Triple display on W520

My brother ordered a W520 with the 1920x1080p screen option. He has two Dell 20" (1600x1200) monitors from years ago, which have DVI & VGA connectors.
Can the W520 run in triple display mode, with built in display, one monitor hooked up with VGA cable, and the other monitor hooked up with Displayport to DVI cable?
Or does this require some kind of dock? Or at the very least, can it run on two monitors with the lid closed?
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |
Solved!
Go to Solution.

Hi, Volt,
    This subject has been explored in depth on this board. To keep it short, yes, you can indeed drive two external monitors at the resolutions you mentioned without the dock, plus the internal makes three.
    For more, check out this thread (among others):
Monitor madness    
                                                Best!

Similar Messages

  • Problems Setting up triple Display

    Hi Folks, after some help
    Recently tried setting up a triple display set up on Mac pro with ATI Radeon HD 5770 from the single display previously used.
    I have 2 new Samsung B1930 monitors connected through Mini Display Port to VGA apple connectors in the 2 Slots and my old Samsung B2430 connected up through the DVI.
    What i hoped to achieve is
    Left B1930 extended desktop                                
    Middle: B2430 Main screen with Dock etc
    Right B1930 Extended Screen
    What i have is the left B1930 as the main screen (inc Dock) and the Middle B2430 and righ B1930 as the extension.  Is it only possible to extend one way? or is there a way to extend left and right.
    Cheers in advance

    Ignore, completely thick user! Put your glasses on and Drag the white bar.  Does blaming a small 19" monitor help

  • Is is possible to Triple Display from the New MacMini

    Is it possible to run a triple display on a MacMini with the intel HD 4000 chipset (which according to Intel is triple monitor capable).
    I would assume one display would run off the HDMI and the other two from the Thunderbolt Port.
    If it is possible three displays, is it possible to daisy chain two MiniDisplayport monitors from the Thunderbolt port. I know it will run one MiniDP but am unsure if it will run 2.

    You can use a splitter for one output but yo have top mirror those displays.
    You need a USB video adopter like this one to add a third independent monitor
    http://www.tuaw.com/2013/05/11/kensington-usb-3-0-multi-display-adapter/
    or
    http://www.ebay.com/itm/390717555128?redirect=mobile

  • T420 - Triple display not working

    So, according to this page: http://www-307.ibm.com/pc/support/site.wss/MIGR-76617.html , the T420 I have is supposed to support two external displays as well as the laptop display as follows:
    ThinkPad-only Triple Display Configuration:
    1st Display: Active ThinkPad display
    2nd Display: VGA analog monitor attached to the ThinkPad VGA analog port.
    3rd Display: DisplayPort monitor attached to the ThinkPad DisplayPort
    However, when I connect both external displays, it will switch off one of the external monitors (the first one connected).
    Using display port to HDMI cable for monitor 1, VGA for monitor 2.  Both are verified working as external monitors with the T420, just not at the same time.
    I've looked through the BIOS and display properties to no avail.
    Is this actually possible without a docking station?
    -B

    Only a laptop with a discrete NVIDIA graphics card, will support those configurations. If you just have the onboard Intel graphics, then I bet you'll only be able to drive two without a dock. With a dock, you still may be able to drive three monitors (including the ThinkPad's LCD).
    BTW, I found even with an NVIDIA discrete graphics option, that page you refer to is incorrect (else I have a problem with my docking station). It says you can drive three monitors with "Any combination of the following" when after much trial and error, I determiend one has to be a VGA analog connection. 

  • Triple Display Stand

    Hi there, has anyone found a triple display stand with a desk mount, to hold three 24" displays,

    Hi, Volt,
        This subject has been explored in depth on this board. To keep it short, yes, you can indeed drive two external monitors at the resolutions you mentioned without the dock, plus the internal makes three.
        For more, check out this thread (among others):
    Monitor madness    
                                                    Best!

  • Is it possible to triple display a new macbook pro with retina display?

    I'm looking to triple screen a new retina display macbook pro 15".
    I have
    a desktop iMac
    sansung external monitor
    soon macbook pro 15" with retina display.
    is it possible to connect all 3? ... or at least use my macbook pro as the base (lid closed), and the iMac and Sansun as the 2 externals?  please let me know!

    iMAC
    Model Name:          iMac
      Model Identifier:          iMac10,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          12 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          IM101.00CC.B00
      SMC Version (system):          1.52f9
      Serial Number (system):          W801****5PC
      Thunderbolt:          No hardware was found.
    SAMSUNG Monitor:
    generic RGB, and VGA input
    does that help at all?
    <Edited by Host>

  • Dual/Triple Displays on MacBook Pro 9,1 (Matrox?)

    I just picked up a MacBook Pro (Model MD103LL/A) last night and I'd like to hook up two to three 23" LG DVI displays. I'm told the Matrox Dual or Triple Head2Go adapters will work, but there are mixed reviews from Mac owners on newegg and amazon. I'd love to hear from other MacBook Pro users who have used this setup to drive multiple monitors. Also, I'm wondering if a GT650 with 512MBs of memory can handle three monitors.
    Please post your comments here. Thanks for your help.

    Got w7 install disc working again, installed everything again, ran apple updates agian, and now windows freezes on boot again.  I have a feeling the latest windows iTunes update is the culprit somehow (when my machine bugged out initially that was the only bootcamp related software I updated).

  • Triple Display layout

    No resolution yet on the issue of a white screen on Digital Cinema Desktop Preview, whichever way I configure the displays it happens each time and on each display, it does however play normally when set to desktop preview - Main. Can anyone please help? I feel sure it's an FCP setting but I just can't find it.
    I also can't get my Sony HDV deck to appear as an option in the Video Playback list, all HDV options are grayed out with only the desktop previews available. Anyone know how I can run the feed through the deck?
    Thanks to anyone with a suggestion!

    Philip,
    I used to experience the white screen issue that you described with my triple head display setup, but I was able to find a fix!
    I'll walk you through a fix:
    1. Determine which video card is your "primary" card. To determine this, reboot your Mac. Make a note of which display shows the white screen with the Apple logo. Trace the cable back to the video card installed in your Mac. This video card is your primary card. You may wish to mark it for future reference.
    2. Make sure you have two monitors connected to your primary card and your third display connected to your secondary video card.
    3. Launch Final Cut Pro. Make sure that the main interface launches and is displayed on one of the monitors connected to your primary video card. For me, my interface launches on the display connected to the primary video card that does NOT display the white screen with the Apple logo on startup.
    4. Enable Digital Cinema Desktop Preview. The cinema desktop preview should appear on your display connected to your primary video card that shows the white apple logo on startup.
    Everything should work. Now you should be able to drag interface elements like the Browser bin to the third display that is connected to your secondary video card.
    In your case you have two identical cards. But what do you do if you have one basic card and one powerful video card? First you need to make sure that your Mac sees the powerful video card as the primary video card. When you boot your Mac, make sure the white apple logo screen appears on one of the displays connected to your powerful video card. If not, follow these steps...
    1. Shutdown your Mac.
    2. Physically remove the basic (less powerful video card). Don't just unplug the monitor. You have to remove the video card.
    3. Boot your Mac with only the powerful video card installed. Note which monitor displays the white logo screen.
    4. Go into your display preferences and arrange them. Make the white logo display the one that does NOT have the menu bar.
    5. Shutdown your Mac.
    6. Reinstall your basic video card into the same slot from which you removed it.
    7. Boot your Mac. Note that the white logo screen should now appear on the same monitor in step 3 that is connected to your powerful video card.
    8. That's it. Now your Mac should always boot using your powerful video card as the primary display card. You should also be able to use triple head display with Final Cut Pro.

  • Triple Display Issue with OSX Lion

    I have the following setup:
    iMac OSX (Snow Leopard)
    3.06 GHz Intel Core i3
    4GB 1333 MHz DDR3
    500GB Hard Drive
    I have 3 monitors hooked up, one is a 24 inch benQ through mini display with vga and then i have the 21.5 imac and then a 23 inch acer hooked up with an external usb video card usb to dvi. I had this setup before lion was released when i was using snow leopard and it worked perfectly fine, but now with the lion update it does not work the screen just continuiously flickers on and off; i tried swapping monitors and it still doesnt work so it has to do with a possible software issue.
    I have updated to the latest drivers, installed restarted and everything i can think of; does anyone have any suggestions?
    This is a video I made of my issue:
    http://www.youtube.com/watch?v=h23Rtkfiuq8&feature=channel_video_title
    If anyone can help i would GREATLY appreciate it!

    I'm pretty sure its not a monitor issue, as the issues vary between monitors
    I'm pretty sure this is a display and adapter and interface problem, especially when the name(s) of your display(s)  show up wrong after sleep.
    The Mac uses one display driver that is highly parameterized. The parameters to be used are set by sending a query to the display for its name and capabilities. This query is sent on the secondary digital data channel, and is sometimes referred to as EDID data.
    Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
    When the name of the display is not correctly reflected in the name of its Display Preferences pane, that is a direct indication the display-adapter-cable-display part of the chain "dropped the ball" in resounding to the Mac's query for capabilities.
    Adapters that do not pass the EDID data through, and displays that do not answer when queried for their name and capabilities are the primary source of problems. For example, TV sets that are not "paying attention" to the secondary data channel, and therefore do not answer the query, drive Mac users crazy.
    The query is sent in response to four different events:
    • System Startup
    • wake form sleep
    • cable insertion at the Mac-end (not necessarily at the Display-end)
    • The use of the Option-Detect_Displays button in Displays Preferences window

  • Triple Display Issue

    I have the following setup:
    iMac OSX (Snow Leopard)
    3.06 GHz Intel Core i3
    4GB 1333 MHz DDR3
    500GB Hard Drive
    I have 3 monitors hooked up, one is a 24 inch benQ through mini display with vga and then i have the 21.5 imac and then a 23 inch acer hooked up with an external usb video card usb to dvi. I had this setup before lion was released when i was using snow leopard and it worked perfectly fine, but now with the lion update it does not work the screen just continuiously flickers on and off; i tried swapping monitors and it still doesnt work so it has to do with a possible software issue.
    I have updated to the latest drivers, installed restarted and everything i can think of; does anyone have any suggestions?
    This is a video I made of my issue:
    http://www.youtube.com/watch?v=h23Rtkfiuq8&feature=channel_video_title
    If anyone can help i would GREATLY appreciate it!

    I'm pretty sure its not a monitor issue, as the issues vary between monitors
    I'm pretty sure this is a display and adapter and interface problem, especially when the name(s) of your display(s)  show up wrong after sleep.
    The Mac uses one display driver that is highly parameterized. The parameters to be used are set by sending a query to the display for its name and capabilities. This query is sent on the secondary digital data channel, and is sometimes referred to as EDID data.
    Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
    When the name of the display is not correctly reflected in the name of its Display Preferences pane, that is a direct indication the display-adapter-cable-display part of the chain "dropped the ball" in resounding to the Mac's query for capabilities.
    Adapters that do not pass the EDID data through, and displays that do not answer when queried for their name and capabilities are the primary source of problems. For example, TV sets that are not "paying attention" to the secondary data channel, and therefore do not answer the query, drive Mac users crazy.
    The query is sent in response to four different events:
    • System Startup
    • wake form sleep
    • cable insertion at the Mac-end (not necessarily at the Display-end)
    • The use of the Option-Detect_Displays button in Displays Preferences window

  • Triple display setup?

    Hi!
    I'm building a Digital Audio Workstation system with 3 x 19"
    (1280x1024) LCD Display's. Due to a noise-free reasons,
    computer is located in another room 15m away. I have VGA Analog Extension cables.
    Do you have any solution (suitable graphic card) for 3x analog VGA monitors.
    I need a graphic card to feed 3 Analog VGA displays.
    Thank you!
    Best Regards,
    Dali

    The cheap solution would probably be to use a standard dual-head AGP (or PCI-e if you prefer) card,
    and get a PCI graphics card to use with the third head. You don't need multiple PCI-e slots just to get
    more heads - although you might want to check for card compatibility (it might be wise to stick to all
    nVidia or all ATi, at least). I use a single AGP 3Dlabs card for two heads at home, and a PCI GeForce FX5200 for a third head. Obviously the performance of the PCI card suffers (surround gaming won't be
    up to Matrox levels), but it doesn't sound like you need that. For this reason, I'm hoping people aren't going to stop producing PCI graphics cards any time soon (multi-head is convenient), but I'm wary everyone is going to transition to PCI-e and leave us multi-headers a bit stranded.
    Alternatively, some motherboards with integrated graphics let you use the graphics in combination
    with the main slot, which would mean all your PCI slots stay free. There's a new motherboard out
    with a PCI-e *and* an AGP slot, plus integrated graphics, which claims five head support (two heads
    on each card + integrated at the same time); The Inquirer mentioned it recently. It's quite possible
    to do 5 heads with several PCI cards with a much less esoteric setup (or dual-PCI-e), but this might
    be easier and certainly perform better than the PCI solution. Windows has had support for up to ten heads for some time, by the way - although some applications get confused with even two.
    On the PCI-e front, it should be possible to stick multiple cards in to any multi-PCI-e slot system; you
    just need an adaptor between the slots (although I've not seen one). It's entirely a physical adaptor
    - the cards should negotiate down to a single link on their own. You don't need an "SLi" motherboard (except for performance - and, obviously, you won't be able to use multiple cards to accelerate a single display in an SLi fashion); any board with multiple slots should do. That's theoretical, though - make sure you can find an adaptor before trusting to that advice!
    I hope that helps. Matrox (and nVidia) do good multi-head solutions, but they're quite expensive for what they are; if you have a machine to start with, I suspect a PCI card might be a cheaper upgrade path, and probably wiill do what you want.
    Oh - on the other hand, a 15m cable (even good quality) is going to be on the limit (I don't know if you've tried it yet). Matrox do have particularly good RAMDACs, which might help offset the cable length. Have you considered putting together a fanless machine (or even an old laptop or two) and running VNC (or remote desktop)? If you don't need massive performance, you might get better image quality. A second hand laptop with VGA out and a couple of VGA PCMCIA cards might be worthwhile if you can't get the video stable at that range - plus you might get the laptop's own display. That's probably overkill if there's a chance of the analogue signal coping, but I'd be nervous until I'd tried it. You *might* do better with DVI, but you'd be out of spec on the length; at least the TFTs - if they can lock onto the signal at all - ought to clean it up for you when they sample it. Just a thought from the paranoid. :-)
    Best of luck!
    Andrew Garrard
    IBM T221 driven from 2 DVI inputs
    AGP 3Dlabs VP990 providing said two DVI signals
    Iiyama VMPro 454
    PCI GeForce FX5200 driving Iiyama (analogue)
    Very loud computer
    Even louder PCI-e solution on order :-)

  • IMac triple display

    I have an iMac G5 and 2 old(ish) LCD monitors and I want to hook all three up to make to have the iMac be the center monitor and one of the LCDs on each side. Now the standard DVI port doesn't plug into the iMac because the iMac only takes mini DVI. So what I was thinking was:
    1. Take a mini DVI to DVI converter plugged into the iMac.
    2. Have a DVI splitter converting the DVI output from the converter into two ports.
    3. Plug one of the LCDs into each port
    Thanks

    There is no official way to do that with an iMac G5. There is a hack that enables screen spanning on Macs where that capability exists in hardware but was not enabled by Apple.
    http://rutemoeller.com/mp/ibook/ibook_e.html
    If you click on the link that shows supported Macs, the G5 iMacs are listed. However, this is unsupported and the description says nothing about it being compatible with Leopard.
    Also, there is no way to connect TWO external displays to an iMac. Well, there is a way, but one of those two display will have to a fully functioning computer. Then you can use VNC and this clever program to add a another display.
    http://www.screenrecycler.com/home.html

  • Triple Display issue Mac Pro 4.1, GTX660, GT120.

    Hi guys.
    I have a mac pro 4.1 with a GTX 660 and a stock GT 120.
    The 660 has 2 x DVI, 1x HDMI, 1x Displayport
    The GT 120 has 1x MiniDp 1x DVI.
    I have both NVIDIA drivers and stock drivers.
    I've recently received a Dell U3011 2560 x 1600 to compliment my 2 20 inch 1600 x 1200 monitors.
    I plan to have the 20's flank the u3011 in portrait on either side to create a PLP setup.
    The problem is that I can't get them all to work together.
    Most of the time the monitor on the left isn't recognised (in system information it is described as color LCD display) and displays a resolution of 480 x 640. The other two monitors will work fine.
    If I fiddle with the video outputs on 660 and 120 (mix them up, use adapters etc) I can get all three monitors to display their correct resolution, But if the computer sleeps or is restarted it goes back to low resolution on one monitor and doesn't display an image at all and goes to sleep.
    The U3011 is always recognised at its correct resolution via displayport.
    Other two are connected to DVI1 on the 660 and the DVI on GT120
    Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
    What it is at the moment:
    What it was before I had the 30 and was using a 24:
    I'm pretty sure its not a monitor issue, as the issues vary between monitors (depending on which is plugged in where)
    I'd prefer to resolve this issue by running everything off the 660, allowing me to remove the GT120.
    Any help would be much appreciated.
    Cheers.

    I'm pretty sure its not a monitor issue, as the issues vary between monitors
    I'm pretty sure this is a display and adapter and interface problem, especially when the name(s) of your display(s)  show up wrong after sleep.
    The Mac uses one display driver that is highly parameterized. The parameters to be used are set by sending a query to the display for its name and capabilities. This query is sent on the secondary digital data channel, and is sometimes referred to as EDID data.
    Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
    When the name of the display is not correctly reflected in the name of its Display Preferences pane, that is a direct indication the display-adapter-cable-display part of the chain "dropped the ball" in resounding to the Mac's query for capabilities.
    Adapters that do not pass the EDID data through, and displays that do not answer when queried for their name and capabilities are the primary source of problems. For example, TV sets that are not "paying attention" to the secondary data channel, and therefore do not answer the query, drive Mac users crazy.
    The query is sent in response to four different events:
    • System Startup
    • wake form sleep
    • cable insertion at the Mac-end (not necessarily at the Display-end)
    • The use of the Option-Detect_Displays button in Displays Preferences window

  • Aperture with triple display?

    Does anyone use Aperture with three monitors? I just connected a third display and Aperture seems confused and there seem to be bugs.
    "Secondary display" seems to mean two rightmost monitors for me.
    When cropping, I sometimes see the same crop box on both of them, but with different photos?
    I'd like Aperture to just forget the third display — is that possible?

    Regrettably, I was having the same issue. I would have been fine having Aperture 3 leave my third monitor alone. DVD player, iTunes, Hulu, Front Row, etc. all seem to "mute' that third monitor, but I had a number of bugs including hanging and crashes.
    I was using a displaylink USB card, which may have been partly to blame. Best to get feedback from someone running a Mac Pro, or someone with a MBP that has an more supported express card and video driver combination.
    I ended up having to remember to unplug the adapter before I launched Aperture 2. I scrapped the two monitors for a large monitor for that reason shortly before Aperture 3 came out.

  • Triple display adapters?

    I have a 2010 Mac Pro with the 5870 GPU.
    My displays are:
    - 27" Apple
    - 2x 23" DVI LG
    I could use some help in figuring out which adapters will allow me to run all three.
    Thanks!

    HT4279- Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    The Apple 27 inch has a Mini DisplayPort that plugs right in.
    The first of those DVI displays connects to the DVI port. 
    Short term:  Since it is only 23 wide, it is likely to be under 1920 wide, and can use a single-Link DVI cable to save money now (but the cable will not be useful for a wider display later.)
    Long Term: Shop REALLY hard for a Dual-Link DVI cable that is also cheap.
    The second DVI display will need an adapter or a converter.
    Short Term: Mini DisplayPort to Single-Link DVI adapter is all you need for now. That adapter is MUCH cheaper because it forces the Mini DisplayPort into "Single-Link DVI compatability mode"
    Long Term: If you ever want to run 3 DVI displays, you may have to spring for the Dual-Link converter. But the cost is so much higher I would wait until you were forced to do it.

Maybe you are looking for