Triple 2560*1440 monitor setup on W530 + dock station + win8

I have:
W530 (K1000M) upgraded to Win8
Mini Dock Plus Series 3 with USB 3.0 - 170W (US/Can/LA)
Will it be possible to connect 3 27 inches monitors with resolution of 2560*1440?
Will laptop support such huge resolution (7680*1440 totally)?
Thanks

as far as I remember dock station spec states that it supports up to 4 monitor.
how they supposed to be connected then?
because again afair i can't use displayport and dvi at the same time
probably somethink like that supposed to be used http://www.matrox.com/graphics/en/products/gxm/th2go/displayport/?productTabs=1 ?
it is not convinient to use minidp of laptop as I need ability to free dock/undock laptop.

Similar Messages

  • W530 docking station supporting 4k monitor?

    Hello,
    I have googled for quite a while now without luck. It seems to me that the most advanced docking station for the W530 is the "Mini Dock Plus Series 3 with USB 3.0 - 170W" which only supports a maximum resolution of 2560x1600 from its display ports according to this German webpage: http://www.notebooksbilliger.de/lenovo+thinkpad+mini+dock+plus+series+3+usb+30+0a65699.
    Anybody know of a docking station for the W530 (244723U model) that supports 4k? 
    Regards,
    Håkan

    Hello,
    I have this question too. I'm planning to buy Asus 4K monitor and not sure, whether it will work via DP on my docking station.
    Thanks.

  • Dual monitor setup with Docking station and W500 on windows 8

    Hi there
    I have a w500 with ATI Radeon 3650
    Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now.
    Any solutions out there? I don't care about catalyst control center, or which drivers I have to use, just give me back my two monitors connected to a docking station

    I have the same W500 setup and have had no luck finding Windows 8 drivers on Lenovo's site or AMD's. I have a support ticket in to Lenovo to see what they come up with. I have two flat panel monitors that I need to work. According to  MS, Catalyst Control Center has compatibility issues with Win8. It was easy to set up both monitors under Win7 with CCC. I have not been able to set them up using Windows display setting in Control Panel. Does anyone out there know of an app that I can use to replace CCC and run two monitors?
    kb5

  • T61 with Docking Station: can it handle two 21" external Monitors?

    Hi
    I would like to know if somebody knows if the T61 laptop grafic card can handle two 21" monitors attached at the docking station. Our internal IT guys are confirming two 19" are fine, but they do not know about two 21".
    thanks
    GC

    If I remember correctly, you have the Intel-graphics-chip, and the docking/chip-combo does not support the dual-monitor setup via both VGA + DVI. You should be able to get image on the laptop-screen and the DVI output, I think?
    IT-technician, running my own company in Bergen, Norway
    Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

  • T43 w/ Port Rep II - Dual External Monitor Setup

    Hi,
    I have a T43 with the ATI chipset.  I am running it in a dual monitor configuration with the laptop LCD and an external monitor connected to the docking station.  I would like to use 2 external monitors via the docking station's VGA and DVI connectors but I can't figure out how to get the system to switch from the laptop LCD to the DVI.  Is this possible?  If so, how do I do it?
    I'm running XP.
    Much thanks for any help!
    Fred
    Solved!
    Go to Solution.

    go into your bios, select vga+dvi+internal screen. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • W540 + Dock station (40A20170EU), Audio and HDMI problems - SOLVED

    Hello,
    I have recently bought your dock station (40A20170EU) and as soon as I started using it the problems began:
     - Audio jack on the dock is not working and is emitting static.
     - As soon as I connect a display via HDMI port (on the dock station) my laptop display starts flickering (the display was tested on the PC and works).
    I have updated the dock firmware to 2.21.000, nothing changed. 
    PS. The second monitor running from the docking stations display port is working fine. 
    I need your help! 
    Thank you!

    SOLVED.
    1) Removed all display drivers.
    2) In BIOS I changed the display setting from standard to advanced.
    3) Reinstalled all the display drivers.
    4) Reconnect the HDMI monitor and now it’s working.
    5) WINNING J
    Thanks anyway.

  • [Solved] gs60 ghost pro triple monitor setup??

    any one try to put a display port hub on the gs60 ghost pro something like the 3d-club MST
    link: http://www.club-3d.com/index.php/products/reader.en/product/mst-hub-1-3.html
    i have a triple monitor setup for my desktop machine and i was wondering if it is possible to just plug my gs60 into a USB hub for sound, keyboard, and mouse. then a MST display port hub just dock and game. from what i read online the GTX 870M will work in this configuration i just want to know if anyone here has tried it?

    Quote from: Yippyyay;104043
    any one try to put a display port hub on the gs60 ghost pro something like the 3d-club MST
    link: http://www.club-3d.com/index.php/products/reader.en/product/mst-hub-1-3.html
    i have a triple monitor setup for my desktop machine and i was wondering if it is possible to just plug my gs60 into a USB hub for sound, keyboard, and mouse. then a MST display port hub just dock and game. from what i read online the GTX 870M will work in this configuration i just want to know if anyone here has tried it?
    Yes, it works.

  • Question about dual-monitor setup - advanced dock + PCIe card

    I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got:
    Primary monitor: Acer AL2416W (1920x1200 DVI)
    Secondary monitor: Dell 1901FP (1280x1024 VGA)
    I've read that the advanced dock might be able to let me use this setup with the Z60t if i put a PCIe video card in it. So here are my questions:
    1. Will the advanced dock + PCIe video card allow me to run the two monitors listed above (I don't use the laptop screen at all)?
    2. Which PCIe cards are compatible with the advanced dock?
    3. Can I achieve the same resolutions with the advanced dock + PCIe card?
    4. Will I need to split the VGA output, or can i use VGA + DVI like I do now (since the Z60t has no native DVI support)?
    thanks!

    Gary -- don't turn on the OS Display Mirroring.  Turn it off.
    You want Aperture to control how it uses your dual monitors.  (You do not want the OS to determine it.)
    Once you've turned off the OS "Display Mirroring", the set-up I specified above should give you what you want.
    That set-up is:
    "View → Main Viewer → {anything}", and
    "View → Secondary Viewer → Alternate"
    You must have the Viewer active (not the Browser) in order to change the "Secondary Viewer" setting.  If you are in the Browser, activate the Viewer by double-clicking an Image.
    Let me know if that doesn't work.

  • MacPro3,1 triple monitor setup

    Hi there!
    I'm looking to expand my Apple 30" monitor setup with two (very cheap but highly acclaimed) Dell UltraSharp™ U2311H monitors. However, I'm unsure if I do or do not need an additional video card and if so, which one. I have an NVIDIA GeForce 8800 GT with (I think) two DVI-I Dual Link ports. I've read that there are DVI-splitters, but I have been unable to find any conclusive information.
    Does anyone know how I can do this?
    Friendly greetings, D, Amsterdam.

    Hi Grant!
    Thanks for your help earlier ;-)
    I hope you might be able to shed some light on a little problem I have with my triple monitor setup. I bought the following items:
    Two Dell Professional P2411H 61cm (24") LED monitors.
    Two MiniDisplayPort to DVI adapters.
    I've took your advice on the card and also got one ATI RADEON HD 5770 1GB-ZML card.
    The monitors, in combination with the adapters and the card ... it all works, but there's one limitation I believe shouldn't be there.
    The problem is this: either the hardware or software is only allowing me to connect two displays in total. If I connect all three displays, only the Dell monitors are able to connect. If I disconnect one Dell monitor, the Apple 30" display goes live. So, whatever in whatever combination or order I try to connect the displays, only two screens are connecting simultaneously.
    Do you, or does someone else know how to fix this? Would be great to fix this soon and become the pixonaut of my own digitale cockpit!

  • HP Zbook 15, external monitor connected to docking station issue

    Dear all
    I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station. 
    After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
    "If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
    Best regards,
    Murtaza
    I did not find a way to attach the log file, so I put it here:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
    [ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
    [ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
    [ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
    [ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
    [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
    [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
    [ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
    [ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
    [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
    [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
    [ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
    [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
    [ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
    [ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x449fffff] page 2M
    [ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
    [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
    [ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
    [ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
    [ 0.000000] ACPI: FACS 0000000045e31000 000040
    [ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
    [ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
    [ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
    [ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
    [ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
    [ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
    [ 0.000000] On node 0 totalpages: 4143388
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 4334 pages used for memmap
    [ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
    [ 0.000000] Normal zone: 60344 pages used for memmap
    [ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
    [ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
    [ 0.000000] Offload RCU callbacks from all CPUs
    [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
    [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 66584576 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.008000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.008000] tsc: Detected 2693.754 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000024] Security Framework initialized
    [ 0.000038] AppArmor: AppArmor initialized
    [ 0.000039] Yama: becoming mindful.
    [ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004573] Initializing cgroup subsys memory
    [ 0.004578] Initializing cgroup subsys devices
    [ 0.004579] Initializing cgroup subsys freezer
    [ 0.004581] Initializing cgroup subsys blkio
    [ 0.004582] Initializing cgroup subsys perf_event
    [ 0.004584] Initializing cgroup subsys hugetlb
    [ 0.004602] CPU: Physical Processor ID: 0
    [ 0.004603] CPU: Processor Core ID: 0
    [ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.005456] mce: CPU supports 9 MCE banks
    [ 0.005469] CPU0: Thermal monitoring enabled (TM1)
    [ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    [ 0.005479] tlb_flushall_shift: 6
    [ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
    [ 0.006826] ACPI: Core revision 20131115
    [ 0.015427] ACPI: All ACPI Tables successfully acquired
    [ 0.015707] ftrace: allocating 31443 entries in 123 pages
    [ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.067065] TSC deadline timer enabled
    [ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067078] ... version: 3
    [ 0.067079] ... bit width: 48
    [ 0.067079] ... generic registers: 4
    [ 0.067080] ... value mask: 0000ffffffffffff
    [ 0.067081] ... max period: 0000ffffffffffff
    [ 0.067082] ... fixed-purpose events: 3
    [ 0.067082] ... event mask: 000000070000000f
    [ 0.068367] x86: Booting SMP configuration:
    [ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.166721] x86: Booted up 1 node, 8 CPUs
    [ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
    [ 0.174163] devtmpfs: initialized
    [ 0.177951] EVM: security.selinux
    [ 0.177953] EVM: security.SMACK64
    [ 0.177953] EVM: security.ima
    [ 0.177954] EVM: security.capability
    [ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
    [ 0.178592] pinctrl core: initialized pinctrl subsystem
    [ 0.178637] regulator-dummy: no parameters
    [ 0.178663] RTC time: 20:49:45, date: 04/17/15
    [ 0.178689] NET: Registered protocol family 16
    [ 0.178764] cpuidle: using governor ladder
    [ 0.178766] cpuidle: using governor menu
    [ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.178796] ACPI: bus type PCI registered
    [ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.194702] PCI: Using configuration type 1 for base access
    [ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.194963] mtrr: corrected configuration.
    [ 0.195520] bio: create slab <bio-0> at 0
    [ 0.195643] ACPI: Added _OSI(Module Device)
    [ 0.195645] ACPI: Added _OSI(Processor Device)
    [ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.246512] ACPI: Dynamic OEM Table Load:
    [ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.250664] ACPI: Dynamic OEM Table Load:
    [ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 0.254498] ACPI: Dynamic OEM Table Load:
    [ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 2.268291] ACPI: Interpreter enabled
    [ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 2.268314] ACPI: (supports S0 S3 S4 S5)
    [ 2.268315] ACPI: Using IOAPIC for interrupt routing
    [ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.268475] ACPI: No dock devices found.
    [ 2.270541] ACPI: Power Resource [APPR] (off)
    [ 2.287340] ACPI: Power Resource [COMP] (on)
    [ 2.287629] ACPI: Power Resource [LPP] (on)
    [ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 2.298295] PCI host bridge to bus 0000:00
    [ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
    [ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    [ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    [ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
    [ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
    [ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
    [ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
    [ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
    [ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
    [ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
    [ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
    [ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
    [ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
    [ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
    [ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
    [ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
    [ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
    [ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
    [ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
    [ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
    [ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
    [ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
    [ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
    [ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
    [ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
    [ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
    [ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
    [ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.306776] acpiphp: Slot [1] registered
    [ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.306850] acpiphp: Slot [1-1] registered
    [ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
    [ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
    [ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
    [ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
    [ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
    [ 2.315269] pci 0000:5d:00.0: supports D1 D2
    [ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
    [ 2.324298] Found 1 acpi root devices
    [ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 2.324522] vgaarb: loaded
    [ 2.324523] vgaarb: bridge control possible 0000:01:00.0
    [ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
    [ 2.324635] SCSI subsystem initialized
    [ 2.324664] libata version 3.00 loaded.
    [ 2.324678] ACPI: bus type USB registered
    [ 2.324688] usbcore: registered new interface driver usbfs
    [ 2.324693] usbcore: registered new interface driver hub
    [ 2.324707] usbcore: registered new device driver usb
    [ 2.324786] PCI: Using ACPI for IRQ routing
    [ 2.330294] PCI: pci_cache_line_size set to 64 bytes
    [ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
    [ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
    [ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
    [ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
    [ 2.330402] NetLabel: Initializing
    [ 2.330403] NetLabel: domain hash size = 128
    [ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
    [ 2.330412] NetLabel: unlabeled traffic allowed by default
    [ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 2.332489] Switched to clocksource hpet
    [ 2.335878] AppArmor: AppArmor Filesystem Enabled
    [ 2.335891] pnp: PnP ACPI init
    [ 2.335898] ACPI: bus type PNP registered
    [ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
    [ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336141] pnp 00:01: [dma 4]
    [ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
    [ 2.336353] system 00:06: [io 0xffff] has been reserved
    [ 2.336354] system 00:06: [io 0xffff] has been reserved
    [ 2.336355] system 00:06: [io 0xffff] has been reserved
    [ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
    [ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
    [ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
    [ 2.336939] pnp 00:0a: [dma 0 disabled]
    [ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
    [ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
    [ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
    [ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
    [ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 2.337398] pnp: PnP ACPI: found 15 devices
    [ 2.337399] ACPI: bus type PNP unregistered
    [ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
    [ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
    [ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
    [ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
    [ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
    [ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
    [ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
    [ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
    [ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
    [ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
    [ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
    [ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
    [ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
    [ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
    [ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
    [ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343341] NET: Registered protocol family 2
    [ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
    [ 2.343782] TCP: reno registered
    [ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343907] NET: Registered protocol family 1
    [ 2.343916] pci 0000:00:02.0: Boot video device
    [ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
    [ 2.344387] PCI: CLS 64 bytes, default 64
    [ 2.344426] Trying to unpack rootfs image as initramfs...
    [ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
    [ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
    [ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.581892] Scanning for low memory corruption every 60 seconds
    [ 2.582096] Initialise system trusted keyring
    [ 2.582129] audit: initializing netlink socket (disabled)
    [ 2.582137] type=2000 audit(1429303787.580:1): initialized
    [ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.606581] zbud: loaded
    [ 2.606685] VFS: Disk quotas dquot_6.5.2
    [ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.606997] fuse init (API version 7.22)
    [ 2.607048] msgmni has been set to 31698
    [ 2.607084] Key type big_key registered
    [ 2.607458] Key type asymmetric registered
    [ 2.607459] Asymmetric key parser 'x509' registered
    [ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.607514] io scheduler noop registered
    [ 2.607516] io scheduler deadline registered (default)
    [ 2.607531] io scheduler cfq registered
    [ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.608123] vesafb: scrolling: redraw
    [ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
    [ 2.763515] Console: switching to colour frame buffer device 240x67
    [ 2.917758] fb0: VESA VGA frame buffer device
    [ 2.917770] intel_idle: MWAIT substates: 0x42120
    [ 2.917771] intel_idle: v0.4 model 0x3C
    [ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.917911] ipmi message handler version 39.2
    [ 2.918057] ACPI: AC Adapter [AC] (on-line)
    [ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 2.918201] ACPI: Sleep Button [SLPB]
    [ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.918238] ACPI: Lid Switch [LID]
    [ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 2.918261] ACPI: Power Button [PWRF]
    [ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
    [ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957440] ACPI: Invalid passive threshold
    [ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
    [ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
    [ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
    [ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
    [ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
    [ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003360] ACPI: Invalid passive threshold
    [ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
    [ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
    [ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
    [ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
    [ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
    [ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
    [ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
    [ 3.013706] GHES: HEST is not enabled!
    [ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 3.056055] Linux agpgart interface v0.103
    [ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
    [ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
    [ 3.353165] brd: module loaded
    [ 3.353594] loop: module loaded
    [ 3.353831] libphy: Fixed MDIO Bus: probed
    [ 3.353886] tun: Universal TUN/TAP device driver, 1.6
    [ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 3.353914] PPP generic driver version 2.4.2
    [ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.353946] ehci-pci: EHCI PCI platform driver
    [ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
    [ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
    [ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.368161] usb usb1: Product: EHCI Host Controller
    [ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
    [ 3.368233] hub 1-0:1.0: USB hub found
    [ 3.368238] hub 1-0:1.0: 3 ports detected
    [ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
    [ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
    [ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384149] usb usb2: Product: EHCI Host Controller
    [ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
    [ 3.384234] hub 2-0:1.0: USB hub found
    [ 3.384238] hub 2-0:1.0: 3 ports detected
    [ 3.384329] ehci-platform: EHCI generic platform driver
    [ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 3.384336] ohci-pci: OHCI PCI platform driver
    [ 3.384342] ohci-platform: OHCI generic platform driver
    [ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
    [ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384590] usb usb3: Product: xHCI Host Controller
    [ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
    [ 3.384673] hub 3-0:1.0: USB hub found
    [ 3.384690] hub 3-0:1.0: 15 ports detected
    [ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.385471] usb usb4: Product: xHCI Host Controller
    [ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
    [ 3.385551] hub 4-0:1.0: USB hub found
    [ 3.385562] hub 4-0:1.0: 6 ports detected
    [ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
    [ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
    [ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 3.394254] mousedev: PS/2 mouse device common for all mice
    [ 3.394420] rtc_cmos 00:08: RTC can wake from S4
    [ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 3.394608] device-mapper: uevent: version 1.0.3
    [ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
    [ 3.394743] TCP: cubic registered
    [ 3.394800] NET: Registered protocol family 10
    [ 3.394914] NET: Registered protocol family 17
    [ 3.394922] Key type dns_resolver registered
    [ 3.395160] Loading compiled-in X.509 certificates
    [ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
    [ 3.395800] registered taskstats version 1
    [ 3.397885] Key type trusted registered
    [ 3.399811] Key type encrypted registered
    [ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
    [ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
    [ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
    [ 3.460705] regulator-dummy: disabling
    [ 3.460903] Magic number: 11:175:852
    [ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
    [ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 3.462219] EDD information not available.
    [ 3.462247] PM: Hibernation image not present or could not be loaded.
    [ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
    [ 3.463165] Write protecting the kernel read-only data&colon; 12288k
    [ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
    [ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
    [ 3.478948] udevd[143]: starting version 175
    [ 3.509828] pps_core: LinuxPPS API ver. 1 registered
    [ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.511322] PTP clock support registered
    [ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
    [ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
    [ 3.513783] ahci 0000:00:1f.2: version 3.0
    [ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
    [ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.528600] scsi0 : ahci
    [ 3.528832] scsi1 : ahci
    [ 3.528908] scsi2 : ahci
    [ 3.528979] scsi3 : ahci
    [ 3.529074] scsi4 : ahci
    [ 3.529152] scsi5 : ahci
    [ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
    [ 3.529186] ata2: DUMMY
    [ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
    [ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
    [ 3.529192] ata5: DUMMY
    [ 3.529193] ata6: DUMMY
    [ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
    [ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
    [ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [ 3.612547] usb 4-1: Product: USB5534
    [ 3.612548] usb 4-1: Manufacturer: SMSC
    [ 3.612549] usb 4-1: SerialNumber: 1239567
    [ 3.614189] hub 4-1:1.0: USB hub found
    [ 3.614228] hub 4-1:1.0: 4 ports detected
    [ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
    [ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
    [ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
    [ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 3.849416] ata1.00: configured for UDMA/100
    [ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
    [ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
    [ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 3.856471] hub 1-1:1.0: USB hub found
    [ 3.856575] hub 1-1:1.0: 6 ports detected
    [ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
    [ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.100529] hub 2-1:1.0: USB hub found
    [ 4.100626] hub 2-1:1.0: 8 ports detected
    [ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
    [ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
    [ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
    [ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.284596] hub 3-1:1.0: USB hub found
    [ 4.284626] hub 3-1:1.0: 4 ports detected
    [ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
    [ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
    [ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
    [ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
    [ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
    [ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    [ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
    [ 4.579770] Switched to clocksource tsc
    [ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
    [ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
    [ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
    [ 4.702997] EXT4-fs (sda5): recovery complete
    [ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
    [ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 4.736090] usb 3-7: Product: HP HD Webcam
    [ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
    [ 4.777998] random: init urandom read with 97 bits of entropy available
    [ 4.815946] init: ureadahead main process (382) terminated with status 5
    [ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
    [ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    [ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4.915232] udevd[465]: starting version 175
    [ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
    [ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
    [ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
    [ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
    [ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
    [ 4.941014] lp: driver loaded but no devices found
    [ 4.969070] Initializing HPQ6001 module
    [ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
    [ 4.977289] wmi: Mapper loaded
    [ 4.985916] [drm] Initialized drm 1.1.0 20060810
    [ 4.991703] hp_accel: laptop model unknown, using default axes configuration
    [ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 5.013849] [drm] Memory usable by graphics device = 2048M
    [ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
    [ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 5.013874] Console: switching to colour dummy device 80x25
    [ 5.030434] random: nonblocking pool is initialized
    [ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.036770] ppdev: user-space parallel port driver
    [ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 5.039280] Copyright(c) 2003-2013 Intel Corporation
    [ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
    [ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
    [ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.049977] Bluetooth: Core ver 2.17
    [ 5.049990] NET: Registered protocol family 31
    [ 5.049991] Bluetooth: HCI device and connection manager initialized
    [ 5.049998] Bluetooth: HCI socket layer initialized
    [ 5.050001] Bluetooth: L2CAP socket layer initialized
    [ 5.050005] Bluetooth: SCO socket layer initialized
    [ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 5.057904] Bluetooth: RFCOMM TTY layer initialized
    [ 5.057915] Bluetooth: RFCOMM socket layer initialized
    [ 5.057920] Bluetooth: RFCOMM ver 1.11
    [ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 5.061074] Bluetooth: BNEP filters: protocol multicast
    [ 5.061082] Bluetooth: BNEP socket layer initialized
    [ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 5.063658] [drm] Driver supports precise vblank timestamp query.
    [ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
    [ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
    [ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
    [ 5.107863] lp0: using parport0 (interrupt-driven).
    [ 5.117196] MXM: GUID detected in BIOS
    [ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
    [ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.136368] usbcore: registered new interface driver btusb
    [ 5.139414] init: failsafe main process (863) killed by TERM signal
    [ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
    [ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
    [ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
    [ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.232078] hub 3-1.2:1.0: USB hub found
    [ 5.232107] hub 3-1.2:1.0: 2 ports detected
    [ 5.245239] Linux video capture interface: v2.00
    [ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
    [ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
    [ 5.258213] usbcore: registered new interface driver uvcvideo
    [ 5.258215] USB Video Class driver (1.1.1)
    [ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
    [ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.372070] lis3lv02d: 8 bits 3DC sensor found
    [ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.385320] fbcon: inteldrmfb (fb0) is primary device
    [ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
    [ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
    [ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
    [ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
    [ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
    [ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
    [ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
    [ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
    [ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
    [ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.672470] usbcore: registered new interface driver usbhid
    [ 5.672471] usbhid: USB HID core driver
    [ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
    [ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
    [ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
    [ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
    [ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
    [ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
    [ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
    [ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
    [ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 6.950914] Console: switching to colour frame buffer device 240x67
    [ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 6.954405] i915 0000:00:02.0: registered panic notifier
    [ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
    [ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
    [ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
    [ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
    [ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.960166] ACPI: If an ACPI driver is

    @emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
    Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
    I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
    That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
    Thanks for the input and links.

  • Dual monitor setup MBA 2013

    Hello Everyone,
    This is my first post on the Apple Support Community.
    Nice to meet al of you!
    System information:
    Macbook Air medio 2013
    Model MacBookAir6,2
    Intel Core i7 1,7GHZ
    8GB
    512GB SSD
    I am wondering if it is possible to have a dual monitor setup using the thunderbolt feature daisy-chain.
    The configuration i am looking for is:
    MBA --> Belkin Thunderbolt™ Express Dock (for using gigabit ethernet) --> Dell U2414H --> Dell U2414H
    Specs:
    Belkin Thunderbolt™ Express Dock = http://www.belkin.com/us/p/P-F4U055/
    Dell U2414H = http://accessories.us.dell.com/sna/productdetail.aspx?c=us&cs=04&l=en&sku=860-BB CG
    Do i have a chance this could work?
    I'm looking forward to hearing from you all.
    Thanks!
    Kind regards,
    Njamo187

    Hello,
    I had the same problem with a nVidia GT120 card (2009 Mac Pro standard). OSX wouldn't show the gray screen on the 3090, even when it was connected alone (to the DVI port). Also, the login screen would always revert to the secondary display (connected thru the mini display port to DVI adapter).
    After login, all was well.
    Now I've solved the problem with an nVidia GTX 285 card. The 3090 is connected to the n.1 DVI port and the secondary display (a 1600x1200 Eizo L997) to the n.2 DVI port, and the Mac Pro boots correctly on the 3090 (gray screen and everything, at full 2560x1600 resolution).
    Note that the first time I booted up the Mac after replacing the GT120 with the GTX 285 I had the same problem, and solved it by disconnecting the secondary display and then rebooting with the 3090 alone. Now everything works as it should.
    Dont't know if there is a bug somewhere (EFI, maybe) of if the GT120 and your ATI are simply unable to work at full resolution before OSX desktop loading.

  • Monitor setup has changed - KDE Daemon after sleep

    After the monitor goes into powersave mode and is restored I keep gettung the Monitor setup has changed - KDE Daemon  box, anyone know how to get rid of this? everything seams to work but the box is getting annoying.  Logs dont show anything wrong and I have tried lots of things to fix it with no solution.

    Ok still cant work this out. manually set monitor settings etc the box still pops up when waking monotor from sleep. logs still show nothing.  Can anyone help?
    Log below
    [ 11.918]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 11.918]
    X.Org X Server 1.13.2.901 (1.13.3 RC 1)
    Release Date: 2013-02-15
    [ 11.918] X Protocol Version 11, Revision 0
    [ 11.918] Build Operating System: Linux 3.7.5-1-ARCH x86_64
    [ 11.918] Current Operating System: Linux ThunderBolt.LoadBalancer.Org 3.7.9-2-ARCH #1 SMP PREEMPT Mon Feb 25 12:04:25 CET 2013 x86_64
    [ 11.918] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bc60faad-b008-4f1f-8682-88d4c6f235cc ro quiet
    [ 11.918] Build Date: 18 February 2013 03:52:56PM
    [ 11.918]
    [ 11.918] Current version of pixman: 0.28.2
    [ 11.918] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.918] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.918] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 6 17:45:33 2013
    [ 12.161] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 12.326] (==) ServerLayout "ServerLayout0"
    [ 12.326] (==) No screen section available. Using defaults.
    [ 12.326] (**) |-->Screen "Default Screen Section" (0)
    [ 12.326] (**) | |-->Monitor "<default monitor>"
    [ 12.326] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 12.326] (**) | |-->Device "Intel Graphics"
    [ 12.326] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 12.326] (**) Option "BlankTime" "0"
    [ 12.326] (**) Option "StandbyTime" "0"
    [ 12.326] (**) Option "SuspendTime" "0"
    [ 12.326] (**) Option "OffTime" "0"
    [ 12.326] (==) Automatically adding devices
    [ 12.326] (==) Automatically enabling devices
    [ 12.326] (==) Automatically adding GPU devices
    [ 12.513] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 12.513] Entry deleted from font path.
    [ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 12.561] Entry deleted from font path.
    [ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 12.561] Entry deleted from font path.
    [ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 12.561] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 12.561] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 12.561] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 12.562] (II) Loader magic: 0x7fcc20
    [ 12.562] (II) Module ABI versions:
    [ 12.562] X.Org ANSI C Emulation: 0.4
    [ 12.562] X.Org Video Driver: 13.1
    [ 12.562] X.Org XInput driver : 18.0
    [ 12.562] X.Org Server Extension : 7.0
    [ 12.562] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 12.563] (--) PCI:*(0:0:2:0) 8086:2e22:1025:0251 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
    [ 12.563] (--) PCI: (0:0:2:1) 8086:2e23:1025:0251 rev 3, Mem @ 0xfe900000/1048576
    [ 12.762] Initializing built-in extension Generic Event Extension
    [ 12.763] Initializing built-in extension SHAPE
    [ 12.763] Initializing built-in extension MIT-SHM
    [ 12.763] Initializing built-in extension XInputExtension
    [ 12.763] Initializing built-in extension XTEST
    [ 12.763] Initializing built-in extension BIG-REQUESTS
    [ 12.763] Initializing built-in extension SYNC
    [ 12.763] Initializing built-in extension XKEYBOARD
    [ 12.763] Initializing built-in extension XC-MISC
    [ 12.763] Initializing built-in extension SECURITY
    [ 12.763] Initializing built-in extension XINERAMA
    [ 12.763] Initializing built-in extension XFIXES
    [ 12.763] Initializing built-in extension RENDER
    [ 12.763] Initializing built-in extension RANDR
    [ 12.763] Initializing built-in extension COMPOSITE
    [ 12.763] Initializing built-in extension DAMAGE
    [ 12.763] Initializing built-in extension MIT-SCREEN-SAVER
    [ 12.763] Initializing built-in extension DOUBLE-BUFFER
    [ 12.763] Initializing built-in extension RECORD
    [ 12.763] Initializing built-in extension DPMS
    [ 12.763] Initializing built-in extension X-Resource
    [ 12.763] Initializing built-in extension XVideo
    [ 12.763] Initializing built-in extension XVideo-MotionCompensation
    [ 12.763] Initializing built-in extension XFree86-VidModeExtension
    [ 12.763] Initializing built-in extension XFree86-DGA
    [ 12.763] Initializing built-in extension XFree86-DRI
    [ 12.763] Initializing built-in extension DRI2
    [ 12.763] (II) LoadModule: "glx"
    [ 12.816] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 12.828] (II) Module glx: vendor="X.Org Foundation"
    [ 12.829] compiled for 1.13.2.901, module version = 1.0.0
    [ 12.829] ABI class: X.Org Server Extension, version 7.0
    [ 12.829] (==) AIGLX enabled
    [ 12.829] Loading extension GLX
    [ 12.829] (II) LoadModule: "intel"
    [ 12.853] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 13.078] (II) Module intel: vendor="X.Org Foundation"
    [ 13.078] compiled for 1.13.2.901, module version = 2.21.3
    [ 13.079] Module class: X.Org Video Driver
    [ 13.079] ABI class: X.Org Video Driver, version 13.1
    [ 13.079] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 13.079] (++) using VT number 7
    [ 13.213] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 13.213] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 13.213] (==) intel(0): RGB weight 888
    [ 13.213] (==) intel(0): Default visual is TrueColor
    [ 13.213] (**) intel(0): Option "AccelMethod" "sna"
    [ 13.213] (--) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
    [ 13.213] (**) intel(0): Framebuffer tiled
    [ 13.213] (**) intel(0): Pixmaps tiled
    [ 13.213] (**) intel(0): "Tear free" disabled
    [ 13.213] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 13.253] (II) intel(0): Output VGA1 has no monitor section
    [ 13.362] (II) intel(0): Output HDMI1 using monitor section HDMI1
    [ 13.403] (II) intel(0): Output DP1 has no monitor section
    [ 13.443] (II) intel(0): EDID for output VGA1
    [ 13.552] (II) intel(0): EDID for output HDMI1
    [ 13.552] (II) intel(0): Manufacturer: GSM Model: 56cc Serial#: 258443
    [ 13.552] (II) intel(0): Year: 2011 Week: 4
    [ 13.552] (II) intel(0): EDID Version: 1.3
    [ 13.552] (II) intel(0): Digital Display Input
    [ 13.552] (II) intel(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 13.552] (II) intel(0): Gamma: 2.20
    [ 13.552] (II) intel(0): No DPMS capabilities specified
    [ 13.552] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 13.552] (II) intel(0): First detailed timing is preferred mode
    [ 13.552] (II) intel(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
    [ 13.552] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
    [ 13.552] (II) intel(0): Supported established timings:
    [ 13.552] (II) intel(0): 640x480@60Hz
    [ 13.552] (II) intel(0): 800x600@60Hz
    [ 13.552] (II) intel(0): 1024x768@60Hz
    [ 13.552] (II) intel(0): Manufacturer's mask: 0
    [ 13.552] (II) intel(0): Supported standard timings:
    [ 13.552] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 13.552] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 13.552] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 13.552] (II) intel(0): Supported detailed timing:
    [ 13.552] (II) intel(0): clock: 138.5 MHz Image Size: 531 x 299 mm
    [ 13.552] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 13.552] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 13.552] (II) intel(0): Supported detailed timing:
    [ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
    [ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 13.552] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
    [ 13.552] (II) intel(0): Monitor name: W2442
    [ 13.552] (II) intel(0): Supported detailed timing:
    [ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
    [ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 13.552] (II) intel(0): Supported detailed timing:
    [ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
    [ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 13.552] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 13.552] (II) intel(0): Supported detailed timing:
    [ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
    [ 13.552] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 13.552] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 13.552] (II) intel(0): Supported detailed timing:
    [ 13.552] (II) intel(0): clock: 27.0 MHz Image Size: 531 x 299 mm
    [ 13.552] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 13.552] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 13.552] (II) intel(0): Number of EDID sections to follow: 1
    [ 13.552] (II) intel(0): EDID (in hex):
    [ 13.552] (II) intel(0): 00ffffffffffff001e6dcc568bf10300
    [ 13.552] (II) intel(0): 0415010380351e780aaec5a2574a9c25
    [ 13.552] (II) intel(0): 125054210800b3008180814001010101
    [ 13.552] (II) intel(0): 0101010101011a3680a070381f403020
    [ 13.552] (II) intel(0): 3500132b2100001a023a801871382d40
    [ 13.552] (II) intel(0): 582c4500132b2100001e000000fd0038
    [ 13.552] (II) intel(0): 3d1e530f000a202020202020000000fc
    [ 13.552] (II) intel(0): 0057323434320a202020202020200128
    [ 13.552] (II) intel(0): 020321f14e900403011412051f101300
    [ 13.552] (II) intel(0): 000000230907078301000065030c0010
    [ 13.552] (II) intel(0): 00023a801871382d40582c4500132b21
    [ 13.552] (II) intel(0): 00001e011d8018711c1620582c250013
    [ 13.552] (II) intel(0): 2b2100009e011d007251d01e206e2855
    [ 13.552] (II) intel(0): 00132b2100001e8c0ad08a20e02d1010
    [ 13.552] (II) intel(0): 3e9600132b2100001800000000000000
    [ 13.552] (II) intel(0): 00000000000000000000000000000026
    [ 13.552] (II) intel(0): Printing probed modes for output HDMI1
    [ 13.552] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 13.552] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 13.552] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 13.552] (II) intel(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 13.552] (II) intel(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 13.552] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 13.552] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 13.552] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 13.552] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 13.552] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 13.552] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 13.552] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 13.552] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 13.552] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 13.552] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 13.552] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 13.552] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 13.552] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 13.552] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 13.552] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 13.552] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 13.552] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 13.552] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 13.552] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 13.552] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 13.552] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 13.552] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 13.593] (II) intel(0): EDID for output DP1
    [ 13.593] (II) intel(0): Output VGA1 disconnected
    [ 13.593] (II) intel(0): Output HDMI1 connected
    [ 13.593] (II) intel(0): Output DP1 disconnected
    [ 13.593] (II) intel(0): Using exact sizes for initial modes
    [ 13.593] (II) intel(0): Output HDMI1 using initial mode 1920x1080
    [ 13.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 13.593] (==) intel(0): DPI set to (96, 96)
    [ 13.593] (II) Loading sub module "dri2"
    [ 13.593] (II) LoadModule: "dri2"
    [ 13.593] (II) Module "dri2" already built-in
    [ 13.593] (==) Depth 24 pixmap format is 32 bpp
    [ 13.793] (II) intel(0): SNA initialized with Broadwater/Crestline backend
    [ 13.793] (==) intel(0): Backing store disabled
    [ 13.793] (==) intel(0): Silken mouse enabled
    [ 13.793] (II) intel(0): HW Cursor enabled
    [ 13.793] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 13.794] (==) intel(0): DPMS enabled
    [ 13.794] (II) intel(0): Overlay video not supported on this hardware
    [ 13.794] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 13.794] (II) intel(0): [DRI2] Setup complete
    [ 13.794] (II) intel(0): [DRI2] DRI driver: i965
    [ 13.794] (II) intel(0): direct rendering: DRI2 Enabled
    [ 13.794] (==) intel(0): hotplug detection: "enabled"
    [ 13.794] (--) RandR disabled
    [ 14.124] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 14.124] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 14.124] (II) AIGLX: enabled GLX_ARB_create_context
    [ 14.124] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 14.124] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 14.124] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 14.124] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 14.124] (II) AIGLX: Loaded and initialized i965
    [ 14.124] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 14.125] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
    [ 14.210] (II) intel(0): Setting screen physical size to 508 x 285
    [ 14.922] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 14.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 14.922] (II) LoadModule: "evdev"
    [ 14.922] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 14.957] (II) Module evdev: vendor="X.Org Foundation"
    [ 14.957] compiled for 1.13.0, module version = 2.7.3
    [ 14.957] Module class: X.Org XInput Driver
    [ 14.957] ABI class: X.Org XInput driver, version 18.0
    [ 14.957] (II) Using input driver 'evdev' for 'Power Button'
    [ 14.957] (**) Power Button: always reports core events
    [ 14.957] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 14.957] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 14.957] (--) evdev: Power Button: Found keys
    [ 14.957] (II) evdev: Power Button: Configuring as keyboard
    [ 14.957] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 14.957] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 14.957] (**) Option "xkb_rules" "evdev"
    [ 14.957] (**) Option "xkb_model" "evdev"
    [ 14.957] (**) Option "xkb_layout" "us"
    [ 14.988] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 14.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 14.988] (II) Using input driver 'evdev' for 'Power Button'
    [ 14.988] (**) Power Button: always reports core events
    [ 14.988] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 14.988] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 14.988] (--) evdev: Power Button: Found keys
    [ 14.989] (II) evdev: Power Button: Configuring as keyboard
    [ 14.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
    [ 14.989] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 14.989] (**) Option "xkb_rules" "evdev"
    [ 14.989] (**) Option "xkb_model" "evdev"
    [ 14.989] (**) Option "xkb_layout" "us"
    [ 14.989] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 14.989] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event14)
    [ 14.989] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
    [ 14.989] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
    [ 14.989] (**) UVC Camera (046d:0825): always reports core events
    [ 14.989] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event14"
    [ 14.989] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
    [ 14.989] (--) evdev: UVC Camera (046d:0825): Found keys
    [ 14.989] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
    [ 14.989] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14/event14"
    [ 14.989] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
    [ 14.989] (**) Option "xkb_rules" "evdev"
    [ 14.989] (**) Option "xkb_model" "evdev"
    [ 14.989] (**) Option "xkb_layout" "us"
    [ 14.990] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 14.990] (II) No input driver specified, ignoring this device.
    [ 14.990] (II) This device may have been added with another device file.
    [ 14.990] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
    [ 14.990] (II) No input driver specified, ignoring this device.
    [ 14.990] (II) This device may have been added with another device file.
    [ 14.991] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
    [ 14.991] (II) No input driver specified, ignoring this device.
    [ 14.991] (II) This device may have been added with another device file.
    [ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event12)
    [ 14.991] (II) No input driver specified, ignoring this device.
    [ 14.991] (II) This device may have been added with another device file.
    [ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event13)
    [ 14.991] (II) No input driver specified, ignoring this device.
    [ 14.991] (II) This device may have been added with another device file.
    [ 14.991] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
    [ 14.991] (II) No input driver specified, ignoring this device.
    [ 14.991] (II) This device may have been added with another device file.
    [ 14.992] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
    [ 14.992] (II) No input driver specified, ignoring this device.
    [ 14.992] (II) This device may have been added with another device file.
    [ 14.992] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event8)
    [ 14.992] (II) No input driver specified, ignoring this device.
    [ 14.992] (II) This device may have been added with another device file.
    [ 14.992] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
    [ 14.992] (II) No input driver specified, ignoring this device.
    [ 14.992] (II) This device may have been added with another device file.
    [ 14.993] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 14.993] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 14.993] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 14.993] (**) AT Translated Set 2 keyboard: always reports core events
    [ 14.993] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 14.993] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 14.993] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 14.993] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 14.993] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 14.993] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 14.993] (**) Option "xkb_rules" "evdev"
    [ 14.993] (**) Option "xkb_model" "evdev"
    [ 14.993] (**) Option "xkb_layout" "us"
    [ 14.993] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
    [ 14.993] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 14.993] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
    [ 14.993] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 14.993] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
    [ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
    [ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
    [ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 14.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
    [ 14.994] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
    [ 14.994] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 14.994] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
    [ 14.994] (II) No input driver specified, ignoring this device.
    [ 14.994] (II) This device may have been added with another device file.
    [ 14.994] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 14.994] (II) No input driver specified, ignoring this device.
    [ 14.994] (II) This device may have been added with another device file.
    [ 23.841] (II) intel(0): EDID vendor "GSM", prod id 22220
    [ 23.841] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.841] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.841] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 23.842] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 23.842] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 23.842] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 23.842] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 23.842] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 23.842] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 23.842] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 23.842] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 23.842] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 23.842] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 23.842] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 23.884] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
    [ 24.108] (II) intel(0): EDID vendor "GSM", prod id 22220
    [ 24.108] (II) intel(0): Using hsync ranges from config file
    [ 24.108] (II) intel(0): Using vrefresh ranges from config file
    [ 24.108] (II) intel(0): Printing DDC gathered Modelines:
    [ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 24.108] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 24.108] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 24.108] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 24.108] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 24.108] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 24.108] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 24.108] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 24.108] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 24.108] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 24.108] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 33.191] (II) intel(0): EDID vendor "GSM", prod id 22220
    [ 33.191] (II) intel(0): Using hsync ranges from config file
    [ 33.191] (II) intel(0): Using vrefresh ranges from config file
    [ 33.191] (II) intel(0): Printing DDC gathered Modelines:
    [ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 33.191] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 33.191] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 33.191] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 33.191] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 33.191] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 33.191] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 33.191] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 33.191] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 33.192] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 33.192] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 33.192] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 33.192] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 33.192] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 33.192] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 33.192] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 40.998] (II) intel(0): EDID vendor "GSM", prod id 22220
    [ 40.998] (II) intel(0): Using hsync ranges from config file
    [ 40.998] (II) intel(0): Using vrefresh ranges from config file
    [ 40.998] (II) intel(0): Printing DDC gathered Modelines:
    [ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 40.998] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 40.998] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 40.998] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 40.998] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 40.998] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 40.998] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 40.998] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 40.998] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 40.998] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 40.998] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 936.094] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
    [ 936.094] (II) UnloadModule: "evdev"
    [ 936.094] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 936.094] (II) UnloadModule: "evdev"
    [ 936.094] (II) evdev: UVC Camera (046d:0825): Close
    [ 936.094] (II) UnloadModule: "evdev"
    [ 936.094] (II) evdev: Power Button: Close
    [ 936.094] (II) UnloadModule: "evdev"
    [ 936.094] (II) evdev: Power Button: Close
    [ 936.094] (II) UnloadModule: "evdev"
    [ 936.194] Server terminated successfully (0). Closing log file.
    kde log
    Note that your system uses syslog. All of kdm's internally generated messages
    (i.e., not from libraries and external programs/scripts it uses) go to the
    daemon.* syslog facility; check your syslog configuration to find out to which
    file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(7126) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(7120)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(7120)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    klauncher(7543) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(7537)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(7537)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    kdmgreet: Fatal IO error: client killed
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(326) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(285)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(285)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(341) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(294)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(294)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(273) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(264)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(264)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Error: Can't find file "uk" for symbols include
    > Exiting
    > Abandoning symbols file "default"
    Errors from xkbcomp are not fatal to the X server
    klauncher(857) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(847)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(847)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Error: Can't find file "uk" for symbols include
    > Exiting
    > Abandoning symbols file "default"
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Error: Can't find file "uk" for symbols include
    > Exiting
    > Abandoning symbols file "default"
    Errors from xkbcomp are not fatal to the X server
    klauncher(1223) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(1215)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(1215)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Error: Can't find file "uk" for symbols include
    > Exiting
    > Abandoning symbols file "default"
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(269) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(263)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(263)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(706) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(700)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(700)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(2630) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(2624)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(2624)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(3118) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(3112)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(3112)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(4638) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(4632)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(4632)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    klauncher(5014) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(5008)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(5008)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Server terminated successfully (0). Closing log file.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extensio

  • Thankpad W530 and Docking Station - missing audio device???

    I needed to set up a new Thinkpad Minii Dock Plus Series 3/USB with my W530.
    First, there was a problem that the computer woldn't "seat" in the docking station.  After calling Lenovo Tech support, and not getting anywhere, I individually pressed the "prongs" that stick up from the docking station.  There was a loud "click" and several small thingies dropped down into the docking station.  After that, the laptop fit right in the way it's supposed to.
    I thought I was done, but I noticed an error message on my screen about a device driver error.  The Lenovo Technician had me go to control panel > system > device manager.....   right click on the machine name, and then click on "scan for hardware changes".
    Device Manager didn't show any errors, but doing this generated an error box that said:
    Device driver software was not successfully installed
    Unidentified device --- device unplugged
    High Definition Audio Controller --  ready to use
    NVIDIA High Definition Audio ---  ready to use
    What do I do now?  Is my docking station defective?  Do I need to plug something into the docking station for this update to complete?  The Lenovo tech had no idea what I might do, other than to call on Monday for "level 2 techs".
    As a related issue when I went to update Windows, the following update was to be installed:
    NVIDIA Corporation - Audio Device, Other hardware - NVIDIA High Definition Audio      3.9 MB
    When I try to install this update, I get:
    Code 800F020B  Windows Update encounterd an unknown error
    I think all of this is connected, but I don't see how it might have anything to do with the docking station.
    As to the docking station, I tested the power connection (green light is on), a USB port (works), the audio out connection (speakers work fine, with no crackling sound), and the Ethernet connection (works).  I haven't yet tried connecting an additional monitor, but that would have nothing to do with audio....

    This is the Windows update that will not install:
    NVIDIA Corporation - Audio Device, Other hardware - NVIDIA High Definition Audio
    Installation date: ‎5/‎11/‎2013 2:14 PM
    Installation status: Failed
    Error details: Code 800F020B
    Update type: Optional
    NVIDIA Corporation Audio Device, Other hardware software update released in July, 2012
    More information:
    http://sysdev.microsoft.com/support/default.aspx
    Help and Support:
    http://support.microsoft.com/select/?target=hub
    Any idea of how the docking station might be causing this?
    All updates were done prior to installing the docking station.
    Now I have this "problem" (that might be no big deal - I don't understand what's going on.

  • Docking station under Linux, T430/W530

    Hi all!
    How are the docking stations working under Linux? I am thinking especially of the T430 and W530 series. Also, is it possible to run three monitors on only the integrated graphics (HD4000)? I know it is supported on chip level, but does Lenovo enable this feature on the motherboard/docking station, or do I have to run the discrete card to get three monitors?

    Unfortunately, no. The VGA outputs seems to be dead, I don't know if they are actually broken or if it's just a driver thingie. However, having two external monitors using nVidia TwinView and a little hack found here: http://blog.gordin.de/post/optimus-guide is possible. Unfortunately, my window manager does not handle TwinView very well, and I am still to find a working solution for running two separate monitors on the digital outputs.

  • How do I get my Macbook Pro 15" to run dual monitor setup with Dual Link DVI outputs

    I own have two 27" 2560x1440 WQHD LED IPS Computer monitors and have been trying to get them to work with my macbook pro 15" w retina for over a month now. I have purchased multiple products and nothing has worked. The big problem is that the only input that the monitors have is a Dual Link DVI input. The closest that i have gotten to getting them to work was this morning when I bought 2 Mini Display Port to Dual Link DVI Adapters for $99 a peice. Below is a link
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?afid=p219%7CGOUS&cid=AOS-US-KWG-PLA
    Problem is that when I hook them up, I still only get a picture on one of the screens. Also, it requires you to plug into a mini Display port and USB port which takes up all of the space for me to run any othe peripherals. Though it has a built in USB port, when I plug my apple keybaord into it, I get an saying "USB Device Needs power, connect "keyboard Hub" to power or usb port on this mac"
    I have looked everywhere for a docking station that would satisfy my needs, however, it does not exist. I use my macbook as my main office computer and take it home with me every night. I switched from the lenovo thinkpad to the macbook and have been satsified with my decision except for the fact that i cannot connect my monitors to it.
    Please help!

    Yes, that would work, however it would cost me $2000 for the monitors.

Maybe you are looking for

  • My iPhone doesn't want to restore on iTunes after crashing from updating to iOS 6.1.2

    I keep getting countless errors and I need my phone back up and running asap

  • Air Canada compatibility with Mac?

    I am unable to make a booking with Air Canada online. It is a 6 stage process and I get blocked trying to proceed to the 3rd stage. 1st stage is selecting a destination and chossing a date. 2nd stage is electing flights and that's as far as I get, hi

  • CRM BADI CRM_COND_COM_BADI only called when line created or changed

    I am trying to ensure that the BADI CRM_COND_COM_BADI is called (to adjust pricing communication structure) for all line items every time a user hits update or enter during creation of a sales order via the web.  In my testing I am finding that the B

  • Skype Premium with Unlimited World

    I have a Skype Premium account with Unlimited World. I received an email like many others detailing the changes to Skype Premium, and that I would continue to receive my Unlimited World subscription. However since receiving that email, I have no Unli

  • WebHelp Navigation TOC acting goofy in Firefox 3

    I'm using RH7. In IE, everything works fine. In FF3, the following happens: I open a help topic, which happens to be one of the topics inside a book. The topic opens very briefly and then the help page for its parent (at the book level) opens. Any id