the plethora of Linux distros out today, which one seems to work best with this hardware setup? Joli OS (formerly JoliCloud) supports GMA 500 BEAUTIFULLY but is not a full OS. In my experience you have to have a connection even to get to the desktop. It is not cloud-based as they claim, but cloud-centric. If you are offline it is useless, or so my experiences have been. I HOPE this is incorrect as I really like the Joli OS quite a lot. Mint is do-able with tweaks for the GMA 500. Eveything else *just works* as it should. I like it. Any reason to change?
TRIM support is really needed isn't it? I do not fully understand it, but am stoked that the Mac OS now comes with it. Now I can try SSDs in my new iMac 27" i5 (it has the capability but is probably not fun to install. I will have to see about this.
Thanks for reading this rambling post. I have a lot of great ideas for this netbook, but because of the GMA 500 chip it seems like a lot of interest has waned. Shame about the RAM, too. What an idiotic idea. Oh, and the PATA/SATA bridge. Oh, dear. Maybe I need to sell this thing after all... ;-)
the elephant
mississippi, usa

In practicality you can't. You can set the preference in the Privacy pane of the Safari preferences to ask websites not to track you, but I don't believe Google honors that setting, and they most certainly store all sorts of cookies which you probably will get even if you set Safari to block all cookies since web programmers have ways around those blocks. All you can do is delete the cookies and other junk on a regular basis. Many cookies hide, so I use Cookie from SweetP productions which does a good job of deleting most if not all of the cruft web sites leave.
Regards.
Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Discussions. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. Contestants have been briefed on some questions before the show. No animals were harmed in the making of this post.

Change color for trim and registration mark

The trim and registration marks are having the color name "All" in the generated pdf from InDesign. Any one help me out on how to change the color to K (black) while generating PDF out of InDesign.

JohnAD77 wrote:
Is it possible to make to 4/c to 1/c (black 100%) while generating PDF itself without adding marks in the document?
Maybe, in CS6, by exporting to Grayscale, but this will make everything black ink only. Otherwise, no.
To add your own marks, add a slug area to the file, draw whatever you want for marks in that area, using [Black], and turn off automatic marks in the export dialog, but Include Slug Area under the bleed settings.

Trim and bleed marks

I created my file in Photoshop but then I had to transfer it to Illustrator to create trim and bleed marks. I managed to add crop marks by creating a rectangle, placing it in the middle of my picture and selecting object/crop area/create.
However, when I try converting my file to PDF, none of my marks can be seen. I also tried setting everything up in print dialog box but nothing works. I am creating a file for commercial printing. I am using Photoshop and Illustrator CS3. I really need help with this. Any ideas on how to solve it would be great!!!
Thank you!

Thanks. I did try it the other way as well, but then my crop marks show out of artboard for some reason and I need to adjust them manually, hence changing the trim size, which I don't want. If I don't adjust them to appear on artboard then they don't show in PDF. That happens when I use the rectangle in trim size.
However, when I only use the command that you mentioned without creating a rectangle first then my crop marks show in the middle of my artboard, in other words, if it was to be trimmed to the right size, the crop marks would be seen on the printout after trimming. I hope this makes sense, but I've been trying to do this for two days now and I am losing my mind.

SSD Trim and recovery software

I have a crucial MX100 512G ssd and I know the windows 10 SSD optimize tool is SSD trim. However, after I ran the SSD optimization showing 100% trimmed, I noticed the trim didn't work because I could still recover my deleted files via data recovery software ( such as disk drill and others). Does it mean TRIM function will not wipe the block unless I do secure erase on the SSD, and people can still recover their deleted files even the SSD has TRIM function? I thought if SSD has TRIM, deleted data could not be recovered. ( I even left the computer idle over night, and I could still recover the files I deleted).

dummykid, have you checked files integrity after the recovery? That is, for example, if you have recovered .jpg file with a photo were the photo viewable?
The main function of TRIM is not to make data unrecoverable. Making data unrecoverable is a side effect of TRIM, one could say.
When a file is deleted from the drive the space it used to occupy should be TRIMmed and usually it occurs very fast. Recovery tools however, can still usually find the file with its name and attributes (size). This is because some data about old/deleted files can still be left in MFT (master file table) area.
When you delete data from the drive TRIM sends information to the SSD controller to help it clear the corresponding NAND parts. But I belive that the MFT works the same way with or without TRIM, that is it still stores some data related to deleted files, like name and size. But it is file content you really want to recover, not the file name and attributes only. Recovery tool will find the name and attributes of the file and it will recreate that file with the data taken from the drive, but the data itself can be completely different from the original or even empty. Check that out!
On my SSD I can 'recover' many photos (.jpg files) but they are unreadable, some of them have some random data and some have no data inside.

"Trims and/or chapters adjusted" message

Today when checking an Encore project I received the "trims and/or chapters adjusted" message. The same project had checked out okay yesterday, and let me build a DVD folder with no complaint. The DVD played fine, but then I decided I wanted to change one of the menus slightly, by replacing a replacement layer with a new image. Now I get the message every time I check the project.
I looked at the location of the chapter markers and indeed they had moved a bit from where I had set them, probably to the nearest I-frame. I relocated a couple of chapter points and relinked the menus, so as to avoid any risk of having a chapter begin before the last chapter ends. I still got the above message when I checked the project.
Finally I re-ran the DVD build, this time much quicker because the timeline assets had already been encoded. The DVD appears to play exactly as intended.
What am I to make of the "trims and/or chapters adjusted" message>
Dick V.

Just ignore it.
It is a message telling you what you have done, and not an error.

Move up one level in path and make new folder

How do I get applescript to make a new folder one level up from myFolder i.e.
set myFolder to ¬
(choose folder with prompt "Where are the image files for which you want to change exif data ?") as reference
make new folder at myFolder with properties {name:"Gallery JPEGs"}
makes a new folder inside myFolder, but how do I tell it to move up one level from myFolder and make a new folder?
Thanks.
Pedro

You can use statements such as the following ones:
*tell application "Finder" to make new folder at container of myFolder with properties {name:"Gallery JPEGs"}*
or
*tell application "Finder" to make new folder at container of container of myFolder with properties {name:"Gallery JPEGs"}*
and so on…
And if you want the folder “myFolder” to be contained by the folder “Gallery JPEGs”, use the following statements:
*tell application "Finder"*
*make new folder at container of myFolder with properties {name:"Gallery JPEGs"}*
*move myFolder to the result*
*end tell*
Message was edited by: Pierre L.

I have a new pc, and when updating ipad software it will erase all apps etc, is there any way to stop this from happening and make my new laptop my ipads "home" pc???

I have a new laptop, and have copied over my existing itunes libary, but when i connect my ipad, and go to update the software to the new version it warns me that it will wipe all my apps etc..... How can i stop this from happening and make my new laptop the "home" for my ipad??
Any help gratefully received! :-)

Macs use an application called Migration Assistant to copy material from the old Mac to the new one. The macs are connected together and each runs Migration Assistance and the user chooses what stuf to copy onto the new Mac.
Unfortunately I do not know how to do this between pcs or between a Mac and a Pf or even if it's even possible.

How do I install a language XPI globally and make it the default language?

I am using Firefox on unices and various Linux distributions (the less common ones). Installing Firefox is easy, but it is always in English. I get most of my interfaces (gnome, libreoffice, gimp, etc) in my preferred translation simply by setting the proper locale (export LANG=xy_XY.UTF-8) before starting Xorg. I found and downloaded my preferred language pack for firefox, which comes in an XPI archive. Opening that XPI file in Firefox (via an URL of file:///path/to/file/langpack.xpi) works smoothly, the translation gets installed under the user's own profile and it shows up in the add-ons (under the new category: Languages). Unfortunately, I still see no way in Firefox preferences to set this added translation as the default. Firefox still starts with the English interface. On SeaMonkey, there is a combobox on the Appearance panel that allows me to select the language of the interface from the list of installed/available languages. I cannot find such option on the panels of Firefox. So far, I had to install a language-changer add-on to be able to set the interface to my native locale. Even though my users never need to switch to any other locales.
Q1., Once a language xpi is installed, how do I set the interface to use that language?
Q2., How do I install the language xpi and make it the system-wide default, so that all my users see Firefox starting with the native (non-English) interface?
I found a handful of description for Q2, but they appear to be outdated and do not work. These include the -install-global-extension argument to Firefox, placing the xpi file as it was downloaded into the "extensions" folder, placing the xpi file renamed to the extension ID into the "extensions" folder, unzipping the contents of the xpi into a subfolder of the "extensions" folder named as the extension ID. Please note, these attempts might have failed because I placed the extension NOT where it was supposed to go. The instructions refer to the global extension folder as <installation folder>/extensions, but on my system no such folder exists. Firefox seems to get installed into /usr/local/lib/firefox and there is no "extensions" subfolder there in. However, there is a "browser/extensions" subfolder, but placing my XPI there did not trigger any effect. Also, I manually created the "extensions" subfolder in /usr/local/lib/firefox and moved the xpi there (on various names, unzipped and in a whole) without the expected result.
Any suggestion is very much appreciated!
My goal is to install the firefox package, then run something from the command line resulting the non-English translation in the downloaded XPI becoming the system-wide default for all users. A step forward would be to know for certain where that "extensions" folder must be on my specific OS. How do I query that?

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

Unable to Log and Capture AND make FCP a boot disk

I am unable to go into Log and Capture mode in FCP 4. I can capture from firewire using I movie just fine so I know the sytem works. The minute I open Log and Capture from within FCP (with the JVC Mini-DV camera hooked up thru Firewire), it crashes. Help. I upgraded from FCP 3 to FCP 4 a couple years ago and it hasn't worked right since. Would re-installing the FCP 4 upgrade work? Also, my system works very sluggish. Please explain to me how I would make the veersion of FCP 4 my boot disk. I realize that I can't have the FCP 4 application and the media on the same drive but is there a way to partition one of my drives and make FCP one of the startup disks? Hope this isn't too confusing. Thanks.

First off, FCP 4 was darn unstable. FCP 4.5 is a free upgrade and is STILL the most stable version out there. FCP 5 is getting there.
Secondly, try:
Shane's Stock Tip Mantra: If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://fcprescue.andersholck.com/ and run it.
2) Open the Disk Utility and Repair Permissions.
As for partitioning the hard drive, that isn't necessary. Hasn't been since FCP 3.
Shane

How do you sync voice memos and make CD's of them?

How do you sync voice memos and make CD's of them?

When you sync the phone with your computer voice memos are copied to your iTunes library with the Genre "Voice memo".
To burn to CD you do it the same way you would any music; create a playlist of the memo(s), the right click on the playlist and choose "burn to CD".

How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?

How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?
In the past I would simply place a copy of the document on my scanner, then selected create PDF from scanner. However, there is now no create PDF from scanner alternative, option or choice. The only option available is selected file to convert to PDF. what am I to do?

That would have been a function of your scanning software. Adobe Reader is only used to view the pdf that your scanning software created.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Trim and make tranformation

Similar Messages

Maybe you are looking for