Trouble accessing my cisco webcam video in IOS6

any idea if the video loading in safari is going to get fix soon any ways to manually overide the settings to have access to my own webcam.

Hi,
Check that all processes are running post reboot. ISC may not have been configured to start automatically upon reboot. Check at $ISC_BASE/wdclient status. httpd process should be running correctly.
Configure https port as follows and then try connecting using https instead of http.
Step 1 Source the environment file, as follows:
For K shell: . $ISC_HOME/bin/vpnenv.sh
For C shell: source $ISC_HOME/bin/vpnenv.csh
Step 2 Run the command: configSecurePort.sh
where:
is the home directory for ISC, for example: /opt/isc-4.2
is the secure HTTPS port you want to use, for example: 8443.
is the name of the machine that ISC is installed on, for example: machinename.cisco.com.
Hope this helps.
Cheers,
Praj

Similar Messages

After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU.

After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU. How can I get the video app working with the iTunesU again?

I have a similar problem with ITunesU, I used to be able to access them from my car dock, but now they dont appear and the fwd/back buttons on the steering wheel wont affect them.
It seems taking them from ITunes into their own app has confused many other applications or dock connectors. Im going to try and remove the ITunesU app as I dont want to have lost the extra functionality

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

Having trouble accessing web sites

Since the last Security and Mac OS X Snow Leopard point update, I've had trouble accessing using websites. I've tried Safari, Firefox and Chrome and they all are broken in some way. This is happening across all my Macs. Using Safari at the weather.com site, I can't get the maps to load after 4:00--it just quits or keeps trying to load, With Firefox or Chrome I get the actual window under a window that says It can't find the page requested--see image below, nor will it load maps. With Netflix, I am unable to view artwork or display content summaries for video selection, I have a similar exoerience with Hulu--some graphic elements in the header aren't displayed. I've repaired permissions with no change. Anyone know what's up? Any help is appreciated.

Report it to apple
Open safari and get onto the site. Click "Safari" > Report bugs to apple

Camera for use with Cisco Unified Video advantage?

Cisco is EOLing the Cisco Unified video advantage product that we thought would be a good fit for us to integrate video with some of our IP Phones. I can still order the Video Advantage software until later in the year from Cisco but they have discontinued the Cisco VT Camera III that was previously used with this product.
They list the Logitech C920-C web cam as a replacement for this product, but it seems to be difficult to locate. The realease notes say you can use a 3rd party camera but Cisco does not officially support it.
Has anyone used any third party cameras with Cisco Unified Video advantage and if so which would you recomend. I was hoping to use the Logitech HD Pro Webcam C920 (the generic non Cisco version) but wasn't sure if it would work ok?
What do you think? This will be using Unified Video Advantage 2.3.
Jim

Hi,
We have been using Video advantage v 2.1.2 with 7940 series phone since long, it works fine with almost all 3rd party camera`s and even with the inbuilt laptop cameras.
v 2.3 is an enhanced version as compared the one which we are using. So i would suggest you to go ahead and try it with any good qaulity webcameras available in market.
Further to add there are certain PC requirements which needs to be met, the same can be found in the below link.
http://www.cisco.com/en/US/docs/video/cuva/2_3/release/notes/relnote_cuva23.html#wp1118706

[OS X] display live isight webcam video

I'd like to show live video (from the iSight webcam on my macbook) in a view. I'd also like to scan each frame and possibly change some pixels.
There are a ridiculous amount of APIs that I've come across in researching this: QuickTime, CoreImage, CoreVideo, Quartz, OpenGL, etc.
I found the sample-code project QTQuartzPlayer which is able to display live webcam video (and move the OpenGL camera). However, I've had some trouble dissecting the code, because of the various barely-documented API calls.
It seems like this line is the only thing that references the webcam in some way; It opens the default sequence grab component (which happens to be the webcam).
// SeqGrabComponent _grabber;
_grabber = OpenDefaultComponent(SeqGrabComponentType, 0);
It also seems that the stream from the webcam needs to be decompressed (using ICMDecompressionSession).
Anyways, can anyone give me some tips on how to accomplish this? In particular, look at/change pixels in each frame.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

MBA (mid 2013) and Cisco Jabber Video client not recognising any camera

The Cisco Jabber Video client is not recognising the internal Facetime HD camera nor the external USB Logitech Webcam C920.
This was not working from the beginning. Cisco is aware of this issue and promised to deliver a fix in the next release of their software.
After installing the 10.8.5 Update from App Store and the 10.8.5 Supplemental update the Cisco client was able to recognize the external camera.
After that I followed a hint to install the Combo update this should enable Skype to recognise the Facetime HD camera. After installing the Combo update Skype was able to recognize the internal and external camera (by the way the quality of preview video using Facetime HD was brilliant and much better than the internal camera of a MBA from 2012). BUT after that update the Cisco client was no longer recognising a camera.
I run a recovery installation of 10.8.4 - but the result was again a 10.8.5. If I try now to run a recovery install I only get a recovery of version 10.8.5 offered.
I did a SMC reset, a parameter RAM reset, tried to start in saved mode but nothing helped.
Any other ideas how to get a least an external camera working again with Cisco Jabber Video?

Similar problem here. I have a Logitech C615 camera/microphone plugged into my MAC mini running OSX 10.9.3. Today, JABBER could not find the camera (although it found the microphone?). I was running 4.5.7 and so downloaded v4.8.6 and reinstalled: no camera. I also downloaded the cloud version: no camera.
I was not running either Vidyo or Polycom RealPresence at the same time as JABBER
But, when I did run these apps, my camera & microphone both work.
Suggestions?
John

Why am I having trouble accessing my voicemails?

I am having trouble accessing my voicemails. This seems to happen randomly. Sometimes I can get them and sometimes I can't. I'm always notifiede that I have a voicemail, but usually I can't get it to play the recording.

If the App store app is crashing see:
IOS 6 App store crash: Apple Support Communities
For othe other problems try:
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Trouble accessing photos.

Hello! Need help! Having trouble accessing photos from Adobe Photoshop Album Starter Edition 3.0, I had a free trial but never registered the program because I was not using it. The other day I was taking pics off a Canon camera, & they automatically loaded into that site. I selected cancel several times, but the program did not respond. Once they completely loaded in, the program asked if I wanted to erase photos from the camera, I selected no but it started erasing them, I was able to stop it but 44 were erased off the camera. I can see the photos in the program but can not access them since I never registered. I tried to register now but received email saying that program has expired. So how do I get my photos? Please help! The photos are not mine, I was loading them from a friends camera, & they are important vacation memories to her! Thanks! Ruth

When you click on one of the thumbnails do you see a blank window where the full sized image? Or do you see this in the window:
In either case make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

Trouble accessing files on external USB drive after 10.6.8 update

Upgraded to Mac 10.6.8 on my MacBook Pro (I'm not a techie, but the "About This Mac" thingy says 2.53 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3 - I assume that means something to somebody). Since the upgrade, I've been having problems accessing data on an external HD connected via USB - there were no issues before the upgrade, but now it's impossible to even navigate to a particular file or subfolder half the time, as the process freezes 95% of the time (every so often I am able to get through, for no obvious reason) - usually I just get what looks like an empty folder and a little spinning thing in the bottom right-hand corner. Sometimes when I do get to a file - say it's a ZIP file - I'll try to unZIP it and the process will hang; if I try to drag it to the desktop and unZIP it there, I can't get it to copy to the desktop, I just get the "copying files" box and a bar that never shows any progress, it just hangs at zero bytes out of whatever it might be.
Also having intermittent issues with another external USB drive, which is the one I use for Time Machine - about one in every five backup attempts is successful, the rest of the time I get a message saying the backup couldn't be performed.
I have two external FireWire drives as well, and I'm having no trouble with either of those - so I'm assuming the problem is USB-related (and 10.6.8 related, since none of this was happening before the upgrade).
So - I'm wondering if anybody else is having the same issues, and f there's a solution that a non-techie like me could handle that won't make blood come out of my ears.
Cheers!

Thanks baltwo - the PRAM tip was helpful. For some reason I still have trouble accessing a few files, I'm putting that down to them being somehow corrupted. Eric, thanks, but I tried using Disk Utility and the communication problems I was having with the drive meant that the repair couldn't be performed. I may try again now that that side of things seems to be running a little more smoothly. Anyway, thank you both!

Trouble Accessing Virtual Machine After Time Machine Migration

I am hoping that someone else has run up against this problem and is able to help.
I recently purchased a new iMac. I upgraded to 8 GB of ram specifically because I have VMware Fusion and want to use it on my new machine.
I chose to migrate my entire old iMac to the new machine using my Time Machine backup.
VMware appears to have migrated successfully. I do not have any trouble accessing the application, but when I try to resume my only virtual machine, which is for Windows XP I get the following message:
VMware Fusion cannont connect to the virtual machine. Make sure you have rights to run the program and to access all directories it used and rights to access all directories for temporary files.
How do I resolve this problem?
Thanks in advance to anyone who is able to offer me a clue on how to overcome this.
If I can't access this machine it appears as if I will be able to create a new one. I would like to avoid having to do that if it is possible.
Terri Schurter

Captfred,
In that folder there is a virtual machine. It is called Windows XP Professional. So it is there. When I am in VMware Fusion I can see Windows Media Player, which is what I was probably accessing the last time I was in the machine, so it does appear to have backed up the virtual machine. I would expect it to because it is a part of a Mac application, VMware Fusion.
It appears to be an issue with permissions that I don't know how to solve.
I know there is a VMware forum, but I can't even figure out how to sign up for it the darned thing is so confusing. I can't seem to post to it no matter what I do.
Terri

Unable to install Cisco Jabber Video in Windows 8

When I attempt to install Cisco Jabber Video for TelePresence (version 4.6 and 4.7) in Windows 8, I get the following error message:
The error says: "The wizard was interrupted before Cisco Jabber Video for TelePresence could be completely installed. Your system has not be modified. To complete Installation at another time, please run setup again. Click Finish to exit the wizard."
The error occurs for 4.6 and 4.7. What can be done to resolve this issue?

Hi Robert,
Is Windows 8 on a Surface Tablet or desktop/laptop?
If Tablet, this platform is not supported. No ETA on when a version will be released to support this.
If desktop/laptop, then you need to update your video driver by visiting the website of the manufacturer, i.e. Intel, nVidia, ATI, etc. The latest video driver cannot be obtained by using the Microsoft update tool. These drivers are usually generic and/or not the latest.
Once installed, this error should go away.
If installed and you still get the error, then this means your video card is unsupported and you will not be able to use this software.
Jason

Having trouble accessing photos

Ever since updating my 4s to the ios7, I am having trouble accessing my photos when using apps such as Facebook, text messaging, and Google hangouts. It says that the app cannot access my photos and to change my setting in privacy settings. When I go to the privacy settings and click on photos I get a message saying that if an app wants to access my photos it will be listed and I can change the setting, however none of the apps are ever listed. How do I change my setting so I can upload pictures that I have already taken on my phone?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
This is not necessarily a permissions issue, but could also be a corrupt library.
To repair permissions in the iPhoto Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. You'll see the option to check and repair Library permissions.
If that doesn't help, what version of iphoto do you have? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Webcam Video pauses when recording sound from microphone

I have a strange problem which i am encountering when recording and playing back webcam video.
I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
I am using AS 3.0, FMS 3.5 and flash CS 5.5
When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
I tried using the flvplayback component and even their it pauses.
Any help is appreciated.

Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

Trouble accessing my cisco webcam video in IOS6

Similar Messages

Maybe you are looking for