Triple Boot Snow Leopard, Leopard, Windows 7 RC

I just managed a triple boot setup on a new MBP. I now have Snow Leopard 10.6.1, Leopard, 10.5.8, and Windows 7 RC and can boot easily to
any of them with the option-key at power on. These are the steps I followed:
1) Installed the windows 7 RC via Boot Camp as per this
recipe: http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
2) Formated an external FW drive with 3 partitions: Clone, Backup, and Media.
3) Used Carbon Copy Cloner (CCC) to clone a 10.5.8 installation I have on a mac-mini onto an external FW drive. (Even though I have a
Leopard family pack install disk, you can't boot from it - at least I couldn't and anyway, most of what I wanted was on the mini anyway).
4) Used Time Machine to backup the 10.6.1 onto the FW drive Backup partition (I guess I could have used CCC but I was familiar with Time
Machine and not with CCC until today).
5) Used WinClone to make an image of the BOOTCAMP partition on the external FW drive (just in case)
6) I booted the MBP from the Clone of 10.5.8 to make sure it would work and that there would be no driver issues (trackpad etc) - it worked
just fine.
7) Now comes the scary part: (I have read a lot of posts about the challenges of doing a triple boot with a Boot Camp Windows partition
already installed that result in XP or Vista not being bootable. Lots of folks have found workarounds to solve this I know). With the
machine booted from the clone of 10.5.8 -RUNNING ON THE EXTERNAL FW DRIVE, I launched the disk utility and and resized the 10.6.1 partition
to half what it was. (click on the 10.6.1 partition and then click on the + sign at the bottom left - this will allow you to keep the
contents of 10.6.1 intact but free up some space). Call the new volume whatever you like and format it Mac OS Extended (Journaled).
8) Used CCC to copy the clone of 10.5.8 onto the new partition created in step 7.
9) Shut down and Power-up with the option key and all was well. All three OS's available. No modification of the Windows 7 bootmgr or any
other boot parameters.
10) Boot to the 10.5.8 partition and change the computer network name to something else other than the name of the mini.
Worked for me and wasn't as difficult as some of the other approaches.

Just one question: Why would you create a partition for Snow Leopard and Leopard?

Similar Messages

Mac Pro 2010 triple boot (Snow Leopard + Windows + Yosemite)?

Hello All,
This is my first question here, I'm usually trying to find the answer myself, but this time I wasn't able to find anything clear enough to me. So I hope that someone can give me clear and easy to understand answer. I must also tell that my English isn't perfect, but should be more than good enough for communication. :-)
I have Mac Pro 2010, 4 core CPU 3.2 GHz, 6 GB RAM, ATI 5870.
HD Bay 1: WD Black 1 TB - Boot Snow Leopard 10.6.8
(Just to add: I am happy because when I bought my Mac it came with 10.6. I am happy with it, it's stable, and I want to keep it as it is)
HD Bay 2: WD Black 1 TB - Boot Windows 7 x64 (bootcamp, full drive)
(I am very happy how it works, so I want to keep it as is)
HD Bay 3: WD Green 2 TB - for all kind of data storage
HD Bay 4: Was empty until yesterday, but now I have another WD Black 1 TB to put it in - still not formatted.
I would like to install Yosemite on that new drive (first I was thinking about Maverick, but then I saw that some new applications will not run, like Final Cut Pro X, new MS Office, still in beta, plus I would like to use iMessage, etc.), and keep everything else as it is now - absolutelly untouched.
• Is it safe to do it, or I can make some mistake and lose Snow Leo and/or Windows?
• Is position of the drives important? Should I, for example, put new drive in a Bay 3, and move data disk to Bay 4, or it doesn't matter?
• When I download it from App Store, and when installation starts automatically, do I have an option to select to keep untouched everything I have now?
(I don't want even to collect any data from Snow Leopard, like mail settings, bookmarks, applications installed - absolutely nothing, it should run as a totally new comp and without any interaction with Snow Leopard, except ordinary hard disk access, like any other hard drive)
• Will my bootcamp drive be safe, I will still be able to boot from it?
I was also thinking about this:
I saw that it is possible to make bootable USB flash drive with installation. If I do that, and if I phisically unplug all other drives except a new one, then do installation, shut it down, and plug back all other drives, will everything work? Will I have triple boot when I press option key during start-up? Does all this makes sense at all to you?
Finally, does anyone have some experience with Mac Pro 2010 + ATI 5870 with Yosemite? Is it smooth, no problems with graphics or some other things?
I will really appreciate some answer about all this.
Cheers!

Some tips about Yosemite and Core Storage from MacIntouch Reader Reports on Yosemite:
Ric Ford [MacInTouch]
Yosemite's changes have led to questions and confusion about disk formatting and partitioning issues, backward compatibility, and dual-booting Mac OS X 10.6 and Yosemite. Below are a few notes on these issues from an email discussion (questions, tips and clarifications are welcome).
Core Storage changes debuted in OS X 10.7 Lion, with Apple's new FileVault 2 whole-disk encryption and hidden Recovery Partition.
Generally, running OS X 10.7 and up shouldn't corrupt or convert the HFS+ partitions used by pre-OS X 10.7 systems (still supported in later OS X versions). There are, however, a few special cases to beware, and this is where things get confusing. Here are some specific issues:
1) FileVault 2 encryption and "Fusion" drives both depend on Core Storage, so applying those to any partition will render it inaccessible by pre-OS X 10.7 systems.
2) Yosemite's installation process silently converts a partition to Core Storage, incompatible with Mac OS X 10.6 and earlier. Ars Technica's review describes this issue.
3) Running Disk Utility's "repair" function in Yosemite against a Mac OS X 10.6 (HFS+) partition has caused problems in some cases, such as making the Mac OS X 10.6 partition unbootable.
(A search for Core Storage on MacInTouch will turn up more discussion and tips.)
See also:
Core Storage [Wikipedia]
OS X Mountain Lion Core Technologies Overview (PDF) [Apple]
OS X 10.10 Yosemite: Installation [Ars Technica]
File system changes in Lion [Ars Technica]
Can't remove Core Storage from hard drive [Apple Discussions]
How To: Disable CoreStorage on Mac OS X 10.10 (Yosemite) [Symantec]
http://www.macintouch.com/readerreports/yosemite/index.html#d16apr2015

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Triple Boot; Mavericks, Snow Leopard & Windows 7

Hello
Has anyone had experience of creating an installation that can triple boot, Snow Leopard, Mavericks & Windows 7?
I have software that can only run 10.6.8, some that will only run 10.7 or beyond and some Windows only. I'd like to use a single machine.
Many thanks in advance.
Stevie

Hello
I just came across this
https://discussions.apple.com/message/16073483#16073483
snow leopard, lion and windows 7 discussion
I reckon the principle is the same
Stevie

Snow Leopard not booting after installation in rEFIt triple boot system

Hello,
I have a Core Duo Mac mini, on which I was successfully using a rEFIt triple boot configuration with
Leopard, Windows XP and Linux. After installing Snow Leopard on top of Leopard, Snow Leopard boots directly (without rEFIt showing up) the first time after installation. On the following reboots, rEFIt shows up but when selecting Mac OS, the system shows first the grey screen with the Apple icon, then it shows a grey screen with a "no access" icon and does not make any further progress. I reinstalled several times and at last I even removed rEFIt, but Snow Leopard won't boot anyway.
Can anybody help? Thanks

Welcome to Apple Discussions!
I'd post a bug report here:
http://sourceforge.net/tracker/?group_id=161917&atid=821764
They could probably help isolate your problem.

I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
any help or advice would be really appreciated, thanks

Boot Camp is used to support Windows on the same drive.
You can have a different OS on every drive.
You could have Windows 7, Vista, and XP all on one drive if you so choose.
I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
Remove all your other drives while you install Windows 7.
You could even relocate XP - if you need it even - or recover the hard drive space.
You should always keep 30% free for Mac OS; same for data/media drives.
Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

Triple Boot - Leopard, Snow Leopard & Win 7

Hello;
I have a Macbook Pro5,5 (unibody aluminum late 2009). I used disk utility as a simple process of partitioning so I could dual boot Leopard and Snow Leopard.
Is it possible to triple boot Leopard, Snow Leopard and Windows 7 x64?
I want to use it for specific testing at work and do "not" want to use a vmware solution.
Thanks

Hello
I just came across this
https://discussions.apple.com/message/16073483#16073483
snow leopard, lion and windows 7 discussion
I reckon the principle is the same
Stevie

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Yes as I said before. If your model Mac came with Snow Leopard and you are now running Mt Lion and have Windows installed in a Boot Camp Partition all you have to do is make the Mt Lion partition smaller, take the free space and make it another Mac partition and you should be able to install Snow Leopard into that partition.
I have Snow Leopard, Lion and Mt Lion installed on my MBP. No Windows in a Boot Camp partition because I run Windows XP in a Virtual Machine on both Lion and Mt Lion.

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

64-Bit and 32-Bit: Snow Leopard and Windows 7

Hi All:
I will eventually be dual booting Snow Leopard and Windows 7. I have never used Boot Camp before and have several questions, including one related to Boot Camp.
First, when installing 7, will I need to format the 7 partition, presumably NTSF.
Second, given my MBP's 64-bit architecture, will I be able to run 64-bit 7. I am aware, of course, that not many programs are available in 64-bit for either platform. Also, I know that the Snow Leopard renditions of all, or most, of the iLife programs will be 64-bit.
Does Leopard (and will Snow Leopard) run 32-bit programs in an emulation mode similar to the way 64-bit Vista/7 run 32-bit programs. In this regard, I assume, which surely must be the case, that OS X is a 64-bit program.
Message was edited by: donv (The Ghost)

hi donv,
i run win7rc1 via bootcamp 32bit on mbp 17" 3.06ghz
and same, but 64bit on imac 3.06ghz.
all works perfect, also apple's keyboard (brightness+-/sound +-/keyboardbcklight +-/eject ..
format is ntfs; backupable with winclone, also now (i have cloned from ssd to ssd).
apps run also in emulation, but where specified drivers are needed (e.g. for flashing ci-cards) 32bit are a must (therefore i have 32bit on my mbp).
partly i have boot camp 3.0 drivers (snowleo) in the mbp ..

Failed upgrade on snow leopard and windows 8 on bootcamp

I'm using macbook pro early 2011 and using snow leopard and windows 8 on bootcamp. After updating to the latest version of snow leopard, I upgraded to Mountain Lion. On the end of the installation, the installer/bootloader can't boot the mac OS or Win 8 bootcamp. I tried using option key only recovery partition can be boot. Also I've tried reinstall from command-R menu, but the installer can't find the mac partiotion.
I tried using disk utility from recovery menu but it says "invalid BS_jmpBoot in..." Verify or Repair has failed successfully. I think the partition information is mismatch or can't be read by bootloader.
I have put the problematic harddrive to external case, using it as external drive and put an unused harddrive and install snow leopard. When I plugged in the external drive the os won't load/mount the drive/partitions. I've tried it on linux, the mac partition can be mounted but the win 8 bootcamp still can't be access.
How can I recover the partiotion or data on the win 8 bootcamp partition? Thanks for the help.
FYI the result from sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   397430960      2 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
   397840600     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
   399110144 1554413568      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header

Windows 8 is not supported in Boot Camp. To get back to a supported configuration, boot from your installation disc and partition the internal drive with the default choices (wiping all data on the drive.) Then restore the OS X startup volume from the last Time Machine snapshot or other backup you made before trying to upgrade. You should then be able to upgrade to 10.8. If you wish, run Boot Camp Assistant and create a Windows 7 (not 8) installation.

Snow Leopard and Windows 7 - Unable to locate CD/DVD drivers to install

hi,
I am using Boot Camp to install Windows 7, and when the installation starts, I get an error message/ popup window that states: "Unable to locate CD/DVD drivers...".
I can't eject the CD, or figure out which drivers it needs, & how to get them.
I've noticed a lot of people are having this same issue with various PC manufacturers and various releases of Windows 7...
Some people have successfully avoided this by installing off of a USB drive. I am wondering if it's at all possible to install Windows 7 / Boot Camp with a USB drive... or if there is another solution to this problem.
thanks
ben

hi,
i'm replying again to my own question with more info
basically i inserted the snow leopard and the mac os x install dvd's that shipped with my early 2009 nehalem mac pro tower into a windows machine. i was able to "explore" the dvd using windows and found some boot camp support folders which contained drivers.
i copied these drivers to a thumb drive.
so now, during the windows 7 install... i have the option of navigating to these drivers on my thumb drive.
however - i don't see any potential drivers for the dvd burner/ superdrive...
here is the list of companies/ drivers supplied:
ATI
Broadcom
Marvell
Apple
Cirrus
MotorolaSetup.exe
Asix
IDT SigmaTel
NVidia
Atheros
Intel
RealTekSetup.exe
it is my understanding that the superdrive is hitachi...
the information on this drive inside the system profiler is as follows:
"HL-DT-ST DVD-RW GH41N:
Firmware Revision: PQ05
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds"
i really wish i knew more info about this drive and where to get windows drivers for it so i can install windows 7 on my mac pro.
this is the stock drive that shipped with this mac pro. i find it strange that no one else is running into this issue?
thanks
ben

Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
So here's my dilemma:
1. Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on the same "Fusion 5"?
2. Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
3. Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
Has anyone had any experience installing BOTH a previous (older) version of Apple OSX ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
OR
Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

mende1
Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
"Unlimited Client License"
It was around $25.50 (USD) with sales tax and shipping (NYS).
One thing though ... when you mention: "you should make two virtual machines".
Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
"two machines" (one for Snow Leopard and one for Windows 7)?

Can I dual boot Snow Leopard and Mountain Lion on one hard drive?

I want to make a new partition and be able to boot to either OS. Is this possible, if so, how? I would think just make a new partition and install the dmg file to that new partition.

@jimmyk11: AppleCare has actually informed me that "No - this MacBooPro9,1 cannot boot Snow Leopard".
It originally came with lion 10.7.4 installed. I have since upgraded to Mountain Lion 10.8 and (today, after a week or so of ML) I reverted to Lion 10.7.4. But now I find I can no longer boot into Lion 10.7.4 from my external FW800 drive (for troubleshooting and housekeeping). So it looks as if the "boot problems" are not confined to Snow Leopard 10.6.8.
Interestingly, I can use this same external drive to boot my iMac (10.7.4) and my older MBP8,3 (10.8) into 10.7.4 - but not the newer MBP9,1.
The MBP9,1 with Lion and Mountain Lion is turning into a disaster when it comes to external booting. If I could, I'd demand a return and a refund. After bottle-feeding Lion for a year, 10.7.4 seems basically stable and can still boot into Snow Leopard and Lion from my external drives if needed. But now I see I have a worse problem: Crippled Hardware. I suspect this bug needs a firmware update - if it is fixable at all.

My Bluetooth disappeared from my MacBook. How do I reinstall? That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windo

My Bluetooth disappeared from my MacBook. How do I reinstall?
That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windows 2011 with the same key? Why does the snow leopard has not fixed the bluetooth?

Download and install this update combo. This update combo for Snow Leopard can bring any version of Snow Leo up to 10.6.8 with the lastest version of App Store for Snow Leo.
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399

Triple Boot Snow Leopard, Leopard, Windows 7 RC

Similar Messages

Maybe you are looking for