Trip request creation date

Which table should be reffered to get the trip request creation date???

Hi,
I think it's PTRV_PERIO
Regards

Similar Messages

  • Transport request creation date

    Hi Experts,
      How can I find creation date of a transport request. I am able to find the last changed date only. Is there any function module or table to find out the transport request creation date.
    Thanks in advance,
    Venkat

    HI
    Check in the table E071, search entries with TR number, and in the results the column OBJ_NAME will have creation date and time.
    Here you get all the details related to the TR.
    Or you can also go to se16 and and give the wild card E* and those are almost related to Transports table.
    Hope this may be help ful to you
    Many thanks
    kiran

  • GRC 10.0 Access Request Creation- Data Source of User Details

    Hi Experts,
    I was doing GRC 10.0 Configuration and found a query which I am not able to resolve.
    While creation of any kind of Access Request in GRC through NWBC> Acces Management Tab>Access Request>Access Request Creation.
    In the user details section, I can see the HR records( like Pernr, position, manager) have been visible to some extent.
    My question is where from these details came in GRC. What configuration we should maintain to achieve these HR records?
    Hope to get a quick response as this is one of the requirement of the implementation which I am doing with my customer.
    Thanks,
    Atanu

    Alessandro,
    Thanks for your response. It helped me to know certain things.
    But when I am navigating to SPRO > GRC > Access Control > Maintain Data Sources Configuration > [User Detail Data Source], it is configured with a ECC system in target connector and User data type is maintained as "SU01".
    Now my question is where from in my case the GRC is pulling the HR records (PA20) like PERNR, POSITION,PERSONEL AREA etc? SU01 does not provide these information. My ECC box is integrated with HR module, so is it taking the data from HR directly?
    Thanks in advance!
    Atanu

  • Problems to trigger workflow in Trip Request Creation

    Hi masters,
    I am having problems to trigger a workflow for Travel Requests in FI-TV module. When I save a Trip Request and go to SWEL transaction, there is a message saying: "No recipient found" or something like this. I am not finding anything to solve this problem.
    Anyone can help me?
    Thank you very much!!!
    Diogo...

    Hello,
    "No recipient found" means an event had no matching workflow in SWE2.
    Look in SWEL to see which event you're actually generating and then look it up in SWE2 to see if there is a matching workflow for that object/event combination.
    regards
    Rick Bakker
    Hanabi Technology

  • How to find the creation date for a released requests..

    Hi friends ,
    In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
    So how to find the creation date for a released requests. Iam waiting for ur inputs..
    Thanks in advance..

    hi,
    Did u found the way to get the request creation date?
    I also need the same information.
    This needed for audit purpose........so it is must.
    Please help me in this.
    Best regards,
    vinod

  • Creation date for released transport request

    Hello everybody!
    Does anyone know how to find the CREATION date for a released transport request? I've already checked table E070CREATE and it only has entries for modifiable requests.
    Best regards,
    Luís Andrade.

    I think transport is released date field in E070 is overwritten with the releasing date.
    a®

  • Bulk request for query creation date

    Hello community,
    I have a list of technical names for 300+ queries, and I've been asked to provide the creation date for each one.
    I can find the creation dates one at a time using the BEx query properties.  But can someone tell me which table of the database this information is stored in ?
    I would like to run a single search and pull the creation date for all 300+ queries at one time.
    Thanks!
    Take care.
    Keith

    hi,
       hope this link will help
    http://help.sap.com/saphelp_erp2005/helpdata/en/85/44df3d0eb8af5ee10000000a114084/frameset.htm
    regards
    Varun

  • How to Check product warranty in CRM based on R/3 invoice creation date

    Dear all,
    As per our client business process, for a sales product warranty starts once after creation of Invoice in ECC system. in that case, how to perform warranty check in CRM Complaints based on ECC Invoice creation date.
    Please suggest me the standard SAP solution for this. Your help will be highly appreciated
    Regards
    Raghu ram
    Edited by: Raghu Ram on Jan 11, 2010 7:24 AM

    Hi Raghu,
    This is pure development. But it is possible.
    You need to use a function module to create warranty contract in CRM against to ECC invoice with the following prerequisites
    1. Same SLA should be available in both ECC and CRM (In ECC there is no SLA concept, in that case u need to maintain SLA as text component in delivery/sales order or any Z transaction document, the same can be pulled into CRM warranty contract)
    2. All the products sold in ECC should be having serial number during delivery process. Then the combination of product and serial number will be created an equipment master in ECC. This equipment master should be replicated to CRM as and when it is created in ECC.
    3. The partners in equipment master should be same as in invoice or sales order document in ECC
    4.  Addiitionally, all the products in the ECC invoice to be replaced as service material with SCN item category (We used this logic), so you can use any other logic to get service line item. You can use any common service material also as line item.
    5. Male the status profile settings to release the contract once it is created and saved in CRM
    6. In the complaint or service request document, set the contract determination as Unique number (I think "D")
    As standard, You can create wrranty contract and assign warranty master as and when ECC invoice is created by manual method.
    Hope this development logic will be useful.
    Regards,
    Ram.

  • GRC 10.0: Access Request Creation - LDAP user advanced search not working

    Dear Experts,
    We are implementing SAP GRC Access Control and we have an issue in Access Request Creation. If we put the user name in “User” field and press intro, the user details are updated, but if we want to make an "Advanced search" the user is not found and the application give us the following message: “No records found for the search criteria entered.”
    Scenario 1: If we put the user name in “User” field and press intro, the user details are updated:
    Scenario 2: If we want to make an "Advanced search" the user is not found and the application give us the following message: “No records found for the search criteria entered.”
    We are using the Active Directory as Data Source.
    Thanks and Regards.

    Hi Jose,
    Try maintaning the parameter 2050 as YES and check once.
    Kindly, also make refer to  the below list of SAP notes:
    1757906 - GRC 10.0 - LDAP user search does not work in NWBC
    1745370 - LDAP search in GRC does not work anonymously
    1718242- UAM: User search not working in Access Request.
    Regards,
    Neeraj Agarwal

  • Request creation error for mitigation control workflow

    Dear Expert,
             I had activiate the workflow from RAR to CUP on Mitigated User assignment, I had completed following customizing:
    1)RAR->configaration->Workflow
    2)CUP->configaration->initiator, stage, path.
    but when I created mitigated user assignments in RAR, after click "Submit", error popup: "Request creation error"
    can some one help?
    thanks!

    Dear,
         the log is below:
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: END POOINT URL: http://9.186.143.129:50100/AEWFRequestSubmissionService_5_2/Config1?style=document
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: before submit:
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: wftype: MITIOBJ reqid: GRC01
    May 20, 2010 2:10:50 PM com.virsa.cc.rulearchitect.dao.dto.MitObjDTO getObjContext
    FINEST: validfrom: 2010-05-20 validto: 2011-05-20
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: MITREFNO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MOMITREFNO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: CT01
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: RISKID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MORISKID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: ZC02
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: LANG
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: LANG
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: EN
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: MONITORID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MONITORID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: GRC01
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: Integer
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: STATUS
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MOSTATUS
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 0
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: DATE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: VALIDFROM
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: VALIDFROM
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 05/20/2010
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: DATE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: VALIDTO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: VALIDTO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 05/20/2011
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: BU ID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: BUID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: null
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: Approver ID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MOAPPROVERID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: null
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: OBJTYPE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: OBJTYPE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: U
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: OBJID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: OBJID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 207471
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: Return code: 2010 Message: com.virsa.ae.core.ObjectNotFoundException: Invalid Priority Value : MO_HIGH workflow id: null Status: null
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    WARNING: 2010: null

  • CfTE: Itinerary details in a Trip Request.

    Hello Colleagues,
    There are some requirements to include itinerary segments while creating a trip request itself, for India.
    Question1: An employee should be able to enter his trip details while he/she requests for a trip.
    However, we are already aware about filling additional details when we claim an expenses. Additionally, we want to have the same itinerary segments while creating a trip request.
    As an instance, an employee travels to Delhi via flight and then he boards a bus to Gurgaon. Finally, he takes train to return back to Bangalore.
    In this case, he uses different modes of transports to different locations.
    Can we capture additional destinations travelled in trip request along with different modes of transport?
    Question2: Currently data do not flow from a trip request to an expense report. Can we have most of the data filled when we claim an expense report from a particular trip request? Like, dates of travel, purpose of the trip, etc.
    Kindly assist in achieving the same.
    Thank You!
    Best Regards,
    Divya

    Hi Divja,
    1) I am not sure on your sequence of process steps, so please be kind and check with your prospect or customer on the detailed flow of data steps. Does he want to have Itineraries to be processed before the Travel Request? Also if this is a new requirement it would be good if your prospect can leverage our idea scale platform as input channel so we can channel all ruequirments thoroughly.
    2) Please create an incident as approved trip request usually pass over trip header data to the Expense Reports.
    Kind Rgds, Oliver

  • Travel request is created for multiple employee or multiple trip request

    Hi Experts,
    In our current application for creating Travel Request in offline scenario we are using function module  'FITP_CREATE_TRIP_FROM_REQUEST' to create the travel header data and 'FITP_UPDATE_REQUEST' to generate the line data.
    We are calling these two function modules from a report which is executed in background.
    The function modules are working fine single employee Id with single Trip request , but in case of single employee id having multiple Trip request or Multiple employee id ,each having  single trip request  , only the first trip is created properly and for all the successive trip we are getting an exception
    ' No trip data could be found for selected criteria'.
    What is the way to overcome the issue?
    please help.
    Thanks and Regards,
    Anirban B

    Hello,
    I am getting similar kind of issue please help me how you have solved this issue
    I will be really helpful if you respond
    Thanks and Regards
    Sarthak Arora

  • Can we restrict or disabale approve trip request while creating expense .

    Hi Guru ,
    we are using EHP4 and ECC6 . My client has a requirement ,the scenario is as follows
    "Using ESS an employee creates a travel request  and then get approvels from their managers , it is working fine . But when employee creates an expense report against the trip number then at this stage system allowing to change the trip data as well .
    My question is can we restrict or disable the trip request data so that user can not make changes .
    Please reply it ASAP , as it is an urgent query.
    Regards
    Sadia

    you can do on basis of authorisation objects
    http://help.sap.com/erp2005_ehp_02/helpdata/en/b6/cda0db49e911d189060000e8322f96/frameset.htm
    or folllow here
    Travel Expense Report for Unapproved Travel Request
    and
    "TRIP_WEB_CHECK should be implemented

  • Shipping point , delivery creation date

    Hi :
      I have a custom table with fields :
    belnr, posnr, btyp, aufnr, ebeln, ebelp, livbeln, liposnr,matnr,wadat,kunnr,werks,bmeinh,getri,inaktiv,wabukz,erdat,aedat,loekz.
    Custom Transaction with fields :
    vbeln (field name belnr) , aufnr, delivery vbeln ( field name livbeln ),werks, mat .avail.dat (  mbdat ), transport.plan date(tddat),
    matnr, and sales order item (posnr).
    I have to select sales order , item from custom table based on plant (werks) shipping point , and delivery creation date.
    how can i relate shipping point and delivery creation date to my query.
    For delivery creation date, it should be selected based on current date+-2 and should choose MBDAT OR TDDAT which ever is earlier based on current date.
    I would appreciate if anyone can give me som idea and full points r rewarded.
    Thx.
    Rag

    Hi Pankaj,
    Please try to use BAPI 'BAPI_DELIVERYPROCESSING_EXEC' for creating delivery form sales order , you can pass value and create delivery.
    you can refer below code, it may be helpfull for you to create delivery.
    DATA: BEGIN OF t_vbap OCCURS 0,
            vbeln LIKE vbap-vbeln,
            posnr LIKE vbap-posnr,
      zmeng LIKE vbap-kwmeng,
            matnr  LIKE vbap-matnr,
            werks  LIKE vbap-werks,
          END OF t_vbap.
    DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
          WITH HEADER LINE.
    DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
          WITH HEADER LINE.
    DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    SELECT vbeln posnr zmeng matnr werks
           INTO TABLE t_vbap
           FROM vbap
           WHERE vbeln = v_vbeln.
    LOOP AT t_vbap.
      t_request-document_numb = t_vbap-vbeln.
      t_request-document_item = t_vbap-posnr.
      t_request-quantity_sales_uom = t_vbap-zmeng.
      t_request-quantity_base__uom  = t_vbap-zmeng.
      t_request-id = 1.
      t_request-document_type = 'A'.
      t_request-delivery_date      = sy-datum.
      t_request-material = t_vbap-matnr.
      t_request-plant = t_vbap-werks.
      t_request-date = sy-datum.
      t_request-goods_issue_date = sy-datum.
      t_request-goods_issue_time = sy-uzeit.
      APPEND t_request.
    ENDLOOP.
    CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
         TABLES
              request      = t_request
              createditems = t_created
              return       = t_return.
    READ TABLE t_return WITH KEY type = 'E'.
    IF sy-subrc = 0.
      MESSAGE e208(00) WITH 'Delivery creation error'.
    ENDIF.
    COMMIT WORK.
    Regards,
    Prasenjit

  • SORT BY CREATION DATE   failure

    HI,
    I've got 11K photos in a folder. When I open the folder I see all the photos. All the photos have the correct creation date imbedded in the RAW file as indicated by the GET INFO pop up.   In spite of this the View>Sort by> Creation Date  request is not resulting in the photos getting sorted correctly with oldest first and most recently taken last. Any idea what is going on here?  It has worked before correctly.  Thanks.

    There is a sort by "capture time", which I use also. There are also some problems with it, but it works well enough for my needs.
    One of the other users of this forum, Bogdan, explained in an earlier thread that one reason that LR doesn't recognize some dates is that those dates were created by software that doesn't form them according to proper standards.
    Do a forum search on "Exifer" for more commentary and suggested remedies.
    Best of Luck!

Maybe you are looking for