Trouble after Upgraded ipad to ios6

Upgraded ipad to ios6 but unable to locate my 3G carrier

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

Similar Messages

Has Anyone Had Good Luck After Upgrading iPad 1 To iOS5e Experiences With iPad 1

Guessing, but posts here seem 20:1 negative after upgrading iPad 1 to iOS5.
Most common is huge slowdown in response and crashing.
I'm a typical user in that I rarely post if not having trouble, so I suspect there are many iPad 1 users that have upgraded to iOS5 and have not noticed any significant hit in performance.
I'd like to hear from you folks that are happy.
Due to all the negative posts I'm holding up on upgrading my iPad 1 3G 64GB as my understanding is that there is no going back to iOS 4.3 after the upgrade to iOS5.
Should I upgrade or wait for an update?

iPad1, 64GB, 3G. I updated to iOS5 a couple of days after it was released (servers were too slow to connect on the first day. ) I had only one crash, and that was my fault. (Moved Newsstand to a folder, which is not supported.) Otherwise, all is fine. As others have noted, on the iPad1, it's a bit slower, but nothing that's a dealbreaker IMHO.
The most difficult thing has been the amount of updates to the apps. Nearly every app I have had an update for iOS5 so it was like I was seeing 3-5 new updates every day. But I've kept with the updates and I think that has helped with my lack of crashes/lockups.
My only real complaint is with the way the iPod app changed to the Music app and how it now treats podcasts. (The "previously played" indicator is now missing.) And a few minor gripes like not having location based reminders (iPhone only feature. ) But otherwise, I'm reasonably satisfied with the update on my device.
If I had to make a recommendation, I'd be on the fence. If there is a "must have" feature you want (e.g.: Airport configuration utility, Messages, Twitter integration,) then go ahead an update. Otherwise, not updating now is probably not going to inconvinience you. Eventually, there may be "iOS5 only" apps but by then, you'll probably be ready for a new iPad.

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

After upgrading ipad to iOS 7.1 I can no longer close open apps by double clicking home button. Any other way to close open apps?

After upgrading ipad to iOS 7.1 I can no longer close open apps by double clicking home button. Any ideas

Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

Mail is giving me trouble after upgrading to OS X 10.10

Mail is giving me trouble after upgrading to yosemite. I am unable to enter settings and change email settings. Can someone please help.

I have had the same issue (and I've seen many posters on here mention this, as well). I have an external FireWire drive that, since upgrading to 10.4.9 is not recognized by my G4 PowerBook. It worked fine before the update. Some have said the issue may have occurred if the drive was connected to the computer at the time of the upgrade but mine was not. I'm patiently waiting Apple to fix this and many other apparent flaws with the latest so-called "upgrade."
P.S. I have never had any issues with previous OSX updates and have been a Mac user for 3+ years.

After upgrading iPad to iOS8, cannot sign in to iCloud. Password it not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

After upgrading iPad to iOS8, iPad cannot sign in to iCloud. Password is not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699

Big trouble after upgrade 10.10 and 4.0: No sync Calendar and Contacts between devices and users

Hello,
it is a big trouble after upgrade 10.10. an 4.0 (i paid 18 € again!):
After the update no sync between devices an user for calendar and contacts possible. Asking a password?
No device manger started. Error code -1!; Open Directory Service no started.
Help?

I ended up exporting all the outlook data to CSV, creating a new PST and reimporting the data. Calendar sync now works, but I sure do hope I don't have to redo this every week.

My mac wifi connection to DSL line was down when I tried to upgrade Ipad to IOS6, and it defaulted to Ipad data line and consumed my monthly allotment of data -- How can that happen as a technical matter?

Maps did not work for me for the first week after upgrading to IOS6 on my New Ipad -- I have since learned that I exceeded my 2 gig monthly data plan and therefore I had no 4G access on my ipad, which meant Maps couldn't work while traveling. Since I never download videos, I knew I had not knowingly downloaded that much data. When I called AT&T, they told me that when I upgraded to IOS6 I consumed over 1 gig of data.
I did the upgrade while connected to my iMac, which in turn has a wireless connection to router connected to my home DSL line.   My wifi service has been spotty lately, possibly because router is defective. So let's assume that when I tried to download IOS6 that my iMac did not have a good wifi connection. Is the AT&T person correct that the download defaults to the Ipad's 4G cellular network, even though the iPad is connected to the iMac by USB cable? I didn't think that was possible as a technical matter -- i.e., that the iMac gets automatic access to the iPad's connection to the cellular network. (I'm sure I'm not explaining this right, I'm obviously not technical.)
Also, do you get any obvious warning or indicator on the device that you have exceeded your data limit for the month? I sure didn't see any warning, (although I now know that I can go to Settings, then Cellular Data, then View Account and find the status of my data line account).
Thanks for any help on this.

Strange. It works fine with my setup which is no different from yours. Problem with the cable or LAN port(s)?

Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
When the iPad finished resetting I got a popup message on the lock screen saying:
"This Accessory is Not Supported by iPad"
The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
The "TV Out" menu item is not there at all.
I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
This thread is talking about sort of similar issue (although it is about the VGA adapter):
https://discussions.apple.com/thread/2413622?start=0&tstart=0

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

Purchased iBook disappeared after upgrading iPad to iOS 8. Unable to re-download.

A student at my school recently lost an iBook after upgrading his iPad to iOS 8. After the upgrade, the book was just no longer on his bookshelf. Now, when trying to re-download from his Purchased list, the book just appears grayed out and does not download. He can download the book on his iPhone, which is iOS 7. We've tried: closing/re-opening iBooks, signing out/in of his Apple ID, Home button-Power button resetting the iPad, signing out of iTunes, checking storage despite not getting any errors (has 3GB available, book is under 10MB). No luck with any of that.. just a grayed out book that won't download. Does anyone have any suggestions? Thanks

Thank you SO much Stephaniefromlancaster -
I tried your solution and you're not nuts It worked!!!

After upgrading ipad to ios7.1.2, keep prompting to restore ipad

i have upgraded my ipad from ios4.3.3 to ios7.1.2.
After upgrading, i have to setup my ipad and was stuck at restore. It kept prompting me to restore my ipad but it did not work.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

C1000A CenturyLink modems freezing after upgrading iPad Air and 5S to 8.0

I have discovered that after upgrading to 8.0, my C1000A modem stops working when I connect with my 5S and iPad Air. I thought my modem was going bad, but when I went to my mother's house the same thing happened. There is something different with 8.0 that is causing the C1000A modems to stop working. Has anyone else ran into this issue? I would hate to go somewhere and shut down the WiFi at Culver's for instance because 8.0 has some sort of weird bug.

It looks like Apple has a another bug to squash. It appears the issue with locking up my C1000A has to due with IPV6. I hit the reset button on my modem and IPV6 was turned off. I turned IPV6 back on and while I was testing connectivity with http://test-ipv6.com my modem locked up. I turned off IPV6 and no issues so far.

After upgrading iPad won't even turn on

How do you get it on? After upgrading, and out of town, I am frustrated it won't even work. Why does upgrading destroy them? That is what it seems happens!

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Cannot sign in to iMessage after upgrading iPad to IOS 8.1.2

After upgrading to IOS 8.1.2, I am unable to login to iMessage. I receive an error saying check network connection, however I have a wifi connection and am able to access apple.com. Have tried toggling wifi on/off, no success.

Thank you SO much Stephaniefromlancaster -
I tried your solution and you're not nuts It worked!!!

Upgrade iPad to IOS6

How do I upgrade iPad with IOS5.1.1 to IOS 6 when settings says software is up to date?

Campbell10 wrote:
How do I upgrade iPad with IOS5.1.1 to IOS 6 when settings says software is up to date?
Then yours is an iPad 1
iOS 5.1.1 is as far as it can go.

Trouble after Upgraded ipad to ios6

Similar Messages

Maybe you are looking for