TRM Market Data: Saving data if tolerance check failed

Dear members,
In configuration of the Market Data Feed, in the translation table configuration, you set a value for a % of tolerance when retrieving market data. When you run the TBD4 program to fetch current market data, a check is performed on each data element to see if it falls withing the % you defined in customizing. If the data breeches the limit, a warning message is generated and the data is not saved permanently in the SAP tables.
I would like to know if there is a way to get the warning message, but still let the data be saved in the permanent tables?
Kind regards
Greg

Hi Lorenz,
The note you pointed out does not help my problem, but thank you.
Let me indicate that we are running ECC6.05 with Support level 6.
Greg

Similar Messages

OA Tutorial Create Page pt2 - Where is data saving?

Hello!
I am working through the framework tutorials in jDeveloper. I am running 9.0.3.12.25 with OA 11i. I am currently in Chapter 2: Core Lessons, on the Create - Part 2 tutorial. Everything seems to be working ok...I can create an Employee and search for them and view them in the LOVs and the results. Here is my question - where should this data be saving? My EmployeeEO shows AK.FWK_TBX_EMPLOYEES for Schema Object. My EmployeeFullVO is based on a query that is pulling from AK.FWK_TBX_EMPLOYEES. However when I query this table, I am not seeing any new employees being created - just the original 7 that were seeded. Does anyone have any suggestions as to where else I should be looking?
Again - I am not getting any errors when I create the new employee. I can then return to my Search page and query up the Employee that I just created, as well as employees that I created yesterday. The only other odd behavior that I am seeing is that the Full Name is not being displayed, but all other fields are. Also, I am extremely new to the OAF, so please bear with me :)
Thanks!
Janel
Edited by: user468440 on Nov 17, 2009 11:16 AM
My apologies, I didn't notice until after I posted that this was under the incorrect user.
OA Tutorial Create Page pt2 - Where is data saving?

Hi
Please check with the DBC file ,and the database u connected to ,verify that u are quering the database from backend and entry in dbc file is same .
thanx
Pratap

Problem in DATE saving: all years are in the 21th century !!

Hi for all,
I'm using a lot of date items in my application and I have a problem caused by data format: in form fields, I enter dates in 'DD/MM/YY' format. So I had always a systemic concatenation of '20' to the year 'YY' always this :
dispalyed data | saved data
DD/MM/YY | DD/MM/20YY
But I want (manipulating dates of birth) that 85 --> 1985, 79 --> 1979 ... 01 --> 2001, 05 --> 2005
So how can I resolve this.
Thank you for your assistance.
Joe

Joe,
Use RR instead of YY.
SUNDARK

Where will be the IDOC data saved when the receiving system is not ready

where will be the idoc data saved data when the receiving system is not ready

Hi karthik,
If the receiving system is not ready ,
the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
regards,
Prasad kodi.

Saving Data from ALV.

hi all.
I have an issue regarding saving data from alv to data base table.
The problem is like this. I have an internal table consist of 10 column from three diferent tables.one primary key is there.
now i have displayed it in alv grid. there is a column of quantity. i made some changes in quantity of some rows. now i want to save it into the database table from which that quantity field fetched.
i used first check_changed_data method. if the flag is set it means data is changed.
wat shud i do to save that quantity column into data base.
Thanks In advance.
varu

Hi,
To modify database or ztable from the ALV grid,you need to do the following:
---You have to modify the field Catalog fields (fields that you want to make editable).Set the field EDIT as 'X'.For example if you want to make the field below editable:
ls_fcat-fieldname = 'CARRID'.
ls_fcat-edit = 'X'.
APPEND ls_fcat TO pt_fieldcat.
---Call the method below before you call the set_table_for_first_display.
CALL METHOD ALV_GRID_INSTANCE->set_ready_for_input
EXPORTING
i_ready_for_input = 0. ( For Display ) and ('1' for Edit )
After this put the set_table_for_first_display.
Now if the ALV data has changed,and you want to change the database or ztable,then in your pf status give a function code for SAVE button in the GUI.
In the PAI of the screen,in user command module write the following:
WHEN 'SAVE'.
call method gr_alvgrid->check_changed_data
importing e_valid = l_valid.
if l_valid = 'X'.
MODIFY spfli FROM TABLE itab_spfli.
endif.
(l_valid is a flag.
DATA:l_valid type c.
If you want to check if the user has entered any value on the grid, use the Method : CALL METHOD gr_alvgrid->check_changed_data.
This method returns a flag l_valid which can be checked to see if the data on the ALV grid has been changed or not.)
Regards,
Beejal
**Reward if this helps

Report generation is saving data to a word template

I created a template for a program to write test result data when prompted by the user. My problem is that after the template is written to and closed it's asks if the new data shoule be saved. I don't want to give the user that option because it actually saves it to the template not a document, and when another test is done and report is requested, it doesn't write over the data fromt the previous results, it adds to it. Is there some sort of Word security option or a vi that might be helper to prevent users from saving data permanently, to overwrite previous data?

Harene,
The ActiveX call to Quit comes with a parameter to Save Changes (T or F). I would suggest making that the last call you make. This is how the Dispose Report.vi is made in the Report Generation Toolkit for Microsoft Office. (This was checked on my machine with Office 2000.)
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Error (ORA-01403) saveing data form a report with apex_item items

Hi all,
I've a problem saveing data that's inserted into a report which I created using apex_item items. Reproducing the exact issue on apex.oracle.com will take me a lot of time, and I don't know if I really can reproduce this matter... So I hope I can explain my problem clearly enough, here...
The global story of the application is that its an application used for measureing objects. For these objects there are templates, with default properties. When measureing an object, the user must fill in those properties for the object. The report is build dynamicly, becouse each object has different properties and each property could be of an other kind (number, text, list, counter [=number field with add and substract buttons], and date). Depending on the type of the property, the report has to show an other item to fill.
The query for constructing this report is like this:
select defprop.proptyp_id,
apex_item.hidden(41,defprop.id) defprop_id,
defprop.nam,
decode(proptyp.id,
 1, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'' ,p_attributes=>'class=case5_num'),
 2, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||''),
 3, apex_item.select_list_from_query(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'', p_query=> 'select wrd, id from property_typewrd where proptyp_id = ' || proptyp.id ||' order by vlgnum', p_show_null=> 'NO'),
 4, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'',p_attributes=>'class=case5_num')
 || '<a name="add_f02" href="#"><img alt="add" src="#WORKSPACE_IMAGES#plusBig.gif"/></a> '
 || '<a name="sub_f02" href="#"><img alt="sub" src="#WORKSPACE_IMAGES#minusBig.gif"/></a>',
 5, apex_item.date_popup(p_idx=>42, p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||''),
 oms
 ) waarde
from default_property defprop,
object_instance obj,
property_type proptyp
where defprop.stdobjver_id = obj.stdobjver_id
and defprop.proptyp_id = proptyp.id
and obj.id = :P2200_ID_INVThis report works fine. Depending on the type of the property it shows a numberic field, text field, selectlist (with right values), counter field or date field.
If the default property is set to a 'CONSTANT' value, the last known value is filled in.
With a javascript I check the numberic field value and achieve the counterfield to add or substract values when 'plus' or 'minus' is clicked.
This javascript is placed in the field 'Execute when Page Loads' in the page properties in APEX. Here is the code:
/*Execute when page loads*/
/*Allow only numbers */
number_elem = $('input[name=f42].case5_num');
number_elem.keypress(function(event) {
if (event.which && (event.which < 46 || event.which > 57 || event.which == 47) && event.keyCode != 8) {
 event.preventDefault();
if (event.which == 46 && $(this).val().indexOf('.') != -1) {
 event.preventDefault();
//for mouse events, remove any non numeric characters
number_elem.bind('mouseup mousedown mouseleave', function(event) {
 this.value = this.value.replace(/[^0-9]/g, '');
/* Subtract Button */
$('a[name="sub_f42"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
 elemVal = 0;
else {
 elemVal = Number(currVal);
if (elemVal > 0)
 number_elem.val(elemVal-1);
else
{ elemVal = 0; }
/* Add Button */
$('a[name="add_f02"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
 elemVal = 0;
else {
 elemVal = Number(currVal);
number_elem.val(elemVal+1);
});Those two codes makes my report works fine. So far I'm happy. But now I want the data, which the user fills in the items, to be saved.
So I created a process that should do this for me (it wil run after the user hits a button), here is the code:
declare
 v_objmet_id number := 0;
begin
 select measurment_seq.nextval
 into v_objmet_id
 from dual;
 insert into measurment
 ( id
 , obj_id
 , dat
 values
 ( v_objmet_id
 , :P2200_ID_INV
 , :P2200_METDAT_INV
 /*Loop trough the values (g_f42 holds the value of the property)*/
 for i in 1 .. apex_application.g_f42.count loop
 /*g_f41 holds the key to the default property*/
 if apex_application.g_f41(i) is not null and
 apex_application.g_f41(i) > 0 then
 insert into measurment_prop
 ( measrument_id
 , defprop_id
 , wrd)
 values
 ( v_objmet_id
 , apex_application.g_f41(i)
 , apex_application.g_f42(i)
 end if;
 end loop;
end;After running this process, the application branches back to the page, clearing the cache and set some items I use for filtering an other report with their own values.
Both the process and the branche have a 'when button pressed' condition, where the same button is filled in. The branche fires on submit: after processing.
When I hit the button to save the data, I get an error: ORA-01403: no data found
In the debug info I can find there is encountered an unhandeled exception in the process, but I don't know what's going wrong...
I thought it could be something with the date field, I want to save, so I put it in a to_date() with the right format, but I still got the error...
I've also checked if the query which fetches the nextval of the sequence is correct, and it is, no typeing error in the sequence name, or something.
I'm using APEX 4.0.2
Edited by: Mir on 28-jun-2011 10:25
Changed some code of the javascript, it directed to the wrong item ID, now its correct

My problem is solved. The error occured when application item g_f41 was accessed, so my application couldn't find the data, the user putted in there. I now pasted this part of the sql, to the other apex_item field, so it became one field and now it works correctly:
select [...]
apex_item.hidden(41,defprop.id) ||
decode(proptyp.id,
 1, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
[... etc ...]

Customizing tables not asking for Customizing Request while saving data

Hi,
I have some customizing tables in my development server (Delivery Class = 'C').
These always used to ask for a Customizing Request whenever data was saved in them.
Suddenly, I have noticed they are no more asking for any Customizing Request. I cross-checked in the Transport Organizer and confirmed that there are no customizing requests of mine which may be already holding any data entries of these tables.
I wonder why this may be happening (believe it to be some basis configuration issue. also asked my basis guy but he has no clue).
Kindly suggest.
Thanks,
Z

Thanks Navneet and Gautham.
My problem is now solved. Let me summarize the problem and the solution now.
-> The customization tables suddenly stopped asking for a request while saving data.
Somehow the settings had been reset, and as Gautham pointed out, it was corrected in the tcode SCC4
-> Most of the tables now worked fine, but still few of them didnt ask for requests
Here, I found out that the developers had chosen "no, or user, recording routine" instead of "standard recording routine". For such tables, when i check in the tcode SE54, menu path Environment -> Maintenance Objects -> Change, I find the Transport category 'No Transport'. Regenerating the maintenance generator choosing "standard recording routine" fixes this and the tables now ask for a customizing request.
Thanks, both, for the quick response.

Saving data in database using textbox and save button

Hello. I just want a help about my code because when i close the application the data that i add is not been saved.
Here is my code of save:
function saveData(event:MouseEvent):void
status.text = "Saving data";
insertStmt = new SQLStatement();
insertStmt.sqlConnection = conn;
var sql:String = "INSERT INTO employees (firstName, lastName, salary) VALUES (:param, :param1, :param2)";
insertStmt.text = sql;
insertStmt.parameters[":param"] = firstName.text;
insertStmt.parameters[":param1"] = lastName.text;
insertStmt.parameters[":param2"] = salary.text;
insertStmt.addEventListener(SQLEvent.RESULT, insertResult);
insertStmt.addEventListener(SQLErrorEvent.ERROR, insertError);
insertStmt.execute();
Here is the full code:
import fl.data.DataProvider;
import flash.data.SQLResult;
import flash.data.SQLConnection;
import flash.filesystem.File;
import flash.data.SQLStatement;
import flash.data.SQLConnection;
var conn:SQLConnection;
var createStmt:SQLStatement;
var insertStmt:SQLStatement;
var insertStmt2:SQLStatement;
var insertStmt3:SQLStatement;
var selectStmt:SQLStatement;
var insert1Complete:Boolean = false;
var insert2Complete:Boolean = false;
saveBtn.addEventListener(MouseEvent.CLICK, saveData);
loadBtn.addEventListener(MouseEvent.CLICK, getData);
init();
function init():void
conn = new SQLConnection();
conn.addEventListener(SQLEvent.OPEN, openSuccess);
conn.addEventListener(SQLErrorEvent.ERROR, openFailure);
status.text = "Creating and opening database";
// Use these two lines for an on-disk database
// but be aware that the second time you run the app you'll get errors from
// creating duplicate records.
// var dbFile:File = File.applicationStorageDirectory.resolvePath("DBSample.db");
// conn.openAsync(dbFile);
// Use this line for an in-memory database
conn.openAsync(null);
function openSuccess(event:SQLEvent):void
conn.removeEventListener(SQLEvent.OPEN, openSuccess);
conn.removeEventListener(SQLErrorEvent.ERROR, openFailure);
createTable();
function openFailure(event:SQLErrorEvent):void
conn.removeEventListener(SQLEvent.OPEN, openSuccess);
conn.removeEventListener(SQLErrorEvent.ERROR, openFailure);
status.text = "Error opening database";
trace("event.error.message:", event.error.message);
trace("event.error.details:", event.error.details);
function createTable():void
status.text = "Creating table";
createStmt = new SQLStatement();
createStmt.sqlConnection = conn;
var sql:String = "";
sql += "CREATE TABLE IF NOT EXISTS employees (";
sql += " empId INTEGER PRIMARY KEY AUTOINCREMENT,";
sql += " firstName TEXT,";
sql += " lastName TEXT,";
sql += " salary NUMERIC CHECK (salary >= 0) DEFAULT 0";
sql += ")";
createStmt.text = sql;
createStmt.addEventListener(SQLEvent.RESULT, createResult);
createStmt.addEventListener(SQLErrorEvent.ERROR, createError);
createStmt.execute();
function createResult(event:SQLEvent):void
createStmt.removeEventListener(SQLEvent.RESULT, createResult);
createStmt.removeEventListener(SQLErrorEvent.ERROR, createError);
addData();
function createError(event:SQLErrorEvent):void
status.text = "Error creating table";
createStmt.removeEventListener(SQLEvent.RESULT, createResult);
createStmt.removeEventListener(SQLErrorEvent.ERROR, createError);
trace("CREATE TABLE error:", event.error);
trace("event.error.message:", event.error.message);
trace("event.error.details:", event.error.details);
function addData():void
status.text = "Adding data to table";
insertStmt = new SQLStatement();
insertStmt.sqlConnection = conn;
var sql:String = "";
sql += "INSERT INTO employees (firstName, lastName, salary) ";
sql += "VALUES ('Bob', 'Smith', 8000)";
insertStmt.text = sql;
insertStmt.addEventListener(SQLEvent.RESULT, insertResult);
insertStmt.addEventListener(SQLErrorEvent.ERROR, insertError);
insertStmt.execute();
insertStmt2 = new SQLStatement();
insertStmt2.sqlConnection = conn;
var sql2:String = "";
sql2 += "INSERT INTO employees (firstName, lastName, salary) ";
sql2 += "VALUES ('John', 'Jones', 8200)";
insertStmt2.text = sql2;
insertStmt2.addEventListener(SQLEvent.RESULT, insertResult);
insertStmt2.addEventListener(SQLErrorEvent.ERROR, insertError);
insertStmt2.execute();
function insertResult(event:SQLEvent):void
var stmt:SQLStatement = event.target as SQLStatement;
stmt.removeEventListener(SQLEvent.RESULT, insertResult);
stmt.removeEventListener(SQLErrorEvent.ERROR, insertError);
if (stmt == insertStmt)
insert1Complete = true;
else
insert2Complete = true;
if (insert1Complete && insert2Complete)
status.text = "Ready to load data";
function insertError(event:SQLErrorEvent):void
status.text = "Error inserting data";
insertStmt.removeEventListener(SQLEvent.RESULT, insertResult);
insertStmt.removeEventListener(SQLErrorEvent.ERROR, insertError);
trace("INSERT error:", event.error);
trace("event.error.message:", event.error.message);
trace("event.error.details:", event.error.details);
function getData(event:MouseEvent):void
status.text = "Loading data";
selectStmt = new SQLStatement();
selectStmt.sqlConnection = conn;
var sql:String = "SELECT empId, firstName, lastName, salary FROM employees";
selectStmt.text = sql;
selectStmt.addEventListener(SQLEvent.RESULT, selectResult);
selectStmt.addEventListener(SQLErrorEvent.ERROR, selectError);
selectStmt.execute();
function saveData(event:MouseEvent):void
status.text = "Saving data";
insertStmt = new SQLStatement();
insertStmt.sqlConnection = conn;
var sql:String = "INSERT INTO employees (firstName, lastName, salary) VALUES (:param, :param1, :param2)";
insertStmt.text = sql;
insertStmt.parameters[":param"] = firstName.text;
insertStmt.parameters[":param1"] = lastName.text;
insertStmt.parameters[":param2"] = salary.text;
insertStmt.addEventListener(SQLEvent.RESULT, insertResult);
insertStmt.addEventListener(SQLErrorEvent.ERROR, insertError);
insertStmt.execute();
function selectResult(event:SQLEvent):void
status.text = "Data loaded";
selectStmt.removeEventListener(SQLEvent.RESULT, selectResult);
selectStmt.removeEventListener(SQLErrorEvent.ERROR, selectError);
var result:SQLResult = selectStmt.getResult();
resultsGrid.dataProvider = new DataProvider(result.data);
// var numRows:int = result.data.length;
// for (var i:int = 0; i < numRows; i++)
// var output:String = "";
// for (var prop:String in result.data[i])
// output += prop + ": " + result.data[i][prop] + "; ";
// trace("row[" + i.toString() + "]\t", output);
function selectError(event:SQLErrorEvent):void
status.text = "Error loading data";
selectStmt.removeEventListener(SQLEvent.RESULT, selectResult);
selectStmt.removeEventListener(SQLErrorEvent.ERROR, selectError);
trace("SELECT error:", event.error);
trace("event.error.message:", event.error.message);
trace("event.error.details:", event.error.details);

Your database system may well have a setting for character encoding when creating new databases. If you set that to unicode JDBC should store and retrieve UNICODE strings automatically.
As to the HTML side, you should generally use UTF-8 encoding. You need an editor which understands UTF-8. JSPs and servlets have ways of specifying the encoding which goes into the http headers. For static HTML pages you may have to add a header like:
<META http-equiv="Content-type" value="text/HTML; charset=UTF-8">
When receiving form data you need to do
request.setCharacterEncoding("UTF-8");

Premiere Elements 12 crash, lost all saved data on a new project.

I was working on a short project that had many video and audio clips. About 3 hours into the project Premier Elements 12 crashed. Now It will not open the saved data. It simply tells me "An unknown error occurred while opening the project" Am I SOL? Is this what I should expect as a regular from Adobe? More importantly, is there a method to recover the project? I am a new user to Adobe Elements and video editing in general.
Thanks,
Jordan M-

I've attempted to update the software. When I open the program up and go to the Help tab and Check for Updates, it tells me that it is already up to date. I've noticed through screen shots that other users' icons say 12.1 Mine does not and I still have performance issues while trying to render or upload.
My computer runs high end games at max settings, so as far as I can tell, my computer works fine. I would like to understand these updates further before I continue to analyse the issues I am having.
Also,
I ran a Program Compatibility Test and it tells me:
Issues found:
Program Compatibility:
Incompatible Application (referring to Premiere Elements 12)
Publisher Details:
Make older programs run in this version of Windows,
Package Version 1.5
Publisher Windows.
Make older programs run in this version of Windows,
Package Version 1.0
Publisher Microsoft Corp."
Detection Details:
"Windows Version 6.1
Architecture x86"
I don't want to flood you with to many questions. My priority is to just update the darn thing to see if that is my issue. I thought I would mention the test above as additional info that might be helpful.
Thank you for your help thus far, It's been of great use.
Jordan-

Different ord.dep.start date in depreciation area 15.Check

Hi,
While saving an Asset Mastter record the system is throughing me a warning message as " Different ord.dep.start date in depreciation area 15.Check"
Message no. AA186
Diagnosis
The ordinary depreciation start date you entered is different to the ordinary depreciation start date 01.10.2008 determined by the system in depreciation area 1..
Can any one help me out how to resolve this issue.
Thanks
Sivanand

hi
check your depreciation area setting whether you have used another start date for calculation

No update time stamp in the saved data file

In NI Example Finder, there is a file called "Fieldpoint Datalogger.vi". I flip the "Time Format" switch to "HH:MMS" and the "File Type" switch to "Spreadsheet". The data saved into a file have time stamp at each line. However, the time stamp in each line of the data file saved as the same time without any update to the most current time. I put sampling frequency for 100 ms and saved as 50K bytes file size, but all the time stamps in the file show one same time (I believe it is the time to start to save into file and keep repeat it). How can I get the update time stamp for every 100ms or 500ms and save that time stamp into the data file from this "Fieldpoint Datalogger.vi"? Should I change anything on the subVI called
"embedded FPLog.vi"?

Hello,
Fieldpoint systems usually base the timestamp on the National Instruments Time Server, which is installed on any computer using the Fieldpoint driver. This means that you can configure the Time Server on a Fieldpoint system to continuously check the system time of any computer on the network that has the Fieldpoint Driver installed by referencing its IP address.
If the timestamp is not updating, then we should first verify that it has been configured properly.
Take a look at the following Knowledge Base and let us know if using the listed steps takes care of this issue.
http://digital.ni.com/public.nsf/websearch/C4E56AD6450FC5FD86256DFF0007FF01?OpenDocument
Best regards,
Justin Tipton
National Instruments

Different values beetween front page and saved data

Hello,
I have problems to saved data correctly. I acquire data with Labview 6.0 and a counter/timer card. These data appear on my front page. But when I save them in a table file, their format is modified, rounded.
For exemple: on my front page values are 20.675 , 21.012 and in my saved file these values are 20.750 and 21.000, even if I checked all the numbers format in the diagram, and declare them in extended precision.
Where is my mistake ?
Thank you for your help

Hello shadok,
that's strange :-)
Try this simple example. If this works, then something with your data is wrong...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Test_Save.vi ‏12 KB

Adobe Forms - Table control data Saved in Database table through Web Dynpro

Hello Friends,
I Am facing a Problem in Adobe Forms through Web Dynpro.
i Want to Make Interactive online Adobe Forms - In Table Control user enter the multiple entry in the table control and after that Click on SAVE button , entry will saved in Database table.
Please guide me.
Thanks in advance.
Gaurav.

Hi Gaurabh,
For interactive form you have to check the property DisplayType = native and PdfSource should be a Context Attribute of type 'Xstring'.
For data retrieval, create a NODE and have all the required attributes within that node of AOBE form.
Fetch the data in WDDOINIT.
Also check, that the offline senario for this form is working.
Hope it helps you.

About Business Partner Marketing, Sales Area Data tables

Hi,
I want the table names where Business Partner sales area data and Marketing Attributes are stored.
Thanks in advance.
Regards,
Dhanraj.

Hi Natarajan,
Thanks for your help.
But There is no data inside this CRM_MKTPL_ATTR table.
I want the Sales Organisation,Distribution Channel, Division data and Marketing Attributes of Every Business Partner.
I found table CRMM_BUT_FRG0080 contains data, but when I created a new Business Partner and maintain the Sales Area Data, the saved data does not reflect in the CRMM_BUT_FRG0080 table.
Regards,
Dhanraj.

TRM Market Data: Saving data if tolerance check failed

Similar Messages

Maybe you are looking for