Trophy:Back button activation area not as wide?

i dont know if its supposed to be designed this way but with my back button i have to push the screen/button about 1mm from the left side of that arrow. but with the search button i can push/activate from the area about 3mm on the right of the image. testing it from the sides of the screen it seems like the search button has a wider activation area. is yours like that too?

today i tried the phones in two of my local vzw stores and the area you have to press is similar to my phone. the area you need to push the back button is farther from the left compared to the right with the search button. i wont be able to get a replacement for my current trophy yet. (gotta call #611 later)(for that high pitch tone when the screen is on (i got a post about my issue in the forums))

Similar Messages

Getting error message in debug "Page contains page items/buttons which are not assigned to a region!"

Hi,
I created a form and when I submit, it goes through but there is no "success" or "failure" message on Apex. I tried debugging it and got this message:
"Page contains page items/buttons which are not assigned to a region!"
I looked at the page definition and it seems like everything is assigned to a region. Much appreciate your help.
Thanks!

For your message, the relevant branch needs "include process success message" to be checked - and a value in success/failure in your process.
Check the submitting & landing page for items not in a region. Under the items section there may be items listed separate to those under specific regions.
It's possible these are related, but not guaranteed.

Why isn't my back button in Safari not working? I am constantly resetting Safari.

Why isn't my back button in Safari not working? I am constantly resetting Safari.

Cheryl...
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db (or ApplicationCache.db) file from the com.apple. Safari folder to the Trash.
Restart your Mac. Launch Safari. Try the back button.
~ (Tilde) character represents the Home folder.

HT201272 The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on either my iphone or ipad. I have tried the previous suggestions. Can you offer further advice.

The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on my iPhone 4 or my iPad2. I have tried previous suggestions on the support page. Can anyone suggest further solutions?

Hello BwarsIG88
Check your purchase history by going to the iTunes Store and then click on purchases. From there you can see all your purchase history and download what you are missing.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
-Norm G.

Button Images are not shown

Dear All,
In one of our test instance, some button images are not shown, whereas some are.
They are shown as grey button.
I searched metalink, according to them patch 1238573 should be installed, which is already installed.
What could be the reason?
Also, is there any way to find out which images are missing?
Regards,
Ashish Shah

Hi
I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
That should do the trick!
Regards
Tim

I have a replacement iPhone 5 and I can't get any of my ring tones back. They are not in the cloud or in the back up or in iTunes. Where do I go to re download them?

I have a replacement iPhone 5 and I can't get any of my ring tones back. They are not in the cloud or in the back up or in iTunes. Where do I go to re download them?

You only get one download.
As always, it is your responsibility to back up your content.
Did you fail to transfer your purchases to your computer?

Satellite M70: Control button keys are not working

I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
Thanks
Emm

Hey Folks
Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.

Webpages are not as wide as my 17" monitor. There is space on both sides. Explorer does not do this. Zooming in does not help. Is there a fix?

I installed firefox as I heard it is better than exployer. The problem is that the webpages are not as wide as my screen. They reach from top to bottom, but not to each side. I look at the same pages on exployer and they are "full screen". The zoom only makes the fonts larger. It does not make it fit the screen. I hope there is a fix.
This is windows 7.

Thanks for all the help. I downloaded the extension from the second post. It seems to have fixed my problem. Some pages still load in the "narrow" format, but I can zoom them out and they fill the whole page. Firefox seems to remember the zoomed version the next time that I load the page. Happy for now.
Thanks again.

Button active area does not match Photoshop layer size

I have created several text-only buttons for a menu using Photoshop. When I reveal the active area in Encore, usually the bounding box for the active area is correct and goes right around the text, but for several of the buttons, the bounding box is way wider than the text. There is a simple graphical highlight that is also part of each layer group, but the bounding box is way larger than where that appears. There is nothing in any layer in the button group that accounts for the extreme width of the bounding box for the button in Encore. Any ideas?
I have deleted the offending button groups and copied one that didn't have the problem, only to have the same extra-large bounding-box appear. Quite strange.

All right, I finally got around to looking at this again, and, as expected (by me, even) there was a stray pixel or something in the highlight layer. I did a ⌘-T to get a transform bounding box in PS, and saw that for the highlight layer, it went way off to the left. Weird. So I then highlighted the area where I thought it might be and applied a Hue/Saturation to see if I could bring it out a little, since I couldn't see it. I tried raising and lower the brightness with a transparent background, a white background, and a black background. I couldn't see it on any background, even zoomed in to 800%. I still don't know what it was, but I just drew a marquee around the highlight that I wanted, inverted the selection and deleted, and now the bounding box for the button is as it should be in Encore.
The extra weird thing is that this seemed to happen on random buttons in my design. In PS, I would create a new button group by duplicating the one above it, then move it straight down below the previous button. I replaced the text and then moved the highlight a bit to the left or the right to be in the correct spot in relation to the new bit of text. And that duplicted layer group which had the correct bounding box with no extraneous bits in the highlight layer would then all of a sudden have the incorrect bounding box and apparently some little bit that PS could see, though I couldn't. Strange.
So, still a bit mysterious, but thanks for your help and ideas.

Firefox doens't show a web address anymore and I can't use the back button (it's not click-able)

The back and forward buttons, the refresh and stop loading buttons are not available for me to click. I can see them, but they are completely gray and I can't click on them. Also, firefox doesn't have a web address in the box anymore. It is always blank, even after I type in a website and it goes there.
== This happened ==
Every time Firefox opened

Try http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Close, new, back, forward icons are not shown

Close, new, back, forward icons in firefox are not shown, so it makes difficult to use firefox. I am using latest firefox in ubuntu 11.04.
Already asked here but no response :( superuser.com/questions/559381/in-firefox-back-tab-close-new-tab-icon-is-not-shown I have posted screenshot there, It will be helpful so posting the link here.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Active area not lined up with link

Hi,
At jeffreykorst.com, there are links to a photography section and a magic section. In Safari (2.04) the active area of the link is below the text. In Firefox (3.01) it lines up correctly.
Any ideas?
Thanks very much,
Jeffrey

Safari uses a JavaScript to create a canvas. That's the area you see in Safari and not in Firefox because Firefox does not support that JavaScript.
It's the outline around your name in the second image that's blocking the link. Did you move that area to the back.
Here's a sample page to replicate the problem:
http://www.wyodor.net/Overloop/JK.html
The caption says it all.
In Safari the Photography link does not work. In Firefox it does.
But when both textboxes are moved to the front they work. And while in iWeb, hovering the mouse over the link you'll see the color change.
Also note the difference between hyperlinking the TEXT and hyperlinking the TEXTBOX. MSIE does not respond to hyperlinked TEXTBOXES.
Isn't iWeb supposed to look the same as in a browswer?
It should. But in iWeb you also see the layout and all that stuff. In the end it's in the browser where everything is displayed. With all the anomalies you now encounter.
Never trust what you see.

Time entries booked against network & activity are not transferring to PS

Hi every one,
We have scheduled a job to transfer time entries which were booked against network & activity on daily basis, but for some reason the time entries are not getting posted against the network (Only for certain network, see attachment), though it is not showing any error message when i saw the spool log for the job in SM37. When i ran CAT5 in test mode it is showing time entries which needs to be booked against the network and activity.
Can some one help me out to transfer the time entries via the job??
I have attached the screenshot from CAT5 transaction.

Hi Ram,
Variant will determine the selection of personnel numbers and other parameter defined on CAT5 selection screen. If manually posting is happening on network then it means network are fine.
What I can suggest is, you can create a new variant and then run it thought SM36 and check in SM37.
Go in CAT5 transaction, and untick test run, log and dates transfer can be ticked. Then save. Then variant attributes screen will open save the variant with a name and description .lets assume you saved the variant with name TEST. If you wish you can on save the variant on certain number of network or personnel number, it depends on you to keep it blank or run variant for limited number of records.
Now go in SM36 and click on STEP, in the ABAP program TAB enter "RCATSTPS", then select the variant using search help and you will find the variant defined above i.e. TEST.Check and save from bottom of the window. Come back once. Then click on START CONDITION, Date/Time - define a date and time for the variant "TEST" to run as a JOB.
Check in SM37 you will find the schedule JOB run time and date. After the JOB is finished you check report CJI3 for actual posting of network.
This will work fine, if in case you need few more fields to be defined in variant then I will suggest to create a variant via CATA instead of CAT5, their you will get more options to post time.
Regards,
Sandeep

Button Actions are not working -invoking task flow from other project regio

Hi
I have a project using a mani.jspx file having a regions and the region is updated with different views based on a router condition in my bounded task flow. Everything working fine with in the project. I have a seperate project in my application having an index.jspx and region in it. I created the ADF lib jar file of the first project and imported to this project. I could invoke the task flow in the first project to the region in the index.jspx file in the seconed project.But none of the action managed bean method attached to the buttons in this view are working.The methods are not getting called on clicking on button and no error in the backend console of Integrated weblogic server.Any body can help what could be the issue ?
Thanks
Suneesh

The issue that is happening when I refreshed the region with task flow from the project I imported.If I load the taskflow from the imported project on first time rendering all my managed bean actions are executing but if I load a different flow initially and change the taskflow Id imported from other project none of the managed actions are working.
Thanks
Suneesh

Deleted some contacts...can I get them back if they are not in my backups?

I used an app that let's you delete a ton of contacts at once, I think it was called Cleanup.
Now when I conntected my phone to my computer after deleting a few thousand contacts outlook synced my computer's contacts with my iPhone (not sure if this is regular) and so all of my contacts that got deleted from my phone also got deleted from my computer and now I'm missing contact info from about 3,000 of my clients.
I downloaded a backup recovery program but only 2 backups showed up and both contained the address book I currently have. Is there any other way I can get my contacts back?

According to this document: http://support.apple.com/kb/ht1766 Contacts are not included in the backup. Only the settings for Mail, Contacts, Calendars accounts. It's not worded very well, but that's what it means. The information regarding the accounts are synced to is backed up, not the contacts themselves. Contacts are intended to be synced with an address book or cloud service. There is only enough contact information in the backup to maintain the "Phone Favorites" list. (the emphasis below is mine).
Backed-up information includes purchased music, TV shows, apps, and books*; photos and video in the Camera Roll; device settings (for example, Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts); app data; Home screen and app organization; Messages (iMessage, SMS, and MMS), ringtones, and more. Media files synced from your computer aren’t backed up, but can be restored by syncing with iTunes.

Trophy:Back button activation area not as wide?

Similar Messages

Maybe you are looking for