Trim command doesn't work fix

I downloaded PE 11 and PE12 and my trim command will not work for me at all. I use this so much and can't even use either one. I had 12 and went back to 11 and it still doesn't work. It is so hard to get help now from Adobe. I need this command to work. Is there a fix I can download

Nancy K Lindway wrote:
I downloaded PE 11 and PE12 and my trim command will not work for me at all. I use this so much and can't even use either one. I had 12 and went back to 11 and it still doesn't work. It is so hard to get help now from Adobe. I need this command to work. Is there a fix I can download
Have you tried to reset the tools to see if corrects itself? To do this, launch a blank image in Editor under Expert mode tab. then at the bottom look for something like this (you will need to click on the image to magnify it):
The reset button is at the red box shown on the right-side of the picture. You need to click on the arrow icon to reach it. You can reset all tools or reset only the selected tool. I would reset all tools and done with it.
This might or might not fix it but worth a try.
Good luck.

Similar Messages

Safari 6.0 command- doesn't work

Command+ works fine but command- doesn't work. I'm running 10.7.5

Just add the following to the file com.apple.WebProcess.sb.
Please add it below the Basic system paths and above the FIXME: or System and user preferences:
;; Plugins
(subpath "/Library/Internet Plug-Ins")
(home-subpath "/Library/Internet Plug-Ins")
And it's fixed!

Visually handicap, needs to increase font size in logic pro, Command doesn't work

Hi,
I'm visually handicapped, and new to logic-pro. I'm having a miserable time reading the internal logic-pro fonts. Command + doesn't work, and I can't find any preferrence or settings options that affect the default font sizes, any ideas?

Unfortunately you cannot change the font size of the main fonts in Logic...
However, there are a couple of other settings you may not be aware of...
1) Under Logic Pro's preferences... go to Display
Now you can change the size of the playhead and Local Windows under the General Tab
You can increase the size of the Logic plugin windows/fonts sizes under the Mixer Tab (I have mine set to 200%)
Note: This setting does not apply to 3rd party plugins.. only Logic's own plugins...
Under the Piano Roll tab you can change the size of Bar/Beats/Division Lines...
2) Using the screen zoom command... Hold down control and scroll on your mouse... will zoom in the screen...
Note: as you are using Mountain Lion there is also a new setting under System Preferences/Accessability
Choose Zoom on the left hand side
Now choose Zoom Style/Picture in Picture and instead of a full screen zoom it provides you with a magnifying glass of sorts to just magnify the area arund your mouse pointer. I find this setting very useful....
Hope this helps...

HT1338 Safari Hide command doesn't work

Now my Safari 6.0 "Hide Safari" command doesn't work (whether clicking the command-H or going up under the Safari menu and down to the Hide Safari command.
Any suggestions anyone? I am about one more issue away from abandoning Safari altogether and just using Chrome and Firefox.

I've made a number of iWeb websites. I notice that I can't "Command +" the text larger or smaller. Is this a function of an iWeb site .. or is there something I'm missing?
What browser are you talking about? If Safari, is it the same with the other major browsers (Firefox and Opera)? Could you provide the url of an example?

Bash command doesn't work after update

I just ran pacman -Syu as normal, but some got many errors like below:
( 3/11) upgrading binutils
error: command failed to execute correctly
and every package except kernel-headers got a error message like that. and then i found most of my bash command doesn't work any more, just like ls and vim. However, some others like pwd and cd still work correctly.
Any one any ideal?
Last edited by ranjiao (2009-11-12 13:26:01)

ranjiao wrote:I removed /lib64 and make a soft link from /lib64 to /lib, as Matlab09 requires a /lib64 containing crt libs.
is this the cause?
Yes.
I've done that before and got into the same problem when updating glibc, the lesson here, don't mess with the default directory structure.

Unhide library command doesn't work

Unhide library command doesn't work in terminal

Open the Terminal application in your Utilities and paste the following at the prompt:
sudo chflags nohidden ~/Library
Press RETURN. Enter your admin password when prompted. It will not be echoed.
The "sudo" may not even be required, but if it is and you don't use it, then you'll get an error message. Just try again using the above command.

Layer trimming shortcut doesn't work

Hi, I'm beginner but..
I don't understand what I do wrong but layer trimming shortcut doesn't work.
"option+[ or ]"
I use sweden keyboard, macpro and After effects cc
Tnx

English( north america )
tnx

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

This any help?
http://support.apple.com/kb/HT1526

Restart command doesn't work

I believe the following problem began when I updated to 10.4.9. I can't be absolutely sure but the timing seems about right. I've since updated to 10.4.10 in an effort to fix it, but haven't succeeded.
The problem is that when I select the Restart command in the Apple menu the computer will begin the process, all open apps will be quit, the finder will quit, my desktop will go to blue to a few seconds. Then the monitor will go blank. Then nothing after that. I DO NOT get the startup chime. The machine is still powered on, the light above the power button is still lit. If I leave the machine for any length of time the fans will start speeding up gradually until they're at full tilt. After 4 or 5 minutes it becomes obvious that nothing is going to happen, so I need to manually shutdown via the power button.
Does anyone know what logs I can post here to help in the diagnosis? This also happens if any installer application needs to perform a restart, ie Software Update.
Thanks,
Chris

Hi chris catalano-
I have had updates make my machine do some crazy stuff just as you describe. I would actually let it go for 15 or 20 minutes before declaring it a no-go.
If that doesn't work, try resetting the SMU and see if that helps: How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)
Luck-
-DaddyPaycheck

Find command doesn't work

The find command F or just Find doesn't work any ideas on fixes? I tried trashing kybrd and finder prefs. This is on a G3 running 9.2
Thanks

Hi, Bookalaka -
If Sherlock, or an alias to it, is not in the Apple Menu Items folder (in System Folder), then the Find function (Command-F) will not work. If that is the case, replace that item - move either Sherlock itself, or place an alias to it, into the Apple Menu Items folder.
Note - if you use Internet Explorer, and want to be able to use the supplemental toolbar icon for Sherlock, then Sherlock itself must be placed in the Apple Menu Items folder (IE does not recognize an alias to it).
If for some reason you are missing Sherlock completely, you can replace it fairly easily. Look in the System Folder on any OS 9.1 or later Install CD; you'll find it in the Apple Menu Items folder. Just copy it to your hard drive.

[SOLVED] openbox menu command doesn't work with &&

I'm now using openbox-session only.
I'd like to run a program after something was done correctly:
zenity --question && killall openbox
I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
However, the previous command "zenity" is run only.
In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
<item label="Exit">
<action name="Execute">
<execute>
zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
</execute>
</action>
</item>
Please, give me any idea. Thank you.
Last edited by mairoo (2009-09-09 10:06:17)

hbekel wrote:
You'll need to use a shell explicitly:
<execute>
sh -c 'command1 && command2'
</execute>
I flagged "solved" thanks to your help. It works good. Thank you.

[SOLVED] [LVM over LUKS] TRIM forwarding doesn't work

Recently I encrypted my SSD using LUKS and created three LVM volumes on top of it. Then I added "allow-discards" to the list of kernel parameters, here is the respective entry from grub.cfg:
linux /vmlinuz-linux root=/dev/mapper/vgarch-root ro cryptdevice=/dev/sda2:vgarch:allow-discards cryptkey=/dev/disk/by-uuid/02F2-CDB8:vfat:/lukskey quiet logo.nologo loglevel=3 console=tty1 splash=silent,theme:arch-elegant elevator=noop transparent_hugepage=never radeon.modeset=1
And an excerpt from fstab:
/dev/mapper/vgarch-root / ext4 defaults,auto,noatime,discard 0 1
UUID=e8ba294e-9621-422d-8f40-d9ffbc715484 /boot ext2 defaults 0 2
/dev/mapper/vgarch-var /var ext4 defaults,auto,noatime,discard 0 2
/dev/mapper/vgarch-home /home ext4 defaults,auto,noatime,discard 0 2
When the system is booting up, "encrypt" hook prints the appropriate message ("Enabling TRIM/discard support."), so everything seems to work fine. But when I check for TRIM support using the following method, the last command doesn't print zeroes as expected.
[root@archhost /]# dd if=/dev/urandom of=tempfile count=100 bs=512k oflag=direct
100+0 records in
100+0 records out
52428800 bytes (52 MB) copied, 5.66872 s, 9.2 MB/s
[root@archhost /]# hdparm --fibmap tempfile
tempfile:
filesystem blocksize 4096, begins at LBA 0; assuming 512 byte sectors.
byte_offset begin_LBA end_LBA sectors
0 13969408 13970431 1024
524288 13986816 13987839 1024
1048576 14026752 14127103 100352
[root@archhost /]# hdparm --read-sector 13969408 /dev/sda
/dev/sda:
reading sector 13969408: succeeded
bc43 41aa 82eb 4200 438a 6151 cbbd 0842
4014 cfa4 17e7 b2ca 7c92 ec35 9fe3 0089
206c beba c33d 5876 89e7 0d9c 1fc7 b122
801e bdb9 82af 8885 add9 7b17 7aa4 4c69
d4c1 da55 2029 bd05 d0f0 cd22 a944 b27b
ffa7 9c29 ad4a 9292 7f3a 9e4d 9040 f135
f507 3d8b c142 6ac2 da83 167a c40e 1be4
2c58 f7b6 fb50 2ce7 c7d2 6f70 ce45 be87
bfe4 2755 4795 10ee e1e1 1362 d078 a8ac
0754 8663 6881 12e4 fe8c c1c1 795f 7617
0423 1abf eade 31d1 4bfc e7a0 5fbc 36cd
af25 febe 374a bef1 eb3b 2b73 df5c a5fe
9dc3 d5e9 e31c 97ec 35ca 4002 4beb 0917
2d72 d0e3 f0ab 8d75 0fcf ce97 500f e869
875b 7866 1528 7148 99d0 6369 3369 a639
cb39 f552 a277 62c3 1ba8 bdb3 4127 a6ca
5cdd d934 5f5b a434 a20e 980c 7bfd 6f40
7029 d9aa 294f 321e 4eab 8130 adf3 140a
5352 328b 6713 25ac c37a d33a 2be9 3699
459c fc7a 1b10 7e99 8b74 cc60 e5b9 3a85
edbb 7baf 2205 34a4 c10e 6d79 1e44 239f
dad3 ee10 b76f 76fa 569c 3b73 81e0 0848
db89 4efd c520 163e af72 b83b ff3b a924
d2f1 120d 75df f7ae 3922 1b2a ee39 5efd
3ade 6a0e f24e f14d 7444 d7b6 3c3a 5ab6
2345 420d e9a4 1811 807e 9c29 5da3 f9a0
f7cb ba53 b3f1 69c4 b76d fa9d 6a0a 0184
a69c fe16 42d9 71a9 85b9 1b01 8870 40b1
585a c191 a101 39b4 2203 b662 2a17 50fc
93ac 3a2d 2b27 22f4 ff60 f7d1 fd59 feda
1477 c56f 816a 0199 34b7 ba4c 4950 6af8
b7bf c409 d48a e701 2894 1be1 3ac9 d4b1
[root@archhost /]# rm tempfile
[root@archhost /]# sync
[root@archhost /]# hdparm --read-sector 13969408 /dev/sda
/dev/sda:
reading sector 13969408: succeeded
bc43 41aa 82eb 4200 438a 6151 cbbd 0842
4014 cfa4 17e7 b2ca 7c92 ec35 9fe3 0089
206c beba c33d 5876 89e7 0d9c 1fc7 b122
801e bdb9 82af 8885 add9 7b17 7aa4 4c69
d4c1 da55 2029 bd05 d0f0 cd22 a944 b27b
ffa7 9c29 ad4a 9292 7f3a 9e4d 9040 f135
f507 3d8b c142 6ac2 da83 167a c40e 1be4
2c58 f7b6 fb50 2ce7 c7d2 6f70 ce45 be87
bfe4 2755 4795 10ee e1e1 1362 d078 a8ac
0754 8663 6881 12e4 fe8c c1c1 795f 7617
0423 1abf eade 31d1 4bfc e7a0 5fbc 36cd
af25 febe 374a bef1 eb3b 2b73 df5c a5fe
9dc3 d5e9 e31c 97ec 35ca 4002 4beb 0917
2d72 d0e3 f0ab 8d75 0fcf ce97 500f e869
875b 7866 1528 7148 99d0 6369 3369 a639
cb39 f552 a277 62c3 1ba8 bdb3 4127 a6ca
5cdd d934 5f5b a434 a20e 980c 7bfd 6f40
7029 d9aa 294f 321e 4eab 8130 adf3 140a
5352 328b 6713 25ac c37a d33a 2be9 3699
459c fc7a 1b10 7e99 8b74 cc60 e5b9 3a85
edbb 7baf 2205 34a4 c10e 6d79 1e44 239f
dad3 ee10 b76f 76fa 569c 3b73 81e0 0848
db89 4efd c520 163e af72 b83b ff3b a924
d2f1 120d 75df f7ae 3922 1b2a ee39 5efd
3ade 6a0e f24e f14d 7444 d7b6 3c3a 5ab6
2345 420d e9a4 1811 807e 9c29 5da3 f9a0
f7cb ba53 b3f1 69c4 b76d fa9d 6a0a 0184
a69c fe16 42d9 71a9 85b9 1b01 8870 40b1
585a c191 a101 39b4 2203 b662 2a17 50fc
93ac 3a2d 2b27 22f4 ff60 f7d1 fd59 feda
1477 c56f 816a 0199 34b7 ba4c 4950 6af8
b7bf c409 d48a e701 2894 1be1 3ac9 d4b1
Is it possible at all to enable TRIM support in this case? And if yes, what did I miss?
Last edited by Atragor (2012-07-01 19:19:14)

Good, my guess then would be that your trim is working already and you should be able to invoke it also with fstrim manually to get a positive confirmation in bash.
The reason you don't see the zeros in your check should be that the hdparm reports back the wrong starting sector of the file due to offsets. See here for a thorough explanation by the developer and here another summary.

Unix Command doesn't work in Tiger

Hi,
I've got labs of eMacs that I'm finally upgrading to Tiger. My image seems to work fine, but I'm running into a weird quirk with my "Send Unix" commands via ARD. We're doing NWEA testing and LOVE the unix commands because we can login to machines, turn on TestTaker, login to TestTaker, and select the correct test (math or reading) and the right version of the test.
The script below works fine on a panther eMac.
osascript
tell application "System Events"
keystroke "1" using command down
delay 3.0
keystroke ASCII character 31
delay 2.0
keystroke return
keystroke "n" using command down
end tell
On my Tiger machines, the command stops on the:
"Keystroke ASCII character 31" line (this should arrow down to next test version).
A report window comes up in ARD with this error message:
86:104: execution error: System Events got an error: 31 doesn't understand the ASCII character message. (-1708)
This used to work perfectly, but now I can't get ASCII 31 (or arrow down to work). The real killer is that other techs in my school district have eMacs running tiger with same commands that work (some have to arrow down 16 times to get to correct test version). The other commands (like command 1 and returns, command n) all work fine! Hate to have to touch 80 machines each day to select proper test version when we log in.
Any Suggestions????

Try this form of the line:
keystroke (ASCII character of 31)
That's worked for some people. Hope it works for you. If it doesn't work as given, try without the parentheses.
Regards.

EA2 : describe command doesn't work

Hello,
The command describe (F4 ou right click + describe) doesn't work with the sql developer ea2 version.

Note that there is a difference between v$session and v_$session.
Running as a user with DBA role against 9.2.0.8,10.1.0.5 and 10.2.0.2 gives identical results
F4 on v$session gives empty results. The results windows is headed v_$session.
F4 on v_$session gives No object found: v_$session.
F4 on sys.v_$session gives No object found: sys.v_$session.
desc v$session in a worksheet gives a full listing
desc v_$session in a worksheet gives ERROR: object v_$session doesn not exist.
desc sys.v_$session gives a full listing.
Using SQL Plus gives the same results as the worksheet desc. This is correct. There is no synonym for v_$session so you can't see it without a schema qualifier.
Message was edited by:
smitjb

Sudo trash command doesn't work

Last year I found a Terminal command for emptying large amounts of trash, quickly. Now, using that command doesn't seem to work. Can I be doing something wrong?
I pasted this into Terminal: "sudo rm -rf ~/.Trash/*".
Afterward I typed my password, and Terminal showed a dollar sign and the grey rectangle. But two hours later, none of the trash has been deleted. What is my mistake?

Thanks Niel, but I am using it without the quotes. Could I be doing anything else wrong?
Here's how it looks.
(I only made the command once. The earlier ones were from before I restarted.)

Trim command doesn't work fix

Similar Messages

Maybe you are looking for