Trivial expenses incurred during a customer project
Hi,
how to enter in expenses ( like auto mileage, meals, taxi, parking) after a Customer Project is done
so that we can bill the Customer for this and at the same time, reimburse the Engineers working on
the project for these expenses?
My client wants to do this without implementing the Travel Management module or tying in the HR module.
I've looked into overhead cost and costing but it seems like one has to know the expenses and amount
ahead of time. But for our case, we only know the expenses amount AFTER the project is done.
Is there a way of tying this in with the Sales Order and Customer project so we can do reporting later
instead of doing a manual General Ledger posting?
Thanks.
Any suggests?
Similar Messages
-
Profit Centers & Customer Project
Hi Experts
I have a question in regards to profit center. I have a customer who has multiple org unit each been a profit center & cost center. Within each org unit there are a number of employee. Employees are attached to labor resource rates
If you create a customer project which requires the services of multiple employee across the organisation will the revenue and cost generated by the employee (though time confirmation against a project task ) be attributed to the employees org unit?
Org unit 1 = Person A Senior Consultant cost rate 100 Hr, Revenue Rate 200 Hr
Org unit 2 = Person B Journo Consultant cost rate 80 Hr, Revenue Rate 150 Hr
Thank you for your help in advanceHi Dan,
Thanks for the response. The following is the what I can see in the system - based on the default settings as I havent made any changes:
Customer Project:
1.Timesheet hours get valuated and costs show up under 'Internal Services' and 'Deferred COGS'.
2. After Revenue Recognition, the costs get moved out of 'Deferred COGS' and and reversed against the original 'Internal Services'.
The above results in an equal debit and credit to 'Internal Services' so the Financial Statements have a net zero balance for this.
I was advised the following:
1. The above treatment is correct because timesheet allocations are not 'actual' costs and are only there to show up on Project Reports to show standard costs.
2. The actual 'labour costs' would only show up following a payroll journal.
I am not convinced with the advice provided as I would like to see the standard costs on the Income Statement - which I would then net against the payroll journal and account for the difference in a 'recovery' account.
I think your suggestion about the 'offset' and 'expense' account netting themselves may explain the situation, but I dont know how to fix this. -
PS module ---Functional steps in Investment and Customer Projects in PS
Hi Experts,
I am new in PS module,Pls tell the steps in----->
1>Investment Project---The steps and transactions in PS according to Flow of PS module in Investment project from start till end of PS.
2>Customer Project--The steps and transactions in PS according to Flow of PS module in Customer Project from start till end of PS.
I want to know functionally how the above Projects operate differently functionally with transactions and Flow.
Regards,
RahulHi Rahul,
In addition to link provided above , please have a look on functional steps for Typical Investment & Customer project scenarios as follows.
Investment Project
1. Create a suitable WBS using Project builder.
2. Plan basic dates manually for WBS elements using Project planning board
3. Plan costs manually for WBs elements using Easy cost planning
4. Budget WBS elements
5. Enter actual dates during the project execution phase.
6. Assign various documents for WBS elements using Execution Services for updating commitment &
actual costs.
7. Calculate overhead costs & carry out settlement to assets under construction or completed asset in
Asset accounting.
Customer Project
1. Create a customer inquiry in SD.
2. Create a project (WBS & Network) using standard structures
3. Plan dates using Scheduling
4. Plan Resources
5. Plan materials by transferring Bills of Material
6. Plan costs using Network costing
7. Create sales pricing data ( Create quotation bases on project cost plan,Plan revenues for project)
8. Create a sales order with a bliing plan in SD
9. Create confirmations ( using CATS)
10. Purchase matetrials & services.
11. Document variance usign claims
12. Post Revenues using Milestone billing
13. Calculate overhead costs,carry out a results analysis & settle results analysis values to profitability
segment.
Regards
Tushar -
After Settlement, Cost not transfer from one WBS to another WBS in customer project
Hello Experts,
I am trying to settle cost from one WBS (i.e. XYZ-000014-1) to another WBS (i.e. XYZ-00001)in customer project.
Its a revenue type of project.
I have added 4 internal activities in an network under one WBS (i.e. XYZ-000014-1).
Got actual values after confirming activities, then settle that network cost on WBS (i.e. XYZ-000014-1) through CJ88.
Now while trying to settle that cost from WBS (i.e. XYZ-000014-1) to WBS (i.e. XYZ-00001) through CJ88, system not showing any result.
Kindly give ur valuable inputs.
Regards,Kindly tell me that is it a standard functionality of SAP that through CJ88 we can transfer cost from WBS to WBS.
Technically ,Yes.Cost is actually transferred from one cost object to another cost object.
I hv discuss the same with some of my frds ...some are denying the same that its not a standard functionality of SAP to transfer cost on same cost object.
Instead of 'transfer' I would rather use the word 'settlement' . Practically, they are right as projects-WBS are temporary endeavors of companies, and cost can not reside on WBS permanently as it has to settle to some entity (organizational unit) which can be accounted during the reconciliation of their chart of accounts and balance sheets.
SAP has provided us an option to settle our cost to WBS and hence its standard . Generally, we use it when we have 1 WBS at level 1 and all lower WBS's costs is settled to this WBS . Here, we specify Level 1 WBS as the receiver of cost of these lower WBS.
Hope,I am clear here.
Regards
Saurabh -
How to create the Custom project System as Web Project
Hi,
I have created a custom project system using this walkthrough. But
this walk through is targeting Visual C# project system. I need to create the Custom project system as Web project and set the start up page as index.html file. How can I achieve this?
Note:
I have got the Custom project system sample from VS2013 SDK samples(https://mpfproj12.codeplex.com/).
But it demonstrate the Custom console applications only.
- Abbas KHi,
So you didn't even follow this walkthrough yet? If you did, how did you do it?
I failed to create such a web project system because I finally messed up my VS experimental instance. But it's possible to create a custom web project system, by following this walkthrough. Someone else has successfully made it, check this
link.
The difference is that you have to use web project type instead of the console application project type. You could copy a web project's .csproj file into the VSPackage project and rename it to xxx.myproj. There's an error in the walkthrough that the AssemblyInfo.cs
file should be put into Properties folder and set the "Build Action" property to Content, "Include in VSIX" to true.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
ALUI Customization Deploying a Custom Project Step 2: Build and Deploy JARs
Hi,
I'm trying to deploy custom project after succesfully completing the installation and debug of AL UI Customization. As given in the documentation (see link below) in the step 2 Build and Deploy I see error given below on executing "ant install" command. Can somebody please identify the error in this?
http://edocs.bea.com/alui/devdoc/docs60/Plumtree_Development_Environment/UI_Customization/PlumtreeDevDoc_DevEnv_DeployProject_Java.htm
D:\plumtree_ui_source\portalui\6.1.x>ant install
Buildfile: build.xml
Trying to override old definition of task copy
global.init:
[copy] Warning: Could not find file D:\plumtree_ui_source\portalui\6.1.x\${
build.home}\thirdparty\ant-contrib\0.6\ant-contrib-0.6.jar to copy.
[echo] Ant Contrib successfully loaded.
[copy] Warning: Could not find file D:\plumtree_ui_source\portalui\6.1.x\${
build.home}\components\INTERNAL\ptanttasks\115250\cust\ptanttasks.jar to copy.
init:
[echo] Using ANT built-in compass loader
[copy] Warning: Could not find file D:\plumtree_ui_source\portalui\6.1.x\${
build.home}\components\RECENT\compass\LATEST\java-loader\compass-loader.jar to c
opy.
[echo]
[echo] Could not fine Socrates build location. Setting compass to
[echo] offline mode.
[echo]
[comp-loader] -----------------------------------------------------
[comp-loader] Compass Loader: <186756> (06/01/2005 12:52 PM)
[comp-loader] Storing loaded properties in System
[comp-loader] Stored 67 properties
[comp-loader] Loaded Compass ( 0 file(s) copied, 17 task(s) defined )
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 24 component(s)
[comp-props] [ customer-repo_ptwebui ]
[comp-props] Created Properties for 24 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 15 component(s)
[comp-props] [ customer-repo_ptwebui_dotnet ]
[comp-props] Created Properties for 15 component(s)
install:
Duplicated project name in import. Project global defined first in D:\plumtree_u
i_source\portalui\6.1.x\_buildcommon\scripts\ant\common\include\global.xml and a
gain in D:\plumtree_ui_source\portalproduct\6.1.x\_buildcommon\scripts\ant\commo
n\include\global.xml
Trying to override old definition of task uri://plumtree.com/ant/common/properti
es:definebasicprops
Trying to override old definition of task uri://plumtree.com/ant/common/properti
es:loadprojectproperties
Trying to override old definition of task uri://plumtree.com/ant/common/cp-stage
:loadcomponentprops
global.init:
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\thirdparty\ant-contrib\0.6\ant-contrib-0.6.jar to copy.
[echo] Ant Contrib successfully loaded.
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\components\INTERNAL\ptanttasks\115250\cust\ptanttasks.jar to co
py.
epglobal.init:
[echo] Using ANT built-in compass loader
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\components\RECENT\compass\LATEST\java-loader\compass-loader.jar
to copy.
[echo]
[echo] Could not fine Socrates build location. Setting compass to
[echo] offline mode.
[echo]
[comp-loader] -----------------------------------------------------
[comp-loader] Compass Loader: <186756> (06/01/2005 12:52 PM)
[comp-loader] Already loaded
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_nopull ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 29 component(s)
[comp-props] [ customer-repo_java ]
[comp-props] Created Properties for 29 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 14 component(s)
[comp-props] [ customer-repo_dotnet ]
[comp-props] Created Properties for 14 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_noarch ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 2 component(s)
[comp-props] [ customer-repo_win32 ]
[comp-props] Created Properties for 2 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_solaris32 ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_linux32 ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_aix32 ]
[comp-props] Created Properties for 1 component(s)
init:
clean:
[delete] Deleting directory D:\plumtree_ui_source\portalproduct\6.1.x\build
install:
[ant] Parent project doesn't contain any reference 'compass.loader'
global.init:
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\thirdparty\ant-contrib\0.6\ant-contrib-0.6.jar to copy.
[echo] Ant Contrib successfully loaded.
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\components\INTERNAL\ptanttasks\115250\cust\ptanttasks.jar to co
py.
epglobal.init:
[echo] Using ANT built-in compass loader
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\components\RECENT\compass\LATEST\java-loader\compass-loader.jar
to copy.
[echo]
[echo] Could not fine Socrates build location. Setting compass to
[echo] offline mode.
[echo]
[comp-loader] -----------------------------------------------------
[comp-loader] Compass Loader: <186756> (06/01/2005 12:52 PM)
[comp-loader] Already loaded
[mkdir] Created dir: D:\plumtree_ui_source\portalproduct\6.1.x\build\registe
rdir
[mkdir] Created dir: D:\plumtree_ui_source\portalproduct\6.1.x\build\feature
dir
[mkdir] Created dir: D:\plumtree_ui_source\portalproduct\6.1.x\build\install
code
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_nopull ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 29 component(s)
[comp-props] [ customer-repo_java ]
[comp-props] Created Properties for 29 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 14 component(s)
[comp-props] [ customer-repo_dotnet ]
[comp-props] Created Properties for 14 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_noarch ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 2 component(s)
[comp-props] [ customer-repo_win32 ]
[comp-props] Created Properties for 2 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_solaris32 ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_linux32 ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_aix32 ]
[comp-props] Created Properties for 1 component(s)
init:
[echo]
[echo] The property BuildEnvironment.IA_HOME either is not set
[echo] in your build.properties file or is set to an incorrect
[echo] location. You will be unable to build an installer. This
[echo] does not affect developer installations. Developers can
[echo] ignore this warning.
[echo]
[echo] Current value: ${BuildEnvironment.IA_HOME}
[echo]
build-registerscripts:
[echo] Environment variables necessary for versioning not set. BUILD_MAJOR
, BUILD_MINOR, BUILD_SERVICEPACK, and BUILD_HOTFIX must be set in order to get a
ccurate version information.
[devinstall] install-portalui-java
[fastmarshall] Parent project doesn't contain any reference 'compass.loader'
global.init:
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\thirdparty\ant-contrib\0.6\ant-contrib-0.6.jar to copy.
[echo] Ant Contrib successfully loaded.
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\${build.home}\components\INTERNAL\ptanttasks\115250\cust\ptanttasks.jar to co
py.
epglobal.init:
[echo] Using ANT built-in compass loader
[copy] Warning: Could not find file D:\plumtree_ui_source\portalproduct\6.1
.x\marshallcode\${build.home}\components\RECENT\compass\LATEST\java-loader\compa
ss-loader.jar to copy.
[echo]
[echo] Could not fine Socrates build location. Setting compass to
[echo] offline mode.
[echo]
[comp-loader] -----------------------------------------------------
[comp-loader] Compass Loader: <186756> (06/01/2005 12:52 PM)
[comp-loader] Already loaded
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_nopull ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 29 component(s)
[comp-props] [ customer-repo_java ]
[comp-props] Created Properties for 29 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 14 component(s)
[comp-props] [ customer-repo_dotnet ]
[comp-props] Created Properties for 14 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_noarch ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 2 component(s)
[comp-props] [ customer-repo_win32 ]
[comp-props] Created Properties for 2 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_solaris32 ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_linux32 ]
[comp-props] Created Properties for 1 component(s)
[comp-props] Version: <206776> (11/15/2005 11:59 AM)
[comp-props] [ general ]
[comp-props] Created Properties for 1 component(s)
[comp-props] [ customer-repo_aix32 ]
[comp-props] Created Properties for 1 component(s)
epmarshall.init:
[mkdir] Created dir: D:\plumtree_ui_source\portalproduct\6.1.x\build\warbuil
ddir
Trying to override old definition of task comp-collate
Trying to override old definition of task comp-stage
init:
epmarshall.marshall-java:
portalui.marshall-java:
[comp-collate] Version: <null> (null)
[comp-collate] Collate [java-portalui]
BUILD FAILED
D:\plumtree_ui_source\portalui\6.1.x\_buildcommon\scripts\ant\portalui\include\p
ortalui-dev.xml:34: The following error occurred while executing this line:
D:\plumtree_ui_source\portalproduct\6.1.x\devinstall.xml:1177: The following err
or occurred while executing this line:
D:\plumtree_ui_source\portalproduct\6.1.x\devinstall.xml:652: The following erro
r occurred while executing this line:
D:\plumtree_ui_source\portalproduct\6.1.x\devinstall.xml:733: The following erro
r occurred while executing this line:
D:\plumtree_ui_source\portalproduct\6.1.x\devinstall.xml:478: The following erro
r occurred while executing this line:
D:\plumtree_ui_source\portalproduct\6.1.x\marshallcode\marshall_portalui.xml:69:
No File: D:\bea\alui\_customer_repository\portalui\6.1.x\local\java-ptwebui\jav
a-ptwebui.mf
Total time: 1 minute 15 secondsaThanks for the help! It started building after commenting the DTD tag include in the xml.
But build failed with few warnings and errors.
two of the warnings are as follows (FYI I've compass folder as you suggested in other thread)
#1
[copy] Warning: Could not find file D:\plumtree_ui_source\portalui\6.1.x\pt
webui\portaluiinfrastructure\${build.home}\thirdparty\ant-contrib\0.6\ant-contri
b-0.6.jar to copy.
#2
Could not fine Socrates build location. Setting compass to
offline mode.
=============================
AND the ERROR message is as given below
precompile:
buildjava:
[javac] Compiling 154 source files to D:\plumtree_ui_source\portalui\6.1.x\ptwebui\portalpages\build\x86\classes\java
[javac] D:\plumtree_ui_source\portalui\6.1.x\ptwebui\portalpages\java\prod\src\com\plumtree\portalpages\condition\conditiontypes\ConditionTypeClientIPAddress.java:158: compareTo(java.lang.String) in java.lang.String cannot be applied to
(java.lang.Object)
[javac] if ("*".compareTo(arIPAddress) != 0 && ((XPConver
t.ToInteger(arIPAddress[i]) < 0) || ((i == 0) && (XPConvert.ToInteger(arIPAddres
s[i]) == 0)))) {
[javac] ^
[javac] Note: Some input files use or override a deprecated API.
[javac] Note: Recompile with -Xlint:deprecation for details.
[javac] 1 error
BUILD FAILED
D:\plumtree_ui_source\portalui\6.1.x\build_core.xml:103: The following error occurred while executing this line:
D:\plumtree_ui_source\portalui\6.1.x\ptwebui\build_core.xml:80: The following error occurred while executing this line:
D:\plumtree_ui_source\portalui\6.1.x\_buildcommon\scripts\ant\common\include\default-build.xml:142: The following error occurred while executing this line:
D:\plumtree_ui_source\portalui\6.1.x\_buildcommon\scripts\ant\common\antlib\java.xml:35: Compile failed; see the compiler error output for details. -
Can I set a custom project size in FCP-X? like 1920x320
Can I set a custom project size in FCP-X? like 1920x320
you can, choose 'Custom' in the Project settings.
Manual says:
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver4353c0d3 -
Setting up the correct custom project size size for keynote presentation in FCP 7 or motion?
Hi...anyone else do this?
I have been creating and editing films in FCP (not X) for years now and have got into creating the whole presentation for clients awards ceremonies etc. via Keynote on my iPad via HDMI to HD projectors and it looks amazing and is seamless on the night. No need for crappy powerpoint slides and jumping to low res DVD films - its all controlled via my iPad.
But i want to up the creativity of the presentations - at the moment we import the films as mp4 HD QT files and jpegs of the speakers/nominees/titles screens etc. created in Photoshop and put the whole thing together in Keynote on my iPad. It worked a treat and my clients love it!
Now i had a thought and did a test and created Motion graphics versions of the speakers titles and nominees screens in Apple Motion - so that they had an animated section at the start with whoosh audio stingers as they are played and not just stills - and then export them as QT files - import to FCP 7 timeline and export to compresser ready to convert to mp4 for Keynote.
This way i can extend the static part of the screen after the motion graphic part to say 10 mins as i never know how long the speaker will be on stage.
Then when the speaker moves on the next item i can hit the ipad which will move to the next presentaion screen!
Q. Now ive been doing these as HD 16:9 screens - but when imported to Keynote I have a white band top and bottom on the screen so i really need to start with a template screen size of 1024 x 768 for Keynote and also keep this size in FCP 7! And also export to Quicktime as the same size.
When i do static jpegs to import into Keynote i just define the pixel canvas size - 1024 x 768 @ 300dpi in Photoshop and it works fine but im not sure what to do in Motion or PCP as I have always created my films in 16:9 HD widescreen preset!
Anyone else doing this and got a solution to my problem and can help with custom project sizes in motion and FCP 7!1024x768 is 4x3. 2048x1536 is 4x3. Both of these are current display dimensions for iPads 1-3.
HD video (1920x1080 or 1280x720) is a 16x9 aspect ratio.
Try putting a rectangle in a square. Unless you scale the retangle up and lose image on the sides you will not be able to properly fill the entire 4x3 display area. The easy compromise is letterboxing to ensure all of the rectangle is display in the square. The iPad is doing this with very little effort on your part.
In FC you can create a new sequence and go into the settings and customize it to 1024x768, 2048x1536 or
just about any other dimension. Even If you create a custom sequence at 1024 or 2048 in FC you will see the same results that the iPad is giving you with much less effort, render and conversion time (presuming your keynote workspace cannot change in dimensions or aspect ratio and you are unwilling to crop your 16x9 aspect ratio video to fill the space.) -
How can i get "CRM JAVA CUSTOMER PROJECT 5.0"
Guys... how can i download the "CRM JAVA CUSTOMER PROJECT 5.0" package
Hello Christopher,
We are having difficulties in finding "CRM JAVA CUSTOMER PROJECT 5.0" too.
Could you please tell how to re-create the Software Component association?
Thanks and Regards,
Reena -
Asset Under Construction- Wrong assigned for a Customer Project
Hello,
For a customer project, the AUC is created automatically which is not right.
We did analyisfrom our end.
1. It's a customer project
2. Investment profile is not assigned at the project profile level since it's a customer project.
3. we tried creating a project using the same profile in QAS environment,but the AUC is not created
So, could anybody help us in knowing what could have gone wrong, it will help us in our analysis.
Regards,
NitinOk, the only way which I know where AUC gets created automatically for a WBSE is by assigning IM profile, but you say that your WBSE doesnt have IM profile. Check at the table level for the WBSE and see whether you can find the IM profile there or not. Also try to delete the AUC manually from asset transaction and see what message is getting issued.
What is your version of SAP? Also check the change documents, if you have activated, if someone has entered IM profile and later deleted, I can see some OSS notes for which AUC is not deleted even after removing IM profile from WBSE for versions like 4.6. -
Dear All,
i am working in customer projects. Actual cost and revenues r flowing.The RA key to the top WBS Element which is also billing element. I heve done the revenue based result anlaysis.Profit and loss are showing in RA. Now i want to settle the project to CO-PA.
Given settlement rule to top WBS Element and all other lower WBS element have profile not ot settle.if i run settlement CJ88 then nothing is flowing and not any error.
Need solution.Dear,
i m settleing the lower level WBS Element to top WBS Element which is billing element and result analysis is done for that top wbse .Then i want to settle the top wbse to profibility segement .Then after trying some config steps and defining PA transfer strature settlement of lower level wbse to upper level wbse is going well and accounting document is creating well.And CJI3 report its flowing well.
but in top WBSE the rule is profibility segment.I've done the result analysis and the net value (revenue-actual cost)
is also showing.That value is on the lower level wbse and that only value is going to TOP wbse after settlement.
but now i want to settle this top wbse but its showing no accured cost or revenue.
Is the process i m using is correct or i've to do it by some other method.The RA valuation method is revenue based.
sukhveer -
Display ALV on click of custom filed in custom project system report
Hi All,
Need your guidence.
I am working on custom project system drill down reports which is created using report painter CJE1/CJE2.
Requirement is to display one custom field in drill down output and on double click event of that custom field , need to display one ALV.
I am able to manage to add new custom field in output but not getting how to handle double click event as no user exit / or BADI getting triggered.
Please let me know is it possible to develop such scenario or not?
Thanks in advance.Hi Rachna,
First let us know is custom field z? or standard?
if z then for achieving this functionality please search same word key in abap forum as functionality is related to abap.
if standard then share few screenshot what is already exist and what you want to add.
Regards,
Sanjeev -
Reverse Charge up of budget again during settlement from project AUC to FA
With investment profile,
Charging up of budget during settlement from project AUC to FA is done,
In order to reverse the budger consumption, is it possible to reverse by FB08 for the AUC to FA posting
Or it must be done through adjustment?
Please includes steps and transactions used to achieve the reversal.
Edited by: Feng Hwa Hui on Aug 12, 2009 10:04 AMQuestion closed.
-
Settlement of customer project--without COPA
Hi guru's,
We do not have COPA in place here...so how to settle our project.
please provide me any revlevant doc regarding settlement from the config as well as execution of settlement point of view.
I need to sit with my CO consultant.
My counter part CO Consultant has not worked with PS integration so he is not having idea about the settlement for projects....i need to make him understand.
Please help me.Recommendations in Customer Projects
In customer projects, the actual costs are settled, but accrued amounts (such as costs of sales or inventory from which revenue can be generated) are not. You carry out this settlement at billing element level.
For customer projects which you settle in full to Profitability Analysis, it is a good idea to generate the settlement rule using a strategy defined in the IMG. The standard system we deliver includes a strategy for automatically generated settlement rules for customer projects.
The system uses this strategy to generate the following:
u2022 For all billing elements:
o Results analysis key
o Settlement to profitability segment
o A settlement profile providing for settlement in full
u2022 For all other WBS elements
o No results analysis key
o A settlement profile providing for no settlement
If account assignment elements within a billing structure do not contribute to the cost of sales, you can change the settlement rule manually.
If you maintain the settlement rule manually, we recommend you proceed as follows:
u2022 Use a project profile with a settlement profile that forbids settlement. This initially prevents settlement for all the WBS elements in the project.
u2022 Change the settlement profile in the billing elements manually. Define a settlement profile that permits settlement.
u2022 If you want to settle account assignment elements (in whole or in part), you must change the settlement profile for account assignment elements manually.
You change the settlement profile in the settlement rule for the object by choosing Goto Settlement parameters. There is a parameter in the settlement profile which you can use to define whether settlement is forbidden, allowed, or required.
Avoid making settlements within the project hierarchy. These can adversely affect system performance.
For more information on settling customer projects, refer to Settlement in Product Cost Controlling .
Regards,
ANSAR -
How to track the employee expense incurred by various employees
My Client want to track the employee expense incurred by various employees. We cannot use the Cost Centers as these are used by us for cost allocations for different business units.
In SAP ECC, there is some concept called internal order but how to manage in SAP Business one ? We are not using any HRMS add-on.
One alternative solution what we thought is ; Create employee as Vendor with seperate vendor group and restrict it in normal screens i.e. Purchase order/ AP InvoiceThe execute immediate is unnecessary and should be removed.
Then simply
for i in 1..o_emp.count loop
dbms_output.put_line(oemp(i).employee_id);
dbms_output.put_line(oemp(i).first_name);
end loop;
etc...
Sybrand Bakker
Senior Oracle DBA
Maybe you are looking for
-
How to change the size of the characters displayed on GUI screen?
Hi All, My problem is : the characters displayed on GUI screen are smaller than other associates when we are in same condition. Can anyone tell me what i should do to change the size? Thank you very much. Regards, Fiona
-
F101 list contain no data in posting tab
I have made the configuration for OBBV and OBBU for Chart of Accounts. When I execute F101 for regrouping of customers and vendors and tick generate postings, the list is getting generated. When I click the tab "Postings" it shows "Posting in Batch
-
Updating acrobat 6.0 to acrobat 9.0
i am trying to update acrobat 6.0 to acrobat 9.0 on my dell inspiron laptop. i dont have a serial number for acrobat 6.0 because it was installed on the computer when i got from dell about 4 yrs ago. i just recently started using the lap top because
-
Need suggestion to choose the Weblogic Edition
We are developing the Rich web application using ADF technology which has more number of pages (approx. 700 – 800) also expecting more no. of users (15K). 1.We want to know which weblogic edition (Enterprise or Suite) is suitable for production. 2.Is
-
String Start_Year = jComboBox2.getSelectedItem().toString(); i know thats the way to convert from a combo box to a string but how would i convert from a combo box to an int Thanking you in advance Steve