Trouble adding RAM to old board

Hello,
I have an old SI7 MS-5124 with a pentium processor. I currently have 4 x 8MB EDO which I - obviously - wanted to increase. I bought 2 x 32MB EDO and inserted them instead of the four old ones. When I turned on the power the machine refused to boot. It just gave me the "ticker"-sound a couple of times, beeped 4-5 times but remained black. Nothing ever appeared on the screen. I took them in and out, switched them...nothing! Then I re-installed the four 8MB-modules, and everything worked just fine again.
I am completely ignorant when it comes to hard core setup, so could someone please give me an explanation for absolute dummies concerning the possible cause of this problem.
Thank you )
Landers

These old board usually have a DIMM voltage jumper setting (3.3v / 5v).
99% of the sticks use 3.3v so check it out.

Similar Messages

Does adding RAM really help performance?

My iMac 1.8 GHz G5 is about two years old and starting to run slowly. Could it be the 10,000 photos and 6,000 songs? I've started using my MacBook for most work and my iMac for most play (i.e. media).
Does adding RAM really help performance? I've only got one 512 MB chip.
Thanks for any help.

Hello,
Yes, adding more memory can make a huge performance improvement.
I've owned two iMac G5 systems. And, in both cases, I noticed a huge performance improvement jumping to 1 GB of RAM. And, while not huge, I noticed even better performance going from 1 GB to 2 GB of RAM.
512 MB is minimal, and adequate. But, more memory makes OS X run considerably better.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Adding RAM to 1.6 GHz G5

I just finished a rather strange process of adding RAM to my G5 which I thought I would share, in case it helps others:
First of all, I have a 1.6 GHz CPU machine, which has 4 DIMM slots. According to the Setup Guide, since there are only 4 slots (not 8), you need to use 333 MHz, PC2700 DIMMs (not 400 MHz, PC3200 DIMMs).
When I first got my G5, it came with 256 MB of RAM (2 x 128 MB 333 MHz, PC2700). About a year ago, I added 512 MB (2 x 256 MB 333 MHz, PC2700), bringing the total up to 768 MB. This addition went smoothly, without any problems.
Recently, I decided to replace the original 256 MB of RAM, with two more 256 MB modules, bringing the total up to 1.5 GB, so I ordered "1 GB DDR400 PC3200 2x512 DIMMS" (Part # M9653G/A) directly from Apple. Note that the RAM Apple currently sells is 400 MHz, PC3200, not 333 MHz, PC2700. In fact, before placing the order online, I called Apple to ask about this, and the person I talked to assured me that this would not be a problem, and that my 1.6 GHz would work with the 400 MHz, PC3200, despite what the manual says, so I ordered them.
Upon receipt, I removed the original pieces, installed the new ones, and my G5 would not acknowledge their presence. It said I only had 512 MB. I called Apple to report the problem, and they suspected it was simply faulty RAM, so they sent replacements. When I got them, I installed them, and got the same results. I called Apple to tell them it still wasn't working, and they had no idea why. Once again, I pointed out that they were sending me 400 MHz, PC3200, not 333 MHz, PC2700, and they still insisted that this was not the problem, but I started to suspect even more that it was, especially after trying to upgrade twice.
In order to test this theory, I ordered RAM from MacMall. This time I ordered 1 GB, in the form of 2 x 512 MB, 333 MHz, PC2700 (made by Kingston, Manufacturer Part No. KTA-G5333/1G). When I received these, I moved the original replacement RAM up into the top two slots, where the original ones were, and placed the two new ones in the bottom two slots. When I tried to turn the computer back on, it wouldn't. The light on the front would flash once, then pause, then flash once again, then pause, etc. When I checked the manual's troubleshooting section, it described what two, three, four, and 5 or 6 flashes meant, but not one. URGH!
At this point, I had no idea what was wrong, so I took my G5 to my local Apple store to ask them. The guy there had the idea of putting one of the original replacement RAM in one of the two top slots, and one of the new replacement RAM in the other top slot. Then he put one of the original ones in one of the two bottom slots, and one of the new ones in the other bottom slot. Believe it or not, not only did the computer turn back on, but it also recognized the new total of 1.5 GB of RAM!!!
This was such a strange process that I thought I would share it, in case someone is also currently going through this process, or wants to in the future.
Hope this helps, and I also hope I've made it clear exactly what happened. If anything isn't clear, please let me know, and I'll try again.
Trent
Power Mac G5 Mac OS X (10.4.4)

PC3200 is fine for that system. The problem was that you were installing the RAM in the wrong slots.
The RAM must be installed in matched pairs, one in the top, one in the bottom, working out from the middlemost pair.
Viewed from the side
======== Slot J14
======== Slot J12
======== Slot J11
======== Slot J13
So, one pair of identical parts goes in J11/J12, and another pair goes in J13/J14. Doesn't matter if the bigger pair is first or second.
This wasn't in the manual for your Mac?
Quad G5 2.5Ghz 4.5GB 2x250G, PB 15" 1.5Ghz,80G,1.5G Mac OS X (10.4.4)

Issue After Rating field is added to the Discussion Board List in SharePoint 2013

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Please help on this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID,
String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress,
Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +2336
Ashish Kumar Baranwal

I have found that my Mac Book Pro 15 inch late 2011 is slower than my PC Windows 7 for certain downloads, and working with iPhoto. Would adding RAM be helpful in speeding up this process. Currently I have the stock 4GB RAM, and storage 500GB HD drive.

I have found that my Mac Book Pro late 2011 15 inch is slower than I expected with certain downloads, or working with iPhoto than expected compared to my previous Windows 7 PC. Would adding RAM be of any value in speeding up the process?

how to tell if your mac needs more ram

My iTunes won't open. I recently added RAM to my computer. Other than that, nothing is different. Help!

My iTunes won't open. I recently added RAM to my computer. Other than that, nothing is different. Help!

Hello Kcook2484
Download iTunes again and install it again to troubleshooting
iTunes 11.1.2
http://support.apple.com/kb/dl1614
Regards,
-Norm G.

New Zen trouble adding a memory card (not seen)?

0New Zen trouble adding a memory card (not seen)?8I have a new zen 4gb unit and love it, saw it has a memory card slot so i stuck an 8gb sdhc sandisk 3 extreme memory card in there, figured I could dump more fun stuff in there on it but when i use the zen explorer i don't see that card.
I formatted the sdhc card in fat 32 and named it sd4zen yet when its in the zen and i check my computer I am not seeing the card in the windows menus to drag stuff over onto for the zen nor is it showing in any of the zen media explorer areas.
Do i need to dump stuff onto the memory card externally (thru a card reader first) then insert it and access that thru the memory part of the zen menu, or are the zens not able to read from an sdhc sd card or is 8 gb too big (compatability)?
Thanks for any help on this,
Bill

I am a dork, a few mins messing with it i realized in the main menu of the zen with the card inserted hit removable disk and hook up via usb, now my computer sees the sd4zen dri've and i can dump more fun stuff for zen on there...
Sorry to take up space maybe someone will read this and help them with the same issue i was having or mods if you choose just delete.
Bill

Trouble adding comments using Reader X from enabled comments in Acrobat 9

I am a Technical Writer with Acrobat 9. Regularly I make my documents comment enabled for reader. IT has been updating systems and some of my recipients now have Reader X. Because of the difficulty they have, when they open the commentable PDF they are having trouble adding comments and wind up printing the document, marking up the hard copy, scanning it and emailing it back. What am I doing wrong? Is Reader X not downward compatible? We want to move forward with technology, not backwards.

Right click the document opened in Reader X and then click "Select Tool".
Hope that helps.
Thanks,
Abhilasha

Some thoughts on adding ram to G4 sawtooth

I've gone down the list and read all I can about adding ram to my G4. It now has 2-64mb pc-100's, 1-256mb pc-100,and 1-128mb pc133-333. I would like to max it out since it's been freezing up during graphic work when I have more than one Adobe application running. Am I correct in thinking that's the problem or could there be something else going on? I have already expanded with a 1ghz processor, and 120gig hard drive. I'm running Panther. Any suggestions? Also I read somewhere that it matters what slot you put each ram chip in. Is there some order to this?
powermac G4 (agp graphics),Powerbook Titanium OSX Mac OS X (10.3.9)

Claire, In the Finder under the Apple/About this Mac/More Info/Memory you will see the Memory Slot order of each stick follow by their size. Take a look here she is replacing memory in the first slot, also the size should be printed on the side each stick.
http://www.info.apple.com/usen/cip/html/g4ge/g4gbenet-memory-cip.mov.html
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9)

HT4623 I have updated to ios7 and am having trouble adding appointments to my calendars??

I am having trouble adding appointments to my various calendars. No probems before ios7 update. What am I doing wrong??

iPhone 3G IOS 4.2.1 is the latest & greatest. There's no more updates for this iPhone.
You have to buy a new iPhone since most apps target IOS 6 & IOS 7.

Does adding RAM help solve iMovie4 jerky playback

I have been reading threads about jerky playback in iMovie4 in large projects, after adding music from iTunes etc. My wife has a monster project and playback during editing has became very eratic. I have emptied cache, repaired the hard drive, repaired permissions etc. I have not tossed iMovie preferences. I have 23 gigs of space on the HD and a 250gig external FW HD that I bought after she started the project on the internal HD. I would like to know from you experts: 1. Would it help to move the project to the larger external HD? 2. Would adding RAM help (currently iMac G5 1.8mhz with 768 megs RAM)? 3. Is there any way to tell if the project will export to iDVD smoothly if it continues to look terrible in iMovie playback? I hate to go through a few hours of rendering for nothing. Thanks so much for your help. I always find good and useful info in discussions.
Mike Ryan

Michael, there are some very useful applications that I highly recommend to keep your Mac running smoothly. As a defragmenter I use Allsoft's Disk Warrior that also has a very good directory repair feature. Check out also Drive Genius that has a host of useful features. Also get iMovie file fixers, invaluable tool that is free that will allow iMovie to import certain files in audio and photo formats that are greyed out and also has other features. I believe I got mine from Mr. Lennart Thelander in previous posts here. Cache Out is an excellent application to clear out cache files. I also advise you do a regular permission repair from Disk Utility in your Utilities folder that is on your Mac. These are basically my must have applications. As for copying your iMovie project to your external, just drag your entire project folder ( the blue one with the media and star folder(s) in it directly in the external hard drive. I find that iMovie is one application that requires a clean (defragmented) drive with ample space to spare. I defrag my drives if I trash files often from them, or if I notice erratic and jerky performance or slowness in response. I hope that some of my suggestions will help your in your editing.

Having trouble adding purchased and imported music to my playlists

I'm having trouble adding purchased and imported music to my play lists. For example when I purchase or import new music to my playlists I have to re sync my ipod or the new songs don't appear on my playlists. Perhaps this is because I once unplugged my ipod w/out first disconnecting it. Previously when I purchased and imported music songs would appear on my play lists when I dragged them from purchased to playlist.

Remember to authorise your new machine with the Apple ID
Essentially copy the itunes folder and all sub folders over to the same place in the new computer.
Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: C:\Users\username\Music\iTunes\
Windows 7: C:\Users\username\My Music\iTunes\
Windows 8: C:\Users\username\My Music\iTunes\

Trouble adding Audiobooks in iTunes 12.1.2.27 with OSX Yosemite 10.10.3

Hello, I am having Trouble adding Audiobooks in iTunes 12.1.2.27 with OSX Yosemite 10.10.3, I downloaded 4 Audiobooks from Audible, Synced my iPod but the new Audiobooks do not show up in either the Audiobooks or Music section of my iPod after I sync my iPod, I do see them in the Audio section of iTunes but not on my iPod, any help would be greatly appreciated. thank you Michael

Hello, I am having Trouble adding Audiobooks in iTunes 12.1.2.27 with OSX Yosemite 10.10.3, I downloaded 4 Audiobooks from Audible, Synced my iPod but the new Audiobooks do not show up in either the Audiobooks or Music section of my iPod after I sync my iPod, I do see them in the Audio section of iTunes but not on my iPod, any help would be greatly appreciated. thank you Michael

Adding RAM for Oracle 9i

Hi,
I have an oracle database 9iR2 installed in my server (32 bits processor, 4GB ram). And I want to add more RAM for oracle database. It is possible? and do I need to do any setting for the previous oracle instance to fit the newly added RAM (Swap space)?
Thank you.
~ vincent.

Hello,
yes, you can add more RAM without any problem. Take into account that if the O.S. it's windows 32b. , it will only see 3,3 GB (unless using PAE). Linux OS has no problem with that.
You don't have to make any previous settings or changes in the database. Just add RAM. After you've added the RAM, the database just will continue using the same amount as before. You'll have to change this modifying all the memory related parameters (SGA, ...)
Regards

Im having trouble connecting to my old HP 5MP on small network

Im having trouble connecting to my old (but still a great printer) HP 5MP which is connected (be causes it has no ethernet built in) via an Ansante eternet/localtalk bridge to the ethernet network and ti my old G4 Power PC Quicksilver (using 10.4.11). That is shared both by ethernet and (via my vodafone wireless router to my 21" iMac Macbook Pro. When I bought my new iMac and MBP I kept my old G4 so I could still use by SCSI Scanmaker E3+ scanner and my non-USB, non ethernet printer by sharing it from the G4. Worked OK but now not so over either wi-fi or ethernet. I just updated to Lion on the iMac and am on Snow Leopard on the MBP and they say they can't find suitable drivers. My work around has been to print to "Mail pdf" to myself and pick it up on the G4 and print from there direct to the 5MP. But now I can't even connect to the 5MP from there since downloading a software update which was something about enhancements to Airport.
Have tried resetting tie printing system, repairing disc permissions and rebuilding the drive using diskwarrior on t he G4 but now I can't get any mac to see and add the 5MP. My old Epson Photo stylus 1200 works OK on USB but I need my 5MP tp work. Can you help on that please?

Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last.

Trouble adding RAM to old board

Similar Messages

Maybe you are looking for