Trim Marks Adding Extra Height and Width to Doc

My artboard is 6" x 9" with .125" bleeds on all sides. Trim marks is checked in the pdf export setting. Why does the pdf size go to 7" x 10"? It seems that the trim marks add a good .625" to the doc. Why?
Any help is greatly appreciated. Thanks!

If you don't want marks, don't check that option when saving a PDF.
If the marks are not included in the PDF, then no space will be added for them.
If you want marks... they need to be part of the PDF. And therefore they need to have space to be visible.
I dont' really understand what you're after... Marks that are invisible? Marks that fall outside the visible PDF and simply float in space?

Similar Messages

How to resize and maintain height and width ratio IR image column

Hello, I am upgrading from 3.2 to 4.1 reports that include images in report columns. I have had good success with this except for one thing. If the height and width is fixed it distorts the photos, and if I do not have fixed dimensions the image may be too large depending on the original dimensions of the :P1_PHOTO item which is File Browse... BLOB column. I do not want to restrict users ability to upload large image files, or files with different dimensions, but I want them to display as a thumbnail size proportional to the original dimensions in the report, or maybe I need a different approach? Report region template is No Template. I appreciate any suggestions.
select decode(nvl(dbms_lob.getlength(photo),0),0,null,'<img src="'||apex_util.get_blob_file_src('P1_PHOTO',id)||'" height="75" width="75"/>') photo from table.
I tried using percent i.e.: width="10%" that does not work.
I have tried several variations of <style> in page HTML header to change column width, but the image size does not change.
<style>
td[headers="PHOTO"] {
width:75px;
</style>
<style>
#apexir_PHOTO{width: 75px;}
</style>
Thanks.

Try to go with max-width / max-height. However, if you have IE browser, hang on for pain. For some ideas, some links:
http://wordpress.mfields.org/2011/scaling-images-in-ie8-with-css-max-width/ (ignore object-fit, it is not yet supported on most browser)
http://stackoverflow.com/questions/3915219/max-width-on-img-tag-not-working-in-ie8
etc. Be sure to try out your chosen solution on the target browser(s)!
IE is just nasty :(
What i have done before is not to have my browser scale my images, especially when the images can be large(r) and you expect quite some traffic. All those extra (kilo)bytes won't help it load faster. I just added an extra column in the table, like photo_thumb, and create a scaled version of the uploaded picture when it is being inserted.
For example, i have the following process on my apex page, and i'm using wwv_flow_files.
Have some code:
IF :P3_FIND_PHOTO IS NOT NULL THEN
   DECLARE
     v_id number;
     v_small_photo blob;
     v_large_photo blob;
     v_mime_type apxt_contacts_img.mime_type%type;
     v_content_type apxt_contacts_img.content_type%type;
   BEGIN
      SELECT blob_content a, blob_content b, mime_type, content_type
      INTO v_small_photo, v_large_photo, v_mime_type, v_content_type
      FROM wwv_flow_files
      WHERE name = :P3_FIND_PHOTO;
      IF lower(v_mime_type) NOT IN ('image/jpg', 'image/jpeg') THEN
         raise_application_error(-20001, 'File for upload is not a jpg!');
      END IF;
      -- Rezise the photo so that it is proportionally 125*125
      -- ordimage is an oracle type able to manipulate all sorts of pictures
      ordimage.process(v_small_photo, 'maxScale=125 125');
      -- If contact is of type personnel, then no need to store
      -- a large photo since it wont be displayed
      IF :P3_CONTACT_TYPE_ID = 2 THEN
        v_large_photo := NULL;
      END IF;
      -- Delete previously uploaded picture
      IF :P3_ID IS NOT NULL THEN
         DELETE FROM apxt_contacts_img
          WHERE contact_id = :P3_ID;
      END IF;
      -- Insert the data into the contacts_img table as a
      -- SELECT from WWV_FLOW_FILES
      INSERT INTO apxt_contacts_img
      (contact_id,
       image_name,
       mime_type,
       content_type,
       filename,
       small_photo,
       large_photo)
      VALUES
      (:P3_ID,
       :P3_LASTNAME,
       v_mime_type,
       v_content_type,
       :P3_FIND_PHOTO,
       v_small_photo,
       v_large_photo);
      -- Remove the image from the apex wwv_flows_files table
      DELETE FROM wwv_flow_files WHERE name = :P3_FIND_PHOTO;
   END;
END IF;

How to create instant quote tool for website? Customer enters height and width and price is calculated.

I am trying to create a instant quote tool for my site.. so customer type in there height and width and a price appears but I have no clue where to start.. is there any tutorial or would someone kindly give me some advice on how to do this on dreamweaver. I havent used Dreamweaver in years and I cant even remember anything now
Kind Regards

Well this is what I have soo far.. so I want to enter the height /width then if they want to add extras such as fixing options and cut out it will add to the product price ????
<!doctype html>
<html>
<head>
<div class="summary entry-summary">
        <h1 itemprop="name" class="product_title entry-title">Ral 1000</h1><div itemprop="offers" itemscope itemtype="http://schema.org/Offer">
    <meta itemprop="price" content="160" />
    <meta itemprop="priceCurrency" content="GBP" />
    <link itemprop="availability" href="http://schema.org/InStock" />
</div><div itemprop="description">
    <script src="https://apis.google.com/js/plusone.js" type="text/javascript">
</script>
<script type="text/javascript">gapi.plusone.go();</script>
<p>6mm, low iron, toughened glass, PAR
</div>
<div class="shortcode-google-plusone"><div class="g-plusone" data-size="standard" data-annotation="none"></div></div>
</p>
</div>
<form class="cart" method="post" enctype='multipart/form-data'>
        <table id="price_calculator" class="simple_price_calculator">
        <tr>
        <td style="text-align:right;">
          </td>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script>
$(document).ready(function() {
$('#width').keyup(function() {
var height = $('#height').val();
var width = $('#width').val();
var price = (height * width / 1000000 * 325).toFixed(2);;
$('.price').html('Product price: £' + price);
</script>
</head>
<body>
<p><label for="height">Height (mm)</label>
<input type="text" name="height" id="height">
</p>
<p>
<label for="width">Width (mm)</label>
<input type="text" name="width" id="width">
</p>
<p>
</p>
</body>
</html>
    </tr>
</table>
<div class=" product-addon product-addon-add-fixing-option">
            <h3 class="addon-name">Add Fixing Option </h3>
    <p class="form-row form-row-wide addon-wrap-1738-add-fixing-option">
    <select class="addon addon-select" name="addon-1738-add-fixing-option">
                    <option value="">Select an option...</option>
                    <option data-price="5" value="silicone-adhesive-tube" >Silicone Adhesive Tube (<span class="amount">£0.00</span>)</option>
                    <option data-price="5" value="screws-and-drill-holes" >Screws and Drill Holes (<span class="amount">£6.00</span>)</option>
    </select>
</p>
    <div class="clear"></div>
</div><div class=" product-addon product-addon-add-extra-layer-multi-coloured-fine-glitter">
            <h3 class="addon-name">Add Cut Out and Notches </h3>
    <p class="form-row form-row-wide addon-wrap-1738-add-extra-layer-multi-coloured-fine-glitter">
    <select class="addon addon-select" name="addon-1738-add-extra-layer-multi-coloured-fine-glitter">
                    <option value="">Select an option...</option>
                    <option data-price="8" value="1" >1 (<span class="amount">£25.00</span>)</option>
                    <option data-price="15" value="2" >2 (<span class="amount">£50.00</span>)</option>
                    <option data-price="25" value="3" >3 (<span class="amount">£75.00</span>)</option>
                    <option data-price="25" value="4" > (<span class="amount">£100.00</span>)</option>
    </select>
</p>
</p><p class="price">Product Price: £</p>
    <div class="clear"></div>
</div><div id="product-addons-total" data-type="simple" data-price="160"></div>
        <input type="hidden" name="add-to-cart" value="1738" />
        <button type="submit" class="single_add_to_cart_button button alt">Add to cart</button>
            </form>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>

Tree List height and width

I am using a Tree List shared component.
Is there a way for me to control the height and width of the Tree List on my page?
Many thanks,
Mark

I'd forgotten about writing that...
Please write me directly ( [email protected] ); we can discuss what you're trying to develop, and the best ways to accomplish it.

Assigning window height and width programatically

All,
Is it possible to assign window height and width programatically?? ie through editor in SAP scripts.

Hi
Yes you can
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
<b>Reward points for useful Answers</b>
Regards
Anji

What's the height and width of canvas3d

what's the height and width of canvas3d

I do not know if this will fully answer you question but:
1) For a successfully executed Canvas3D, there should be a default size based on the system. If c3d is a Canvas3D object, try System.out.println( c3d ); This will given the Canvas3D object's ID, upper left corner location, and size (plus a possible status indicator whose meaning I do not fully understand). Also, the methods getSize(), getHeight(), getWidth() can be used to get the Canvas3D object's size.
2) You can set the size and location of the Canvas3D object (which then can be added to some container of size W x H, e.g., JPanel) via:
Canvas3D c3d;
c3d.setSize(w, h); // where 0< w <= W and 0 < h <=H are preferred
c3d.setLocation(x, y); // where 0 <= x <= W-w and 0 <= y <= H-h are preferred
Note, the size and location can be set anytime after the Canvas3D object is declared/instantiated.
I hope that the above is helpful.
stmoss

API for Iview to change its propeerties height and width

Hi ,
i need the API for Iview to change its proiperties like height and width and to assign iview to role,
Regards ,
venkat p

Hi,
Check this to set height & Width to Iview:
Setting iView Parameters
To assign iview to role:
Adding a Role To another Roles by program
http://help.sap.com/saphelp_nw2004s/helpdata/en/5f/cf9d4207e1c86ae10000000a155106/frameset.htm
Regards,
Praveen Gudapati

Fancybox iframe in Edge Animate - Not showing correct height and width

Hi All,
Can someone please provide advice or a solution to this issue.
I have been trying to use the Fancybox.js in Edge Animate to call an iframe (as a lightbox pop up).
However when I try this it doesn't show the correct height and width properties - even though I am setting them.
When I test this on my hard drive it works fine in Chrome and Firefox. However when tried online on a test server I get a slim pop up that hasn't set the height properly.
Could this be because the iframe is pre-loading the composition/html page first before setting the size??
Please help
CODE USED:
$.fancybox.open(
type: 'iframe',
autoScale : 'false',
height: '600',
widht: '600',
href : 'website composition link.html',
padding : 0
Other references: http://businessanywhere.biz/blog/2013/03/adding-a-lightbox-to-edge-animate/
Cheers,
Jason

HI Darmendra,
Thank you for your reply to this.
I worked out what the problem was - my external composition that was created Edge Animate was centred both horizontally and vertically.
This was created the problem. When I took this off the fancy box worked well.
Cheers,
Jason

Can I turn off the setting that displays the height and width in a little black box when using the marquee tool?

In Photoshop CC, on a mac...
When using the marquee selection tool, a little black box pops up next to the curser and displays in real time, the height and width of the selection. The same annoying box also appears when dragging an item with the move tool, displaying the numerical location of the cursor. Is there anyway to turn off the display of that little black box? It is driving me bonkers.

Under the preferences cmd/ctrl-k click on "Interface". At the bottom of the UI is a drop down box for show transformation. Set that to "Never"

How to change the height and width of a control?

Dear all,
is there anyway to change the height and width of a control?
In the property nodes, i am just able to read the bound values but cudnt write to it.
How can i set the bound values for a control?
Thanks,
Ritesh

Not all controls can be sized this way. For example to change the vertical size of a simple numeric, you would need to change the font size.
LabVIEW Champion . Do more with less code and in less time .

How to determine height and width of a JScrollPane client

Hi,
I wish to display a webpage in a JScrollPane and wish to determine the height and width of the HTML content so that I can use the information to generate PDF and control the content on each page. Can anybody let me know how I can do this?
Thanks in advance
Prashant Baj

JEditorPane and getSize()?

Dynamically size movieclip to fit text's string height and width

Hello,
I am trying to dynamically size a movieclip to fit the size of a text's string height and width (This text is inside the movieclip)
here is my code so far..
var Font1_ = new Font1();
var Format2:TextFormat = new TextFormat();
Format2.size = 36;
Format2.align = TextFormatAlign.CENTER;
Format2.font = Font1_.fontName;
var MessageBox:MovieClip = new MessageBoxMC();
MessageBox.Text1.defaultTextFormat = Format2;
MessageBox.Text1.embedFonts = true;
MessageBox.Text1.antiAliasType = AntiAliasType.ADVANCED;
MessageBox.Text1.wordWrap = true;
MessageBox.Text1.width = 800;
MessageBox.Text1.height = 400;
MessageBox.Text1.textColor = 0xFFFFFF;
MessageBox.Text1.cacheAsBitmap = true;
MessageBox.Text1.mouseEnabled = false;
MessageBox.Text1.text = String("Use the Arrow Buttons to move");
MessageBox.width = MessageBox.Text1.width;
MessageBox.height = MessageBox.Text1.height;
MessageBox.x = 400;
MessageBox.y = 200;
addChild(MessageBox);
this isn't working for me.. anyone know the best way to do this?
I also want the text to be centered in the movieclip, with a border of around 2-4 pixels
I am also not sure if i should be using text.length? any advice and input is greatly welcomed.
thanks in advance!

Essentially, you need to check for a change in .textWidth or .textHeight, which are different from .width and .height.
This code works for me (assumes a background box called bg and a foreground text instance fg inside a moveclip and an X and Y bounds offset variable to say how far away you want the box from the text and a textFrameNudge to provide a tweak value).
     // Resize background box
     thisBox.bg.x = thisBox.fg.x - boundsOffsetX + textFrameNudge; // I'm using .4 as the tweak value for textFrameNudge
     thisBox.bg.y = thisBox.fg.y - boundsOffsetY;
     thisBox.bg.width = thisBox.fg.textWidth + boundsOffsetX*2 +textFrameNudge*thisBox.fg.getTextFormat().size;
     thisBox.bg.height = thisBox.fg.textHeight + boundsOffsetY*2;

Popup window height and width is not as expected

Hi I am using this peace of code to create a popup. But this popup is not created with
the specified height and width. It is created with a default size. Please tell me how to
rectify the problem?
data:
    l_api_main            type ref to if_wd_view_controller,
    l_cmp_api             type ref to if_wd_component,
    l_window_manager      type ref to if_wd_window_manager,
    l_popup               type ref to if_wd_window.
l_api_main = wd_this->wd_get_api( ).
l_cmp_api = wd_comp_controller->wd_get_api( ).
data: l_i_question type STRING_TABLE,
        l_wa_question type string.
l_wa_question = 'Issue no. xxxxxxxxxxx created succcessfully. '.
append l_wa_question to l_i_question.
l_window_manager = l_cmp_api->get_window_manager( ).
l_popup = l_window_manager->create_popup_to_confirm(
              text                   = l_i_question
              button_kind            = '1'
              message_type           = '1'
             close_button           =
              window_title           = 'Information'
              window_width           = '500'
              window_height          = '500'
l_popup->open( ).

Hi Mainak,
have a look to Thread:
Popup Sizing
As you can see there is not yet a way to set the Popup size.
You have to find the good combination of fields and length in order to get a nice UI.
The WDA engine try to set the best size, help it...
Sergio

Increaseing the height and width of textfield and password fields

Dear friends in apex 4.1 when we create a application it automatically creates a login page
with username and password field in it
So my question is can i increase the height and width of the username and password field in that login page
If it is possible please help.
and also i cannot find the html tag like <input type=text............>
Where to find it?

Hi,
You can easily achieve this using css
<style>
input.myclass
height:100px;
width:100px;
</style>
<input type="test" class="myclass" size="10">So in APEX you have to edit the textfield > HTML Form Eelement Attributes > put class="myclass"
Thanks

How to resize the calendar height and width

Hi,
how to re size the calendar height and width...
Ie i need to fix this calendar region 7 cross 4 format in my page
Regards,
Pavan

If the text exceeds the container, which can happen in a scrollable container where you have to scroll to see some of the text, then the values getContentBounds returns are estimated values. This is because we don't want to force the text to recompose all the way to the end of a very long TextFlow in order to return a value. However, if you want to get the exact amount, and don't mind taking the time to recompose, call textFlow.flowComposer.composeToPosition(), before calling getContentBounds. This forces all the text to recompose to the end, and then getContentBounds will return the fully calculated value instead of estimating.

Trim Marks Adding Extra Height and Width to Doc

Similar Messages

Maybe you are looking for