TRIP END DATE greyed out while creating Travel Request IN SAP ESS Portal
Dear Friends,
I am trying to create a Travel Request from my ESS Portal,when I am entering the trip details as follows:
General Trip Data (header)
Start: * (Have to enter trip date)
End: (greyed out) **** problem with this field
First Destination: Country/Region: open field
Reason for Trip: open field
Activity: open field
Estimated Cost:
Previous Step Review Exit (these are all tabs)
The problem is that the END DATE is greyed out ,how do we enable it,is it a configuration setting or some code change in the function module
PTRA_UTIL_GENERAL_DATA_FIELDS
My portal consultant said that this FM is called in the backround R/3....please let me know ure views on this...
Thanks,
Best Regards,
Karthik
Hi Kartik,
We are getting the same problem. Can you please share how did you solve this. It is urgently required.
Thanks,
Vishal Patel
Similar Messages
-
Displying wrong data after entering estimated cost while creating travel request.
Hi Team,
We are facing an issue while creating travel request from portal.
When we are entering estimated cost and after clicking on save and send button we are getting data is saved as correct.But after clicking on display form button the data is showing as different.
But after clicking on display form it is showing as 298900(adding two zeros at end for every cost).
Please help on this.
Thanks & Regards,
Kumar.Hi Shankar,
Thanks For the reply. Can you please let me know what settings need to be there in SU3. This issue is effecting for all the users belongs to that country. Can you please suggest me!!
Thanks in advance.
BR,
Kumar. -
Error while Creating Travel Request ..thru TRIP
Dear all,
As I am suppose to creat a travel request thru TRIP but i am geting the below error and the msg no..............
Error: Trip country IN / trip region do not exist in the system (T702O)
Message no. PTRA_WEB_INTERFACE031
As Mr. Paulo Vitoriano suggested me to Define Trip Areas, etc......... but my Trip Areas has already been defined and i have checked it also .... but still the error is same ....... so frnds pls tell me wat else may be the problem....
I read thred Error while Creating Travel Request ..thru TRIP which is posted by prasanth but what they suggested i maitained already but still i am facing same problem could you pls suggest me where i missed.
Waiting for Reply.
Regards,
NagarajuHi,
Please check the following:
1. Just check have you assigned country India to the trip provision variant you have created.
2. Just check whether you have assigned the trip provision variant correctly to the respective country.
Regards,
S.Srikanth -
Error while creating Travel request
Dear All,
ESS 2005/SP6
While creating travel request in I am getting following error
"Errors have been discovered when checking the Expense Report. Please correct them in order to proceed."
Regards,
Kamal RawalHello Kamal
Did you manage to resolve the issue in relation to "Errors have been discovered when checking the Expense Report."?
Best Regards
Roger Earle
[email protected] -
Co code Segment is greyed out while creating a Business partner
Hi All,
I am trying to Create a Customer thru BP . I have asigned a role and made the necessary setting in " Configure Field attributess as a per BP role. However the Co code segment is coming greyed out .
Can you please advise what needs to be done to open up the sameHi Samit,
You mean to say that the Company Code Data Section is Greyed out.
From your message i understood that you are trying to create a Customer in XD01.
If that is so give your Company Code in the Company Code Field in the initial screen.
Reward if helpful.
Regards
PAVAN -
Creating Travel request with TRIP Getting Error 'Infotype P0017 could not be read'
Getting this error while creating travel request with TRIP transaction code. Please help for an alternate way to create Travel request or help to resolve this issue.
If this error is due to 0017 maintenance, please help me to maintain infotype 0017.Hi
This is done by functional Guy
As work around
Go to transaction PA30 to open master record of employee for whose trip need to be created type 17 at infotype -> enter F5 and Save.
With regards,
Gopala Krishna -
Creating Travel Request Error( structure field City_Districtadr not found )
Hi All
While creating travel request from EP, we are encountering the following "error:com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcTreGeneralData.GeneralDataCheck.GeneralDataCheck_Output.GeneralDataCheck_E_General_Data): structure field City_Districtadr not found "
I believe the issue is related to SP levels. Can anyone help resolve this.
Thanks
R KumarHi,
As other said you may need to update software components SAP-HR , EA-HR for this check this
SAP Note 761266 - Self Services Patches
Regards
Vijay
Edited by: Vijay Mohan on Jun 27, 2008 3:11 PM -
Picking is greyed out while i create delivery in Consignment Fill Up
Dear SAP Gurus..
Plz, advise,
Picking is greyed out while i create delivery in Consignment Fill Up.
I'm able to create Consignment sales
Scenario:
Comp A --> Comp B --> Customer
but Material should be remain in CompA value vise
Only Inventory of Comp B will be hit.
Thanks
Gauravhi,
you need to check in two areas:
OVLP - Item Not relevant for picking in item category.
LT03 or subsequent functions at delivery level - for transfer order.
balajia
Edited by: balaji timmampalli achari on Dec 9, 2010 7:50 AM -
Making material short text grade out while creating PR
dear all
while making pr for materials,by t-code me51n, the system does not make the material short text diable/grade out.
eg if i select material from material master say material code 1000055-----& short text is --cement 53 grade.
then at the time of creating pr i can change the short text cement 53 grade to any off my choice.
logically this should not happend, as then their will not be any trace of PR in system.
pls let me know how to come out of this problems.
as we want that when ever we select the material from MM master, the system should make the short text grade out while creating the PR, so that further complication can be avoided.
thanks in adv
regards
pairkshithi manohar
this process does not work. beacause with this process the system disable the entire coloumn of short text in ME51N.
which is not our requirement.
the system should only grade out the material short text cell while we create the PR for material, so that one could not able to change the material short text which has come from MM master
is their any other solution for this.
regards
parikshit -
Portal runtime error on creating Travel Request
I have copied the standard ESS Role and created my own ESS Role. I then assigned this to my portal user.
Then when I log into the portal as the user and click on "Create Travel Request" or "Create Expense Report" URLs, I get the following error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:53_02/02/10_0021_23623650
Refer to the log file for details about this exception.
Is there any portal/IMG setup that is missing? Or any authorization missing?Thanks I made changes to Resources node in IMG.
Before making these changes I was getting the following error:
Portal Runtime error. An exception occured while processing your request... Exception ID:.... Refer to log for details....
I just changed the URL of PCD page in the Resources node.
Note:
(1) In Portal I have made my own folder structure:
-> Portant Content
-->My Travel Setup
--->Employee Self-Service
>Roles
>MyTravelESS (role copy of the original Portal ESS role, Delta link. i.e. ESS role under End User Content-->Employee Self-Service)
(2) I have not copied the iviews, pages worksets etc. under my new folder structure.
But Now I am getting another error:
500 Internal Server Error...
Root Cause
The initial exception that caused the request to fail, was:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name base -
Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
RaviHi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi. -
Error message while creating Appropriation Request
Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors RAISE_EXCEPTION
Date and Time 18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
condition "ERROR_IN_STATUS".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLAIA_TOOL
Include LAIA_TOOLU11
Row 119
Module type (FUNCTION)
Module Name AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 * TYPE = SY-MSGTY
90 * CL = SY-MSGID
91 * NUMBER = SY-MSGNO
92 * PAR1 = SY-MSGV1
93 * PAR2 = SY-MSGV2
94 * PAR3 = SY-MSGV3
95 * PAR4 = SY-MSGV4
96 * IMPORTING
97 * RETURN = ls_return.
98 * endif.
99 * if not ls_return is initial.
100 * append ls_return to return.
101 * raise error_in_status.
102 * endif.
103 *
104 * Füllen der Ausgabetabellen
105 perform fill_output_tables tables lt_status
106 lt_jsto
107 et_appreq_status
108 et_appreqvarnt_status
109 et_appreq_user_status
110 et_appreqvarnt_user_status
111 lt_objnr
112 lt_objnr_varnt
113 lt_return
114 using i_language
115 i_with_text.
116
117 if not lt_return[] is initial.
118 append lines of lt_return to return.
>>>>> raise error_in_status.
120 endif.
121
122
123 ENDFUNCTION.Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Error in Create Travel Request
Good Morning.
I am implementing Travel for ESS. But in the moment of give clic in the service for Create Travel Request the system display the following error:
[Error Travel ESS|http://www.freeimagehosting.net/uploads/46ed778b99.jpg]
What is cause of this error?
Kind RegardsHi Sergio
I check and the User is not expired.
I found the following suggestion.
I asume that you are using a "Basic Authentication" method, if this is your case, you should configure the SICF service with the following parametters:
1) Go to SICF, /yourservice / double click
2) On the "Logon Data" tab, in the "Procedure" option choose "Alternative Logon Procedure".
3) On the same tab, at the "Logon procedure option", delete the SSO option, and change the Number of the another methods, raised the "Basic Authentication" to the first place.
4) Go to Error pages tab, flag "System logon", and after that click over Configuration, here check "Do no display warnings"
The question is:
This is necessary?
Kind Regards -
No popup to select active implementation cycle, while creating change Request
Hi,
I have two active Implementation projects.
While creating change requests, it is not giving any popup to select the specific cycle.
It automatically assigns to newly activated Cycle.
Please advise.
Thanks & Best Regards,
Kiran SathyanHi,
if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
Now I dont think so Popup functions applicable for implentation cycles.
check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
and regarding closing the project cycle check this out below informations,
933705 - Closing inconsistent project cycles
Change Request Management scenario: Usual questions and known errors
question 10.
Make sure you closed open tasks, chk in tcode scma
Thanks
Jansi -
Hi All,
I am trying to know how I can restrict a requester to select specific system only while creating a request.
I could find aut. object GRAC_ROLEP in role "XXX_requester". There is field GRAC_SYSID in this object wherein
I can specify the connector name. Initially, it was having "*" value and then I changed it to specific
connector. I sychronized the roles/users data and tried to raise a request. However, I still find all the
connectors defined including LDAP!
May I know how I can show only "required" connectors while creating a request?
Regards,
FaisalDear Faisal,
use GRAC_SYS and restrict GRAC_SYSID to the systems you want to display.
Regards,
Alessandro
Maybe you are looking for
-
Reader 9 PDF printing problem with Canon printers
If you get no job output but only a blinking LED on various Canon network printers this might help: 1. Open Acrobat or Adobe Reader. 2. Choose File > Print. 3. Click the Advanced button. 4. Check "let printer determine colors" Additionally you might
-
How do you delete credit card information from your apple account?
I bought an app with a credit card before, and now I want to install a different app which is free, and it won't let me. It keeps saying to put in a credit card security code but the app is free!!?!?!?!?!?!help!!!
-
Mail 8.2 Sending Messages from Wrong Email Account
This has been happening more often than not lately on the Mail 8.2 app. It's driving me crazy, and really messing up my business since I have a professional email (using Outlook) and a personal email (Gmail). Both email accounts are setup on my Mac M
-
Uploading Meter data into the system
Can some one please describe the process of uploading the meter data into CC&B. What is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able
-
My jspx query code doesn't respond
<?xml version="1.0"?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:c="http://java.sun.com/jstl/core" xmlns:sql="http://java.sun.com/jstl/sql" version="1.2"> <jsp:directive.page contentType="text/html"/> <jsp:directive.page impo