Trouble binding 10.5 Server to 10.6 Open Directory

After a recent power outage one of my 10.5 Servers lost its connection to the OD Master. I am unable to get this system to re-bind to an Open Directory Master (10.6 Server). I had to force un-bind the 10.5 machine (via Directory Utility) because it could not contact the OD Master. After force unbinding the 10.5 Server system I checked Open Directory settings in Server Admin and the role was "Standalone Server".
Steps to reproduce problem:
1) Change role of 10.5 Server to "Connects to a Directory System" and rebooted the system.
2) Launch Directory Utility, click add server and enter the FQDN for my OD Master. SSL option is not checked.
3) Directory Utility tries to communicate with the OD Master for a few moments...displaying "verifying server address", then comes back with the error "there was no response from SERVER. Please check that the address you entered is correct".
(where SERVER = the FQDN for the OD Master)
I Checked that DNS was working and that the system (10.5 Server) could resolve the FQDN of the OD Master. When the above steps did not solve the problem I went to the OD Master and (from Workgroup Manager) deleted the previous entry for the 10.5 Server. This had no effect on the problem. Not sure what to try next?

Hi,
Welcome to the  Discussions
10.5 Server and specifically iChat Server has it's own forum
http://discussions.apple.com/forum.jspa?forumID=1235 (for Export)
10.6 Server has Forum called Collaboration Services for iChat Server (And a few other bits)
The Forums are within Categories.
Technically each is within it's own OS Category but Tiger, Leopard and Snow Leopard are all shown in this "Master Category" here
The reason I am posting these links is that I don't know enough about the Server version of iChat.
The chances are that someone in the 10.6 Server > Collaboration Services forum knows how to Export the list from 10.5 Server and input it in to 10.6 Server.
Hope this helps.
7:53 PM Monday; July 19, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

Mac os x server 3.0.2 open directory master disappear from list

Hi, There is a very funny Mac OS X Server 3.0.2 issue.
After I updated my mac os X server from 3.0.0 to 3.0.2. as my host name is conflict with other Mac mini, I changed X server's Mac mini's host name, computer name and localhost name. When I restart my x server. My defined "Open Directory Master" disappear from my server list.
Actually, I need to change some setting from UI, as it disppeared from UI, I can't do any about it. Is there any way to delete it from command line? or How I can enable it appear again?

As can't find the defined open directory server master, have to delete it from terminal command line as:
sudo slapconfig -destroyldapserver
and then add a new open directory master.

10.6 iCal server using 10.5 Open Directory

Has anyone had any experience with getting a 10.6 server's various collaboration services working with a 10.5 Open Directory? I have the web services working fine, but I'm having trouble getting iCal running correctly. First, 10.5 clients trying to connect to the 10.6 iCal server won't work via Kerberos. The other problem, is when I connect via digest mode (or whatever the unsecure mode is), the iCal clients don't seem to get anything back from the server. I can create events and I see them via the web interface, but events created or edited via the web interface don't get pushed back to the client.
Thanks for any help...

I don't think 10.6 does the enabling stuff the same as 10.5 if I remember correctly. A lot of it is done via the web interface. I know creating a wiki in 10.5 meant creating a group in WG manager and setting it up through that. In 10.6 you go to the wikis part through a browser and hit "Create new wiki". Permissions are setup via the settings page on the wiki.
I'm not sure if the same goes for calendaring because we haven't ever used the iCal server to the full extent but I think it might be a similar change. When you sign into your "my page" on a 10.6 web server, it creates a calendar for you that you can edit via the web interface or iCal. Wikis also have calendars created, but I'm not sure how to get them in iCal.
Hopefully that helps some...

Does mac server 3.2.1 open directory support object class "sambaSamAccount"?

Hi:
I use open directory to be a directory service in mac server 3.2.1, and in client side is a linux os.
I want the user can access data via samba. So i add "objectclass: sambaSamAccount" to user by directory utility,
and i also copy linux samba.schema replace the default samba.schema but always show the error message.
The attribute value could not be used because it does not meet the requirements of the attribute.
What problem with it? I miss do something?
thanks

Just to clarify - this is where i get to and after somehow right-clicking and opening this red-marked folder, the contents are seemingly empty
However I tried drag-dropping the folder to the field where you browse for backup and it found contents as it requested passowrd for archive. I input it but then get this:
And If I want to create one, I get the "Invalid hostname" error and can not continue
What now?

Server 3 / SSL Certificate / Open Directory - Problem!

We've updated from Server 2 to Server 3 / OS X 10.9.
We have an SSL certificate for server from Comodo.
Under Server 2, all worked just fine, with the SSL certificate being used to secure all services (configure via Server app).
Under Server 3, all works just fine, but Open Directory will not accept certificate - so Certificates / Settings in Server 3 app shows "Custom Configuration" for Settings - and on inspecting this it is because Open Directory set to be not secured but everything else is using SSL.
I've tried setting the Open Directory to use the SSL, but when ever I do it simply bounces back to being unsecured.
Does this matter? Presumably it should be possible (as the standard setting appears to try and set Open Directory to use the SSL certificate), but not sure whether trying to fix is simply a fools errand.
Anyone got any clues as to whether to fix or not, and if to fix, how?
Thanks in advance.

Have you check to see that the certificate is indeed "Trusted" by your server?
Above, you stated that they're in the etc/certificates folder, but that doesn't mean that the server likes them. You can create a "Self Signed" Certificate and still have certificates in there. That doesn't mean that anyone else on the planet has to trust them.
Open Keychain Access in your utilities folder. Depending on how you have it configured, you may have to look around to find the certificate in question. It may be under login, or System.
When you select your Certificate, if it's there, does it show as trusted?
Another thing you can check... Often times Certificate authories, use Intermdeiate certificates. Since anyone can sell a certificate, in order to have it trusted, you need to have it signed by someone else. A good example is Godaddy. They sell both SSL and Code signing certificates of all flavours. In order to get them to be trusted, the "Intermediate Certificate" needs to also be installed in the keychain. My Godaddy cert looks to be trusted by Verisign via an intermediate.
Have a look here... https://support.comodo.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid =1182
Not sure if it's directly relevant, but there it is.
The point is, I think you need to verify that your certificate is trusted by your server. OD won't use an untrusted certificate.
--an afterthought-- Anything in the logs?
Open up your server window where you try to select the certificate for OD. Also, in another window open up the terminal. In terminal, type:
tail -f /var/log/system.log
In the server window try to select the certificate and click done. See what the output in terminal says.

Can not join a Windows XP machine to OS X Server 10.5.3 Open Directory

I have setup an OS X Server for testing before we deploy it to the network for production. And I trying to join the Windows XP machine to the Domain which I set up in Server Admin under SMB and I get an error "A domain controller for the domain "DomainName" could not be contacted". I have setup WINS, DCHP and DNS. I ping the OS X Server using the it's Fully qualified domain name and I can see the server under network neighbourhood but I can not login into.

Hi Guys,
Here is more info on my SMB configuration, I still can't join a Windows XP machine to OS X Server 10.5.3 PDC. Hope this configuration helps in anyway.
smb:realm = "GRIDIRON01.OT.GRIDIRONINTERNAL.COM"
smb:logon drive = "H:"
smb:logon path = "\\%N\profiles\%u"
smb:workgroup = "pctopia"
smb:wins support = yes
smb:map to guest = "Never"
smb:enable print services = "yes"
smb:wins server = emptyarray
smb:security = "USER"
smb:server string = "gridiron01"
smb:ntlm auth = "yes"
smb:netbios name = "gridiron01"
smb:max smbd processes = 0
smb:os level = 65
smb:preferred master = yes
smb:add user script = "/usr/bin/opendirectorypdbconfig -c createuseraccount -r %u -n /LDAPv3/127.0.0.1"
smb:lanman auth = "yes"
smb:domain logons = yes
smb:domain master = yes
smb:use spnego = yes
smb:use kerberos keytab = yes
smb:adminCommands:homes = yes
smb:adminCommands:serverRole = "primarydomaincontroller"
smb:adminCommands:ldapRole = "1.1 - hosting a master LDAP directory server\n"
smb:auth methods = "odsam"
smb:dos charset = "CP437"
smb:enable disk services = "yes"
smb:log level = 1
smb:add machine script = "/usr/bin/opendirectorypdbconfig -c createcomputeraccount -r %u -n /LDAPv3/127.0.0.1"

Open Directory or LDAP Problem with 10.5 Client and 10.4 Server

Yesterday, the client-server setup we've been using successfully FOR YEARS decided not to work on a v10.5.8 MacBook Pro client. Did not do anything to the v10.5 client recently (other than to boot it up). Not sure if any software was updated on the server recently (where do I check for this?). Curiously, a v10.4.11 client running on a Mac Pro (tower) continues to work fine/as though nothing's changed. It appears as though the only difference is v10.4 client (working) vs. v10.5 client (not working).
Here is what IS working:
1) Network Home Directories on dedicated drive partition of Mac running OS X Server v10.4.11. AFP, DNS, and Open Directory are all up and running (normally, I think) as shown in Server Admin application.
2) Mac Pro (tower) client running v10.4.11 binds to and authenticates at v10.4.11 server. Any valid user can access their home directory on the server seamlessly when logging in at this v10.4.11 client Mac.
3) That same v10.4.11 client Mac also contains a LOCAL admin user with its home directory on the local hard drive. That LOCAL admin account is used to update software on a per machine basis (and preclude users from adding unauthorized software, needing to use a specific machine, etc.).
Here is what IS NOT working:
4) On a MacBook Pro client running v10.5.8, the LOCAL admin account looses access to the partition containing its local home directory. The drive partition literally disappears. The only "solution" I've been able to find (and it's not truly a solution) is to turn off the Open Directory/LDAP binding (using the Directory Utility application). With binding turned off, the LOCAL admin user has no problem accessing their home directory on the local hard drive partition. Turn binding on again (using Directory Utility application), and the LOCAL admin user can no longer see its local home directory.
Again, binding is necessary to allow regular users to use the v10.5 MacBook Pro with Network Home Directories (as in items 1-3 above). Binding should be turned on for this reason. However, with binding on, the LOCAL admin user cannot manage the computer because the local partition containing the admin home directory disappears/is inaccessible. Turn binding off, and the partition containing the admin home directory reappears.
Perhaps there's something in the sever logs that will help. I don't really know how to read these, so if your help involves the logs, please refer to them explicitly (e.g., "in Server Admin, go to Open Directory->Logs->LDAP log" or similar).
Any help greatly appreceated.

Nope. Never used sso_util.
I try to use Apple's GUI server management tools unless absolutely necessary/at the end of my rope (i.e., last step before re-install etc.). I figure there's just too many things going on under the hood: using the command line may fix one setting, but not re-configure the two or three others that Apple NEEDS in order to have the whole thing working in harmony. Unless you really know what's going on with all the configuration files, it's best to let the GUI manage the settings.
In my particular circumstance, I've now got ALL Leopard clients, one Leopard v10.5 server, and one Tiger v10.4 server. Everything is working fine now, but it was not a simple matter getting the Tiger v10.4 server re-integrated into the otherwise ALL Leopard environment. OD/Kerberos is on the Leopard v10.5 server. Home directories are still on the Tiger v10.4 server.
Two keys to getting THIS/MY set-up working:
1) Tiger v10.4 server needs to have Open Directory set to "Connected to a Directory System" and has to be joined to the Kerberos realm that was set-up on the Leopard v10.5 server (use Server Admin to do all of this).
2) Sharepoint on Tiger v10.4 server has to have SOME, but NOT ALL checkboxes for guest access enables/checked. See:
http://discussions.apple.com/message.jspa?messageID=10903468#10903468
Number 2 immediately above is contrary to what Apple manual for User Management reads, but this is what worked for me/my set up, after pulling my hair out following the manual's instructions to the letter and not getting the thing to work!

10.6 Client and 10.7 Server Open Directory

I´ve got an Mac Mini running Lion Server. It´s configured as an Open Directory Server.
And I´ve got some 10.6 Clients running on the same local network.
All Clients have the Mini Server as DNS Server.
And now I want to use NetworkAccounts form the 10.7 Server on the 10.6 Clients.
I´ve connected the 10.6 Clients to the Server (without SSL) and all Clients say "Network Accounts available".
But if I try to log in on the Client it just shakes the login window. I´ve tried it on all my Clients with different Accounts but nothing worked.
It just won´t work! But why? Can you please help me?
What I´m doing wrong? Or is the combination of 10.6 Clients and 10.7 Server not Supported by OpenDirectory on 10.7 Server ?
Thank you !

Check your authentication against the server from one of the clients using the following command:
dscl /LDAPv3/<server name or IP> authonly <shortname of an account that cannot login>
The server name should be the same name or IP you used when binding your 10.6 client to a 10.7 server.
If you get the response "Failed to authenticate user <shortname> (tDirStatus: -14103)" you are having the same issue I was having. I found an answer to this, but you are not going to like it.
Apparently Workgroup manager and Server.app deal with accounts differently. If you are using Workgroup Manager to import a long list of accounts, don't. Server.app needs to write an addition setting that is not part of Workgroup manager or in Passenger I doesn't work correctly with accounts that have home folders that are not local. Here are the steps I used to resolve the issue:
Export all your accounts and groups
Using Server Admin, demote your OD to a standalone directory
Once the demotion is complete, use Server.app to promote your server to an OD Master
Update: I've not found it to make a difference if you use server.app or Server Admin to configure your Open Directory Master.
Once the server is again an Open Directory Master, import the users that you exported using Server.app instead of Workgroup Manager.
If you are importing groups, set the Home Directory by editing the account in Server.app before importing groups to avoid overwriting your group settings. Thankfully, you can select multiple accounts at a time.
Import your groups using Server.app
Verify group membership and test the loginsIf you test the login using the dscl command from above, you should get no error after entering the password, but as long as you have a bound client, you should be able to login at this point.
Hope this reaches you in time to help.

Wrong UID from open directory server

I have a problem with a mac OSX server
I have an open directory server A, that shares all users to every other server i have.
I then have 2 mac OSX servers B and C, that it set up to allow network users. I can easily login with a open directory user, on both servers, but I have a problem. on server B it says the users user id is 1050, which is correct. On server C it says that the same users user id is 1000, which is wrong. Both server set ups are identical, as far as I know. On the Open Directory server A the users id for the user is also 1050, in case that is relevant.
I have checked if server C has a local user with the same name, but htat is not the case.
Any idea what might have caused this problem?

bump

Server 4: open directory entry for server reports wrong IP address

I'm running Server 4 on a Mac Mini (late 2012) running OS X 10.10.
The server is configured as a stand-alone machine providing services to users connecting over its fixed IP public address. The server uses Open Directory to keep record of authorised users of the services provided (mail, calendar, wiki, contacts, some file sharing), and the machine is configured as an OD master.
I've noticed that the entry relating to the server on the Server 4 panel for Open Directory (the only entry showing by the way) lists three IP addresses below the name of the machine. My concern is that these IP addresses are not related to the IP address being used by the machine, and there does not appear to be any simple way to change them. The IPs reported are 10.37.129.2, 10.0.1.2, 10.211.55.2. The server's fixed IP is in the range 45.146.x.x and the local network running below our router that the server connects to has IPs in the range 192.168.1.x. So It is not clear where these IPs might be coming from.
What do these numbers relate to? If they are important, should they point to the IP address occupied by the server? If so, how do I make this change in settings?
Thanks a lot in advance for any help that you can provide.

<bump>

Open directory in mavericks server.

Setting up mavericks server - open directory displays error " server was successfully configured as a directory server but an error occurred" I have tried everything. Can anyone help ?

Does the server show up in the Server list as (Master)? If so, delete it, make absolutely sure your DNS set up and try again.
Even though I hsve a fully qualified Domain name, SERVER.DOMAIN.COM and my reverse lookup set weith my ISP. if I do a lookup for the IP of my server it returns server.domain.com, found Open Directory was much happier if I used the DNS server on the Server Itselfl
In Server DNS created a Primary Zone for my doman, domain.com. Then a Machine A Record for server,domain.com. It automatically made a nameserer record of server.domain.com and the Reverse Zone and server mapping for reverse lookup. Then set it to perform lookups for this server only. Then set 127.0.0.1 as the First DNS server in System Network Settings before any ISP DNS Servers. Then for good measure also entered my ISPs DNS servers in as forwarding servers. Then setup Open Directory with the correct domain with no errors.

Trouble starting managed weblogic server on another machine in acluster

Hi,
          I was having trouble starting managed weblogic server on another machine in a cluster from the command prompt
          I have following setup:
          1) BEA weblogic is installed on 2 machines - local machine A with ip address 172.17.2.219 and another machine B with ip address 172.17.2.201
          2)node manager is running on both machines
          3)An admin server myserver on the local machine at port 7001
          4)In the admin tree under Machines a new machine is created 'Machine1' with Node manager Listen Address: 172.17.2.201
          5) The managed server 'BEAServerMan1 ' instance is created with listen Address 172.17.2.201 and port 7705. This Server is assigened to Machine1. The server also belongs to a cluster 'Cluster1' where the 172.17.2.201:7705 is part of the Cluster Address.
          I can start 'BEAServerMan1 from http://172.17.2.16:7001/console/
          But I am unable to start BEAServerMan1 from the console using the command :
          startManagedWebLogic BEAServerMan1 http://172.17.2.219:7001
          startManagedWebLogic.sh BEAServerMan1 http://172.17.2.219:7001
          CLASSPATH=/opt/BEA/j2sdk1.4.1_03/lib/tools.jar:/opt/BEA/weblogic81/server/lib/weblogic_sp.jar:/opt/BEA/weblogic81/server/lib/weblogic.jar:/opt/BEA/weblogic81/server/lib/ojdbc14.jar::/opt/BEA/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/opt/BEA/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/opt/BEA/j2sdk1.4.1_03/jre/lib/rt.jar:/opt/BEA/weblogic81/server/lib/webservices.jar:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03:/opt/BEA/j2re1.4.1_03/bin:/opt/BEA/j2re1.4.1_03:/opt/BEA/j2sdk1.4.1_03/lib/tools.jar:/opt/oracle/OraHome1/jdbc/lib/classes111.jar:/opt/oracle/OraHome1/jdbc/lib/nls_charset11.jarx:/opt/BEA/user_projects/domains/mydomain/myserver/stage/_appsdir_dyn_ear/dyn.war:/opt/BEA/user_projects/domains/mydomain/./myserver/.wlnotdelete/extract/myserver__appsdir_dyn_ear_dyn/jarfiles/WEB-INF/lib/dspjspTaglib1_036773.jar:/usr/bin/j2re1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11:/usr/bin/j2sdk1_3_1_11/lib/tools.jar
          PATH=/opt/BEA/weblogic81/server/bin:/opt/BEA/j2sdk1.4.1_03/jre/bin:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03:/opt/BEA/j2re1.4.1_03/bin:/opt/BEA/j2re1.4.1_03:/opt/BEA/ATG6.2.0/home/bin:/usr/xpg4/bin:/opt/bmc/Patrol3/Solaris28-sun4/bin:/usr/bin::/usr/openwin/bin:/bin:/usr/ucb:/usr/local/sbin:/usr/dt/bin:/opt/RICHPse/bin:/usr/bin/j2re1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11/bin
          * To start WebLogic Server, use a username and *
          * password assigned to an admin-level user. For *
          * server administration, use the WebLogic Server *
          * console at http://<hostname>:<port>/console *
          <13-Jan-2005 3:22:20 o'clock PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.1_03-b02 from Sun Microsystems Inc.>
          <13-Jan-2005 3:22:21 o'clock PM EST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://172.17.2.219:7001 to check if there exists a running admin server at this URL.>
          <13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
          <13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009
          WebLogic XMLX Module 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009>
          <13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://172.17.2.219:7001 to retrieve the initial configuration.>
          <13-Jan-2005 3:22:27 o'clock PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/BEA/user_projects/domains/mydomain/BEAServerMan1 /BEAServerMan1 .log is opened. All server side log events will be written to this file.>
          <13-Jan-2005 3:22:37 o'clock PM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
          <13-Jan-2005 3:22:38 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000328> <Starting WebLogic Managed Server "BEAServerMan1 " for domain "mydomain">
          <13-Jan-2005 3:22:50 o'clock PM EST> <Notice> <Cluster> <BEA-000138> <Listening for announcements from cluster Cluster1 on 237.0.0.1:7001.>
          <13-Jan-2005 3:22:50 o'clock PM EST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Cluster1.>
          <13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <WebLogicServer> <BEA-000350> <Unable to create a server socket on Channel Default for: 172.17.2.201, port: 7705. java.net.BindException: Cannot assign requested address Perhaps the address 172.17.2.201 is incorrect or another process is using port 7705.>
          <13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <Security> <BEA-090085> <Server failed to bind to the configured port. The port may already be used by another process.>
          <13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: Server failed to bind to the requested port. See preceeding log message for details.>
          The WebLogic Server did not start up properly.
          Exception raised: 'weblogic.server.ServerLifecycleException: Server failed to bind to the requested port. See preceeding log message for details.'
          Reason: Server failed to bind to the requested port. See preceeding log message for details.
          ***************************************************************************

Hi
          i am also facing the same problem.kindly reply for th solution if you got.
          D:\bea1\user_projects_cluster\mydomain>startManagedWebLogic server2 10.16.96.21:
          7001
          D:\bea1\user_projects_cluster\mydomain>echo off
          CLASSPATH=d:\bea1\jdk131_03\lib\tools.jar;d:\bea1\weblogic700\server\lib\weblogi
          c_sp.jar;d:\bea1\weblogic700\server\lib\weblogic.jar;F:\bea\weblogic81\server\li
          b;D:\;c:\
          PATH=.;d:\bea1\weblogic700\server\bin;d:\bea1\jdk131_03\bin;E:\oracle\product\10
          .2.0\client_1\bin;C:\Program Files\Common Files\NetSarang;C:\WINDOWS\system32;C:
          \WINDOWS;C:\WINDOWS\System32\Wbem;F:\bea\jdk142_05\bin;C:\PROGRA~1\IBM\CLIENT~1;
          C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\PROGRA~1\IBM\CLIENT~1\Emulator;
          * To start WebLogic Server, use a username and *
          * password assigned to an admin-level user. For *
          * server administration, use the WebLogic Server *
          * console at http://[hostname]:[port]/console *
          D:\bea1\user_projects_cluster\mydomain>"d:\bea1\jdk131_03\bin\java" -hotspot -Xm
          s32m -Xmx200m -Dweblogic.security.SSL.trustedCAKeyStore=d:\bea1\weblogic700\serv
          er\lib\cacerts -Dweblogic.Name="server2" -Dbea.home="d:\bea1" -Dweblogic.managem
          ent.username= -Dweblogic.management.password= -Dweblogic.management.server="10.1
          6.96.21:7001" -Dweblogic.ProductionModeEnabled= -Djava.security.policy="d:\bea1\
          weblogic700\server\lib\weblogic.policy" weblogic.Server
          <Sep 20, 2007 1:47:13 PM IST> <Info> <Security> <090065> <Getting boot identity
          from user.>
          Enter username to boot WebLogic server:weblogic
          Enter password to boot WebLogic server:
          Starting WebLogic Server...
          Connecting to http://10.16.96.21:7001...
          <Sep 20, 2007 1:47:25 PM IST> <Notice> <Security> <090082> <Security initializin
          g using realm myrealm.>
          <Sep 20, 2007 1:47:25 PM IST> <Notice> <WebLogicServer> <000328> <Starting WebLo
          gic Managed Server "server2" for domain "mydomain">
          Starting Cluster Service...
          <Sep 20, 2007 1:47:46 PM IST> <Notice> <Cluster> <000138> <Listening for announc
          ements from cluster mycluster on 237.0.0.1:7777>
          <Sep 20, 2007 1:47:46 PM IST> <Notice> <Cluster> <000133> <Waiting to synchroniz
          e with other running members of mycluster>
          <Sep 20, 2007 1:48:16 PM IST> <Notice> <Cluster> <000134> <Discovered and synchr
          onized with 1 other running members of mycluster>
          <Sep 20, 2007 1:48:17 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to c
          reate a server socket on Channel Default for: 10.16.96.24/10.16.96.24, port: 900
          1. java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
          address 10.16.96.24/10.16.96.24 is incorrect or another process is using port 9
          001.>
          <Sep 20, 2007 1:48:18 PM IST> <Emergency> <Security> <090085> <Server failed to
          bind to any port such that it is not reachable from the console.>
          <Sep 20, 2007 1:48:18 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to i
          nitialize the server: Fatal initialization exception>
          The WebLogic Server did not start up properly.
          Reason: Fatal initialization exception
          D:\bea1\user_projects_cluster\mydomain>goto finish
          D:\bea1\user_projects_cluster\mydomain>ENDLOCAL
          D:\bea1\user_projects_cluster\mydomain>ENDLOCAL
          D:\bea1\user_projects_cluster\mydomain>

Bind to report server problem

hello all
please i want your help of my case that iam trying to run areport from aform both are (10g).
the problem is when calling the report from a button in aform with this code in the ''when_button_pressed'' trigger
web.show_document('http://localhost:8889/reports/rwservlet?&report=c:\MODULE2.jsp&destype=cache&desformat=PDF&userid=scott/tiger@ahmad');
it generates for me aweb page with an error (REP-51002: BIND TO REPORT SERVER FAILD).
The advise presented from reports builder help is to make sure that the Reports Server is running and that the Reports Server name is correct.
so i make from run the following test ''rwserver'' it gives me aprompt with a message (please consult the installation guides for how to setup and run this program).
so please please help find the solution.
note: when i try to run the report from the report builder it works good and generates the report properly both paper layout or web layout.

Thank u so much rajesh for your advises and help.
i have tried your steps you have written in the last theared on my pc and on another pc has the same (10 g release) and project and i got the following results:
1.For the scond pc evry thing was good and works properly. when performeing the command (rwserver server= rep_server) it intializes the report server and starting it very well and calling a report from aform goes well. and when running your form REPORT_SERVER_LIST.fmx it gives me the results for list of rep servers started.
But on my pc which has the problem when running the command (rwserver server= rep_server) it starting the rep server for a 1 or 2 seconds then quickly shutdown the report server alone.
when trying again and again when starting the rep server it gives a windos error msg says (connot delete file ''rep_repservername'') and shut down the rep server.
can u please rajesh explain for me wy it is happening?
i have tried to solve the problem so i vave opened the (Devhome\reports\server\) and and i found the reports servers files thier. i have recognised that that those files is (.dat) files and was considered the (Windos media player 10) as the recomended program to open . Do you think Rajesh that the (Windos media player 10) desabling the report servers and shutdown it??? becuase i have so that no recomended progrom to open in the good pc.
please rajesh help>>>.
ahmad salem

Javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server reportserver fail??

why i cant open my report in JDeveloper tools but i can open in report builder ????
this is the error i get ...
Reports Error Page
Fri Oct 18 15:41:54 SGT 2002
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server reportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server reportserver failed
     int oracle.reports.jsp.ReportTag.doStartTag()
          ReportTag.java:329
     void MyReport.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          MyReport.jsp:4
     void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          HttpJsp.java:119
     void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
          JspPageTable.java:302
     void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          JspServlet.java:407
     void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          JspServlet.java:328
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          HttpServlet.java:336
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          ServletRequestDispatcher.java:684
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
          ServletRequestDispatcher.java:269
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
          HttpRequestHandler.java:735
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
          HttpRequestHandler.java:243
     void com.evermind.util.ThreadPoolThread.run()
          ThreadPoolThread.java:64

i still get the same error .. is it i need to set any environment variable or ... any setting ...??
login Oracle Database
user name = system
password = manager
services = dbhenry
setting JSP Report
Report Name = MyReport1
Reports Server = reportserver
Parameters = userid=system/manager@dbhenry
the cource code below is my JSP report coding :
<rw:report id="MyReport1" parameters="server=reportserver&userid=system/manager@dbhenry">
<rw:objects id="objects">
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<report name="MyReport1" DTDVersion="9.0.2.0.0">
<xmlSettings xmlTag="MYREPORT1" xmlPrologType="text">
<![CDATA[<?xml version="1.0" encoding="&Encoding"?>]]>
</xmlSettings>
<data>
<dataSource name="Q_1">
<select>
<![CDATA[SELECT ALL HENRY.TEL, HENRY."ADD", HENRY.NAME, HENRY.ID
FROM HENRY ]]>
</select>

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

Trouble binding 10.5 Server to 10.6 Open Directory

Similar Messages

Maybe you are looking for