Trip Co Document posted with value type 11 - Statistical actual

Dear all,
Can you please share what caused the CO document posted from Travel Management (tcode: PR05) having value type = 11 Statistical Actual?
So far all the CO documents posted from Travel Management have value type = 4 - Actual.
However we have a CO document posted from Travel Management with value type = 11 - statistical actual.
Question:
1. What caused the CO document posted with value type = 11?
2. How to fix/change the value type for this CO document from 11- Statistical to 4 - Actual?
Thank you very much in advance for your kind assistance.
Best rgds,
DTan

Normally it means that in your CO account assingment there is also another CO object with a higher priority where the real value was posted.  For example if you do account assingment to the Cost Center and Internal order the real object will be Internal order and statistical posting will be at the Cost Center.  Anyway it should be visible within CO document.
The way to correct it is to reverse and repost, means changing the trip and transferring it again.

Similar Messages

  • Revesal of document posted with movement type 654

    I have created one outbound delivery using tcode VL01NO (Create outbound del without order reference). In PGI material qty was issued using movement type 654. Now, I need to reverse this document i.e. reversal of movement type 654, but system is not allowing the same.
    Pl help on this
    regards,

    movement 654 is already the reversal to movement 653.
    A reversal movement type does not have a reversal movement type.
    you may need to create a new schedule line category in VOV6 to create a new outbound del without order reference with a 653 as movement

  • Post proft segment and cost center in a sales order with value type 4 in CC

    Hello,
    We have CO-PA activated in SD. When we create the Sales order the field "Profit Segment" is automatically filled (with the characteristics values) and additionally we field manually the cost center.
    The main problem is that when we post in the two CO objects the cost center becomes automatically with value type 11 "Statistical Actual".
    In the end of the month we need to do the Assessments (KSU5) from the invoices created from one cost center to various cost centers but since the cost center in the invoice has "statistical  actual" value type we can't do the assessments.
    Is there any way to post in profit segment and in cost center and the cost center becomes with value type 4 "Actual"?
    Thank You

    Hello,
    Thank You for you answer. I have one more question.
    Is there any way to desactivate the field "Proft Segment" only for a specific document type?
    I've already tried in transaction KE4W and system is not creating now the Profitability Analysis document but this field "Profit Segment" is still  with values so the cost center is still with value type 11.
    I've tried to delete manualy the values in the field Profitability Analysis but system gives me an error related with incomplete data in sales order. I've look in SD customizing and this field is not configured in the incomplete data messages
    Best Regards

  • While  F-92 posting with T type 210 not possible  (No acquisition posted)

    Hi
    Asset Retirement Not Possible
    We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
    I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Ajay
    yes we are using Group Assets for income tax depreciation
    when checked at AS83 no values found under taken over value for the group asset
    ***. aquistion val  - 0
    and all other values are zero
    Edited by: johnrambo on Oct 4, 2010 12:09 PM
    Moderator: Don't repost threads which were locked by moderator

    Hi
    As I said, go to AS82 and upload the Income tax values for this group asset....
    Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
    Regards
    Ajay M

  • Asset Retirement (ABAON) error - Posting with trans.type 210 not possible

    HI All,
    I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
    " Posting with trans.type 210 not possible (No acquisition posted)"
    The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
    The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
    So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
    (The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
    Could any one help in this, or let me know the correct process for this kind of transactions.
    Awaiting for a reply.
    Regards,
    Upendra

    HI Mamta,
    Thanks for the reply.
    While Uploading the data was uploaded as asset balance upload for prior year with value.
    Plase let me know what do you propose, to be done for this.
    Regards,

  • FI _AA errr Posting with trans.type 210 not possible (No acquisition posted

    Asset Retirement Not Possible  
    Dear,
    We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
    I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Can anyone Help on this topic
    Regards,
    rambo
    deleted
    Moderator: Please, search SDN*

    Hi Rambo
    I think you are using Group Assets for income tax depreciation
    If yes, have you uploaded values into Group assets from AS82? Can you please check this and revert
    Regards
    Ajay M

  • Error posting with trans.type 159 not possible (no aquisition posted)

    Hello All,
    A user has created an PO for asset with GR non valuated  in 2007 and has performed a MIGO/GR in the same year 2007. Now in 2008 the user has received an invoice against the said asset and wants to post it thru Trans MIRO.
    At the time of posting the invoice the user gets the error "posting with trans.type 159 not possible (no aquisition posted)" . Since this is a completely new asset and GR non valuated asset process is a standard in SAP why is the system recognising the transation type as 159 i/o trans type 100 ie new asset aquisition.
    If i post a dummy value to the same asset using FB01 the system accepts the value but the same process if i intend to follow usin MIRO system does not allow.
    Can you guys help me
    Thanks
    Nelson

    Thanks Paul for your reply, I checked the depreciation key. inthe key the "Aqu only allowed in capitalization year is marked as NO"
    Therefore the problem is not the depreciation key
    Thanks
    Nelson

  • Posting with trans.type 645 not possible (No acquisition posted) Message no. AA324

    Hello,
    I have post the depreciation of  asset, which is legacy asset & value arise through AS93.
    Now i realized that the i have charged more depreciation. hence While doing Debit manual depreciation of Asset through T code ABAA & using transaction type 645, system showing error message,"Posting with trans.type 645 not possible (No acquisition posted) Message no. AA324".
    Please help us to resolved this issue or any other way to write off the depreciation which is excess charged earlier for legacy asset.
    Thanks & regards,
    Pramod

    Hi,
    According to me you can create a new transaction type which is exact opposite to depreciation key 640 and then with that transaction type you would be able to post the unplanned depreciation by which the asset value will increase.
    Regards,
    Malhar.

  • Posting with trans.type 210 not possible (No acquisition posted)

    Hi,
    While doing asset retirment through f-02 we are facing this error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Please provide solution.
    Regards
    Kuldeep singh

    Hi
    Values are there in the asset .
    capitalisation date is 21.05.2008. and the value in transaction tab is 149,715.00 Rs. Is there other way to retire the current year assets.
    regards
    Kuldeep singh

  • FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54

    Hi all,
    I am using Former Budgeting and is configured for Commitment Budget only (not configured for Payment Budget). When I tried posting via GL Document Entry to test FM, I encountered the following error.
    [Message no. FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
    Diagnosis:
    Posting for the document of value type 54was attempted on a date that has not been opened in FM.
    Procedure:
    To define open item intervals for FM postings, use the following transactions:
    Individual Maintenance of Open Time Intervals
    Mass Maintenance of Open Time Intervals]
    I have already maintained in transaction FMIR.
    The entry is:-
    Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
    9B Commitment Budget/2010//00 All Account Assignment// / /16
    What else do you think could be causing this error?
    Regards,
    Bernard

    Go tcode FMIR.
    Ensure that you both entries:-9A Payment Budget and 9B Commitment Budget.
    Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
    9A Payment Budget/2010//00 All Account Assignment// / /16
    9B Commitment Budget/2010//00 All Account Assignment// / /16
    Regards,
    Bernard

  • Batch uploading to a document library with content types

    Hi,
    I have a document library with two content types. Now I need to upload documents to this document library. However, if I have large number of files, then uploading through web UI is a pain as metadata will not be attached. How should I automate it  from
    my computer using powershell without relying on Administrator to run the powershell script. Or is there any other way to do it without using powershell? or  can powershell be run remotely from an end user computer?
    Note I am using SharePoint 2010.

    Hi,
    According to your post, my understanding is that you want to butch upload files to document library with content types.
    There are two good tools in CodePlex which can batch upload files with content types, you can have a look at them.
    DocMetaMan : Bulk document Upload and MetaData (Taxonomy) Setter
    SharePoint Multiple File Upload Script
    There are some third-party tools which can achieve the same scenario, you can refer to it.
    http://sharepoint.stackexchange.com/questions/74694/uploading-multiple-files-with-metadata
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Error : Posting with trans.type 200 not possible (No acquisition posted)

    Dear All,
      Iam getting error while doing asset retirement thru ABAVN. Error is mentioned below. Pls do the needful.
    Posting with trans.type 200 not possible (No acquisition posted)
        Message no. AA324

    Dear Bird,
      Already asset has been posted , but then also it shows the same error.
    pls help on this.
    regards
    Ranjit..

  • MIRO error Posting with trans.type 159 not possible (No acquisition posted)

    Hi,
    I have the following probem while doing MIRO.  Would appreciate if someone could help.
    Error in Purchase invoice posting MIRO  :-
    The user has created a PO for asset in  FY2010 and has performed a MIGO in FY2010.
    Now in FY2011 the user tries to  invoice against the  above asset and wants to post it thru Trans MIRO.
    System gives an  error during MIRO  "Posting with trans.type 159 not possible (No acquisition posted)"  Message no AA 324
    Trans type 159 has trans type group 12 attached to it.
    MIGO can not be reversed  because it belongs to the closed FY.
    Please help

    Hi
    refer notes 1526247 and 1507808... Though it relates to Japan, but the issue is same
    Br, Ajay M

  • ASSET TRANS-Posting with trans.type Z30 not possible(No acquisition posted)

    Hi Experts,
    Am creating a sub asset 001 for my_asset_1, via 'BAPI_FIXEDASSET_CREATE1'. Fine.
    Then, am trying to post the Asset transfer for my_asset/001 by using a BAPI of  'AMDP_BAPI_CALL_ON_TRANSACTION'.
    But, am getting the Error(via ABUMN am NOT geetting any ERROR)- <i><b>Posting with trans.type Z30 not possible (No acquisition posted)</b></i>
    Am passing paras, like,
    so, pls. clarify that,
    1 - Wht is the meaning of Error message am geeting?
    2 - How to fix it?
    thanq.
    Message was edited by:
            Srinivas
    Message was edited by:
            Srinivas

    closing, bcoz, did not get good answer

  • MIRO - Posting with trans.type 159 not possible (No acquisition posted)

    Hi all,
    I have a case where an asset PO was created with multiple account assignment in one line item.  For example, purchase 10 pc of printer with 10 asset numbers specified in the account assignment tab.  By standard SAP, the GR is non-valuated.
    The GR of the PO was done in the previous period.  Now, when the invoice is to be posted thru MIRO.  The system generate error message to me.  The error message is "Posting with trans.type 159 not possible (No acquisition posted)" and message number is AA324.
    The reason of this error is due to no acquisition date in the asset master.  GR is non-valuated hence, the acquisition date is not populated in the asset as well.  I believe this is quite a common problem.  Kindly advise any workaround solution.
    Thanks.
    Tom

    Hi
    refer notes 1526247 and 1507808... Though it relates to Japan, but the issue is same
    Br, Ajay M

Maybe you are looking for