Trivial problem: SPAM/SAINt SP15

Hi,
Since the new marketplace has been released I'm not able to find SP15 for SPAM/SAINT (CRM 4.0 based on WAS6.20).
Can anybody tell me where the new download place for this SP is?
Brgds,
Jürgen Weiss.

Hello Jürgen,
I found it through: http://service.sap.com/swdc -> Download -> Support Packages & Patches -> My Application Components -> SAP SPAM/SAINT UPDATE.
Regards
Gregor

Similar Messages

  • SPAM/SAINT Version Updation Problem

    hi,
    I have installed ECC 5.0 and i have also updated the Kernel,
    but when i go to update the SPAM/SAINT Manager Version it shows that it requires at least 0018 Version of the Support Manager.
    Can any body please suggest that what is the process of upgrading the SPAM Manager and if there any downloads required to update the SPAM/SAINT Manager.
    It's Urgent.....!
    Regards,
    Ashish
    Edited by: Ashish Chugh on Feb 18, 2008 11:58 PM

    Hi,
    You need to download the patch for SPAM/SAINT upgrade.
    Http://service.sap.com/patces --> Enty by application group --> Additional components --> SPAM/SAINT update --> SPAM/SAINT update <version>
    Download the latest version.
    Uncar in /sapmnt/trans at OS level. Go to SPAM and click support package --> import SPAM/SAINT update
    Best Regards,
    Srividya.R

  • Problem faced while update to spam/saint version 39 basis realease 700

    Hi
    I am a SAP BASIS Administrator at fresher level.My spam/saint version was 22 when i applied SPAM/SAINT version 39 for SAP BASIS 700 , at first time it was not imported and struck at  *Movenamespace with return code zero* phase and the import log showed error at IMPORT_PROPER phase,
    But as described in the SAP note 822379 , i followed the instruction emptied the queue and imported the spam/saint version again
    This time the import was completed and showed a green status. But next time when i wanted to apply SAP_BASIS 10 support pacake immediately it showed an runtime syntax error.
    The error is as follows
    Runtime Errors         SYNTAX_ERROR
    Date and Time          02.03.2011 11:57:31
    |Short text                                                                               
    |    Syntax error in program "CL_OCS_RT_ANALYSIS============CP ".                                 
    |What happened?                                                                               
    |    Error in the ABAP Application Program                                                        
    |                                                                               
    |    The current ABAP program "SAPLSPAM" had to be terminated because it has                      
    |    come across a statement that unfortunately cannot be executed.                               
    |                                                                               
    |    The following syntax error occurred in program                                               
    |     "CL_OCS_RT_ANALYSIS============CP " in include                                              
    |     "CL_OCS_RT_ANALYSIS============CM002 " in                                                   
    |    line 135:                                                                               
    |    "Die Transformation "RTA_TRAFO" hat keine aktive Version."                                   
    |    " "                                                                               
    |    " "                                                                               
    |    " "                                                                               
    |                                                                               
    |    The include has been created and last changed by:                                            
    |    Created by: "SAP "                                                                           
    |    Last changed by: "SAP "                                                                      
    |                                                                               
    |Error analysis                                                                               
    |    The following syntax error was found in the program                                          
    |     CL_OCS_RT_ANALYSIS============CP :                                                          
    |    "Die Transformation "RTA_TRAFO" hat keine aktive Version."                                   
    |    " "                                                                               
    |    " "                                                                               
    |    " "                                                                               
    |Trigger Location of Runtime Error                                                                
    |    Program                                 SAPLSPAM                                             
    |    Include                                 LSPAMU69                                             
    |    Row                                     364                                                  
    |    Module type                             (FUNCTION)                                           
    |    Module Name                             SPAM_PROLOGUE                                        
    |Source Code Extract                                                                               
    |Line |SourceCde                                                                               
    334
    |  335|*       and set default start options according to the new scenario                        
    |  336|        CALL FUNCTION 'OCS_SET_DEFAULT_START_OPTIONS'                                      
    |  337|          EXPORTING                                                                        
    |  338|            iv_ocs_tool = lv_tcode                                                         
    |  339|            iv_scenario = lv_scenario                                                      
    |  340|            iv_save     = on                                                               
    |  341|          EXCEPTIONS                                                                       
    |  342|            OTHERS      = 0.                                                               
    343
    |  344|*       inform the user about the scenario change                                          
    |  345|        MESSAGE i336(tn) WITH lv_inact_scenario lv_scenario                                
    |  346|                         RAISING emergency_stop.                                           
    |  347|      ENDIF.   "sy-saprl(2) < '46'                                                         
    |  348|    ENDIF.                                                                               
    |  349|*   activate all halt points for current transaction                                       
    |  350|    UPDATE patstop SET cont_step = off                                                     
    |  351|                   WHERE ocs_tool = lv_tcode.                                              
    352
    |  353|*   initialize the application specific checks                                             
    |  354|    UPDATE patcheck SET ret_code   = space                                                 
    |  355|                        reason     = space                                                 
    |  356|                        message    = space                                                 
    |  357|                        ign_in_dia = off                                                   
    |  358|                        ign_in_btc = off                                                   
    |  359|                        queue_id   = lv_queue_id                                           
    |  360|                    WHERE ocs_tool = lv_tcode AND                                          
    |  361|                          active   = on.                                                   
    362
    |  363|*   collect some source data for the runtime analysis                                      
    |>>>>>|    CREATE OBJECT lr_rt_analysis                                                           
    |  365|      EXPORTING                                                                            
    |  366|        iv_queue_id = lv_queue_id                                                          
    |  367|      EXCEPTIONS                                                                           
    |  368|        others      = 99.                                                                  
    |  369|    IF sy-subrc = 0.                                                                       
    |  370|      CALL METHOD lr_rt_analysis->collect_conf_data                                        
    |  371|        EXPORTING                                                                          
    |  372|          iv_conf_group = 'ALL'                                                            
    |  373|        EXCEPTIONS                                                                         
    |  374|          OTHERS        = 0.                                                               
    |  375|      CALL METHOD lr_rt_analysis->save                                                     
    |  376|        EXCEPTIONS                                                                         
    |  377|          OTHERS = 0.                                                                      
    |  378|    ENDIF.                                                                               
    |  379|  ENDIF.                               "SY-SUBRC = 0                                       
    380
    |  381|* (5) now start with the application:                                                      
    |  382|* - set the OCS environment                                                                
    |  383|* - read the settings                                                                      
    Can anyone please suggest a bolution on BASIS perspective

    Hi all,
    Not sure if this thread is still active at all, but just to be sure, and to close it once and for all
    to solve this issue :
    Icheck class CL_OCS_RT_ANALYSIS in TA SE24 and go to method GET_XML.
    Search for RTA_TRAFO, jump to object via doubleclick and activate it.
    Afterwards install the latest TP and R3trans tools from sapnet, and SPAM should be working again.
    Best regards,
    Menno van Rooij

  • Problem updating spam/saint

    Hi all,
    While updating spam/saint i m getting following error.
    - Error in step: CHECK_REQUIREMENTS
    - Reason for error: TP_CANNOT_CONNECT_SYSTEM
    - Return code: 0212
    Any idea how to resolve this. This system is connected to another system in tms , the latter being domain controller. The tp versions in these 2 sys are diff. Can this be the prob..
    Any suggestion?
    Thanks,
    Ajith

    Hi,
    You didn't say what system you using ? Anyway, go into SM59 and find the RFC connections used for TMS(usually two) under ABAP  connections, try do a connection test, is it successful ? ..if not check technical settings are correct.
    See note 96907 for further troubleshooting.
    Nelis

  • NW70 EHP1 Update Problem w/SPAM/SAINT

    Hello,
    We have followed the guide for NW 7.0 EHP to update our system from NW 7.0 SPS18.  The kernel update appears to be successful, and system -> status tells us that we are on the 701 kernel.
    However, we are having trouble in SPAM/SAINT.  We've downloaded the latest 701/34 kernel and attempted to update spam, but once the update completes and we restart spam, it is still at 700/34 (not 701/34).
    Furthermore, we are able to load the 701 support packs from EPS/in, however, they never appear in SPAM or SAINT, and therefore they cannot be added to a queue and applied to the system.  SAINT complains that the components are "701" and basically are not appropriate to install in a "700" system.
    Obviously we are missing something here in the update process.  What does it take to get SAINT/SPAM to recognize the 701 support packs?  We've read through many docs and notes and have had no success.
    Thank you.

    Thanks for your help so far.
    We downloaded the NW7.0 EHP1 SP3 at this link: http://service.sap.com/sap/bc/bsp/spn/sps/index.do?pvnr=01200314690900000866
    I followed the stack guide at this link:  https://websmp207.sap-ag.de/~sapidb/011000358700000087932009E.PDF
    The downloads are:
    File                                              ;Description                                       ;Component Version                                 ;Instantiation                                     ;Instances                                        
    SAPK-70101INPIBASIS;PI_BASIS Support Package 01 for 7.01;PI_BASIS 7.01;;Application Server ABAP
    SAPK-70102INPIBASIS;PI_BASIS Support Package 02 for 7.01;PI_BASIS 7.01;;Application Server ABAP
    SAPK-70103INPIBASIS;PI_BASIS Support Package 03 for 7.01;PI_BASIS 7.01;;Application Server ABAP
    SAPKA70101;ABA Support Package 01 for 7.01;SAP ABA 7.01;;Application Server ABAP
    SAPKA70102;ABA Support Package 02 for 7.01;SAP ABA 7.01;;Application Server ABAP
    SAPKA70103;ABA Support Package 03 for 7.01;SAP ABA 7.01;;Application Server ABAP
    SAPKB70101;Basis Support Package 01 for 7.01;SAP BASIS 7.01;;Application Server ABAP
    SAPKB70102;Basis Support Package 02 for 7.01;SAP BASIS 7.01;;Application Server ABAP
    SAPKB70103;Basis Support Package 03 for 7.01;SAP BASIS 7.01;;Application Server ABAP
    SAPKW70101;BW Support Package 01 for 7.01;SAP BW 7.01;;Application Server ABAP
    SAPKW70102;BW Support Package 02 for 7.01;SAP BW 7.01;;Application Server ABAP
    SAPKW70103;BW Support Package 03 for 7.01;SAP BW 7.01;;Application Server ABAP
    igsexe_13-10003077.sar;Installation for SAP IGS integrated in SAP Kernel;SAP IGS 7.00;AIX 64bit;Application Server ABAP
    SAPEXE_23-10006210.SAR;Kernel Part I (for Basis 7.01);SAP KERNEL 7.01 64-BIT UNICODE;AIX 64bit/#Database independent;Application Server ABAP
    SAPEXEDB_23-10006211.SAR;Kernel Part II (for Basis 7.01);SAP KERNEL 7.01 64-BIT UNICODE;AIX 64bit/ORACLE;Application Server ABAP

  • Error in spam/saint update TP_CANNOT_CONNECT_SYSTEM TP_INTERFACE_FAILURE

    Dear All,
    while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
    the error details are
    The installation was stopped, since an error occurred during the phase
    CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
    resolve without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Continue in the queue display.
    The following details help you to analyze the problem:
        -   Error in phase: CHECK_REQUIREMENTS
        -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
        -   Return code:
        -   Error message: TP_INTERFACE_FAILURE
    Notes on phase CHECK_REQUIREMENTS
    n this phase the system checks the various requirements for the add
    nstallation. The following are reasons why this phase may fail:
       TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
       database.
       Check the action log (in the menu, choose Goto -> Action Log). Y
       may be able to use the detailed tp error message in this log to
       identify and remove the cause of the error.
       QUEUE_NOT_EMPTY: There are still OCS requests in the transport
       buffer which are not completed. You can show these requests with
       following tp command:
       tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
       These requests have to be completed or deleted from the buffer
       before you can continue importing the queue.
    o   CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
         Support Packages from the tp buffer.
         Check the action log (in the menu, choose Goto -> Action Log). You
         may be able to use the detailed tp error message in this log to
         identify and remove the cause of the error.
    The Add-On Installation Tool requires that the Change and Transport
    System (CTS) be configured correctly. For more detailed information,
    read the online documentation available from Help -> SAP Library ->
    mySAP Technology Components -> SAP Web Application Server -> BC Change
    and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
    please help me, its very important to complete this job i am in a critical position
    Thanks
    Senthil

    Dear,
    Please refer these links,
    tp_cannot_connect_system
    Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
    Regards,
    R.Brahmankar

  • Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION

    Dear All,
    While updating spam/ saint update I am facing  this error 
    Details of Error:
    The installation was stopped, since an error occurred during the phase
    DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Continue in the queue display.
    The following details help you to analyze the problem:
        -   Error in phase: DDIC_ACTIVATION
        -   Reason for error: TP_STEP_FAILURE
        -   Return code: 0008
        -   Error message:  tp step A, return code
            0008
    Notes on phase DDIC_ACTIVATION
    In this phase the system activates the imported Data Dictionary objects.
    This phase may terminate for several reasons:
    o   TP_INTERFACE_FAILURE: The system was unable to call the tp
         interface.
    o   TP_FAILURE: The system was unable to execute the tp program. For
         more information, see the SLOG or ALOG log file.
    o   TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
        activation successfully. To see the cause of the problem in the
        activation log, choose Logs.
        If you import two or more OCS packages in one installation queue,
        and activate the Data Dictionary objects in the incorrect sequence,
        this can cause errors. In this case, the activation errors disappear
        if you repeat the activation run. To do this, choose Continue.
    The Add-On Installation Tool requires that the Change and Transport
    System (CTS) be configured correctly. For more detailed information,
    read the online documentation available from Help -> SAP Library ->
    mySAP Technology Components -> SAP Web Application Server -> BC Change
    and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
    Please  help me
    Thanks
    Senthil

    Hi,
    i am having the same problem with SPAM
    Error in phase: DDIC_ACTIVATION                                                                               
    Reason for error: TP_STEP_FAILURE                                                                               
    Return code: 0008                                                                               
    Error message: OCS Package SAPKA70012, tp step A, return code
    0008  
    however i dont have the option to continue..  Please help
    thanks

  • SUM - SPAM/SAINT 7.3 Update using SQL2012

    Hi,
    I installed a SAP NW BW 7.3 in Windows Server 2012 / SQL 2012 and I'm trying to update SPAM/SAINT via SUM, but this errors occurs:
    1 ETQ359 RFC Login to: System="BWD", AsHost="atlas" Nr="00", GwHost="atlas", GwService="sapgw00"
    2 ETQ232 RFC Login succeeded
    4 ETQ010 Date & Time: 20140527175641 
    1 ETQ233 Calling function module "OCS_API_DELETE_QUEUE" by RFC
    1EETQ235 Call of function module "OCS_API_DELETE_QUEUE" by RFC failed (error-status "3")
    2EETQ360 RFC of "OCS_API_DELETE_QUEUE" failed:
    2EETQ361 code/exception  : 3
    2EETQ362 key             : DBIF_RSQL_SQL_ERROR
    2EETQ399 SQL error 515 while accessing table PAT05.
    4 ETQ010 Date & Time: 20140527175641 
    1EETQ399 Last error code set is: RFC error system BWD nr 00 function 'OCS_API_DELETE_QUEUE' failed with code 3 key DBIF_RSQL_SQL_ERROR: SQL error 515 while accessing table PAT05.
    1EETQ204 Upgrade phase "SPAMCHK_INI" aborted with severe errors ("20140527175641")
    And generate these two short dumps:
    1)
    Category               ABAP Server Resource Shortage
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Except.                CX_SY_OPEN_SQL_DB
    Date and Time          27.05.2014 18:32:53
    Short text
         SQL error 515 while accessing table "PAT05".
    What happened?
         Database error text: "Cannot insert the value NULL into column
          'DDIC_ACT_SUBSET', table 'BWD.bwd.PAT05'; column does not allow nulls. UPDATE
          fails."
    2)
    Category               ABAP Server Resource Shortage
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Except.                CX_SY_OPEN_SQL_DB
    Date and Time          27.05.2014 18:45:59
    Short text
         SQL error 515 while accessing table "PATHISTORY".
    What happened?
         Database error text: "Cannot insert the value NULL into column 'DACT_SUBSET',
          table 'BWD.bwd.PATHISTORY'; column does not allow nulls. INSERT fails."
    Can anyone help me?
    I didn't find any SAP note, or documentation about this problem.
    Thanks!
    Marcello

    Hi Reagan,
    I read this note, but the solution is to re-install the application.
    I will do this in last case.
    Thanks!

  • Update SPAM/SAINT package for release 7.00 terminated

    Hi All,
    We have installed solman 4.0 on windows environment. when i tried to import spam/saint update, it got terminated in the phase IMPORT_PROPER.
    Also, in SM50 it is showing on workprocess running for long and gets terminated. I also have run SGEN once my installation was over.
    0     DIA     4028     Running          Yes     649     SAPMS38L     000     DDIC     Delete     D010INC
    can anyone suggest what the problems would be..
    Thanks and Regards,
    sailesh K

    Hi
    I have tried three times. In fact I also restarted SAP System by changing rdisp/max_wp_runtime to 0 as there were lot of short dumps with timeouts.
    I notice that currently job RDDGEN0L is running at present.
    Also,
    1) Dialogue work process running Report SAPMS38L with action Delete on Table D0101NC (User DDIC).
    2) BGD Work process Status “On Hold” Reasn “RFC” with report SAPLSDDD (User DDIC).
    SPAM Status is "MOVE NAMETABS FINISHED WITH RETURN CODE 0". Import logs finished with error code 4.
    Regards
    Chandu
    P.S : FYI I am opening another thread with the same message.

  • Spam/Saint update failed

    Hello,
    My current SPAM/SAINT version is 20.
    I tried updating it to version 38.
    But while updaing m facing a runtime error  which is generating a short dump.
    Short Text of dump is as follows:
    Syntax error in program "CL_OCS_RT_ANALYSIS============CP
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLSPAM" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program
         "CL_OCS_RT_ANALYSIS============CP " in include
         "CL_OCS_RT_ANALYSIS============CM002 " in
        line 135:
        "Die Transformation "RTA_TRAFO" hat keine aktive Version."
        The include has been created and last changed by:
        *Created by: "SAP "    Last changed by: "SAP "*
    Below is the status of Import phase
    SPAM/SAINT update is being processed
    SPAM status: (Red)
    Import phase:     PROLOGUE
    Please help.
    Thanks Deepak

    I have similar problem, i have the following runtime error:
    The following syntax error occurred in program
    "CL_OCS_RT_ANALYSIS============CP " in include
    "CL_OCS_RT_ANALYSIS============CM002 " in
    line 13:
    "Type "OCSRT_TOOL" is unknown"
    I have create OSS-message and SAP reply;s:
    Regarding your issue, please transport the class CL_OCS_RT_ANALYSIS
    from other system in the landscape which is on the same release and
    support package level and with the SPAM\SAINT update version as the
    PRD system to the PRD system to resolve the syntax error.
    Once the syntax error is resolved in the PRD the SPAM\SAINT update can
    be continued in the SPAM to import the SPAM\SAINT update in the system.
    For more information please refer the link specified below for
    including the objects manually in the transport request.
    http://help.sap.com/saphelp_nw70/helpdata/en/57/38e2864eb711d182bf0000e829fbfe/content.htm
    I looked to the url, but still not understanding how to add it...can someone explain me how to export it?
    Thanks,
    Cheung

  • Error while confirming SPAM/SAINT patch through Solution Manager MOpz

    Hi,
    When I am confirming patches (release 700) in Solman through maintenance optimizer, it is allowing to confirm all except the SPAM/SAINT update version 700/0027.
    For the SPAM/SAINT patch, it is giving error "Object <some number> update error".
    Please let me know what to do.
    Thanks & Regards,
    Kunal.

    @sean i said him alternate way of downloading the patch of SPAM/SAINT 30 when he is unable to download from MOpz
    I always try to give alternate possible ways to resolve the problem.
    Regards
    Uday

  • Maintenance License not recognized by SPAM/SAINT

    Brand new installation. Generated keys. Imported using SLICENSE. I show a valid Maintenance License but when going into SPAM/SAINT I get an error saying it is not valid.
    I go to SDCCN and try to create a "Maintenace Package" task and get "No action possible" message.
    The hardware keys match.
    SAP Note 1280664 says to make sure that SM_<SID>CLNT<CLIENT>_BACK is available and working. This RFC is not in the system at all.
    GoTo > Settings > Task-specific brings up nothing at all.
    Does this connection have to be set up manually? or am I missing a major step somewhere?

    Hello Jeff,
    Please make sure that the maintenance certificate has been installed via t code SLICENCE manually.
    If this has been done, please follow the below steps.
    Please review the note Number 763561
    & follow the below steps:
    5.  Q: When trying to create a task in SDCCN an error message appears:
        ' No action possible '. Why can the task not be created?
        A: SDCCN has not yet been initialised correctly, and so the customizing for the tasks has not been filled yet.
        SDCCN can be initialised locally by following these steps:
    o  Ensure that the task processor job is deactivated, via SDCCN -> Goto -> Settings -> Task processor
    o  Then initialize the tool via SDCCN ->Utilities -> Activate.
    o  If the initialize was succesful you should get the following messages:
    Local initialization of new Service Data Control Center
       Activation successful
       Destination to SAP created
       AUTO_SESSION_MANAGER descheduled
       Settings filled
       Service Data Control Manager tasks created
       Task processor scheduled
       Jobname                        /BDL/TASK_PROCESSOR
    Please try to fix the problem by deactivating the task processor (deleting any still open jobs called /BDL/TASK_PROCESSOR) and then reactivating SDCCN via Utilities -> Activate. If that doesn't help, please open the system and supply user & password so that I may look at the problem in the systems.
    If none of these fit you, please ensure that you have a maintenance certificate which should be installed via transaction slicense.  Has this already been done?  If not, please log a message for SAP on component SV-SMG-LIC and request for the maintenance certificate.
    Hope this helps.
    Thanks,
    Mark

  • SPAM/SAINT update error patch 23 - 640

    Hi:
    I´m recieving the following dump when updating SPAM/SAINT patch 23 under 640:
    Syntax error in program "SAPLOCS_UI "
    Error in ABAP application program.
    The current ABAP program "SAPLSPAM" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "SAPLOCS_UI ", the following syntax error occurred
    in the Include "LOCS_UIU15 " in line 1:
    "Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
    In program "SAPLOCS_UI ", the following syntax error occurred:
    "Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
    Thanks a lot,
    Armenta

    Hii read modification adjustments in this document u will get a clear idea.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
    Award points if useful

  • Support Package Manager: SPAM/SAINT Update

    Hi,
    I downloaded the SPAM/SAINT Update and executed it with SAPCAR in the directory of the  Application Server Folder. The original file KD74053.sar (6767 kb) is still in the folder, but a new file 'signature.smf' (5 kb) appeared.
    What is that one for?
    Next, I think that I should be able to take a next step with transaction SPAM (Support Package --> Load Packages --> From Application Server), but it's 'blanked out' and not accessible.
    What are the next steps and how do I really get the SPAM/SAINT update working, so I can proceed to my actual goal, the Support Package Update.
    Thanks!

    Hi,
    To reset DDIC password you could go with
    SQL> select bname from usr02 where mandt='000' and bname='SAP*'
    If the user SAP* exists then delete the user with below command
    SQL> delete from usr02 where mandt='000' and bname='SAP*'
    Run the below command to verify whether user deletion was successful.
    SQL> select bname from usr02 where mandt='000' and bname='SAP*'
    SQL> commit;
    After that  login to client 000 with SAP* and password as pass
    reset the password for user DDIC with SAP* user.
    Thanks,
    Gaurav

  • UPDATE SPAM/SAINT TRANSACTION (SAPKD70023)

    I am trying to Update SPAM/SAINT transaction in Client 000. The log reports finished with return code 4, but the transaction still runs and the message below is: DD IMPORT finished with retyurn code 4. But it  is working, yet.
    I am updating the SPAM/SAINT transaction in Solution Manager 4.0 and the kernel release is 7.00 with patch level 83.

    Import of the current OCS Queue (02.11.2007, 16:44:06)
    The import is continued in phase 'CHECK_REQUIREMENTS'
    Import phase 'PROLOGUE' (02.11.2007, 16:44:11)
    Import phase 'PROLOGUE' was successfully finished (02.11.2007, 16:44:12)
    Import phase 'CHECK_REQUIREMENTS' (02.11.2007, 16:44:12)
    Import phase 'CHECK_REQUIREMENTS' was successfully finished (02.11.2007, 16:44:13)
    Import phase 'DISASSEMBLE' (02.11.2007, 16:44:13)
    Import phase 'DISASSEMBLE' was successfully finished (02.11.2007, 16:44:17)
    Import phase 'ADD_TO_BUFFER' (02.11.2007, 16:44:17)
    Import phase 'ADD_TO_BUFFER' was successfully finished (02.11.2007, 16:44:18)
    Import phase 'MODIFY_BUFFER' (02.11.2007, 16:44:18)
    Import phase 'MODIFY_BUFFER' was successfully finished (02.11.2007, 16:44:18)
    Import phase 'TEST_IMPORT' (02.11.2007, 16:44:18)
    Import phase 'TEST_IMPORT' was successfully finished (02.11.2007, 16:44:23)
    Import phase 'IMPORT_OBJECT_LIST' (02.11.2007, 16:44:23)
    Import phase 'IMPORT_OBJECT_LIST' was successfully finished (02.11.2007, 16:44:28)
    Import phase 'OBJECTS_LOCKED_?' (02.11.2007, 16:44:28)
    Import phase 'OBJECTS_LOCKED_?' was successfully finished (02.11.2007, 16:44:28)
    Import phase 'SCHEDULE_RDDIMPDP' (02.11.2007, 16:44:28)
    Import phase 'SCHEDULE_RDDIMPDP' was successfully finished (02.11.2007, 16:44:28)
    Import phase 'IMPORT_PROPER' (02.11.2007, 16:44:28)
    The 'IMPORT_PROPER' phase started at 16:44:28 but at now it is still running, at status line stays - "DD Import finished with returncode 4" ...
    Can anybody helps to update SPAM/SAINT proper?

Maybe you are looking for

  • Where can I find a tutorial about...

    I'm new to Flash CS3 and need some help...please. Where can I find a tutorial on how to customize a scroll box? I made one, but the pictures that are going inside, they are not center, I can only see, the bottom part of them. Thanks

  • Text droppping out of SWF file

    I am having a new problem with files I work with all the time in Flash MX version 6.0. When I upload my swf file, some of the text drops out. You can see an example of this by going to http://www.ballyhoostories.com/ballyhoo/main.html?1 (click on the

  • Missing book from collections

    I have just made a large book of 440 photos and text and exported it to Blurb. It was sitting ing the collections box as are other books I have done.  There was a quality problem with the printing and Blurb are happy to redo it.  But the book has dis

  • Changes in PrPro Forum Structure

    Looks like we got a change in the Forum structure for PrPro (I've seen some changes in other forums too). So far, I have to say that I like it. Only concern would be for those users on CS 4 and Earlier, who might get lost a bit, and just post to the

  • Running youtube videos on Mozilla & Flash Player crashes?

    I have a mid 2010 macbook pro & am having a hard time playing videos on youtube. Somebody please help? I have the latest update for the flash player & have problems.