Triple click doesn't select all when autocomplete appears.
I recently updated to Firefox 34.0.5 (on Windows 7) and it seems like every time I get an issue sorted out, I discover another one. Today, I have realized that triple-clicking within a form or text field does not select all of the text if the autocomplete appears. This has never been an issue for me with previous Firefox versions. This is quickly become a nuisance for me and I would like to get it resolved ASAP. I have tried looking around for solutions, but all I've really been able to find is this bug report:
https://bugzilla.mozilla.org/show_bug.cgi?id=307776
I've read through that and related reports, but I didn't see a resolution anywhere. Is there anything I can do to fix this?
Note: "browser.triple_click_selects_paragraph" is set to true and it works as expected, but NOT if the autocomplete dropdown appears.
EDIT: I have also just discovered that I can no longer delete autocomplete entries by highlighting them and pressing Delete. Were these changes actually intentional or is there just a problem on my end?
Another user posted about this for Firefox 31 (the ESR version, so could have been even earlier) ([https://support.mozilla.org/questions/1027748 Double click select all does not work in web site's search area after going back.]) (it really should reference triple-click, I think).
The corresponding new bug report is: [https://bugzilla.mozilla.org/show_bug.cgi?id=1094041 1094041 – Double click select all does not work after form history shows up] (it really should reference triple-click, I think). That doesn't seem to have gone anywhere as the cause of the change was not obvious.
Have you tested in Firefox's Safe Mode to rule out one or more of your extensions as possible culprits? That's a standard diagnostic tool as you probably know. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?
Similar Messages
-
Acrobat X: Triple click doesn't select paragraph...
Acrobat X: Triple click doesn't select paragraph. It only select a line of text. Can this be fixed?
Another user posted about this for Firefox 31 (the ESR version, so could have been even earlier) ([https://support.mozilla.org/questions/1027748 Double click select all does not work in web site's search area after going back.]) (it really should reference triple-click, I think).
The corresponding new bug report is: [https://bugzilla.mozilla.org/show_bug.cgi?id=1094041 1094041 – Double click select all does not work after form history shows up] (it really should reference triple-click, I think). That doesn't seem to have gone anywhere as the cause of the change was not obvious.
Have you tested in Firefox's Safe Mode to rule out one or more of your extensions as possible culprits? That's a standard diagnostic tool as you probably know. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? -
Ctrl + click doesn't select ALL non-transparent pixels
Hello. How can I select ALL non-transparent pixels from a layer?
- Ctrl + click doesn't work (it seems to have a 50% tolerance - my opacity 7% and 40% pixels don't get selected);
- The magic wand tool with 0% tolerance does work (when I click on a transparent pixel it selects ALL opacity 0% pixels around it and then I just have to inverse selection), BUT my image has a lot of holes with transparent areas and selecting them one by one would be tedious.
Thank you.I think it should. if your only going by the selection outline, then the selection outline only shows the pixels that are 50% or more selected.
In other words the pixels have varying degrees of transparency. If the selected pixel is not at least 50% opaque then the selection outline doesn't show them, but they are selected when ctrl clicking on a layer thumbnail.
After making the selection by ctrl clicking make a new layer and fill the selection with black and then turn off the visibilty of all the other layers.
You should get a better idea of what is happening.If you were to lock the transparency of the layer and fill with black you should get the same result.
If you use the magic wand at 0% tolerance then your not getting a true selection of the layer transparency, but rather making the partially transparent pixels fully opaque (selected). -
Shift and left click doesn't select all files in a folder
When i want to select a group of consecutive files, shift & left click only selects the first & last file & not all in between. How do i change this to select ALL? Im using a 2014 MacBook Air running the latest version of Yosemite (as of 4th January 2015).
Switch to list or column view. If you must use icon view, instead of Shift-clicking items, click on an empty space near one of them and drag to enclose them.
(119467) -
Is there a way to select all when deleting photos from iPad?
I am trying to delete about 1000 pictures from my iPad and am trying to find a more efficient way to do so instead of selecting each individual picture. Is there a way to select all when deleting?
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
When I "Select All" it only seems to select all on the
current layer. And it doesn't select sub-layers (or sub groups or
whatever they're called - a folder inside a layer).
Is this normal?If your other layers are not locked or invisible, it sounds like you've turned on "Single Layer Editing".
Mark A. Boyd
Keep-On-Learnin' :-) -
SelectManyListbox select ALL when duplicates are present
I am trying to use the ADF Faces selectManyListbox component to select ALL upon page load. I have set the value of my selectManyListbox to a List, and this works for most of my selectManyListbox components.
However, when I use this solution on a different selectManyListbox that has a duplicate attrname (id) but different display name (I know the data is bad), the duplicate is not selected. I want the "ALL" checkbox selected though, and it will not be selected upon page load unless all are selected in the list.
When I print out the List "selectedPS" in the log, I can see both of the duplicate values in the list, but only this first is selected in the selectManyListbox.
Is there anyway to get around this? Or is this the entended functionality ? I am using JDev 11.1.1.3
in my fragment ...
selectManyListbox value="#{backingBeanScope.backing_Fragments_SearchForm.selectedPS}"
in the backing bean...
public List getSelectedPS(){
if(selectedPS == null){
selectedPS =
selectItemsForIterator("AllShopsView1Iterator","ShopId");
return selectedPS;
public void setSelectedPS(List selectedValues){
this.selectedPS = selectedValues;
public static List selectItemsForIterator(String iteratorName,String valueAttrName) {
BindingContext bc = BindingContext.getCurrent();
DCBindingContainer binding =
(DCBindingContainer)bc.getCurrentBindingsEntry();
DCIteratorBinding iter = binding.findIteratorBinding(iteratorName);
List selectItems = new ArrayList();
for (Row r: iter.getAllRowsInRange()){
selectItems.add(r.getAttribute(valueAttrName));
return selectItems;
Thanks,
JessicaIt depends upon the kind of duplicte. You have duplicates where two copies of a file are generated and added. You can have duplicates where both entries point to the same file. If you have the latter and delete the file the second entry will end up with a broken link.
Get info on the tracks and see if they point to exactly the same file in the exact same location. -
How do you select all when trying to delete mail messages
How can I select "all" email messages to delete them? I know with PC you can push control + a, how do you do it on a MAC?
Instead of Control A on any Mac it's Command A. For a list of keyboard shortcuts please click Keyboard Shortcuts
-
Can I do a "select all" when creating themes and settings?
When I am creating my dvd, can I do something so that each of the scene selection screens will have the same theme, same movie clip in the drop zone and same music playing? Is there a way to select all the same preferences for the customize option? Thank you!
Hi Navy91,
After you have finished customised the first scene selection menu screen, use the Adanced > Apply Theme To Folders menu command to apply the same theme settings to all other scene selection menus following it. -
When I click "back" button selection screen is not appearing
Dear All,
1) I have a "report" which takes some parameteres in the seclection screen ( standard 1000 ) and displayes a report. This is transported. Say the name is ZPRG1
2) We have copied ZPRG1 to ZPRG_temp and modified some logic and copied back to ZPRG1.
3) All looks fine but in ZPRG1 in SE80 it is not displaying screen "1000" listed. And when I pressed "back" button from the standard report menu it is going into "blank" screen first. and then when i click again it comes to the selection screen. I understand that some thing happened with GUI stuff but ran out of all ideas and coming here to get some help from you..
I am almost in a lost state.. can you please suggest me?
Thanks for your time.
Regards,
KiranHi zhenglin gu,
Finally I found the reason.. still not conviced.. but the issue is happening when I write block with in the block. I am not convinced but it is true here..
Issue code******** ( Block with in block )
SELECTION-SCREEN BEGIN OF BLOCK CHECK1 WITH FRAME TITLE ext-t01.
*skip 1.
SELECTION-SCREEN BEGIN OF BLOCK CHECK2 WITH FRAME TITLE text-t00.
select-options: s_system for /BIC/AZSEUST0400-/BIC/ZSYSIDNT
no-extension no intervals .
parameters: P_USER type /BIC/OIZSECUNAME OBLIGATORY.
select-options: S_PROF for zsecurity-value_1 no intervals.
SELECTION-SCREEN PUSHBUTTON 60(20) BUT1 USER-COMMAND PROF
VISIBLE LENGTH 25.
SELECTION-SCREEN END OF BLOCK CHECK2.
PARAMETERS: P_AB RADIOBUTTON GROUP gr1,
P_CON RADIOBUTTON GROUP gr1.
SELECTION-SCREEN END OF BLOCK CHECK1.
Issue ********
No Issue ******** ( Outer block is comented)
*SELECTION-SCREEN BEGIN OF BLOCK CHECK1 WITH FRAME TITLE text-t01.
*skip 1.
SELECTION-SCREEN BEGIN OF BLOCK CHECK2 WITH FRAME TITLE text-t00.
select-options: s_system for /BIC/AZSEUST0400-/BIC/ZSYSIDNT
no-extension no intervals .
parameters: P_USER type /BIC/OIZSECUNAME OBLIGATORY.
select-options: S_PROF for zsecurity-value_1 no intervals.
SELECTION-SCREEN PUSHBUTTON 60(20) BUT1 USER-COMMAND PROF
VISIBLE LENGTH 25.
SELECTION-SCREEN END OF BLOCK CHECK2.
PARAMETERS: P_AB RADIOBUTTON GROUP gr1,
P_CON RADIOBUTTON GROUP gr1.
*SELECTION-SCREEN END OF BLOCK CHECK1.
End of Block2.
No Issue ********
I think I used several blocks with in blocks.. but I do not know why it is hapening.. in my case, i am fine with eliminating the outer block.. so removed and transporting it...
Message was edited by: Hari Kiran -
Control-click doesn't select multiple thumbnails?
Two of our workstations have recently lost the ability to control-click to select multiple thumbnails. Control-click works in other applications, including Windows Explorer, but control-clicking in the thumbnails pane in Acrobat simply selects the next thumbnail - it doesn't add to the current selection as it used to.
These workstations are running Acrobat Pro 9.4.5. They are fully updated. Any thoughts?Thank you so much. I did do a forum search but didn't find this. I appreciate you sending me in the right direction.
-
Pressing cntrl+left mouse click doesn't select multiple rows.
Hi,
I've got this problem after i migrated my form from 6i to 10g.
In 6i version, cntrl+left mouse click used to work in order to select multiple rows on the screen. But, it's not working in 10g.
Instead, Shit + left mouse click is working to select multiple rows in 10g.
Please can someone help me out with this. I want cntrl + left mouse click to work.
Any help will be appreciated.
Regards
NavnitHi Pradeep,
Thanks for your reply.
Do you mean fmrweb.res file?
This is the content of my res file
9 : 0 : "Tab" : 1 : "Next Field"
9 : 1 : "Shift+Tab" : 2 : "Previous Field"
116 : 0 : "F5" : 3 : "Clear Field"
38 : 0 : "Up" : 6 : "Up"
40 : 0 : "Down" : 7 : "Down"
33 : 0 : "PageUp" : 12 : "Scroll Up"
34 : 0 : "PageDown" : 13 : "Scroll Down"
69 : 2 : "Ctrl+E" : 22 : "Edit"
10 : 0 : "Return" : 27 : "Return"
76 : 2 : "Ctrl+L" : 29 : "List of Values"
115 : 0 : "F4" : 32 : "Exit"
75 : 2 : "Ctrl+K" : 35 : "Show Keys"
83 : 2 : "Ctrl+S" : 36 : "Commit"
118 : 1 : "Shift+F7" : 61 : "Next Primary Key"
117 : 0 : "F6" : 62 : "Clear Record"
38 : 2 : "Ctrl+Up" : 63 : "Delete Record"
117 : 1 : "Shift+F6" : 64 : "Duplicate Record"
40 : 2 : "Ctrl+Down" : 65 : "Insert Record"
119 : 1 : "Shift+F8" : 66 : "Next Set of Records"
1005 : 0 : "Down" : 67 : "Next Record"
1004 : 0 : "Up" : 68 : "Previous Record"
118 : 0 : "F7" : 69 : "Clear Block"
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
34 : 1 : "Shift+PageDown" : 71 : "Next Block"
33 : 1 : "Shift+PageUp" : 72 : "Previous Block"
116 : 1 : "Shift+F5" : 73 : "Duplicate Field"
119 : 0 : "F8" : 74 : "Clear Form"
122 : 0 : "F11" : 76 : "Enter Query"
122 : 2 : "Ctrl+F11" : 77 : "Execute Query"
69 : 3 : "Shift+Ctrl+E" : 78 : "Display Error"
80 : 2 : "Ctrl+P" : 79 : "Print"
123 : 0 : "F12" : 80 : "Count Query"
85 : 2 : "Ctrl+U" : 81 : "Update Record"
121 : 3 : "Shift+Ctrl+F10" : 82 : "Function 0"
112 : 3 : "Shift+Ctrl+F1" : 83 : "Function 1"
113 : 3 : "Shift+Ctrl+F2" : 84 : "Function 2"
114 : 3 : "Shift+Ctrl+F3" : 85 : "Function 3"
115 : 3 : "Shift+Ctrl+F4" : 86 : "Function 4"
116 : 3 : "Shift+Ctrl+F5" : 87 : "Function 5"
117 : 3 : "Shift+Ctrl+F6" : 88 : "Function 6"
118 : 3 : "Shift+Ctrl+F7" : 89 : "Function 7"
119 : 3 : "Shift+Ctrl+F8" : 90 : "Function 8"
120 : 3 : "Shift+Ctrl+F9" : 91 : "Function 9"
113 : 0 : "F2" : 95 : "List Tab Pages"
72 : 2 : "Ctrl+H" : 30 : "Help"
112 : 0 : "F1" : 30 : "Help"
I don't know what value should i enter for cntrl + left mouse click ?
Even for shift + left mouse click, row is not there but it's working.
Please tell if you know what row should i enter for cntrl + left mouse click in order for it to select mutliple rows?
Regards
Navnit -
In Pages 4x you could hold CTRL+LEFTMOUSE while in the margin area then select multiple things on that page you were looking by mousing over them (including selecting all). Now you have to go one item at a time to delete? Is there a work-around?
Ghazgkull wrote:
. ctrl+clicking in iTunes selects all.
No, it does not. You are still incorrect.
ctrl + click does NOT select anything.
It checks all boxes when you ctrl click on one box.
If you want to select a bunch of consecutive songs...
Select one then Shift click another, This will select all items from the first selection to the last selection.
This is just plain nutty and is normally achieved on Windows 7 using ctrl+a,
No it doesn't
ctrl + a selects all.
You are not selecting anything when you check all boxes. You are sinmply checking all boxes. -
How to 'Select All Layers' when background is locked?
I've just tried to Select > All Layers and was very surprised when the Background, a locked layer, was not included in the selection. Is it possible to select all layers, included the background?
This could be a tricky one and needs some explanation. I have about 1600 images to process. I would prefer to do so from within InDesign, to which the images are linked. I want to apply Smart Filters to all the images. That's only a part of the story, but it will do for the moment.
Method 1 and Why it Won't Work
I could apply a Smart Filter by choosing a certain image in InDesign; selecting Edit Original and the image opens in PS. Then I was hoping to use Select All Layers and apply a Smart Filter. But... Select All Layers doesn't select all layers, and you can't apply a Smart Filter unless all layers are selected.
Method 2 and Why it Won't Work
I could open the images within PS by using Open as Smart Object, which DOES select all the layers and allows you to apply a Smart Filter. But for a very good reason (I can explain the reason, but it would take a few more paragraphs), I want to open the images from within InDesign. So, method 2 is unsuitable.
Method 3 and Why it Won't Work
I could batch all the images using an Action to unlock the Background. But, not all my 1600 images have a background. Some have ordinary unlocked layers, some have text layers. I could set up an Action to unlock Background layers (double-click, followed by a Return to name the layer "layer 0"), but if the Action came across a text layer on the bottom -- big problem. For a text layer, double-click followed by a Return does nothing. I'd have one locked-up Action.
Method 4 - A script working from within InDesign could open the images as Smart Objects -- but I'm not a script man.
Seems a bit silly that Select All Layers doesn't allow me to select all layers. -
Using Select all to create multiple lines in a sales order
Hello SAP experts,
In our business practice users create multiple line sales orders with reference to contracts and use the copy paste method and then assign each line to the contract manually.
After a few years of this practice i found a new way to create multiple lines but it doesn't quite work correctly. When you have created the first line of an order if you click on the select all button the system will ask you how many lines do you want to copy. I don't know if this is standard SAP but 3 things don't happen when we use this 1) The schedule line information is blank 2) conditions do not copy from the contract even though the contract has been referenced. 3) Since there is no schedule line information the order fails when saving and we get a update terminated message.
I am having problems finding any documentation around this function so any help with this would be greatly appreciated.
error when updating is
Transaction.. VA01
Update key... 4D358878A8B601AAE10080000A2C4982
Generated.... 28.01.2011, 13:47:23
Completed.... 28.01.2011, 13:47:23
Error Info... 00 671: ABAP/4 processor: GETWA_NOT_ASSIGNEDGETWA_NOT_ASSIGNED
Many threads are there on this error message and you would come to know if you google with this text. Check couple of threads where the same topic was discussed
[Re: GETWA_NOT_ASSIGNED|Re: GETWA_NOT_ASSIGNED;
[Re: GETWA_NOT_ASSIGNED ABAP Dump|GETWA_NOT_ASSIGNED ABAP Dump;
Also there are some 20 OSS notes on this error message and you can have a look at the following notes:-
1) Note 913679 - VA01: Short Dump GETWA_NOT_ASSIGNED on click of quantity.
2) Note 591955 - ABAP runtime error GETWA_NOT_ASSIGNED
3) Note 870670 - SD_SALES_DOCU_MAINTAIN_DIALOG termination with GETWA_NOT_***
4) Note 141314 - VA02: Dump with 'GETWA_NOT_ASSIGNED'
thanks
G. Lakshmipathi
Maybe you are looking for
-
Will there be a carrier profile update for T-Mobile on the iPhone 5?
Will there be a carrier update any time soon for T-Mobile on the iPhone 5?
-
I'm not sure I properly asked my question. I have a need to post a resume to an employer who requires that the information be submitted via Internet Explorer. My OSX vs 10.4.11 will not accept downloads of the current IE version and Microsoft no long
-
First Record is repeated twice in main window of script
Dear All, I am developing a Script form, which contains 3 windows Header,Main and Footer. My Problem is that in Main window the first record is repeated twice and the remaining all records are ok. I am unable to solve this issue of stopping the dupli
-
Hi, I am new to UIX/JDeveloper and having a problem with MessageRadioSet-PPR. I am using switcher with two cases. I am not able to set up an event for it, so that it will change itself. If I put the childdata name myself it works fine. Can anyone tel
-
Autofill works for forms with autocomplete="off"
From what I can grasp here: https://developer.mozilla.org/en-US/Firefox/Releases/30/Site_Compatibility#Security If a field or form has autocomplete="off" set, the password manager should prompt the user to save the password, but the password can not