TRIP error - simulated settlement contains errors

Hi,
Can someone help me to solve below issue
Thanks,
Chandru.
Trip can not be saved due to errors in simulation
    Message no. 56312
Diagnosis
    You are using Funds Management. To set up a commitment, temporary trip
    amounts must be created by simulated settlement.
    Since the simulated settlement contains errors, the trip can not be
    saved.
Procedure
    Please contact your system administrator.

Hi Chandru,
I believe it has nothing to do with Trip activity Type.
The Company code and Cost center should be maintained in IT0017.
Thanks,
Francis

Similar Messages

Error "Unkown Bravo Error" and "Invalid Container Error"

I am trying to render in After effects and keep getting the error "Unkown Bravo Error" and "Invalid Container Error". What do I do to resolve this?

Try using the "secret" preferences to purge every couple of frames. If you hold Shift while clicking on After Effects > Preferences > General, the Secret menu should pop up in the sidebar of the Preferences dialog.
Alternatively, if rendering to a QuickTime with the video codec set to PNG instead of Animation didn't work, try rendering to a PNG sequence and not a video format at all.

Error Caller 09 contains error message - Data Marts loading(cube to ODS)

Dear all,
          Please ! Help me in this problem, This is very urgent.
          I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
         Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
          Error message from the source system
          Diagnosis
         An error occurred in the source system.
          System Response
         Caller 09 contains an error message.
         Further analysis:
         The error occurred in Extractor .
         Refer to the error message.
         Procedure
         How you remove the error depends on the error message.
         Note
         If the source system is a Client Workstation, then it is possible that the file that you wanted to                load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
              Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
         Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
         Thanks,
          Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AM

Hi Friends !
                  I didn't find any short dump for that in ST22.
                  Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows this messages :
                    Request still running
                    Diagnosis
                    No errors found. The current process has probably not finished yet.
                     System Response
                     The ALE inbox of BI is identical to the ALE outbox of the source system
                       or
                     the maximum wait time for this request has not yet been exceeded
                       or
                    the background job has not yet finished in the source system.
                   Current status
                   in the source system
                    And Details Tab shows following Messages :
                    Overall Status : Missing Messages or warnings
                    Requests (Messages) : Everything OK
                            Data Request arranged
                            Confirmed with : OK
                     Extraction(Messages) ; missing messages
                            Data request received
                            Data selection scheduled
                            Missing message : Number of Sent Records
                            Missing message : selection completed
                    Transfer (IDOCS and TRFC) : Everything OK
                            Info Idoc1 : Application Document Posted
                            Info Idoc2 : Application Document Posted
                     Processing (data packet) : No data
                    This Process runs for infinite time, then I have to kill that process from server, & Then It shows Caller 09 Error in Status Tab
                    Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
                    Please, give your suggestion as early as possible, I m ewaiting for your reply.
Thanks,
Pankaj N. Kude

Error in using BAPI_CONFEC_CREATE : Interface data contains Errors

Hi,
I am using this BAPI BAPI_CONFEC_CREATE to create confirmations locally in SRM for a PO. I am following Documentation available for this BAPI. But when I excuted with below data getting error " INTERFACE DATA CONTAINS ERRORS"
I am passing these data:
Hedaer: Ref_doc_no - PO Number
              Description:
             Process Type: "CONF"
Header_cust: parent_guid : PO GUID
Item: Parent: PO Header GUID
        PO Number: PO number
        PO GUID: PO HEDAER GUD
        PO ITEM Number: PO item Number
       PO_ITEM_GUID: po item guid
Account:
               Parent_GUID : PO Item GUID
               G/L acct : Po G/l acct
               cost center : PO cost center
what are the data sholud be passed to this BAPI?
Am I missing any input data to this BAPI? Please let me know.
Am I using correct Function Module to create a confirmation for a PO in Stand alone scenario?
Thanks.
Shears
Edited by: Shears80 on Sep 10, 2010 1:39 AM

Hi Matt
I'm using the same FM but it's not working. Can you please share what data you are passing in the FM.
After debugging I found that my confirmation is getting created but it's not getting saved.
Please enlighten me.
Thanks
Ankit

Document Contains Errors - Approval not possible

Hi,
We are having issue in our Invoice Workflow.
When ever the approver is trying to approve the document, he is getting the error message "Document Contains Errors -> Approval not possible".
We have verified the document and check for error messages and found the below error messages on the Document.
E BBP_PD 047 Posting period 006 2011 is not open.
The document was submitted some time in the first week of December and as part of AP process the posting period will be closed during the first week of every month. This is a common business case and why is it stopping from posting the doc?
FYI..this Invoice is posted against the WBS element.
Pls give some insight on this and how to address the issue.
Regards,
Satya

Hi,
The posting date in the invoice is referring to the past period which is closed.You will have to change the invoice posting date to current period date and then process.
Regards,
Sanjeev

Interface data contains error

Hi Expert,
We're facing error 'interface data contains error' when generate Purchase Order for bid submitted by bidder.
anyone has experience with this error?
Thanks,
Yusup

Hi
Please refer this note 1042490 - Interface Data contains Errors in the sourcing cockpit.
This note might be useful for you.
Muthu

Call contained error(s): ADS (2)

Hi,
I have created a print form using transaction code SFP. while testing system giving me an error My form and interface showing active and no errors
<b>
Call contained error(s): ADS (2)
</b>
How to avoid this.
Sa_R

Hello,
are you sure that you have configured ADS on your J2EE engine?
Thank you for the information.
Best regards,
Dezso

Bid Response : Interface data contains errors

Hi Gurus
We have created a bid invitation ,the worflow is set on Without Approval . We are trying to create a bid response , after maintaining the bid , we select check and get the error " Interface data contains errors"
Does anyone know how to go about resolving this

Hi,
Have you implemented any BADI in your system?If yes,please check whether it is properly activated or not.The error log is due to the improper implementation of some badi.
for the time-being,
Try de-activating all the custom BADI Implementations and chek, what is happening, in the standard SRM system.
BR,
Disha.
Do reward points for useful answers.

Error-M2O-Settlement rule for assembly order for item...could not be genera

Hi,
When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
But while saving the sales order, the below error message is displaed:
Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                Yes/No
1. If No is choosen the following error message is displayed
       Error when processing Production order
      Error when processing Production order
      Message no. V1380
      Diagnosis
        A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the following meanings:
1 = External block, 2 = General error, 3 = Insufficient data for the interface, 4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued. Procedure: Inform your system administrator.
2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
"Distribution rule for Sales document item can only be created automatically Message no. KD063"
We are using the requierement class with below details:
Reqmts class: ZSO- for M2O
AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
Settlement profile contain:
Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
Need your valuable inputs to meet this requirement.
Let me know if you need any further details.
Thanks in advance.
Regards,
ADI

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

Upload from iAd Producer fails with error "The Ad contains an invalid banner type".

I worked half a day on an ad in iAd Producer, only to see it fails right after the upload with this error:
"The Ad contains an invalid banner type"
"iAd Workbench currently accepts standard banners. Remove all other banner types and try upload your banner again."
The error and the documentation give no hints on what these "standard banners" are exactly. My project is based on the Tap - Web iAd Blueprint, which requires a bunch of images to be created. I created all of these, regular images as jpeg, transparent images as png. At first the png's were normal (24-bit), but then I read in the help that 8-bit is required. Downgrading the png's to 8-bit didn't help to fix the error though. I also tried recreating the whole project, but it didn't help: same error.
Before the upload, I get this vague warning:
"Are you sure you want to upload your project with assets missing? There are 0 assets you haven't provided yet."
Sounds like a bug. This warning was there in my 1st and in my 2nd project, the 2nd one being the exact copy.
Finally I want to say that simulating in the simulator or Safari, or uploading to the sandbox works fine.
I'm using version 4.2 of iAd Producer on OS X 10.9.2.
Can anyone help me?
Has anyone been successful with the Tap - Web iAd Blueprint?

The Tap to Web blueprint for iPad contains banner types currently not supported in iAd Workbench. Delete the MRec and Full Page banners and you should be able to upload.
-Mark

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Run-time error '1004' -- Method 'Container' of object '_Workbook' failed

Dear All,
One of our users is getting the following Microsoft Visual Basic error while running the report S_ALR_87013614.
Run-time error '1004'
Method 'Container' of object '_Workbook' failed.
I have searched the forum posts for help. But I only found some details related to Run-time error 1004 related to some excel file security but not related to "Method 'Container' of object '_Workbook' failed".
Could anyone please tell me how this error can be eliminated for the user?
Regards,
Lakshmi.

Dear Arpan,
We too observed a few PIDs along with the one that you have mentioned but they make no difference. Some users who has the PID G_RW_DOCUMENT_TYPE set with some value are getting the report.
Upon further searching we are assuming that it could be an issue with the Microsoft applications or macro settings of the user. But not sure about it.
Regards,
Lakshmi Venigala.

Adding a window to a container: Error

Hello there,
Im facing a problem with my program.My program is about a Car Rental System and I am using GUI for the interface. From the main(CarRental) program,when user click one of the menu, there is another interface will appear for user to enter details.The problem is,my main (CarRental)program is running,click the first menu,then another interface open,but wen user enter details n click buttons , it is not even working. Below is my program:
//This is main menu program
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import javax.swing.JFrame;
public class CarRental extends JFrame implements ActionListener{
     JFrame f;
     JLabel l1,l2,l3,choice;
     JPanel p1,p2,p3,p4,p5,p6,p7,p8,p9;
     JButton btnA,btnB,btnC,btnD,btnE,btnF;
     Connection conn;
     Statement stmt;
     ResultSet rs;
     public CarRental(){
          p1=new JPanel();p2=new JPanel();p3=new JPanel();
          p4=new JPanel();p5=new JPanel();p6=new JPanel();
          p7=new JPanel();p8=new JPanel();p9=new JPanel();
          f=new JFrame("New Rental Record");
          l1=new JLabel("........::: Car Rental System :::.........");
          l2=new JLabel("*******************************************************");
          choice=new JLabel("Please select your option:");
          btnA=new JButton("[1] New Rental Record");
          btnB=new JButton("[2] Update Rental Record");
          btnC=new JButton("[3] Search Rental Record");
          btnD=new JButton("[4] Delete Rental Record");
          btnE=new JButton("[5] Display Rental record");
          btnF=new JButton("[6] Exit");
          l3=new JLabel("*******************************************************");
          f.setLayout(new GridLayout(10,1));
          f.pack();
          f.setVisible(true);
          f.setSize(350,500);
          f.setBackground(Color.white);
          p1.add(l1);f.add(p1);
          p2.add(l2);f.add(p2);
          p3.add(choice);f.add(p3);
          p4.add(btnA);f.add(p4);
          p5.add(btnB);f.add(p5);
          p6.add(btnC);f.add(p6);
          p7.add(btnD);f.add(p7);
          p8.add(btnE);f.add(p8);
          p9.add(btnF);f.add(p9);
          btnA.addActionListener(this);
          btnB.addActionListener(this);
          btnC.addActionListener(this);
          btnD.addActionListener(this);
          btnE.addActionListener(this);
          btnF.addActionListener(this);
     f.addWindowListener(new WindowAdapter(){
               public void windowClosing(WindowEvent e)
                    {System.exit(0);}});
          public void actionPerformed(ActionEvent e){
                    if(e.getSource()== btnA)
                    {     NewRecord nr=new NewRecord();}
                     else if(e.getSource()== btnB)
                    {     updateRecord ur=new updateRecord();}
                    else if(e.getSource()== btnC)
                    {     searchRecord sr=new searchRecord(); }
                    else if(e.getSource()== btnD)
                    {     deleteRecord dr=new deleteRecord(); }
                    else if(e.getSource()== btnE){
                         try{
                              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                         catch(ClassNotFoundException e3) {
                              JOptionPane.showMessageDialog(null,"ERROR:"+e3.getMessage());
                         try{
                              conn=DriverManager.getConnection("Jdbc:Odbc:Car Rental", "", "");
                              stmt=conn.createStatement();
                              rs=stmt.executeQuery("Select * from Customer where CustID");
String s=("CustID:   CustName:    CustAdd:          CustPhone:       No.of days rent:     Rate per rental: \n");
while(rs.next())
s=s+rs.getString(1)+"             "+rs.getString(2)+"              "+rs.getString(3)+"              "+rs.getString(4)+"                    "+rs.getString(5)+"                     "+rs.getString(6)+"\n";
                                   JOptionPane.showMessageDialog(null,s);}
catch(SQLException e4){e4.printStackTrace();}}//end of F
//to exit the program
else if(e.getSource()== btnF){
JOptionPane.showMessageDialog(null,"Thank you");System.exit(0);}
else
JOptionPane.showMessageDialog(null,"Invalid Option!");System.exit(0);
               }//end of if statement
public static void main(String args[]){
          CarRental cr= new CarRental();}//end of main
}//end of main menu
//New Rental program when user selects it
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class NewRecord extends JFrame implements ActionListener{
     JFrame f;
     Container c;
     FlowLayout layout;
     JLabel l1,l2,custId,custName,custAdd,custPhone,dayRent,rateRent;
JTextField tid,tname,tphone,tday,trate;
                              JTextArea tadd;
                              JButton save,clear,exit;
                              Connection conn;
                              Statement stmt;
                              ResultSet rs;
                              JPanel p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11;
                         public NewRecord(){
                            //super("New Record");
                              layout = new FlowLayout();
                              c=getContentPane();
                              c.setLayout(layout);
                              p1=new JPanel();p2=new JPanel();p3=new JPanel();
                              p4=new JPanel();p5=new JPanel();p6=new JPanel();
                              p7=new JPanel();p8=new JPanel();p9=new JPanel();
                              p10=new JPanel();p11=new JPanel();
                              f=new JFrame();
                              l1=new JLabel("........::: New Rental Record :::.........");
                              l2=new JLabel("*******************************************************");
                              custId =new JLabel("Customer ID:");
                              custName=new JLabel("Customer name:");
                              custAdd=new JLabel("Customer address:");
                              custPhone=new JLabel("Customer phone:");
                              dayRent=new JLabel("Days of rental:");
                              rateRent=new JLabel("Rate per rental:");
                              tid= new JTextField(10);
                              tname=new JTextField(10);
                              tphone=new JTextField(10);
                              tadd=new JTextArea(4,30);
                              tday=new JTextField(5);
                              trate=new JTextField(10);
                              save=new JButton("SAVE");
                              clear=new JButton("CLEAR");
                              exit=new JButton("EXIT");
                              f.setLayout(new GridLayout(11,1));
                              f.setBackground(Color.white);
                              f.setVisible(true);
                              f.setSize(600,600);
                              p1.add(l1);f.add(p1);
                              p2.add(l2);f.add(p2);
                              p3.add(custId);p3.add(tid);f.add(p3);
                              p4.add(custName);p4.add(tname);f.add(p4);
                              p5.add(custAdd);p5.add(tadd);f.add(p5);
                              p6.add(custPhone);p6.add(tphone);f.add(p6);
                              p7.add(dayRent);p7.add(tday);f.add(p7);
                              p8.add(rateRent);p8.add(trate);f.add(p8);
                              p9.add(save);f.add(p9);
                              p10.add(clear);f.add(p10);
                              p11.add(exit);f.add(p11);
                         /*     f.add(l1);
                              f.add(l2);
                              f.add(custId);
                              f.add(tid);
                              f.add(custName);
                              f.add(tname);
                              f.add(custAdd);
                              f.add(tadd);
                              f.add(custPhone);
                              f.add(tphone);
                              f.add(dayRent);
                              f.add(tday);
                              f.add(rateRent);
                              f.add(trate);
                              f.add(save);
                              f.add(clear);
                              f.add(exit);*/
                              c.add(f);
                              save.addActionListener(this);
                              clear.addActionListener(this);
                              exit.addActionListener(this);
                              f.addWindowListener(new WindowAdapter(){
                              public void windowClosing(WindowEvent e)
                                   {System.exit(0);}});
                         public void actionPerformed(ActionEvent e){
                              if(e.getSource()== exit)
                                   {System.exit(0);}
                              if(e.getSource()== clear){
                                   tid.setText("");
                                   tname.setText("");
                                   tadd.setText("");
                                   tphone.setText("");
                                   tday.setText("");
                                   trate.setText("");}
                              if(e.getSource()== save){
                                   try{
                                        Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                                   catch(ClassNotFoundException e1) {
                                        JOptionPane.showMessageDialog(null,"ERROR:"+e1.getMessage());
                                   try{
                                        conn=DriverManager.getConnection("Jdbc:Odbc:Car Rental", "", "");
                                        stmt=conn.createStatement();
                                        rs=stmt.executeQuery("Select * from Customer");
                                        while(rs.next()){
                                        tid.setText(rs.getString(1));
                                        tname.setText(rs.getString(2));
                                        tadd.setText(rs.getString(3));
                                        tphone.setText(rs.getString(4));
                                        tday.setText(rs.getString(5));
                                        trate.setText(rs.getString(6));}
                                        String s=("CustID:   CustName:    CustAdd:          CustPhone:       No.of days rent:     Rate per rental: \n");
                                        while(rs.next())
                                        s=s+rs.getString(1)+"             "+rs.getString(2)+"              "+rs.getString(3)+"              "+rs.getString(4)+"                    "+rs.getString(5)+"                     "+rs.getString(6)+"\n";
                                             JOptionPane.showMessageDialog(null,s);
                                   catch(SQLException e2){
                                             e2.printStackTrace();
                         public static void main(String args[]){
                                   NewRecord nr=new NewRecord();
                              //     nr.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                                   }//end of newRecord class
                              }//ends of New rental program
I tried to use extending to JPanel or JApplet but still the same. Any help??

Hi,
In the NewRecord java file, use change the
f = new JFrame();
c = f.getContentPane();, after that all panel add into the container
p1.add(l1);c.add(p1);
p2.add(l2);c.add(p2);
p3.add(custId);p3.add(tid);c.add(p3);
p4.add(custName);p4.add(tname);c.add(p4);
p5.add(custAdd);p5.add(tadd);c.add(p5);
p6.add(custPhone);p6.add(tphone);c.add(p6);
p7.add(dayRent);p7.add(tday);c.add(p7);
p8.add(rateRent);p8.add(trate);c.add(p8);
p9.add(save);c.add(p9);
p10.add(clear);c.add(p10);
p11.add(exit);c.add(p11);and finally remove this line below
//c.add(f);Try to avoid add frame into the container, or else you will receive adding a window to a container error.
Rgrds,
Sen
Message was edited by:
arjensen

Error: Maintain settlement rule of the sender for a higher level WBS

Hi,
I dont want to maintain the settlement rule for a higher level WBS. How can i configure this in such a way that i dont get the following error:" Maintain settlement rule of the sender" while doing CJ88. Maintaing a separate Settlement profile for a higher level WBS is an option but we are looking if something else could be done The problem is that there are no actuals booked against, say, level 2 WBS but when i execute CJ88, i get the aforesaid error. How can i ensure that only the lowest level WBS ask for the settlement rule and not the levels above it. I have already removed the Investment profile from the higher level WBS but still getting the same error.
Regards,
DPil

Hi,
It is a type Capex WBS and Biling element is not checked. In fact i get a warning while doing the settlement: WBS is neither a billing element nor an account assignment element.
Diagnosis
WBS element is not indicated as either an account assignment element or as a billing element in the master record.
System Response
The WBS element cannot be assigned to an account.
Procedure
Correct your entries or add the missing indicator to the master record for the WBS element.
But this is just a warning. On pressing enter i get the error :Maintain settlement rule of the sender "

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

TRIP error - simulated settlement contains errors

Similar Messages

Maybe you are looking for