Trip Distance application functioning of firmare h...

Can anyone who has updated their software past version 11.047 get the Trip Distance application to work? I have updated with a prior N85 to version 20.175 and it caused the feature to stop calculating distance.

Moved to navigation section

Similar Messages

Anyone checked E70 trip distance accuracy?

Moved from Eseries forum.
Hello
Nokia E70 Firmware 3.xx
How accuraten do you expect the built in odometer (Trip Disttance) application to be?
I have tested with Nokia external LD-3W GPS and the distance has been 2x of the actual 2 km distance.
With such an error it's difficult to find much of use to it.
When I have checked cordinates, there have been correct.
The problen may come from the GPS drift 10-20 metres, that's even when GPS is on the office window E70 may report a speed of 1.5 km/h (Expected 0 km/h)
It looks that E70 isn't able to calculate distance correctly with slow speed (walking).
Any other Nokia more precise at given task?
Is there any other better performing applications for E70?
Thanks.

Moved to navigation section

Error when calling up the application function for hierarchies

Hello,
if I try to load a material class hierarchy and the loading is failing directly in source system with error message "Error when calling up the application function for hierarchies". Did anybody have this problem? I could not find anything iside the forums.
Thanks for your help!
Regards,
Christian

Hi,
I have the same problem. Do someone know the solution? What is the problem?
Thanks,
Ángel.

Software Version 20.175-Problems with Trip Distanc...

I have had three phones over the past month- two (2) N79 and now a N85. I have had problems with the Trip Distance and Position software in each phone. It was not until I got the N85 that I knew why. I checked the Position software and Trip Distance last night when I first got the N85 and both worked perfectly. Stupidly, not realizing that it might be a firmware issue, I downloaded the update to the N85: Version 20.175. Sure enough I went to use both features this morning and I have exactly the same problem: the trip distance and position software will not calculate distance moved. It is the exact same problem I had with the N79s. Can anyone with either of these phones, who has updated to version 20.175 get the trip distance and position software to calculate distance?
Is there anyway to re-load the prior software version 11.047( I think that is the version ) on to my phone? Thanks

I don't have either of the phones you mentioned, so sadly I cannot help you with those bugs. But as for downgrading the firmware I know it is not possible to do it on your own. You're gonna have to take it to nokia center and ask them to do it. Usually they won't unless you're having serious problems with the newest firmware, but if you're smart about it you can get them to do it for you.
N78
5800XM

How to use ADF application functionality in Webcenter Portal

Hi,
We have an separate ADF application with bunch of functionality that are been using in others applications.We have to use these functionality in the WebCenter portal.
In this ADF application, each jspx page used for implementing different functionality(for example Calendar for one page, subscriptions for one page like that) and there are no bounded task flow used.
Challenge here is, need to some how import the ADF application as reusable component (section) and yet to use different functionality (I mean accessing each jspx page)
So, what are the ways we can utilize these ADF functionality in WebCenter portal? Let me know your thoughts?
Any help really appreciated.
Thanks,
San.

All,
if you have WebCenter in place the best way is to use the ADF portlet bridge. You can create portlet entries at design time in JDev on each JSPX as well as on any TaskFlow definition (right click as mentioned above). That's quite convenient if you stay in the WebCenter / ADF world. You'll get the standalone as well as the portletized application so the standalone version will still be working. Mind that if you portletize an ADF Application you need to deploy it in a portlet runtime. That means you need to extend your ADF container with the portlet runtime. That requires a WebCenter license for the server since the portlet runtime is a part of the WebCenter product stack.
In respect of SSO, after deploying your Portlet Producer App you'll get WSRP Webservices on application level for which you can apply OWSM policies (Enterprise Manager) so the identity of the portal will be propagated to the Portlet Producer App. Details can be found on WebCenter Portal Developer's Guide.
Just to let you know that these portlets can be only consumed on Oracle's portals (be that WebCenter or Oracle Portal 11g). That's caused by some Oracle specific WSRP additions to the ADFPortlet Bridge.
Jiri, what do you mean with "enhance it with portal features"? Oracle's portlet aproach is fully based on WSRP, means decoupling. So you cannot add portal features to the portlet. Everything has to be packed in request and response. There's no direct access to portal /portlet resources to interact with.

In Flex application functionality is working sometimes and not working sometimes..

Hi,
Please help me on this..
In my flex application some functionality is working some times and not working sometimes..
In my project i have 5 sections with 5 separate screens..Each screen is of one diffeent module.
After logining into the application:
I will go to one screen..First time every functionality is working in that screen..
Ex:: I have a screen with datagrid.From that user will select one job name from datagrid click on next button..
Based the job name the user selected i have to display some information in next screen and customer names.customer names is a combo box..
below is the code:::
               public function populateAllOEMCustomers(event:ResultEvent):void
        1)     var object_CustomerList:CustomerList = event.result as CustomerList; //Assigining result object values to Object reference variable.
          2)    var allOEMCustomersCollection:ArrayCollection = new ArrayCollection(); //Declaration ArrayColliction referance variable.
         3)       var i:int=0;
         4)      var customerComboLabel:Label = new Label();
          5)      for (i = 0;i < object_CustomerList.arryCollCustName.length; i++)
                    var strCustName:String = object_CustomerList.arryCollCustName.getItemAt(i).toString();
                    var strCustId:String = object_CustomerList.arryCollCustId.getItemAt(i).toString();
                    customerComboLabel = new Label(); //Dynamic declaration of label.
                    customerComboLabel.name = strCustName; //Assinging the customer name to the Label name field.
                    customerComboLabel.text = strCustId; //Assingning the customer id to the Label text field.
                    allOEMCustomersCollection.addItem(customerComboLabel); //Adding Lable into the ArrayCollection referace variable.
                //customerComboID.selectedItem = "--";
                OEMCustomersComboID.dataProvider = allOEMCustomersCollection;
                OEMCustomersComboID.selectedItem = -1;
This functionality is working fine when i visit to this screen first time..If you go back to another screen and come back to this same screen and click on next button this time customer names combo box has no customer details..I am getting Nullpointer Exception and it is showing the line number 5( i have given the number for code given above..)
If i change the first line of the code to below code:: every time the above functionality is working fine.Not getting any error msg..
var object_CustomerList:Object= event.result ;
If i type cast it to specific class(CustomerList) ,functionality is not working ..getting null pointer exception..If i type cast it to Object everything is working fine..In my code wherever i have typecasted it to specific class functionality is not working(gettingNullpointerExcepion).
Please help me on this..I am not getting what could be the reason..
I am using::Flex 3,Flash player 10.1
Thanks in advance..
Regards,
Satya

Hi Satya,
This sometimes as in your case might not work as the way you have specified the RemoteClass attribute in your AS class. As somtimes there may be a case as before it is mapped to a server side you are returned the data and so that you may not get the data as your Custom class but as normal Object type.
So in order to avoid this you can map the server side class to AS classes in the PreInitialize handler itself as shown below:
Specify the preinitializeHandler in your main application and write the below function.This way also you can map AS classes with the server side. So that you will not have any problem referring your application as AS class types.
You can use the same line for registering all the classes. By using this you can remove all the [RemoteClass] attributes on all AS classes and include it at single place.
preinitialize="onPreinitialize()"
private function onPreinitialize():void
registerClassAlias("com.expeditor.ScriptAdmin.Objects.CustomerList", CustomerList);
Here in the above line of code the string in quotes refer to the namespace of the Server side class and the latter is your AS class. Also dont forget to import the namespace of the corresponding AS class in the file.
Try this and let me know..
Thanks,
Bhasker

Calling parent application function from ItemRenderer

Hi, I have a spark list control whose data is rendered using an itemrenderer. Basically the Item renderer lays out the data within a Panel.
The Panel has a LinkButton, which when clicked needs to pass an Id to the parent application. In the parent application I have a function that dispatches a custom event to its parent. I want to know how to call this function from the ItemRenderer.
I tried using parentDocument.outerfunction etc but it throws an error..
Can I do this using custom events ? If so, how ? Please explain in detail
Thanks ,...

You can Access via
parentDocument.parentDocument;
MainApp.MXML:
<s:Application
<s:Group width="100%">
                              <s:HGroup left="40" top="40">
                                        <s:List width="100%" dataProvider="{items}"
                                                            itemRenderer="ServicesIR"
                                                            contentBackgroundColor="#E6E7E8" borderVisible="false">
                                                  <s:layout>
                                                            <s:HorizontalLayout columnWidth="50" gap="5"/>
                                                  </s:layout>
                                        </s:List>
</Application>
ServicesIR.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:ItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009"
                                        xmlns:s="library://ns.adobe.com/flex/spark"
                                        xmlns:mx="library://ns.adobe.com/flex/mx"
                                        autoDrawBackground="true">
<fx:Script>
                    <![CDATA[
                              override public function set data(value:Object):void
                                   var parent:MainApp = parentDocument.parentDocument; //Instance of MainApp.mxml
]]>
          </fx:Script>
<s:ToggleButton id="tab" isAlerted="false" label="{(data.name}" horizontalCenter="0" verticalCenter="0"/>
</s:ItemRenderer>

Application functions differently between accounts

I recently installed Adobe CS4 and found that Dreamweaver was very slow. Adobe suggested that I create a new admin user to see if that helped. It worked excellent, but is there a way to cleanup my original user account so it will function without having to work between two user accounts?

By creating a new user account that eliminates your problem, you've identified possible problem sources:
preference file(s)
Applications Support files/folders
incompatible startup items, login items, preference panes, or contextual menu items
corrupted cache files
The above would be those located in the Home folder.

Fillable forms applications/functions

I'm doing research on the functions of the fillable forms. Would it be possible to obtain a features list of what fillable forms can do, and what they can be used for? I'm looking to see if they can be applied to any processes at my work place.
Also, is there any knowledge available on what types of features could will be implemented in the future releases of Acrobat, pertaining to the functionality of fillable forms?
Thank You

Have you looked at Planet PDF, http://www.planetpdf.com ,or the Acrobat Users Community, http://www.acrobatusers.com/ ? There are a number of articles, tutorials, and vedios aavailable about how to do a lot with forms. Acrobat Forms and LiveCycle Designer can use EMCA 2.62. Adobe is moving more toward the XML form standard.
Alot of the form functionality will depen upon how well you can program the forms.

BSP Applications functions and working

Step by step procedure based on the functions and attributes of each and every technical terms
Modertaor message : Wrong forum. Read rules of engagement before posting. Thread locked.
Edited by: Vinod Kumar on Jul 15, 2011 5:25 PM

Hi Yann,
Code will be generated as class. IF you want the class name of current webdynpro component that is generated, right click on the webdynpro component -> select check -> extended syntax check. New window will be opened in which program name will be specified. Remove the "" ==CP" suffix and remaining part is the class name of the current webdynpro component.
Thanks,
Prashanth

Why after updating to iOS 5 does my application functions start up slower than before updating?

Why does my iPhone 3 seem to have slower reaction time ( starting up applications i.e. receiving and sending of sms , games apps etc) after updating to iSO 5?? Is there a update soon to correct this issue?? Friends also experience the same issue.

I guess we should ask Apple what their definition of "trickle charge" is, as that's the term the iPad manual uses - the "iPad user guide for ios 5" manual I downloaded via iBooks after installing ios5.
My MacBook Pro is a 2008, Intel duo processor.
I agree, it would be helpful if Apple would define things better! I don't find the manuals they provide all that helpful, as a rule, and usually end up buying 3rd-party publications.
I can certainly understand your frustration.

"Intsallation failed" but application functioning

Hi;
On a new computer I installed CS2. (I like some things in that suite, like ImageReady). It asks me to activate, which doesnt work ("Activation server unavailable" which doesnt really surprise). 2nd time it says my 30 day trial has expired when I try to activate. So I cant use it. I explain this because it may be related to my CC problem.
I installed CS5 (I write courses and still have some CS5 students).
Both CS2 and 5 are on my own Adobe account. They are installed on D (big HD).
Then I installed the CC Application Manager, on the account of the company I work for. All CC stuff on C (SSD).
I installed PS. At the end it said "Installation failed", but PS 2014 works fine.
I need to install a lot more, MU, ID, AI... and also (other students) the CS6 versions.
I see on C in /Program Files (x86)/ an /Adobe/Adobe Creative Cloud/ folder, while in /Program Files/ I have /Adobe/Adobe Photoshop CC 2014/ (all this managed by the Application Manager).
How shall I proceed?
Thanks,
Maarten

for cs2, Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3

Long distance application failover between data centers.

Hello:
I am working a project where there is a requirement to have a primary server and a secondary for application failover. The requirements dictate that the servers must be geographically separate at separate data centers but yet on the same IP subnet so that heartbeat messages are not natively routed. What protocol can I use to bridge the subnet over an IP routed network? GRE? L2TP?

GRE will not work as according to the last information I have you cannot bridge over a GRE tunnel. We had one such application with similar requirements and we ended up using L2TPv3 that allows transparent LAN extension. We have not had any issues with it and if you are only going to use it for heartbeats you should not run into any performance issues. L2TPv3 does tend to drive the CPU utilization high in case you have a lot of data traversing the tunnel.

Leopard goes clumsy with HIDE Application function

Since upgrade to Leopard. I noticed some application do not HIDE when press Command + H, or when select the command via Menu.
For example:
I open Mail, iCal and Safari.
Safari is active and in front. Press Command + H, and nothing happens. Then click in Mail icon in the Dock pressing Option. And appears Mail, but the Safari windows remains grayed. I click in the Safari window again, and turn to dark gray as an active application, but the menu shows Finder.
Using Command Tab, go to iCal, and press Option Command + H to view only the iCal window, but Safari is there yet.
Any suggestion will be great.

I also have this clumsy behavior. It definitely has to do with the login-items in your account settings. If applications are added to the login-items and they're not set to 'hide' automatically after start-up, you'll get the strange behavior that they cannot be hidden anymore. However: if you set all those items to be hidden automatically in your account-settings, you will be able to show/hide them afterwards during your session. The workaround thus is: if you start-up applications automatically after login, be sure to hide them automatically also in the same settings pane.
Bram

Robot Application Function

Hi,
I have some queries related to robot processing:
1. In the filtering process, when will shutdow stage gets called. Will it be called after robot completes one run (and either going idle or start over) or after robot is stopped/shutdown?
2. If we add plugin function say
shutdown fn=myShutdownFunc
In this method, can we retrieve RD's generated in this run (if any by filtering process) through some robot API?
Any help will be appreciated...

sorry to disturb you
why i want to use in the data template i couldnot create a package for each and every report. if i start creating like that they cannot manage database object. So for that i am seeking an alternative way?
thank you

Trip Distance application functioning of firmare h...

Similar Messages

Maybe you are looking for