Troubelshoot help on mic recording please

HI all,
thanks for looking in. I have lost my ability to record VO..It was wroking fine last time I used it. Went to use it again and nothing?
Win7Pro OS SvcPk1
AU updated
RealTek Driver
Followed this http://forums.adobe.com/message/4256315#4256315
Here are some screen grabs, of what I am looking at over here. I am not getting a mis match error when arming to record. Selecting record produces NILL..Flat Line
Latest updates were Quicktime, Flash and Silverlight Players. FWIW
Any tech guys out there help me troubleshoot the missing "unchecked box"? LOL!

W-D,
After reading your follow up, (me checking your suggestions) I did have success with using 48000 setting...What I needed to do is also change the Realtek Digital Output Playback device settings, to match. Not just the speakers and the Mic in.
I will delve further into your suggestion of an audio interface. However, I am not sure, but when I was buying my MOBO I did some research on the Soundcard at the time and Extreme 6 z77platform it boasted of a pretty nice soundcard stock, with a whisper upgrade... Maybe that is the interface?
I use an Azden mic for now, until I can score a seinheiser on sale...It is an Azden SGMx2 requires batteries. It also is a balanced XLR out, which I then use an adapter to 3.5MM or 1/8th" to plug into my computer...Maybe because I use the front jack I am getting a scuzzy white noise? Due to it being part if the 'el - cheapo' case....(Rosewill Challenger) My puter is a real sleeper. Looks like a Gremlin with a Blown 454 under the hood.
Check out this screen grab and let me know your thoughs on this... Is this from my Quadro cards sound ability or N/A to this scenario. Thanks for your help on this Wild_Duck
Appreciated for sure
Regards
NC

Similar Messages

Help with mic problems please!

Currently I have a Sound Blaster Audigy2 ZS sound card with I-Trigue L3500 speakers. I have had this system for a bit now and have never needed to use a mic till recently.
The system has a wired volume/bass control that plugs directly into the sub. It works fine but when I plug a headset into it I can hear sounds fine but can't use the mic function. The controller is clearly marked with 2 stereo mini plugs that seem to be labled with the uni'versal headphone/mic symbol and it seems so dummy proof, guess it isn't?
I'm using a Labtec headset, not the greatest one, but one that sold for about $25 at Best Buy which I guess makes it a mid level one at best.
Please any help that you can give me would be greatly appreciated!!!

i have the same problem. i am using an audigy 2 zs soundcard with a t7700 speaker system. i'd like to connect my mic to the volume control unit (because there is a microphone jack) ... but i am wondering why there is no cable connecting the subwoofer with any microphone jack on the sound card.
this brings me to to following question:
FOR WHAT PURPOSE IS THE MICROPHONE JACK ON THE VOLUME CONTROL UNIT?

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

I have a video in .avi format, what format do I need to convert to, to play on my DVD recorder, please can anyone help?

I have a video in .avi format, but what format do I need to convert to, to play on my DVD recorder, please can anyone help?

tylerfrombalantine's post had zero grammar in it, so it's not clear what he's saying. I bought a DVD recorder and the instruction manual lists all the disc formats it can play. Check your DVD recorder manual to see what works with it, then burn a DVD that matches. It should be fine to burn just a standard DVD, since of course any DVD player can play that.
Depending on the program you use, you may not have to convert anything manually. The program might convert your current video format to DVD on fly as it burns the disc.

My code not give me result and error for move to next record please see

hi master
sir i import this file also
import javax.faces.event.ValueChangeEvent;
then my error remove
i am use this code in button event
getMfatableDataProvider().cursorNext();
form1.discardSubmittedValues("virtualForm1");
and my textField is bounded with data provider table field
please give me idea how i show next rocord in page when user press button
thank's
aamir

thank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir

Extra fields in search help window in Record working time EHP5

Hi Experts,
Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
My system is EHP5 NW 7.02
I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
Please let me know how to make the other fields available.
Thanks in advance.
Sonia

Hi Siddharth,
Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
My requirement is to display more fields on search help OVS window.
Can you please suggest.
Thanks ,
Sonia

Help with inserting records conditionally in another table

I need some help on this task please. I have a table with some records like so
Table1
Column1 Column2 Column3 Colum4
1 Name1 Lastname1 1,2
2 Name2 Lastname2 3
3 Name3 Lastname3 NULL
4 Name4 Lastname4 1,3
So the last column, Column4 has the number of the column that the values got changed. So the values on the first row on the Columns 1 and 2 got changed. So I have to insert those values in another table and the same for the other records.
Table2
Column1 Column2 Column3
1 Name1 NULL
2 NULL Lastname2
4 NULL Lastname4
Any ideas on how to accomplish this? Any ideas would be much appreciated.

Hi
Try below, Next time please POST DDL & DML
select 1 Column1, 'Name1' Column2, 'Lastname1'Column3, '1,2' Colum4 into #temp union all
select 2 , 'Name2', 'Lastname2', '3' union all
select 3 , 'Name3' , 'Lastname3', NULL union all
select 4, 'Name4', 'Lastname4', '1,3'union all
select 5, 'Name4', 'Lastname4', '1'
select 1 Column1 ,'Name1' Column2, NULL Column3 into #temp1 union all
select 2 ,NULL ,'Lastname2' union all
select 4, NULL, 'Lastname4'
select Column1, Column2, Column3, Colum4 ,C2,C1 from #temp a
--(select Column1, Column2, Column3, case when Colum4 like '%,%' OR Colum4 IS null then Colum4 else Colum4+',' end as Colum4 from #temp) a
outer apply (select COALESCE(Column2,Column3) From #temp1 where column1 = parsename(replace(a.colum4,',','.'),1)) a1(C1)
outer apply (select COALESCE(Column2,Column3) From #temp1 where column1 = parsename(replace(a.colum4,',','.'),2)) a2(C2)
You can also use split function
http://sqlperformance.com/2012/07/t-sql-queries/split-strings
select a.*,COALESCE(a2.Column2,a2.Column3) From #temp a
cross apply dbo.Split(Colum4,',') a1
left outer join #temp1 a2 on a1.item=a2.Column1
Thanks
Saravana Kumar C

How to capture F4 help during bdc recording

Hello All,
I need one help to solve one of the requrimkents..
In transaction Co02, user have to add the compoenents manually..but before user adds the components manually, i need to call the transaction co02, then i have do F4 help and fill the data for the user and then user will handle it manually...
So till F4 help and filling the data in F4 help, i need to do through my program using bdc...when i try to do, F4 help is not captured in my recording..
So please help me how to capture F4 help during BDC recording.
Thanks in advance
Sangeetha

HI Sangeetha,
I have one question for you!!!!
Capturing F4 help in BDC recording is secondary thing. First, If you want the user to select the value from the F4 help, then in that case user will have to run the BDC program in the foreground mode which is not possible and time consuming if your file is having more records (say >100). Then in that case will you prompt the user every time for selecting the component values, as many records there will be in the file to be uploaded??? I think it is not a way of handling or capturing the component values. I would prefer that pass the component values in the file which has to be uploaded.
Please let me know if you still have some doubts on the same.
Thanks
VJ

My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.

My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.

The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.

How to get those Char Description when i record please give a solution

Hi Experts
when i try to extend using BDC the meterial all data is getting copied to new plant but in MRP3 Configure varients is not getting copied in bdc i am getting all the values from parent plant but these values are not getting displayed in new plant for only *MRP3 Configure varients
how to get those values please give a solution
and
when i am trying to make the BDC recording of creation of meterial in this process
in MRP3 when i give configurable meterial = Lamp or CT or VOLTMETER and when
i go for configurevariants button it's not displaying any Char Description for the perticular meterial
but in general when i creat a material process there Char Description are coming where i can give the values
how to get those Char Description when i record please give a solution

Hi Maen Anachronos
i am Getting popup where i can give any value
but in creation of meterial for a perticular config meterial there is will be 1 templete in which we will get some constant Char Description where we'll have some options to give the value
but when it 's done in BDC Recording it's not displaying any values Char Description then how can we decide the values to what to give when Recording

If you want to access the PowerShell 3.0 Help in another language please vote for my Connect suggestion!

All my Windows operating Systems are set to use the UI Culture: German
With Update-Help or Save-Help you can download PowerShell help in different (any) language by use of the –UICulture parameter.
Update-Help –UICulture en-US
Because my Windows OS is set to use the German UI Culture and the Cmdlet Get-Help depends on it, I cannot access PowerShell help in a different Language (English) with Get-Help.
There is still no translated German PowerShell help and even if I have installed the en-US verbose Help files I cannot use it (easily)!
I made a suggestion on Microsoft Connect to add the –UICulture Parameter to the Get-Help Cmdlet, to make it possible to call Help in a different language then the Windows Ui Culture.
As a workaround until then you can use the .NET Class [System.Threading.Thread]::CurrentThread.CurrentUICulture to set the UI Culture and get Help in a different language.
Function Get-HelpUICulture {
param (
[String]$HelpSearchString,
[String]$UICulture
# remember the UICulture
$OldCulture = [System.Threading.Thread]::CurrentThread.CurrentUICulture
trap
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $OldCulture
# set thread to given UICulture
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $UICulture
# call powershell help in given language
Get-Help $HelpSearchString -Full
# reset UICulture
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $OldCulture
# Example: call PowerShell en-US help in verbose English:
Get-HelpUICulture -HelpSearchString Get-Command -UICulture ‘en-US’
If you want to access the PowerShell 3.0 Help in another language please vote for my Connect suggestion!
https://connect.microsoft.com/PowerShell/feedback/details/767899/please-add-uiculture-to-get-help
Please click “Mark as Answer” if my post answers your question and click
“Vote As Helpful” if my Post helps you.
Bitte markiere hilfreiche Beiträge von mir als “Als Hilfreich bewerten” und Beiträge die deine Frage ganz oder teilweise beantwortet haben als
“Als Antwort markieren”.
My PowerShell Blog http://www.admin-source.info
[string](0..21|%{[char][int]([int]("{0:d}" -f 0x28)+('755964655967-86965747271757624-8796158066061').substring(($_*2),2))})-replace' '
German ? Come to German PowerShell Forum!

Hello JosKW
Thank you for your suggestions!
In my 3 Part Blog Series about the new 3.0 PowerShell, I offer a full blown Proxy Function for the Get-Help cmdlet to solve this better.
For now I have the first two Articles Published at my Blog, the Third Part will follow soon:
PowerShell 3.0 updateable help Update-Help, Save-Help und Get-Help Basics
http://www.admin-source.de/BlogDeu/497/powershell-3-0-updateable-help-update-help-save-help-und-get-help-grundlagen
PowerShell 3.0 updateable help Update-Help, Save-Help und Get-Help using
http://www.admin-source.de/BlogDeu/523/powershell-3-0-updateable-help-update-help-save-help-und-get-help-anwenden
The Articles are written in German. I think you as a Dutchman can read this.
Or you can use the Translate Button on my Page, to use Google Translate Service to read this in the Language of your choice. ;-))
Cheers Peter
Please click “Mark as Answer” if my post answers your question and click
“Vote As Helpful” if my Post helps you.
Bitte markiere hilfreiche Beiträge von mir als “Als Hilfreich bewerten” und Beiträge die deine Frage ganz oder teilweise beantwortet haben als
“Als Antwort markieren”.
My PowerShell Blog http://www.admin-source.info
[string](0..21|%{[char][int]([int]("{0:d}" -f 0x28)+('755964655967-86965747271757624-8796158066061').substring(($_*2),2))})-replace' '
German ? Come to German PowerShell Forum!

I need a help !!! Please ,I dropped my iPhone 5 in toilet and I didn't get fast maybe 5mins before I get it because I didn't notice drop it and it won't work now it's almost 1week I'm waiting it still it don't work ...

I need a help !!! Please ,I dropped my iPhone 5 in toilet and I didn't get fast maybe 5mins before I get it because I didn't notice drop it and it won't work now it's almost 1week I'm waiting it still it don't work ... But when I plug my charger it goes light and show up apple logo and die again I don't know what to do and it's so expensive here at Japan pls.. Help maybe there still way to get it work again
Thank you ,Rean

At this point it's clear that it's been damaged and will need to be take or sent to Apple for replacement.
Regards.

Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please

Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please .... Im using my usb as bootable device but it cant be detected..

Reboot, hold the option key down, select OSX when the startup manager appears.

Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help

Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help if you've the knowledge.
Many Thanks

Yep, i just did it again. The entire scroll-bar widget, complete with formatted text, graphics, etc., pasted itself nicely in another book. Two different files, the same widget.
I use the scroll-bar widgets for most of my texts. (I have audio buttons on the side, and the scripts are within the widget, to the side). My only text is within widgets, and text boxes, naturally.
I am following your recommendation: cleaning files, etc. I am remaking the book anew. I need to convince the EPUB bot or whatever that my file looks and works nicely on all my devices. You would expect an error message when previewing the book: 'Hey Amigo, your file is flawed, stop working on it, and get back to the drawing board." Should be able to try again next Monday.

My iCloud is disabled. I've reset my password numerous times, but that doesn't help. Can someone please tell me how can I log onto my iCloud

My iCloud is disabled. I've reset my password numerous times, but that doesn't help. Can someone please tell me how can I log onto my iCloud

If your ID is disabled, you'll have to contact Apple for assistance, either by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.

Troubelshoot help on mic recording please

Similar Messages

Maybe you are looking for