Trouble adding files with new 7.0

Ever since I downloaded iTunes 7.0 and the updated 7.01 and I try to add files to my iTunes library from my hard drive it will only allow me to add up to 5 files which is a real pain in the neck. If I am adding a new cd I have to keep going back to "add file to library" and repeating the steps. I never had this problem until the recent update of iTunes. I could add 100 files and they would all make it to my iTunes library. Any ideas?
Homemade   Windows XP  
Homemade   Windows XP  

No, my hard drive is not full. I am not an idiot. I am far from full. That is not the problem anyway, if you read my post. I do not use iTunes to upload my cds. I use another program because I don't like the way iTunes does it. I add the files from my hard drive to iTunes using "add new files to library" from the file menu. However it will only allow me to add 5 at a time. Very annoying. From the sounds of things they really screwed up with this new 7.0 version. They will never get another dime of my money since my iPod gets a sad face often, won't play, and the only advice I got was "well, you will have to buy a new one, we have a new one coming out in September." Thanks Apple, for making crap products that need to be replaced every 15 months.

Similar Messages

  • Having trouble accessing internet with new wireless WRT54...

    Having trouble accessing internet with new wireless WRT54G. Used easylink to read existing router BEFSR41 which works great to westell modem provided by Verizon. When connect new router Easylink configures WRT54G but when trying to connect to internet...fails. All lites indicate good. Not using wireless device yet, just the wired ethernet. Router set up as DHCP.
    I keep going back to old router and works great every time. Help! 

    Thanks for response, however I tried setting unit to 192.168.2.1 (leaving DHCP) to no avail. I put my old unit (BEFSR41) back in and I'm back up. I need to sit back and decide which way to go on this. Perhaps it's defective and I should return it.

  • Saving File with new file name

    I am subclassing JFileChooser and implementing ActionListener for being able to save and open files.
    I am using different file extensions (.ac and .ps), and when saving, I first check that the file name has the right extension.
    If it doesn't, I add the right extension.
    But for some reason it doesn't show my saved new file, even though in the debugger it goes through all the code of saving.
    Here is the main portion of my code before the code of saving (adaptee is my JFileChooser):
    File ananyaFile = adaptee.getSelectedFile();
    String name = ananyaFile.getName();
    int l = name.length();
    if (!(l >= 4 && name.charAt(l - 3) == '.' &&
    ((adaptee.getFileFilter() == adaptee.acExtensionFilter &&
    name.charAt(l - 2) == 'a' && name.charAt(l - 1) == 'c') ||
    (adaptee.getFileFilter() == adaptee.psExtensionFilter &&
    name.charAt(l - 2) == 'p' && name.charAt(l - 1) == 's'))))
    if (adaptee.getFileFilter() == adaptee.acExtensionFilter)
    name = name + ".ac";
    ananyaFile = new File(name);
    adaptee.setSelectedFile(ananyaFile);
    else if (adaptee.getFileFilter() == adaptee.psExtensionFilter)
    name = name + ".ps";
    ananyaFile = new File(name);
    adaptee.setSelectedFile(ananyaFile);
    Why does it not show my saved new file? Do I have to set it somewhere else?
    Thanks for your time!

    Ok, I put the code which adds the extension
    File ananyaFile = this.getSelectedFile();
    if (ananyaFile == null)
       return;
    String name = ananyaFile.getName();
    int l = name.length();
    if (!(l >= 4 && name.charAt(l - 3) == '.'  &&
       name.charAt(l - 2) == 'a' && name.charAt(l - 1) == 'c')  
       name = name + ".ac";
       ananyaFile = new File(name);
       this.setSelectedFile(ananyaFile);
    }into the approveSelection method of my subclass of JFileChooser.
    If someone wants to open a file without writing the extension and the file with the extension (which was added in my code) exists, it does get opened.
    Also, if someone wants to save a file without writing the extension and the file with the extension (which was added in my code) exists, it does ask if you want to replace the file (as I have programmed).
    But if you say yes, or if you want to save a file without the extension that doesn't yet exists (with the extension), it doesn't save it.
    However, saving works fine if someone writes the full file name into the File name box.
    Well, I would like to allow the user not to write the extension not only for opening a file, but also for saving a file.
    Please help! I am getting pretty desperate! Thanks!

  • Viewing a pdf file with new and new content

    Hello folks,
    Assume that one creates a pdf and uses Preview or Reader to view it.
    Then adds something to the picture and opens the file again: new content, old filename.
    One would like to see one of the following schemes:
    a) Open would close the old window and present the new content in a new
    window.
    b) Open would keep the old window and create a new window for new content.
    What happens is:
    c) Open says: "I've already displayed a file with this name, I don't need to do a thing."
    Is there a way to force behaviour a) or b) ?
    Thanks,
    Miklos

    If the mountain does not come to Muhammad, then Muhammad goes to the mountain.
    On this basis I wrote a short perl script that increments a number, and constructs a new
    filename from the original filename and the incremented number.
    Then it copies the original file to the new name and runs Reader or Preview on the new file.
    Now I can see as many versions together as I like.
    Miklos

  • Merge Illustrator cs4 file with new document

    Hi all,
    I recently got an 'unknown error has occured' with a file I have been working on in Illustrator CS4.  I remember there was a way where you could open a new Illustrator document and drag the file with the error into the new document, but from there I do not know how to merge this in where we can get back the layers and objects from the file with the error unto the new file.  Does anyone have some instructions on how to merge the document in?  Thanks in advance.
    pwitman

    Hi,
    I tried saving the file into a PDF after opening it up in Acrobat, but I got this error when trying to save "The document could not be saved.  There was a problem reading this document (109)."  But when I drag the file into a opened new document in Illustrator cs4, it would load up, however I don't know the steps to merge or group the objects and layers back into the new document.  Could anyone provide me the steps on how to do this?  Thanks.
    pwitman

  • I still can't open files withis new upgrade this new adobe dc app. what gives????

    I have not re ieved any feed back on how to open the files with this new upgrade. I need help!

    Hi,
    Would you tell us which app you have?  Acrobat DC for iOS or Android?
    Can you also make sure that you have the latest version of the app?
    For iOS, the latest version (as of April 28, 2015) is 15.0.2.
    For Android, the latest version (as of April 28, 2015) is 15.0.1.
    If you are looking for the files that are locally stored on your device, please select "Local".
    Please let us know if you need additional information.

  • Updating a file with new input

    Hi. How would I be able to read in a file, and than update that same file with input from the user? Example: I have a file named 'Num' with the numbers '1','2', and '3' in it. How could I read those three numbers in, and than update it the file with something the user puts in, like '4'? Thanks.

    import java.io.*;
    public class ReadAndUpdateFile
      public static void main(String args())
        throws Exception
        new ReadAndUpdateFile(args(0));
      } // main
      public ReadAndUpdateFile(String file)
         throws FileNotFoundException, IOException
        String line = null;
        BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream(file)));
        while ((line = br.readLine()) != null)
          System.out.println(line);  // dump each line
        br.close();
        System.out.println("Enter your number:");
        br = new BufferedReader(new InputStreamReader(System.in));
        line = br.readLine(); // Get User Input
        boolean append = true;  // True means that it will append to the file
                                // if it exists and create it if it doesn't
                                // set to false it will overwrite it with a new file
        FileOutputStream fos = new FileOutputStream(file, append);
        fos.write(line.getBytes());
        fos.flush();
        fos.close();
      } // ReadAndUpdateFile
    } // ReadAndUpdateFileOK... this gives you a VERY good idea... read the javadocs to understand it
    PS I didn't compile it... so it may not compile.. but it is VERY close...

  • Save NI report generator files with new names

    I was trying to save labview library files under new names so that I could adapt the code but the 'Save As' option is greyed out. In certain cases, when I try to copy and paste the code, I get broken wires and cannot get the VI's to work.
    I have been using the report generator toolkit which is quite limited. I was trying to delete a row from an spreasheet but there is no function to do this. So, one workaround that was suggested to me was to use the 'Excel Insert Cells' VI and change the code to instruct it to 'clear' cells rather than 'insert' them. This works, but I wanted to save a copy of the amended file under a different name so that it was independent of the installed library files but I can't seem to do this. I tried to copy out the code but got broken wires even though I have been able to do this in other instances.
    Any suggestions?
    Thanks,
    Will

    Hi Will,
    I had the same problem with a project and found the following workaround:
    To ensure the original function of any library VI, it's not recommended to just change the VI to do something else.
    Therefore I expanded the VI to do both, the original functionality and the special function I needed.
    I made an extra Input to the VI, which is a boolean Input.
    With that extra optional Input I can now choose the function I want to do.
    I made the "False" case to be default. This case works like the original function.
    The "True" case is built to do my special function.
    This workaround is quite easy and not dangerous. For all projects, which would use the function in their normal use case it's working just as if the file was unchanged.
    And for projects using special functionality I can add a "True" constant to my VI Input and the function works as I want..
    Hope this workaround helps to fix your problem!
    Kind regards
    adigator

  • Can't load mwp file with new (10.1.4) workbench

    does anyone have an idea about why i am getting this error?
    all mwp files open fine in 10.1.3.
    i can't open any mwp file with this new version and it seems unlikely that they are all corrupt.
    all i have done is change the oracle and jaav home env variables in the set env file.
    the workbench opens fine, can open sessions.xml files but cannot open mwp files.
    thanks a lot in advance for any suggestions or help
    paul
    oracle.toplink.workbench.framework.OpenException: Exception [TOPLINK-43] (Oracle TopLink - 10g release 2 (10.1.3.0.0DP4) (Build 050715)): oracle.toplink.exceptions.DescriptorException
    Exception Description: Missing class for indicator field value [relational] of type [class java.lang.String].
    Descriptor: XMLDescriptor(oracle.toplink.workbench.mappingsmodel.query.MWAbstractQuery --> [])
         at oracle.toplink.workbench.mappingsplugin.MappingsPlugin.open(MappingsPlugin.java:297)
         at oracle.toplink.workbench.framework.internal.FrameworkApplication.open(FrameworkApplication.java:653)
         at oracle.toplink.workbench.framework.internal.FrameworkNodeManager.openCallback(FrameworkNodeManager.java:339)
         at oracle.toplink.workbench.framework.internal.RunnableProjectLoader.run2(RunnableProjectLoader.java:75)
         at oracle.toplink.workbench.framework.internal.RunnableProjectLoader.run(RunnableProjectLoader.java:62)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: Exception [TOPLINK-43] (Oracle TopLink - 10g release 2 (10.1.3.0.0DP4) (Build 050715)): oracle.toplink.exceptions.DescriptorException
    Exception Description: Missing class for indicator field value [relational] of type [class java.lang.String].
    Descriptor: XMLDescriptor(oracle.toplink.workbench.mappingsmodel.query.MWAbstractQuery --> [])
         at oracle.toplink.exceptions.DescriptorException.missingClassForIndicatorFieldValue(DescriptorException.java:878)
         at oracle.toplink.internal.ox.QNameInheritancePolicy.classFromRow(QNameInheritancePolicy.java:107)
         at oracle.toplink.mappings.foundation.AbstractCompositeCollectionMapping.valueFromRow(AbstractCompositeCollectionMapping.java:731)
         at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:996)
         at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.java:241)
         at oracle.toplink.internal.ox.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:128)
         at oracle.toplink.ox.mappings.XMLCompositeObjectMapping.buildCompositeObject(XMLCompositeObjectMapping.java:195)
         at oracle.toplink.mappings.foundation.AbstractCompositeObjectMapping.valueFromRow(AbstractCompositeObjectMapping.java:155)
         at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:996)
         at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.java:241)
         at oracle.toplink.internal.ox.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:128)
         at oracle.toplink.ox.mappings.XMLCompositeObjectMapping.buildCompositeObject(XMLCompositeObjectMapping.java:195)
         at oracle.toplink.mappings.foundation.AbstractCompositeObjectMapping.valueFromRow(AbstractCompositeObjectMapping.java:155)
         at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:996)
         at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.java:241)
         at oracle.toplink.internal.ox.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:128)
         at oracle.toplink.ox.XMLUnmarshaller.xmlToObject(XMLUnmarshaller.java:229)
         at oracle.toplink.ox.XMLUnmarshaller.xmlToObject(XMLUnmarshaller.java:211)
         at oracle.toplink.ox.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:286)
         at oracle.toplink.workbench.mappingsio.ProjectReader.readObject(ProjectReader.java:193)
         at oracle.toplink.workbench.mappingsio.ProjectReader$SubComponentReader.readObject(ProjectReader.java:320)
         at oracle.toplink.workbench.mappingsio.ProjectReader$SubComponentReader.read(ProjectReader.java:300)
         at oracle.toplink.workbench.mappingsio.ProjectReader.readProject(ProjectReader.java:162)
         at oracle.toplink.workbench.mappingsio.ProjectReader.read(ProjectReader.java:89)
         at oracle.toplink.workbench.mappingsio.ProjectIOManager.read(ProjectIOManager.java:53)
         at oracle.toplink.workbench.mappingsio.ProjectIOManager.read(ProjectIOManager.java:49)
         at oracle.toplink.workbench.mappingsplugin.MappingsPlugin.open(MappingsPlugin.java:295)
         ... 5 more

    Paul,
    I assume you are referring to 10.1.3 DP4. The previews are not reverse compatible with previous previews. Unfortunately this means that you will need to re-map any project created in 10.1.3 DP3 or earlier.
    We believe we have finalized the file formats for the release and our intention is to have the DP4 projects be completely compatible with the final release.
    Sorry for the inconvenience,
    Doug

  • Replace files with newer download files on NB100?

    Just got the NB100 for my daughter and we both love it to bits:)
    I'm doing the update and it's found 129 updates and after downloading, it's asking me at various points if I'd like to keep a modified file or replace it with the newer downloaded file.
    What do I do?
    Homey

    I just went ahead and replace everything with newer versions and everything worked apart from the sound. two lines of typing at the terminal screen fixed this and everything now works!
    Hope this is of help to anyone who's bought oneof these babies!
    Homey
    Still learning...

  • Mac InDesign CS6 crashes when adding files with links to Windows network into book

    Our Mac network is unstable, so I tested linking InDesign CS6 files (on my Mac's hard drive) to .jpg files on our company's very stable Windows network rather to the same .jpg files on our Mac network. I tested with 4 simple, small InDesign files. When these 4 files were linked to images on a storage drive on our Mac network, I could drag all 4 files into a book and export the book to PDF. But when linked to the same images on the Windows network, while each file would open fine with no errors, and while I could generate a PDF from each individual file, the moment I dragged the 4 files into a book, InDesign crashed, generating pages of information in the crash report form.
    I have no problem making 500 page manuals on my hard drive, comprised of about 50 InDesign files, with links to THOUSANDS of image files on a storage drive on our Mac network. Is there some trick to making a book with files linked to images on a Windows network? If there is no simple answer, who could I call to set us up so this will work?
    I'm using InDesign CS6 for Mac, totally updated, version 8.0.1.
    Thank you so much!!!

    It seems, this is all you need to do... your message isn't clear as to whether you've fixed your issue or not.
    [Extract from link above]...
    "Add the network share(s) to your Favorites in Bridge and drag assets into your layouts from Bridge or Mini-Bridge. The paths stored in the InDesign links will be full network paths, and both sets of machines should have no problem finding them. This is the more usual InDesign workflow."

  • I am having trouble opening files with a psa extension. These files come from space planning software and I was told that Photoshop elements would be able to open files with a pas extension. Does anyone have any advise?

    Does anyone know why I am unable to open psa files with elements 13. I read on the internet that elements was the software that I needed. However, it does not work. The files are coming from space planning software.

    In older versions of Elements PSA files were associated with Photoshop Album which has now been replaced by the Organizer. Elements has no 3d functionality for supporting space planning files but these files can normally be exported or saved by the originator as a bitmap or pdf file. Those could then be opened in PSE. I suggest you explore the possibilities of file conversion with your original source.

  • Having Trouble adding HREFTrack to new video

    Hi! I am trying to add a HREFTrack to a quicktime movie and it is not working!
    The file I am trying to add is formatted like this:
    {QTtext}{font:Geneva}{plain}{size:12}{textColor: 65535, 65535, 65535}{backColor: 0, 0, 0}{justify:center}{timeScale:30}{width:160}{height:48}{timeStamps:absolute}{lan guage:0}{textEncoding:0}
    [00:00:00.00]
    A<http://google.com>
    [00:00:04.15]
    I have it listed as HREFTrack and not enabled in the properties window. I have even downloaded other videos with working HREFTracks and they do not work when I edit them. I do not want my HREFTrack to have a target-- I would like it to refresh the window I am currently in. I have tried to get this working in Firefox 2.0.017 and Safari 3.0.4, neither with any luck. The working videos I have downloaded were tried in the same browsers.
    I have been creating my HREFTrack by pasting the text for the link into my movie at the point I want it to start, then exporting the text as text, re-opening it in QuickTime Pro to make necessary edits, and pasting it back into the correct location in the movie. Then I save the movie as a self-contained movie. The HREFTrack does not work in Quicktime standalone, or in either browser that I mentioned.
    I am having a similar problem adding text links-- although the text links work fine in the QuickTime player standalone version, but not in either browser.
    I am using TextEdit to edit the files, but I have also tried WordWrangler, with identical results.
    Can anyone tell me what I am doing wrong? Thank you!

    Come on, guys! Someone must know the answer to this!? Or at least where might be a better place to seek assistance? Anyone? Bueller?

  • How do I save excel file with new name?

    Returning to using a Mac after 20 years - so not familiar with many things.
    I have an existing Excel file that I am using and making changes to... how do I save it as a new file name?
    I click on the 'disk' icon on the top ribbon but that just saves it as the same file-name with an updated time-stamp... that won't work for me.
    Much appreciate any help!

    Top of screen: FILE -- Save as... Name it - top rectangle and pick a place to save it. DONE.

  • Trouble adding comments in new pdf

    Just upgraded from Acrobat 8 to 9 PRO.
    Frequently, when I create a new pdf (scanned document into computer or "print" photo to a pdf), I am unable to get the commenting tool bar to allow me to add commnets.
    This apparently is because the file is protected?
    But, if I have created the pdf, how do I remove that protection to allow commenting (arrows, boxes, text boxes, etc.)

    Our scanner is Panasonic DP-3010 multi-function machine - high capacity in an office environment.,
    My desktop software is set up to automatically save the scanned file as a pdf named by the day's date.
    I then open the file and resave it with a name that is appropriate.
    If I print a jpg, I open the photo in windows explorer (XP Pro SP3)/ opens Windows Picture and Fax Viewer,  and then "print" choosing "Adobe PDF" from the drop down list of available printers.
    All of this is just as in Adobe 8.
    I print to adobe and the window pops up with the pdf.  However, the commenting toolbar is not available.  That is the major difficulty that was never an issue with Adobe 7 or 8 but is now my stopping point with 9.  Arggh.
    Tim LaLonde
    Haskin Electric, Inc.
    1948-2008: 60 years strong!.

Maybe you are looking for