Trim/Roll Window Question

Hi, all. I would like some help with something Premiere Pro CC related. I can't work out how to get the separate trim/roll window that pops out (the dialogue box) and has detailed information in it like timecode. When I press T, I get the outgoing/incoming frames showing, but I suspect there's a way to get a more detailed dialogue box. Any ideas?

The Trim function is now built into the Program Monitor. It doesn't come in it's own window any more.
In the flyout menu for the Program Monitor, make sure you check Timecode Overlay During Edit.

Similar Messages

How to edit multiple regions in one Piano Roll window

I edit multiple regions in one Piano Roll window at the same time. (It is very handy way of editing especially in huge orchestra projects.)
I can see midi contents of all selected regions in Piano Roll at the same time.
1) But how to choose certain one region of many selected to edit it?
2) And how to edit all at once?
Hope the questions are clear enough.
Thanks.
Dmitriy.
iMac (27-inch, Mid 2011) 2,7 GHz Intel Core i5. 16 GB 1333 MHz DDR3.
OS X 10.10.2

First of all, the Piano Roll has two mechansim, of what it is displaying.
Selected Track: This displays all the Regions that you select in the Tracks Window
One Track: Selecting one Region in the Track Area displays all the Regions of tha tTrack in the Piano Roll. If you select multiple Regions in the Tracks Window, then the last selected Regions counts.
Whatever Regions are now displayed in the Piano Roll Editor can be edited. Select the MIDI Events and apply the command.
You can also apply edits directly to the selected Regions in the Tracks Window.
I explain all those little details in my graphically enhanced manuals ("Logic Pro X - How it Works")
One thing to be clear about:
Tracks Window: Any edit is applied to the selected Regions
Piano Roll Editor: Ay edit is applied to the selected Events
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Final Cut Pro 6.05 Crashes Using Trim Edit Window - RED footage

Hello,
I ingested the RED video through log and transfer using Apple Pro Res 422 as described in the *Using RED Media with Final Cut Studio* document. The ingesting process and rough cutting have gone fine (no more problems than working with SD footage anyway) but FC Pro 6.0.5 crashes consistently (and not gracefully) when I try to use the trim edit window.
The short film is at 22 minutes now, and will finish up around 25 minutes. My source files are on a 1Tb Lacie drive (about 280 Gb free) and I'm working off a second 1Tb Lacie drive (about 200Gb free). Both are connected via Firewire 400. I tried going back to an old SD file to see if trim edit works there and it does.
Questions:
Anyone else having problems with this?
Is my system beefy enough to handle this footage? If not, what suggestions do you have for making it work better?
If I just need to live with it, do you have any suggestions for workarounds?
Thanks and happy new year!
Tom McIntire
http://smilingzombie.com/gs

Thanks Jerry - that makes sense. I wanted to move to a Mac Pro tower for this project but was laid off in June and haven't had much luck finding steady work.
I'm seeing similar issues with Motion - it doesn't crash but it will hang the system up completely. I've been looking for a good reference that will help me determine the best system I can build for the purpose of HD editing and Motion graphics - do you have any recommendations?

Trim Edit Window Dynamic Editing

When I'm in the Trim Edit Window with the Dynamic Editing mode turned on, how can I get both the left and right side of the edit to play simultaneously? I have both sides "activated," meaning I'm in "Roll" mode, not "Ripple" mode. Yet only one side plays! Furthermore, it plays without audio. How do I get audio to play also?
Thanks!

FCP doesn't allow for playback on more than a single window, be it Viewer vs. Canvas in standard layouts, or Outgoing vs Incoming Clip in the Trim Edit Window.
About the audio not playing, is Linked Selection toggled off by any chance? (From the Menubar, check Edit > Linked Selection is checked). If it was, check it, then reselect your edit point(s). If not, post back.

Trim Edit Window Issues

Hi,
Experiencing some trouble with the Trim Edit window. Here's what's happening.
I double click an edit point on the timeline to launch the Trim Edit window. Okay. Sometimes it works fine and I get the outgoing clip on the left and the incoming clip on the right, and when I adjust the edit point, it is reflected in the Out/In Shift indicator at the bottom of each window with a +00:00:03 or -00:00:02 or whatever.
But sometimes I launch the Trim Edit window and both the left and the right windows are black. Sometimes I launch the Trim Window and the incoming clip is correct, but the outgoing clip is cued up wrong, or vice versa. When this is the case, the Out/In Shift counters are also out of whack. For example, an actual adjustment of +2 frames comes out as reading +00:15:03 on the indicator. In addition, sometimes the video clip is correct but the audio that plays comes from somewhere else entirely in the clip. It's pretty frustrating.
Now, to dig a little further, we are importing these clips with a Kona 2 card using the 1080psf 23.98 DVCPro HD codec and cutting on a 23.98 timeline. Some of the audio coming in on the master tapes isn't usable, so we are also importing audio from a back up system. I find the sync clap on the video and line it up with the sync clap on the backup audio. I hilight the video and audio tracks hit Command+L to link them, and then drag into my browser to make a new master clip.
I must be doing something wrong in the linking process, because these Trim Edit window problems seem to only occur with the newly linked clips. But the strange part is that it isn't consistent. Yesterday the Trim Edit wasn't working properly on a particular scene. Today I go back to that scene and the Trim Edit function works fine.
So, after reading this epic post, if anyone has any insight or ideas on how to solve this problem, I'd appreciate it.
Thanks.
Dual 2.5 G5 Mac OS X (10.4.2) 6 GB RAM

hello i have the same problem since june 2005
i'm working for a national broadcast television who produces a sitcom
we use dv camera in progressive mode (panasonic ag-dvx100a Pal)
sound is recording on compactflash card in wave format
and i have to synchronise 2 video tracks (2 cameras shooting simultanely) and one stereo sound track
i put aux tc on the second video and the stereo pair and link them all
I'm working on 2 powerbooks
1. powerbook 1.33Gb with 10.4.4 and quicktime 7.04 andfcp 5.04
2. powerbook 1.5Gb with 10.4.2 and quicktime 7.xx and fcp 5
i use a g-raid 500gb firewire 800 to digitalise the clips
When I use the roll or ripple tool with few tracks selecting I can only work in the timeline.
When I open the "edit trim" window, the application crash down or more oftently the pictures I get in both sides of the window when I move even one frame forward or backward, aren't the right ones.
it changes everytime for example: on the left side I get +5:02 shift and the right side +3:10 shift
i try to create new project or smaller one even by XML export
i try to trash preferences
but there's no change
May be have you a idea or a suggestion?
it seems that external sound source or/and linking and merging fonction in this case are the problem
Thanks a lot
Roland
P.S sorry for my english but I used to speak french
Roland JOSEPH
Midi 20
1003 Lausanne
Switzerland
Tél: ++41(0) 21 312 17 45
Mobile: 078 746 63 62
[email protected]
[email protected]

Table Partitions and Rolling Window: free space not reclaimed

I have a couple of processes that involve the rolling window scenario where we drop an old partition and add a new partition monthly. We are seeing, however, that free space is not being reclaimed, and so I keep having to feed new datafiles into the tablespace (which is LMT). I was (mistakenly, it seems) under the impression that dropping a partition frees up that space for re-use.
We're currently on Oracle 10gR2 (10.2.0.2), but these tablespaces were orginally created in 9i. I've read that one solution is to implement "table shrinking," however I also see that is only available on tables in an ASSM tablespace. I see that ASSM is the default for tablespaces in 10gR2, but since my tablespaces were created in 9i, I assume they are not ASSM.
I'd like to see what other people think of this scenario. Surely a lot of people do the rolling window scenario and need space reclaimed.

No, it is of concern because Sanadra was messing with the partitions. She could have inadvertantly caused something to happen, in this case the free-space issue, and it's imperative to get all of the details.
My iMac 27' Late-2012 does not have a fusion drive, yet shows that the type is "internal" the original poster doesn't indicate that.

Subject: How to get a rolling window query of last 12 months?

Subject: How to get a rolling window of last 12 months?
I am developing a report on 0TCT_C21. I want to compare process chain execution time for every month for last twelve months to see a trending report.
How can I determine this information dynamically, i.e., when report is run, let us say in Dec 2009, it will show me 12 columns: Jan to Dec 2009, but if report was run in Dec 2010, it will show 12 columns results from Jan to Dec 2010.
Any information will be greatly appreciated.

Hi,
Keep offset value-1, -2, -3, ... -11 for 0Calmonth.

When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?

When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?

Maybe find a local who can translate for you. I don't know what to tell you for dealing in another country for service on your computer.
I can offer you something you can do if you want to give it a try. You'll need a backup of your data in your Home folder because you need to erase the drive. You'll also need a solid, preferably fast, internet connection.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Rolling window moves when browser window changes size??

I have added a rolling window into my page and it is in the
correct position when I click to preview, but when the browser
window moves (when I click on my Favourites window panel for
example) the rolling window moves along and out of its position.
Is there anyway to stop this?
Cheers,
Zoe

Change this -
</head>
to this -
<style type="text/css">

</style>
</head>
change this -
<body ...>
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -
</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dollecom" <[email protected]> wrote in
message
news:e5ffjv$qa8$[email protected]..
> I have added a rolling window into my page and it is in
the correct
> position
> when I click to preview, but when the browser window
moves (when I click
> on my
> Favourites window panel for example) the rolling window
moves along and
> out of
> its position.
>
> Is there anyway to stop this?
>
> Cheers,
> Zoe
>

Trim Edit window won't resize

This is odd.
When I double click an edit point to open the trim edit window, it opens up about 50% smaller than it should to cover the viewer and canvas. Even more strange, it won't let me resize the trim edit window. I go to the corner and try to pull it around, but it won't move.
Any ideas?

something quick to try; assuming you are already at your highest resolution, toggle it to a lower rez and then back to the higher rez.

Mixer/ Piano roll window

Hey Guys,
Looking to use the keyboard shortcuts to open mixer/piano roll windows...
Unfortunately if i send the shortcut numerous times it brings up new windows instead of the one window..
Ie i could have up to 6 mixer windows open.
Wondering is there a setting to only have one mixer window etc ?
Thanks

Yes, the shortcuts you use are to open a new window, not to recall or toggle an already opened window. Use cmd-` to cycle through all your open windows.

Quantize Strength - Piano Roll Window

How do you change the quantize strength in the piano roll window for Logic 8? In Logic 7, I would use my short cut to open the Extended Region Parameters window. In Logic 8, this seems only possible in the arrange window. Couldn't find this info anywhere in the manual or online.
Thanks in advance.

Hi Armen,
I haven't used 7, but I found what you described in 8. On the upeer left are all sorts of quantise parameters.
regards, Erik

Oracle 9.2.0.3.0 patch set for windows - questions

Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;

I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

Multiple im windows question.

i use the tabbed window view when im chatting it up with my friends. My problem is when im talking to more than 4-5 people it becomes increasingly annoying to constantly have to click on each persons name to respond. My question is: is there a way to quickly switch between members i am chatting with using a keyboard shortcut? any insight would be greatly appreciated!

I think apple/command + { or } key combination will advance or reverse your location through the chat tabs.
My iChat is currently out of commission or I would confirm this personally but if you could test it and report back that would be nice as well.

Mac and Windows Question

I don't know if this is the right place for this question, but it's the closest thing I could find to Apple software. As of now, I only own a Dell pc. When I can fork up enough money, I'm going to get a Mac, but until then, I was wondering if there was a name to the software that changes the screen according to the mouse's position. For example, if you move the mouse pointer into the upper right hand corner, all of the windows minimize, and if you put it in the bottom left, then you can choose which window you want to open. If anyone knows, please let me know. If anyone, on the off-chance, knows of a program that can do the same for windows, that would also be greatly appreciated. I wasn't sure if that was software or just part of the mac system, but it's really convenient and I'd appreciate it if someone got back to me. Thanks a bunch,
Ben

Hi Ben
Welcome to the Apple Discussions!
That is called Exposé, and it's part of OS X.
There are a few lookalike apps for Windows - here are a couple:
Windows Exposer
TopDesk
Matt

Trim/Roll Window Question

Similar Messages

Maybe you are looking for