Trophy data connection lost after international travel on GSM

There is a discussion going on at Windows Phone Central regarding the loss of data or 3G connectivity on the Trophy after returning from international travel where the Trophy is used with a SIM card on a GSM network. http://forums.wpcentral.com/trophy/182373.htm
It seems that this is a different flavor of the issue people have had using the HTC Connection app. In any event, the only remedy is to factory reset the phone when you get back from overseas, or, using Zune, revert to a backup, which means pre-Mango, then update to Mango again.
If anyone else is having this issue please make noise to Verizon and HTC so they get on it and solve it. Yes, the Trophy works overseas, but you should not have to factory reset your phone every time you get back.

Ditto. Just spent 10 days inTurkey & Germany. Trophy data & voice worked flawlessly overseas on GSM. Returned to US, no 3G data. Spent 2 hrs. with tech support and six different technical types, each supposedly having “deeper access” into Verizon’s systems, all to no avail. Each tech seemed to be working off the same flow chart because we went through the same series of useless questions with no resolution to the issue.  
Ultimate solution – hard factory reset. This either needs to be a Trophy or Mango issue as wife’s iPhone 4S had no issues either abroad or upon return.
How can you advertise the Trophy as a “global” phone when you need to do a hard reset every time you come back to the States? Undocumented “feature”??? Come on Verizon, either fix it or give us phones that work!  

Similar Messages

  • Iphone 4s network connection probs after international travel

    I traveled to the Bahamas last week. Since my return, I have been unable to connect to the server..I could only receive phone calls. I reset network settings and now it only displays "searching"...I can do nothing now. Any suggestions?

    Ditto. Just spent 10 days inTurkey & Germany. Trophy data & voice worked flawlessly overseas on GSM. Returned to US, no 3G data. Spent 2 hrs. with tech support and six different technical types, each supposedly having “deeper access” into Verizon’s systems, all to no avail. Each tech seemed to be working off the same flow chart because we went through the same series of useless questions with no resolution to the issue.  
    Ultimate solution – hard factory reset. This either needs to be a Trophy or Mango issue as wife’s iPhone 4S had no issues either abroad or upon return.
    How can you advertise the Trophy as a “global” phone when you need to do a hard reset every time you come back to the States? Undocumented “feature”??? Come on Verizon, either fix it or give us phones that work!  

  • Aperture 3: GPS data gets lost after 'Update from Master'

    My library contains photos in JPEG format that I geotag in Places, then I save the metadata with 'Write IPTC Metadata to Master'. The problem I have is, that the GPS data gets lost after I do an 'Update from Master', even if I saved the metadata before. I'm having this problem with referenced and managed photos and all my JPEGs from several different cameras. The only way to permanently store the GPS info into my photos seems to be to export the geotagged photos as versions.
    Does anybody has the same problem or knows how to solve this?
    Thanks in advance,
    Michael

    Use Houdah geo (http://www.houdah.com) to write location data back to the EXIF. It's interface is very similar to Places (Google maps and pins) and you can interface with the Aperture library. It's a bit of a pain, but if you need it done now rather than wait for an Aperture 3 fix, then...
    Also, see here: http://www.nickrains.com/index.php?option=com_content&view=article&id=65:apertur e-3&catid=12:news&Itemid=24

  • Cellular data settings lost after updating iphone 4. How do I return these settings?

    Hello All,
    I bought my iPhone 4 from the Apple Store in the UK, the phone was bought "SIM FREE" and hence it is unlocked.
    When I used to go to the phone settings, I had the option to change the network settings for my Internet Connection, MMS settings and others.
    After updating my iPhone 4 using iTunes, I lost these settings and now I cant configure my cellular data connection.
    Does anyone know how to reactivate the settings for the Cellular Data Settings?
    Thanks in advance,
    Raed

    You will need to contact the carrier. All supported carrier settings are in the iPhone's database and are applied automatically when a SIM card is installed from a recognized carrier.

  • WSDL data connection error after Form Server xdp render

    Hi
    I have a wsdl data connection inside an xdp after I render the xdp as pdf and reader extend the form when I click on the button to execute the web service method a pop up box appears saying the data connection has no properties. I am using LiveCycle Forms and Reader Extensions 8.1.
    Thanks

    Hi Paul
    Thanks for the reply.
    Reader extensions wasn't the problem, it was how I was manipulating the xdp before rendering.
    Thanks

  • Connection lost after compilatio​n

    Hi, i am currently using a myrio accelerometer board. I was running my code,  but suddenly, an error pops up telling me my myrio connection is lost. I have checked everything, the usb and the power connection, everything is secured, and this error only came up after i edited my code, so i am thinking if there are anything in my code that causes this error. I have attached the vi and the error snapshot.
    Attachments:
    Main2.vi ‏134 KB
    error.PNG ‏54 KB

    if you mean that after running your vi when stoped in and begin to edit vi , the connection is lost. it is obvious as you run the vi your PC get connected with rio , when you stop your vi  the connection established between your PC and rio is broken ans msg of connection lost pop up.

  • Bluetooth Connection lost after a few seconds - EV...

    Hey,
    I have an new Nokua Lumia 920. I want to connect my Lumia via Bluetooth to my laptop and in the university I treif to connect it to another laptop, as well as to my old XDA Touch Diamon!
    The problem: I can find all bluetooth devices and can also connect to them, BUT every connection is lost after about 5 seconds. This cannot be! Here are my firmware versions - are there issues?
    OS-version: 8.0.10211.204
    firmware-revision-version: 1232.5957.1308.0007
    hardware-revision-version: 1.0.0.0
    radio-software-version: 1.0.202093.3
    chip-SOC-Version: 8960
    I am located in germany. Anyone has a hint or solution - phone nearly useless to me without bluetooth.
    Best regards

    You do not have to be bluetooth connected to transfer files to and from the phone.
    Initiate the trandfer and it will happen. If they have been paired before, no passcode will be required.
    Theey won't keep a BT connection because none of the profiles the phone has requires one.

  • JCoRfcProvider: connection lost after a while

    I have created a couple of EJBs and propagated them using JCoRfcProvider to an ABAP system, so that the backend can reach them. But after a while the backend looses the connection to the JCO server process: "program XXX not registered". After a restart of the RFC destination using Visual Admin everything is fine again. It seems that the connection between the systems is closed when it is idle for some time.
    The <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/760e4248fc5133e10000000a155106/frameset.htm">documentation</a> says:
    If an RFC connection is interrupted or terminated, the JCo server automatically
    registers itself again on the same SAP gateway under the same program ID.
    Obviously, this automatic restart is not working, as the connection stays disabled once it has failed.
    Is there a parameter I missed? Is this a JCO bug? How can I get this thing stable?
    Best regards,
    Frank

    netsurferdude2 wrote:
    Hi all,
    Lets start off with some info. I have a XP machine with a WRT310N router but the connection to the router from my computer is wired. I have other computers on the network(a wired XP work comp and a wireless vista laptop). I do have linksys Easylink Adviser but it is was to laggy and doesnt work half the time so I dont use it. My antivirus software is Panda Internet Security 2008.
    My problem has only occurred twice but it has prevented me from trying to make a server again. I have been wanting to host a dedicated counter strike source server in steam for awhile.
    I followed all the port forwarding directions. I get the static ip set up and I open the 27015 port for steam.
    I will make a dedicated server and have a few people join and then I follow. Everything works perfectly for about 5 minutes and then my friends are dropped from the server due to loss of connection. I am still in the server but no one can join or even get info on it meaning the server is not responding.
    I then close out of steam and the server and find I have lost my internet connection. I can not visit any websites, I can not do anything in steam, I cant log onto aim, xfire or anything.
    Now my local connections dont say "Connection lost" like they do when the router is shut off or if I lose the actual connection.
    The only way it seems I can get my connection back is by unplugging the router, waiting 20s and plugging it back in. Then I have to wait about 5 more mins and it will just all of a sudden work.
    Does anyone have an idea of what is happening? Is it the router? My antivirus/firewall?
    Thanks in advance
    Greg
    Message Edited by netsurferdude2 on 08-25-2008 09:26 PM
    Hi
    Try disabling the firewalls and access server side.
    see if any change?
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Bluetooth connection lost after wakeup ( CSR - bc4 )

    hi
    after wakeup, my aluminium keyboard cannot connect anymore to my macbook pro. when i go to systempreferences/bluetooth i can see the bluetooth's host name is CSR - bc4 (???). when i turn bluetooth off and on again the hostname does set correctly to the name of my macbook-pro. after the restart of the bluetooth-service my keyboard works like a charm.
    any suggestions?
    greetings from switzerland

    I am having the same problem.
    If I use the new aluminium wireless keyboard (with my existing wireless mighty mouse) neither the mouse nor the keyboard reconnect to the computer on waking from sleep - it does announce that I have lost the bluetooth connection but tapping/clicking/waiting doesn't facilitate reconnection.
    If I send the iMac to sleep again (using the power button - the only way I have to get any signal to my machine at this point - I haven't tried Morse Code yet) it does then recognise the peripherals on waking the second time.
    I have also noticed that if I turn the mouse and keyboard off causing the "connection lost" warning and then put the machine to sleep, everything does reconnect on waking (switching them back on of course).
    I have it set not to wake from sleep using bluetooth devices, so that I can tidy my mouse/keyboard away without disturbing the mac. Using my old white wireless keyboard (but the same Mighty Mouse) it works beautifully again as it always did in Tiger with only a minimal delay on waking from sleep before reconnecting automatically.
    The aluminium keyboard is beautiful. But we need a fix - anyone? Is it a hardware problem? A set of dud keyboards? Has anyone found that a different aluminium wireless keyboard does work with the same setup? Or that their troublemaking keyboard does work on other machines?
    S
    Message was edited by: Beluga2

  • Connection lost after 2 songs have been played.

    Everytime I play songs from my macbook to ATV2 it plays only 2 - 3 songs then it hangs. I just got 4 songs out of it. I have to disconnect my home share and re connect to start it again. Any ideas why this would be happening. I've browsed the forum to see that other people have this issue, but there is no answer as to what is causing it. Surely its not the router as I have a new router. ATV2 streams movies without any interruption so I dont get why it happens to songs through itunes.

    netsurferdude2 wrote:
    Hi all,
    Lets start off with some info. I have a XP machine with a WRT310N router but the connection to the router from my computer is wired. I have other computers on the network(a wired XP work comp and a wireless vista laptop). I do have linksys Easylink Adviser but it is was to laggy and doesnt work half the time so I dont use it. My antivirus software is Panda Internet Security 2008.
    My problem has only occurred twice but it has prevented me from trying to make a server again. I have been wanting to host a dedicated counter strike source server in steam for awhile.
    I followed all the port forwarding directions. I get the static ip set up and I open the 27015 port for steam.
    I will make a dedicated server and have a few people join and then I follow. Everything works perfectly for about 5 minutes and then my friends are dropped from the server due to loss of connection. I am still in the server but no one can join or even get info on it meaning the server is not responding.
    I then close out of steam and the server and find I have lost my internet connection. I can not visit any websites, I can not do anything in steam, I cant log onto aim, xfire or anything.
    Now my local connections dont say "Connection lost" like they do when the router is shut off or if I lose the actual connection.
    The only way it seems I can get my connection back is by unplugging the router, waiting 20s and plugging it back in. Then I have to wait about 5 more mins and it will just all of a sudden work.
    Does anyone have an idea of what is happening? Is it the router? My antivirus/firewall?
    Thanks in advance
    Greg
    Message Edited by netsurferdude2 on 08-25-2008 09:26 PM
    Hi
    Try disabling the firewalls and access server side.
    see if any change?
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Wireless connection lost after macbook pro sleeps for more than 15 minutes

    It's annoying. I have a brand new macbookpro 3.06Ghz 17" hi-res screen running OS-X 10.6.3 and the wireless connection keeps dropping after the computer is either turned off or sleeping for more than 15 minutes.
    My router is a linksys wireless G, has dd-wrt software in it which is very powerful. When I release or renew the DHCP at the router, the mackbook connects to the wireless network, no problem.
    What configuration can be done at the macbook as to not have it time-out airport wireless connections unless I renew/release DHCP at the router? This is an annoyance beyond the limits of anyone's patience.... Thanks in advance for any help!

    Well, since nobody answered this post I decided to try a bunch of things and I believe I came to a solution:
    1 - Make airport the first connection under System Preferences->Network
    2 - In the advanced window:
    - Under AirPort: Keep only one network name on the list (the one you use all the time)
    - Select 'remember networks this computer has joined' and deselect all other boxes
    - Take note of the Airport ID (xx:xx:xx:xx:xx) and put it in your router's MAC address list. I do this because I only allow connections to my router from mac IDs that are on the list I create. In my case, I have my macbook pro and my PS3 system. If you don't know how to edit the MAC list in your router, do some research. It's pretty easy.
    - Under TCP/IP: Select "Using DHCP" on the IPv4 drop box
    - Select "Off" for IPV6 drop box
    - Under DNS, after you connect at least once, you should see (grayed out) your router's IP address on the left box and the domain on the right side box.
    Finally, under "Ethernet" you should see your Mac address there, the configure option should be set to Automatically and MTU as standard (1500).
    Press OK and then press "Apply" and lock that screen by clicking on the padlock at the bottom left. BTW on the top of this screen Location should be "Automatic" - if not, select it and apply.
    Done! Your wireless should connect quickly after the computer is turned on or waken up from sleep state. This assumes you configured your router correctly (mac addresses, frequencies, etc).
    Good Luck to all who try this - at least I have not have any more dropped wireless connections.
    Message was edited by: KEForex
    Message was edited by: KEForex

  • Wireless Internet connectivity lost after sleep

    I've got a problem where I keep losing my wireless network connection after going to sleep.
    The situation is that I'm connecting to my university's secure network. I have the credentials saved on my MacBook. When I need to go and leave my computer on my desk, I go back to the login window, and close the lid. When I come back and open it again, I'm instantly asked for the network password, at the login screen. Regardless of whether I enter it or dismiss the dialog, I'm unable to get a connection automatically after I resume my user session. There's an exclamation mark on the network icon and it says that there's no internet connection on the menu. When I click on this warning, I'm asked to repair the network connection and re-connect to it. This works, but I'd much rather that this be done automatically. Is there no way for me to resume connectivity after waking up my MacBook without having to manually re-connect?
    Thanks in advance for any suggestions.

    The problem's still happening in 10.6.2. I lose my Internet connection when I go back to the login window, then close the lid on my MacBook so that it goes to sleep. When I awake it, and log back in, I'm shown as being connected to the network, but not to the Internet. I have to manually re-connect.
    When I just close the lid without exiting to the login window, it appears that my Internet connection is re-established automatically, though, on re-awakening. I'm puzzled as to why this is occurring. It looks like a bug to me.

  • Macbook connectivity lost after waking up from sleep mode or rebooting

    Being an Ex-Microsoft user , I am sad to say that Microsoft products still beats Apple's MAC in stability for certain functions.
    For instance, this Macbook laptop does not seem to be able to reconnect to the home's gateway/ router (or any other gateway, for the matter) after it wakes up from sleep mode or rebooting.
    I've read several similar posts on this topic in the internet and am convince to say that it is not the gateway/ router that the Mac is connected to giving the problem as there are other computers(Microsoft-based) connected to the same gateway working perfectly fine.
    Furthermore the Fujitsu laptop I was using previously had connected to the gateway flawlessly... until the darn-thing broke down (grumble....grumble...)
    So far, it seemingly so, that no other person has managed to figure and resolve this one out yet. Also, no Apple support staff has responded nor helped resolved other related-connectivity problems.
    Is there a real hope for us??

    The previous solution only worked for a few days.
    I have another fix from Apple that is working (for now):
    Go to the network preference pane and create a new location by using the location pull-down menu. Call it whatever you want.
    Select the new location. Choose the little tool icon dropdown under the left column of services and choose "set service order" Drag things around so that airport comes first and then ethernet. Save, apply, do what you need to do to save all of these settings. Restart the computer.
    There might have been some other steps, but these are the main and most important parts.
    The default configuration for service order is wrong and the computer gets hung looking around for a bluetooth or firewire network connection. After every major system update, check that the service order is set right--it could get overwritten.

  • Ethernet connection lost after update to 10.5.7

    I lost my Ethernet connection after the 10.5.7 update. I have checked all cables and ports. Any ideas?

    Hi, I tried rebooting with shift down, then rebooting again. No network still.
    I looked in /var/log/system.log, but nothing from AppleYukon2.
    I pasted the relevant portion from system.log beginning with the shutdown prior to rebooting with shift. I hope there's not too much text...........
    The log below includes the reboot while holding shift as well as the subsequent reboot.
    I did see several useful messages in the system log (below), for example:
    May 13 15:52:44 localhost kernel[0]: GbE en0: en0 Link down
    May 13 15:52:44 localhost kernel[0]: GbE en1: en1 Link down
    Thanks for your help.
    system.log
    May 13 15:49:54 charles-geiers-mac-pro shutdown[312]: SHUTDOWN_TIME: 1242244194 208851
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** /dev/rdisk0s2
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Root file system
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking Journaled HFS Plus volume.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking Extents Overflow file.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking Catalog file.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking multi-linked files.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking Catalog hierarchy.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking Extended Attributes file.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking volume bitmap.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** Checking volume information.
    May 13 15:52:33 localhost com.apple.launchctl.System[2]: ** The volume Macintosh HD appears to be OK.
    May 13 15:52:34 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
    May 13 15:52:34 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    May 13 15:52:34 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
    May 13 15:52:34 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
    May 13 15:52:34 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
    May 13 15:52:34 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    May 13 15:52:34 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    May 13 15:52:34 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
    May 13 15:52:36 localhost kernel[0]: npvhash=4095
    May 13 15:52:34 localhost kextd[9]: safe boot detected
    May 13 15:52:36 localhost kernel[0]: hi mem tramps at 0xffe00000
    May 13 15:52:34 localhost kextd[9]: safe boot; invalidating extensions caches
    May 13 15:52:36 localhost kernel[0]: PAE enabled
    May 13 15:52:36 localhost kernel[0]: 64 bit mode enabled
    May 13 15:52:36 localhost kernel[0]: Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
    May 13 15:52:36 localhost kernel[0]: standard timeslicing quantum is 10000 us
    May 13 15:52:36 localhost DirectoryService[10]: Launched version 5.7 (v514.25)
    May 13 15:52:36 localhost kernel[0]: vmpagebootstrap: 508305 free pages and 2637423 wired pages
    May 13 15:52:36 localhost kernel[0]: migtable_maxdispl = 79
    May 13 15:52:36 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:52:36 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=16 Enabled
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=18 Enabled
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=4 Enabled
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=20 Enabled
    May 13 15:52:36 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=6 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=22 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=8 LocalApicId=1 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=9 LocalApicId=17 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=10 LocalApicId=3 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=11 LocalApicId=19 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=12 LocalApicId=5 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=13 LocalApicId=21 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=14 LocalApicId=7 Enabled
    May 13 15:52:37 localhost kernel[0]: AppleACPICPU: ProcessorApicId=15 LocalApicId=23 Enabled
    May 13 15:52:37 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    May 13 15:52:37 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    May 13 15:52:37 localhost kernel[0]: calling mpopolicyinit for mb
    May 13 15:52:37 localhost kernel[0]: Seatbelt MACF policy initialized
    May 13 15:52:37 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    May 13 15:52:37 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    May 13 15:52:37 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    May 13 15:52:37 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    May 13 15:52:37 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May 13 15:52:37 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    May 13 15:52:37 localhost kernel[0]: MAC Framework successfully initialized
    May 13 15:52:37 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
    May 13 15:52:37 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    May 13 15:52:37 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:52:37 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    May 13 15:52:37 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:52:37: --- last message repeated 1 time ---
    May 13 15:52:37 localhost kernel[0]: mbinit: done
    May 13 15:52:37 localhost kernel[0]: Security auditing service present
    May 13 15:52:37 localhost kernel[0]: BSM auditing present
    May 13 15:52:37 localhost kernel[0]: rooting via boot-uuid from /chosen: E0EC2838-A9E8-3916-8A50-3F12A69E4A08
    May 13 15:52:37 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    May 13 15:52:37 localhost kernel[0]: Initializing Intel82574L: Version 1.0.1b40 Built Mar 31 2009 23:39:32 -- running on device at b9d0f0
    May 13 15:52:37 localhost kernel[0]: Initializing Intel82574L: Version 1.0.1b40 Built Mar 31 2009 23:39:32 -- running on device at b10d0f0
    May 13 15:52:37 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 0023dffffedaf1b4; max speed s800.
    May 13 15:52:37 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/WDC WD6400AAKS-41H2B0 Media/IOGUIDPartitionScheme/Customer@2
    May 13 15:52:37 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    May 13 15:52:37 localhost kernel[0]: Extension "com.apple.driver.AppleHIDKeyboard" has no explicit kernel dependency; using version 6.0.
    May 13 15:52:37 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    May 13 15:52:37 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
    May 13 15:52:37 localhost kernel[0]: Jettisoning kernel linker.
    May 13 15:52:39 localhost kernel[0]: Intel82574L: Ethernet address 00:23:df:de:d7:34
    May 13 15:52:39 localhost kernel[0]: Intel82574L: Ethernet address 00:23:df:df:68:1e
    May 13 15:52:42 localhost kernel[0]: Resetting IOCatalogue.
    May 13 15:52:42 localhost kextd[9]: 0 cached, 288 uncached personalities to catalog
    May 13 15:52:42 localhost kernel[0]: PXS1: family specific matching fails
    May 13 15:52:42 localhost kernel[0]: Matching service count = 1
    May 13 15:52:43 localhost kernel[0]: Previous Shutdown Cause: 3
    May 13 15:52:43 localhost kernel[0]: NVDANV50HAL loaded and registered.
    May 13 15:52:43 localhost mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[16]: starting
    May 13 15:52:43 localhost kernel[0]: PXS1: family specific matching fails
    May 13 15:52:44: --- last message repeated 1 time ---
    May 13 15:52:44 localhost kernel[0]: Matching service count = 0
    May 13 15:52:44 localhost kernel[0]: GbE en0: en0 Link down
    May 13 15:52:44 localhost kernel[0]: GbE en1: en1 Link down
    May 13 15:52:45 localhost configd[14]: AppleTalk startup
    May 13 15:52:45 charles-geiers-mac-pro configd[14]: setting hostname to "charles-geiers-mac-pro.local"
    May 13 15:52:45 charles-geiers-mac-pro com.apple.launchd[1] (com.openssh.sshd): Unknown key: SHAuthorizationRight
    May 13 15:52:45 charles-geiers-mac-pro bootlog[54]: BOOT_TIME: 1242244224 0
    May 13 15:52:46 charles-geiers-mac-pro fseventsd[45]: event logs in /.fseventsd out of sync with volume. destroying old logs. (2 142 172)
    May 13 15:52:46 charles-geiers-mac-pro rpc.statd[36]: statd.notify - no notifications needed
    May 13 15:52:46 charles-geiers-mac-pro com.apple.launchd[1] (com.apple.distccdConfigd[49]): Exited with exit code: 255
    May 13 15:52:46 charles-geiers-mac-pro fseventsd[45]: log dir: /.fseventsd getting new uuid: 2E3BEC06-C8D1-4BCC-ABAC-AA9AA7CD83AA
    May 13 15:52:47 charles-geiers-mac-pro org.ntp.ntpd[32]: Error : nodename nor servname provided, or not known
    May 13 15:52:47 charles-geiers-mac-pro ntpdate[65]: can't find host time.apple.com
    May 13 15:52:47 charles-geiers-mac-pro ntpdate[65]: no servers can be used, exiting
    May 13 15:52:48 charles-geiers-mac-pro com.apple.configureLocalKDC[52]: sh: /usr/libexec/PlistBuddy: No such file or directory
    May 13 15:52:48 charles-geiers-mac-pro com.apple.configureLocalKDC[52]: Error: configureLocalKDC cannot parse /var/db/dslocal/nodes/Default/config/KerberosKDC.plist
    May 13 15:52:48 charles-geiers-mac-pro com.apple.launchd[1] (com.apple.configureLocalKDC[52]): Exited with exit code: 1
    May 13 15:52:48 charles-geiers-mac-pro kernel[0]: GbE en1: en1 Link down
    May 13 15:52:49 charles-geiers-mac-pro kernel[0]: GbE en0: en0 Link down
    May 13 15:52:49 charles-geiers-mac-pro kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
    May 13 15:52:49 charles-geiers-mac-pro blued[55]: Apple Bluetooth daemon started.
    May 13 15:52:50 charles-geiers-mac-pro kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
    May 13 15:52:50: --- last message repeated 10 times ---
    May 13 15:52:50 charles-geiers-mac-pro configd[14]: AppleTalk startup complete
    May 13 15:52:51 charles-geiers-mac-pro kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
    May 13 15:52:51 charles-geiers-mac-pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[40]: Login Window Application Started -- Threaded auth
    May 13 15:52:51 charles-geiers-mac-pro /usr/sbin/ocspd[77]: starting
    May 13 15:52:53 charles-geiers-mac-pro kernel[0]: GbE en0: en0 Link down
    May 13 15:52:53 charles-geiers-mac-pro kextd[9]: writing kernel link data to /var/run/mach.sym
    May 13 15:52:56 charles-geiers-mac-pro com.apple.ATSServer[81]: FODBCheck: New annex file created
    May 13 15:52:56 charles-geiers-mac-pro fseventsd[45]: bumping event counter to: 0x7132b0 (current 0x1eb) from log file '0000000000001c08'
    May 13 15:52:57 charles-geiers-mac-pro fseventsd[45]: bumping event counter to: 0x71333f (current 0x71332e) from log file '00000000000008ac'
    May 13 15:52:57 charles-geiers-mac-pro com.apple.SystemStarter[34]: Starting D-Bus System Bus
    May 13 15:53:05 charles-geiers-mac-pro loginwindow[40]: Login Window Started Security Agent
    May 13 15:53:26 charles-geiers-mac-pro com.apple.dyld[11]: updatedyld_sharedcache[11] regenerated cache for arch=i386
    May 13 15:53:26 charles-geiers-mac-pro loginwindow[40]: Login Window - Returned from Security Agent
    May 13 15:53:26 charles-geiers-mac-pro shutdown[111]: reboot by _mdnsresponder:
    May 13 15:53:26 charles-geiers-mac-pro shutdown[111]: SHUTDOWN_TIME: 1242244406 976183
    May 13 15:53:26 charles-geiers-mac-pro com.apple.loginwindow[40]: Shutdown NOW!
    May 13 15:53:26 charles-geiers-mac-pro mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[16]: stopping
    May 13 15:53:26 charles-geiers-mac-pro com.apple.loginwindow[40]: System shutdown time has arrived^G^G
    May 13 15:53:27 charles-geiers-mac-pro /usr/sbin/kdcmond[42]: dnssd_clientstub read_all(3) failed 0/28 0
    May 13 15:53:59 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
    May 13 15:53:59 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    May 13 15:53:59 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
    May 13 15:53:59 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
    May 13 15:53:59 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
    May 13 15:53:59 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    May 13 15:53:59 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    May 13 15:53:59 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
    May 13 15:54:01 localhost kernel[0]: npvhash=4095
    May 13 15:54:00 localhost DirectoryService[11]: Launched version 5.7 (v514.25)
    May 13 15:54:01 localhost kernel[0]: hi mem tramps at 0xffe00000
    May 13 15:54:01 localhost kernel[0]: PAE enabled
    May 13 15:54:01 localhost kernel[0]: 64 bit mode enabled
    May 13 15:54:01 localhost kernel[0]: Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
    May 13 15:54:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
    May 13 15:54:01 localhost kernel[0]: vmpagebootstrap: 3037903 free pages and 107825 wired pages
    May 13 15:54:01 localhost kernel[0]: migtable_maxdispl = 79
    May 13 15:54:01 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:54:01 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=16 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=18 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=4 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=20 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=6 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=22 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=8 LocalApicId=1 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=9 LocalApicId=17 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=10 LocalApicId=3 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=11 LocalApicId=19 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=12 LocalApicId=5 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=13 LocalApicId=21 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=14 LocalApicId=7 Enabled
    May 13 15:54:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=15 LocalApicId=23 Enabled
    May 13 15:54:01 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    May 13 15:54:01 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    May 13 15:54:01 localhost kernel[0]: calling mpopolicyinit for mb
    May 13 15:54:01 localhost kernel[0]: Seatbelt MACF policy initialized
    May 13 15:54:01 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    May 13 15:54:01 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    May 13 15:54:01 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    May 13 15:54:01 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    May 13 15:54:01 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May 13 15:54:01 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    May 13 15:54:01 localhost kernel[0]: MAC Framework successfully initialized
    May 13 15:54:01 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
    May 13 15:54:01 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    May 13 15:54:01 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:54:01 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    May 13 15:54:01 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    May 13 15:54:01: --- last message repeated 1 time ---
    May 13 15:54:01 localhost kernel[0]: mbinit: done
    May 13 15:54:01 localhost kernel[0]: Security auditing service present
    May 13 15:54:01 localhost kernel[0]: BSM auditing present
    May 13 15:54:01 localhost kernel[0]: rooting via boot-uuid from /chosen: E0EC2838-A9E8-3916-8A50-3F12A69E4A08
    May 13 15:54:01 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    May 13 15:54:01 localhost kernel[0]: Initializing Intel82574L: Version 1.0.1b40 Built Mar 31 2009 23:39:32 -- running on device at b9d0f0
    May 13 15:54:01 localhost kernel[0]: Initializing Intel82574L: Version 1.0.1b40 Built Mar 31 2009 23:39:32 -- running on device at b10d0f0
    May 13 15:54:01 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 0023dffffedaf1b4; max speed s800.
    May 13 15:54:01 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/WDC WD6400AAKS-41H2B0 Media/IOGUIDPartitionScheme/Customer@2
    May 13 15:54:01 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    May 13 15:54:01 localhost kernel[0]: Extension "com.apple.driver.AppleHIDKeyboard" has no explicit kernel dependency; using version 6.0.
    May 13 15:54:01 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
    May 13 15:54:01 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    May 13 15:54:01 localhost kernel[0]: Jettisoning kernel linker.
    May 13 15:54:01 localhost kernel[0]: Intel82574L: Ethernet address 00:23:df:de:d7:34
    May 13 15:54:01 localhost kernel[0]: Intel82574L: Ethernet address 00:23:df:df:68:1e
    May 13 15:54:01 localhost mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[16]: starting
    May 13 15:54:02 localhost com.apple.launchd[1] (com.openssh.sshd): Unknown key: SHAuthorizationRight
    May 13 15:54:03 localhost kernel[0]: GbE en0: en0 Link down
    May 13 15:54:03 localhost kernel[0]: GbE en1: en1 Link down
    May 13 15:54:03 localhost configd[14]: AppleTalk startup
    May 13 15:54:03 charles-geiers-mac-pro configd[14]: setting hostname to "charles-geiers-mac-pro.local"
    May 13 15:54:07 charles-geiers-mac-pro bootlog[47]: BOOT_TIME: 1242244435 0
    May 13 15:54:07 charles-geiers-mac-pro com.apple.configureLocalKDC[45]: sh: /usr/libexec/PlistBuddy: No such file or directory
    May 13 15:54:07 charles-geiers-mac-pro com.apple.configureLocalKDC[45]: Error: configureLocalKDC cannot parse /var/db/dslocal/nodes/Default/config/KerberosKDC.plist
    May 13 15:54:07 charles-geiers-mac-pro com.apple.launchd[1] (com.apple.configureLocalKDC[45]): Exited with exit code: 1
    May 13 15:54:07 charles-geiers-mac-pro org.ntp.ntpd[25]: Error : nodename nor servname provided, or not known
    May 13 15:54:07 charles-geiers-mac-pro ntpdate[61]: can't find host time.apple.com
    May 13 15:54:07 charles-geiers-mac-pro com.apple.launchd[1] (com.apple.distccdConfigd[42]): Exited with exit code: 255
    May 13 15:54:07 charles-geiers-mac-pro kernel[0]: GbE en1: en1 Link down
    May 13 15:54:07 charles-geiers-mac-pro ntpdate[61]: no servers can be used, exiting
    May 13 15:54:07 charles-geiers-mac-pro Parallels[66]: Starting Parallels networking...
    May 13 15:54:07 charles-geiers-mac-pro rpc.statd[29]: statd.notify - no notifications needed
    May 13 15:54:07 charles-geiers-mac-pro fseventsd[38]: bumping event counter to: 0x71355c (current 0x0) from log file '000000000000008b'
    May 13 15:54:08 charles-geiers-mac-pro kernel[0]: GbE en0: en0 Link down
    May 13 15:54:08 charles-geiers-mac-pro kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
    May 13 15:54:08 charles-geiers-mac-pro blued[48]: Apple Bluetooth daemon started.
    May 13 15:54:08 charles-geiers-mac-pro kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
    May 13 15:54:08: --- last message repeated 1 time ---
    May 13 15:54:08 charles-geiers-mac-pro /usr/sbin/ocspd[91]: starting
    May 13 15:54:08 charles-geiers-mac-pro kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
    May 13 15:54:09: --- last message repeated 9 times ---
    May 13 15:54:09 charles-geiers-mac-pro configd[14]: AppleTalk startup complete
    May 13 15:54:10 charles-geiers-mac-pro kernel[0]: Resetting IOCatalogue.
    May 13 15:54:10 charles-geiers-mac-pro kextd[10]: 429 cached, 0 uncached personalities to catalog
    May 13 15:54:10 charles-geiers-mac-pro kernel[0]: PXS1: family specific matching fails
    May 13 15:54:10 charles-geiers-mac-pro kernel[0]: Matching service count = 1
    May 13 15:54:10 charles-geiers-mac-pro kernel[0]: Matching service count = 19
    May 13 15:54:10: --- last message repeated 4 times ---
    May 13 15:54:10 charles-geiers-mac-pro kernel[0]: Matching service count = 20
    May 13 15:54:11 charles-geiers-mac-pro kernel[0]: MacPro4,1: stalling for module
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: Matching service count = 1
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: AppleTyMCEDriver::probe(MacPro4,1)
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: AppleTyMCEDriver::start(MacPro4,1) <1>
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: AppleTyMCEDriver::start coreVIDPID = 0x2c408086 Number of packages = 2 Number of cpus = 16
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: AppleTyMCEDriver::start memory monitor trough PCI
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: AppleTyMCEDriver::start 4 dimm slots per package
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: GbE en0: en0 Link down
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: Previous Shutdown Cause: 3
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: NVDANV50HAL loaded and registered.
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: PXS1: family specific matching fails
    May 13 15:54:12 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: kextload serialization lock busy; sleeping (89 retries left)
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: PXS1: family specific matching fails
    May 13 15:54:12 charles-geiers-mac-pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33]: Login Window Application Started -- Threaded auth
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: PXS1: family specific matching fails
    May 13 15:54:12: --- last message repeated 1 time ---
    May 13 15:54:12 charles-geiers-mac-pro kernel[0]: Matching service count = 0
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: /prl_hid/ Parallels HID Helper started.
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: /drv/ HypApic.c:235 Host APIC phy 0xFEE00000 lin 0xa5e64000 ver 0x15
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: /drv/ HypRealCpu.c:189 hypRealCpusInfoInit: STATUS_SUCCESS
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: /drv/ HypLowCache.c:158 Low cache initialized (11712 kB for 24 VMs on 12288 MB)
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: /drv/ HypModule.c:178 Parallels IPI irq = 0 ipi = 0(0x0)
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: /drv/ HypModule.c:181 Parallels Hypervisor 4.0.3540.209168 loaded.
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: com.parallels.kext.prlnet 4.0.3540.209168 has started.
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: com.parallels.kext.vnic 4.0.3540.209168 has started.
    May 13 15:54:13 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: kextload: extension /System/Library/Extensions/prl_vnic.kext is already loaded
    May 13 15:54:13 charles-geiers-mac-pro /Library/Parallels/Parallels Service.app/Contents/MacOS/prlnetstart[70]: [PrlNet] PrlAdaptersKext has been already loaded (0)
    May 13 15:54:13 charles-geiers-mac-pro /Library/Parallels/Parallels Service.app/Contents/MacOS/prlnetstart[70]: [loadPrlNetbridgeKext] /sbin/kextload /System/Library/Extensions/prl_netbridge.kext
    May 13 15:54:13 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: kextload: extension /System/Library/Extensions/prl_netbridge.kext is already loaded
    May 13 15:54:13 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: kextload: extension /System/Library/Extensions/prl_vnic.kext is already loaded
    May 13 15:54:13 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: No suitable device found for PVS0.
    May 13 15:54:13 charles-geiers-mac-pro kernel[0]: comparallels_kext_prl_vnic_device0: Ethernet address 00:1c:42:00:00:08
    May 13 15:54:14 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: kextload: extension /System/Library/Extensions/prl_vnic.kext is already loaded
    May 13 15:54:14 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: No suitable device found for PVS1.
    May 13 15:54:14 charles-geiers-mac-pro kernel[0]: comparallels_kext_prl_vnic_device1: Ethernet address 00:1c:42:00:00:09
    May 13 15:54:17 charles-geiers-mac-pro com.apple.launchd[1] (com.parallels.vm.prl_naptd): Unknown key for boolean: SuccessfulExit
    May 13 15:54:17 charles-geiers-mac-pro prl_naptd[152]: Starting Parallels Network Daemon
    May 13 15:54:17 charles-geiers-mac-pro prl_naptd[152]: en4: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
    May 13 15:54:17 charles-geiers-mac-pro prl_naptd[152]: en5: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
    May 13 15:54:17 charles-geiers-mac-pro com.apple.SystemStarter[27]: Starting D-Bus System Bus
    May 13 15:54:18 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: Configuring en4...
    May 13 15:54:18 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: No System Preferences changes required.
    May 13 15:54:18 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: Configuring en5...
    May 13 15:54:18 charles-geiers-mac-pro com.parallels.desktop.launchdaemon[52]: No System Preferences changes required.
    May 13 15:54:18 charles-geiers-mac-pro Parallels[158]: Parallels networking sucessfully started
    May 13 15:54:19 charles-geiers-mac-pro prl_naptd[152]: Reloading configuration...
    May 13 15:54:19 charles-geiers-mac-pro Parallels[162]: Restarting CiscoVPN
    May 13 15:54:19 charles-geiers-mac-pro SystemStarter[164]: Unknown service: CiscoVPN
    May 13 15:54:19 charles-geiers-mac-pro Parallels[167]: Starting Parallels Dispatcher Service
    May 13 15:54:19 charles-geiers-mac-pro prl_naptd[152]: en4: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
    May 13 15:54:19 charles-geiers-mac-pro prl_naptd[152]: en5: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
    May 13 15:54:25 charles-geiers-mac-pro loginwindow[33]: Login Window Started Security Agent
    May 13 15:54:25 charles-geiers-mac-pro authorizationhost[184]: MechanismInvoke 0x1271a0 retainCount 2
    May 13 15:54:25 charles-geiers-mac-pro SecurityAgent[185]: MechanismInvoke 0x1015f0 retainCount 1
    May 13 15:54:25 charles-geiers-mac-pro SecurityAgent[185]: MechanismDestroy 0x1015f0 retainCount 1
    May 13 15:54:25 charles-geiers-mac-pro loginwindow[33]: Login Window - Returned from Security Agent
    May 13 15:54:25 charles-geiers-mac-pro authorizationhost[184]: MechanismDestroy 0x1271a0 retainCount 2
    May 13 15:54:25 charles-geiers-mac-pro loginwindow[33]: USER_PROCESS: 33 console
    May 13 15:54:25 charles-geiers-mac-pro com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[180]): Exited: Terminated
    May 13 15:54:25 charles-geiers-mac-pro com.apple.launchd[1] (com.apple.ScreenSharing.server[179]): Exited: Terminated
    May 13 15:54:25 charles-geiers-mac-pro com.apple.launchd[138] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
    May 13 15:54:25 charles-geiers-mac-pro com.apple.launchd[138] (org.x.startx): Unknown key for boolean: EnableTransactions
    May 13 15:54:25 charles-geiers-mac-pro com.apple.ATSServer[198]: FODBCheck: New annex file created
    May 13 15:54:26 charles-geiers-mac-pro /System/Library/CoreServices/coreservicesd[81]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Macintosh HD) returned -14135
    May 13 15:54:26 charles-geiers-mac-pro /System/Library/CoreServices/coreservicesd[81]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Kai Hwang's Public Folder) returned -14135
    May 13 15:54:26 charles-geiers-mac-pro /System/Library/CoreServices/coreservicesd[81]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Charles Geier's Public Folder) returned -14135
    May 13 15:54:26 charles-geiers-mac-pro com.apple.launchd[138] ([email protected][187]): Exited with exit code: 1
    May 13 15:54:27 charles-geiers-mac-pro kextd[10]: writing kernel link data to /var/run/mach.sym
    May 13 15:54:27 charles-geiers-mac-pro SystemUIServer[200]: \n MenuCracker\n see http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menus. Ignore the failure message that follow.
    May 13 15:54:28 charles-geiers-mac-pro SystemUIServer[200]: failed to load Menu Extra: NSBundle </Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuCracker.me nu> (loaded)
    May 13 15:54:28 charles-geiers-mac-pro SystemUIServer[200]: MenuCracker: Loading 'MenuMeterCPUExtra'.
    May 13 15:54:29 charles-geiers-mac-pro SystemUIServer[200]: MenuMeterCPU loaded.
    May 13 15:54:29 charles-geiers-mac-pro SystemUIServer[200]: MenuCracker: Loading 'MenuMeterMemExtra'.
    May 13 15:54:29 charles-geiers-mac-pro SystemUIServer[200]: MenuMeterMem loaded.
    May 13 15:54:29 charles-geiers-mac-pro SystemUIServer[200]: MenuCracker: Loading 'MenuMeterDiskExtra'.
    May 13 15:54:29 charles-geiers-mac-pro SystemUIServer[200]: MenuMeterDisk loaded.
    May 13 15:55:25 charles-geiers-mac-pro login[287]: USER_PROCESS: 287 ttys000
    May 13 15:57:14 charles-geiers-mac-pro fseventsd[38]: log dir: /Volumes/Untitled/.fseventsd getting new uuid: 11673E34-7260-45D5-82B5-530117D6C5C6
    May 13 15:57:14 charles-geiers-mac-pro /System/Library/CoreServices/backupd[366]: Backup requested due to disk attach
    May 13 15:57:14 charles-geiers-mac-pro /System/Library/CoreServices/backupd[366]: Starting standard backup
    May 13 15:57:15 charles-geiers-mac-pro /System/Library/CoreServices/backupd[366]: Backing up to: /Volumes/brains/Backups.backupdb
    May 13 15:57:15 charles-geiers-mac-pro /System/Library/CoreServices/backupd[366]: Event store UUIDs don't match for volume: Macintosh HD
    May 13 15:57:15 charles-geiers-mac-pro /System/Library/CoreServices/backupd[366]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|

  • Jdbc connection lost after idle time

    Dear users,
    i'm using the oracle 10g database. Now i found out that several programs (SQuirreL, QuantumDB,...) which use the ojdbc14 driver are losing connection to the database after about one hour idle time, but it is not set in db configuration to disconnect (eg parameter idle_time is not set). What could be the cause of this? Is this a error of jdbc (the java exception is something like socket lost) or is it a missconfiguration of the db?
    Thx for help.

    With a simple java program that makes a select on a database table over jdbc after one Hour idle_time this exception happens: (the program is started local on the database server so no firewall or router is between)
    java.sql.SQLException: No more data to read from socket
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
    at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1118)
    at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1070)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:478)
    at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
    at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:790)
    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
    at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)
    at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1272)
    at test$1.run(test.java:24)
    at test.main(test.java:55)

Maybe you are looking for

  • PB won't boot from drive or disc: HELP!

    I can turn the machine on with the power button, and the screen displays the grey background with Apple logo, and the spinning barred circle underneath. The circle just spins and spins. Also, the machine is suddenly very loud--fan or drive making a c

  • Just started, got lost

    I have just started my Ipad 2, update done, restarted and asked to continue, the screen stuck at enable location services, i clicked on next but no response...help please

  • Can anyone make distributed processing work?

    I have two high-spec iMacs, connected via Thunderbolt and ethernet. I go through the Compressor set up for group transcoding, tried many different settings combinations - it NEVER uses the second machine in the transcode. Episode Pro on same machines

  • Modified transition behavior over clip to slug combination

    FCP 7.0.3 steps to reproduce error 1. create a timeline with clip / slug / clip sequence 2. modify default transition to 15 frames instead of 30 3. drag the transition or use right click method at the clip to slug or slug to clip 4. result will be a

  • ResultSet Limitation

    Microsoft's database access technology (ADO) has a feature collected disconnected recordsets. You can open the connection, execute the query and subsequently close your connection. Afterwards, you can process your recordSet(equivalent to ResultSets).