Troubble with outlook: Automatically Sending/receiving 600+ tasks

Hello!
A customer to me is having some troubble with outlook 2010 automatically sending/receiving...
His outlook is set to automatically send and receive but the problem is that sometimes it performs over 600 tasks (see picture). this problem occurs a coupple of times per week and is quite frankly annoying.
The solutions i have tried so far are:
Turn off all programs and restart the computer.
Search the computer for virus/malware.
Looked for a datafile that could possibly make this happen.
Made sure that Cached exchange-mode is off.
Asked him to replace his keyboard if that might be the issue. (not configrmed yet though)
Create a new outlook profile.
Regards,
Joakim Alm

Hi Joakim,
Does it take long time to process Send/Receive in Outlook 2010? Please do the following changes:
1. Check whether there is any Anti-virus in the machine scanning all incoming and\or outgoing mails. If it is, please disable it.
2. Launch Outlook 2010 into safe mode, so that no COM Add-ins are loaded. And run Send/Receive and try to reproduce the behavior:
Click Start | Run | On the Open: line type (without quotes) “Outlook.exe /safe” | Click OK\Enter
3. If the issue continues in Outlook safe mode, please change a computer to configure the account to have a try.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Outlook 2013 - "schedule an automatic send/receive" NOT functioning

Here is yet another bug in Outlook 2013 which remains at large.
Yes, "schedule an automatic send/receive" is not functioning, except in the case of Hotmail/Outlook.com
The only time new emails are getting download are when the Send/Receive button is clicked, or when the inbox of the account is selected.
Other than that Email is not getting checked/downloaded every thirty minutes as it is setup to do.
Oh, and please none of those generic "create a new profile" answers.
Thank you.

Hi,
We have unmarked that thread. Sorry for any inconvenience caused.
We have tried several steps to narrow down the issue in the previous thread. The issue is a little difficult, may not good to troubleshoot in the forum. We highly recommend you
to contact our phone support to get more effective support.
Thank you for your support and understanding.
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Exchange Server 2010 - Problem configuring my server 2008 so my clients can use Outlook to send/receive e-mails

Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advance

Hi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support

Microsoft Outlook 2007 send/receive error with windows 8.1

I do have an IDEAPAD LENOVO with windows 8.1
Today, i made some updates to my laptop/tablet, and i have problems with the send/receive error on my Microsoft Outlook 2007, before that it was working fine.
Someone in the community know how I can fix it.
Thank you,
Moky

Hi,
What's the error message content you got? Please provide us more information about this problem so that we can resolve it more efficiently.
Meanwhile, please refer to the following KB article and follow the steps to troubleshoot the issue:
http://support.microsoft.com/kb/813514/en-us
Hope it helps.
Regards,
Steve Fan
TechNet Community Support

I would like find out how to recommend an app for the ipad. I have tried to use it exclusively but it just does not fulfill all of my needs making me go back to the PC. I want an app tha that will sync calender, notes, and tasks with outlook automatically

I need an app that will display my calender month view, and todays tasks on the same page and sync to outlook automatically. Also my company has a network drive on the cloud that i would like for my work docments to sync to. Can this work?

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Outlook 2013 send & receive is very slow or freezes

Hello. I recently purchased Office 2013 to install on my new laptop at the beginning of February. Everything was working fine up until a couple weeks ago. I am having issues in Outlook 2013, specifically I am not getting emails or when I send
emails they show as being sent but the customer never receives them. I have 2 email accounts setup and both are scheduled to automatically send and receive every 1 minute but even if I hit send & receive manually nothing works. Eventually the send/receive
window will open and freeze, showing "processing" or that there are 60 minutes left in trying to receive a message! I have never had an issue like this before and I need it to be fixed so I can continue to communicate with my customers! Please help!

Does it throw any error code? Make sure the internet/network doesn't have any issues? Check whether the same mailboxes can be accessed in their webmail interfaces (say, OWA) and see you don't face any send/receive issues with that?
Do check whether you can repro the issue by opening Outlook in safe mode or not (Outlook.exe /safe)? If issue is not reproduced, then I would suspect one of the Outlook add-in may be causing this above issue.
You can check the send/receive groups. For more info, you can refer:
http://office.microsoft.com/en-us/outlook-help/why-use-send-receive-groups-HA102749372.aspx
Let me know how it goes.
DeVa, M.S., {MSFT} Please remember to mark the replies as answers if they help

Outlook automatically sending blank emails

My Outlook is automatically replying to my emails with a blank message. My autoreply is turned off. I have changed my password and done a virus scan with no luck in reversing this problem.

Hi,
Which version of Outlook are you using?
Does this issue happen to all emails you received?
Does this issue continue if we receive emails from webmail site?
Please make sure you don't have any rule set to automatically send out emails. To check this, click Home tab > Rules > Manage Rules & Alerts, and then check if there is any related rule in the rules list.
If you installed any third-party add-in, please also try to temporarily disable the add-in and then test the issue again. If you have a virus scanner installed, please note that it may integrate itself with Outlook, which may also cause this issue. Please
contact the virus scanner support and disable the integration into Outlook to see the result.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2010 Send/Receive Issue

I have Windows. Office 2010. Norton Internet Security.
Microsoft Windows 8 x64 Business Edition (Build 9200)
Dell Inc. Inspiron 7720
iTunes 11.0.4.4
QuickTime 7.7.4
FairPlay 2.4.14
Apple Application Support 2.3.4
Using Outlook 2010, pop email addresses, if I edit a email in the outbox, it will get stuck there and not send. No errors. However, when i disable the iTunes outlook com add-in, it works as it should.
There is a bug in iTunes & Outlook 2010.

Hi,
The user can’t send/receive any emails, not just can’t forward emails to his phone, right? If I’ve misunderstood something, please feel free to let me know.
Did he forward emails to his phone with Outlook rules?
Did he get any error message or the outgoing emails just stuck in Outbox?
Can he send/receive emails from web access? If not, please contact the user’s ISP to help resolve the problem.
If web mail works fine, we can follow the steps below to troubleshoot the issue on Outlook side:
1. Please check if Outlook shows Disconnect on the bottom of the Window. Hold Ctrl key and right click on the Outlook icon on the tray, click Connection Status to check if your email account is disconnected.
2. If the user installed any security programs, please temporarily turn off them to check the result.
3. Try to reset Send/Receive settings to check the result. To do this, go to
C:\Users\%username%\AppData\Roaming\Microsoft\Outlook\
Locate the <profilename>.srs file and rename it to
<profilename>.old and restart Outlook to check the result.
4. If above not working, please try to create a new mail profile and setup the email account in the new profile to check the result.
http://support.microsoft.com/kb/829918
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Outlook 2011 send/receive schedules don't work

I have to manually send/receive email since I upgraded to OS LION. Schedules don't work anymore, whatever I tried. Anyone with the same problem?

I use the following settings in Outlook and they work without problem. It may be that you will need to delete the account and set it up again. If you do delete it make sure that you back up any emails that are on your computer.
Your Name
Email address: Full btinternet email address
Account type: IMAP or (POP)
Incoming server: mail.btinternet.com
Outgoing server: mail.btinternet.com
Logon information:
User name: prefix only of email address
Password: Email password
Tick remember password
Do not tick Require password auth (SPA)
Click Button More settings
Tick box my out going server requires authentication
Tick box use same as incoming
Do not tick log onto incoming server
Advanced Button
Incoming server 993 or (POP 995) Tick requires SSL
Outgoing server 465 Use following type encryption SSL

Outlook 2010 send/receive problems

when trying to send/receive, receive error message "not implemented"

Also try to reset your srs-file to check if it helps. See:
http://www.msoutlook.info/question/164
This issue also occurs if Outlook installation itself is broken. Try to
run a repair of your Office installation to check the result. Same scenario and solution described here:
http://www.msoutlook.info/question/825
Best Regards,
Steve Fan
TechNet Community Support

MS Project 2010 with Outlook 2013 - "send as attachment" missing function / not working

Office 2013 Professional running on Windows 7 (64bit).
After Re-installing MS Project 2010 today the option under
File (alt-f) --> 'Save & Send' --> 'Send as Attachment' is shaded out / unavailable.
Is this a known integration gap between the older MS Project and Current Outlook ? Alternatively, does anyone have any recommendations to troubleshoot and / or enable the function within MS Project 2010?
Thanks for any suggestions , guidance or pointers.
p.s I have tried completing a repair on Office 2013 and the MS Project 2010 from within the control panel.
This functionality is working with all other Office 2013 applications in the suite (Excel, PowerPoint, Word, Visio etc.)

Julie ,
Kinda / sorta ... In Mid 2014 I had MS Project installed and working (I can't confirm if the Send as Attachment was working at that time...) A few days ago I was sent an '.mpp' (MS Project file) for review. When I attempted to open it MS Project
gave me a warning message that it needed to start in safe mode but then failed to start. This seemed weird and thus began two days of googling and investigation.
I elected to uninstall (which also failed) and reinstall (which also failed) the MS Project 2010 since I have the media at hand to do so. At this point I was really truly 'stuck' (p.c term for the younger audience reading this).
My course of action was to engage Microsoft Support (specifically the MS Office group). They verified some registry entries, confirmed installation of MS Project 2010 , confirmed files were installed , available and in the appropriate
spots (files etc.) , tried a few 'fixit' tools , made multiple suggestions that I spend $1000+ on upgrading to MS Project 2013. After ~90 minutes or so they were able to 'Force' the orphaned installation to uninstall. (although
they needed to install and use a 3rd party tool to do it) We then re-installed MS Project 2010 and verified it could start.
After using project a little bit I realized that 'Send as Attachment' option was non-functional. I spent a few hours trying to research (more google) and finally threw in the towel and cried out for help (i.e posted the message that started this
thread).
Thanks again for any suggestions or wisdom you are willing to share.

Trying to use the Tour 9630 with Outlook 2003 Calendar, Memo/Notes & Tasks. Can't Config & Complete....

I would like to use my Outlook 2003 with my Blackberry Tour 9630 to use the Calendar, Memo & Task features instead of entering everything on the BB. I use my Outlook Express 6 for my email input and output. The Outlook 2003 is not connected to the internet for use but on my computer as a free standing application. Everytime I attempt to config the Desktop with Calendar, Memo & Tasks I get a "Option Values is unacceptable. Pls check options properties". I do pick MS Outlook as the application to connect but continuely get that message above when I am at the end of the config process at selecting NEXT. I would like to use Outlook 2003 if it is ok to use and connect. Or is there any other application that I can easily purchase for an easier connect and config too. Pls assist me. Ed

Hello BklynBoy273 and welcome to the BlackBerry Support Community Forums.
Have you entered any information into Outlook yet?
The BlackBerry communicates with the Outlook data folder, called a pst.
KB02362 may offer you some help trying to get the sync configured.
Let me know how you make out.
Thanks! And have a great day
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Syncing E71 with Outlook Automatically

Hi everyone,
Have a question I'm hoping someone can help with. I've recently purchased the E71 (awesome phone). Wondering if there's any software/add-on which will allow for automatic updates of both my Outlook and E71 whenever a change is made on one of the two (without a physical connection/being in the same room).
Essentially I'm wondering if Nokia offers a service similar to the Apple service www.me.com compatible with the iPhone. This is a pretty cool service which will automatically (over the Internet/cell network) update your calendar/contacts on the phone within minutes of a change being made in Outlook (and vice versa).
It's a great tool for keeping things organized when on the road and I'm hoping Nokia would have a similar service.
Any thoughts??
Thanks

I use mail for exchange, which seems to make the E71 more useful.
You can purchase Exchange services and your mail contacts etc will work everywhere, you an also have your own domain name and other things. It works well
In the UK I use www.oneandone.co.uk it has a monthly charge, but works well. You also have www.mailforexchange.com that also offers a similar service.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Establish connection with database to send/receive data through Xcelsius

Hi
Iu2019m working on a Xcelsius project that requires to establish 2 way communication with the SQL server.
2 way communication requirement: When user selects an option (country) from the accordion component, it needs to send that to database as a query and retrieves that particular country data onto Xcelsius and refresh the chart data accordingly.
Iu2019m thinking of using ASPX to communicate between Xcelsius and the SQL server, but not sure how to proceed.
Appreciate if anyone can provide instructions or pointers to where I can get started with it
Thanks,
Malik

Malik,
I had worked on a similar requirement, where Sql server should be integrated with Xcelsius and should retrieve real time data.
Here is what we did...
-->Configured web service on SQL server side (you will find plenty of doc related to this on google)
-->Configured Web Service connection in Xcelsius (by passing the WSDL url generated from the SQL server)
-->Developed dashboard in Xcelsius which retrieves data from SQL server realtime i.e. when user passes Variable value through a component (Combo box or anything), then this value in inturn passed to webservice, and then this web service will retrieve the data to Xcelsius.
Hope this helps...
-Anil

Outlook 2010 Send & Receive Error 0x8DE00002

I need assistance in resolving the below error please:
'reported error (0x8DE00002) : 'There is an error synchronizing your mail account. Please verify your account is configured
correctly by first accessing your mail on the web. Error: 4102. Client. For nested folders, parent must be declared before child. '
I have no idea what this means or where to go and fix the problem. Too many hours lost already.
thank you :)

Hi,
Firstly, I would like to ask what’s the account type do you use?
Based on my experience, this error code mostly occur when you using Windows Live Account on Outlook. If this is the case, I suggest we firstly refer to the following article:
http://answers.microsoft.com/en-us/office/forum/office_2007-outlook/error-code-4201-and-8de00002-not-receiving/a88761f0-9ca5-48a0-bf6f-a15ea73b55c2
Thanks,
Simon Wu
TechNet Community Support

Troubble with outlook: Automatically Sending/receiving 600+ tasks

Similar Messages

Maybe you are looking for