Trouble booting from USB/Sata

I have a T430s, and put a different drive in it to run Linux. After connecting the previous drive to a SATA-USB connector, I tried booting from the external (Windows) disk, but am not getting anywhere. I moved that drive (recognized in the BIOS utility) to the top of the list, but when I start I get a message to "remove disk" and start again, as if it's trying to boot from a non-bootable CD.
Any ideas? I need to run native Windows periodically but hate having to keep swapping out the drives. This should work, right?
Solved!
Go to Solution.

Windows won't run through USB port by default. You'll need some fiddling to get it to work.
http://reboot.pro/topic/9196-tutorial-boot-windows-7-from-usb-hard-disk-by-karyonix/
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Trouble Booting from USB Drive

So I am using Syslinux this time around on my Arch install. Everything about it is fine, except that now I am trying to boot from a Backtrack 5 R3 USB which also uses Syslinux (I think, via uNetbootin) and it loads straight to the normal Arch Syslinux. How can I make it boot to the USB?
Thanks a bunch,
- Yorak

I was not referring to the Arch USB drive. I used the Win32 Disk Imager program as suggested in the Arch Wiki, and that works great. Boots right up and I am able to do my business. My problem was specifically trying to find a method to get Backtrack 5 R3 to run from a USB drive like my Arch one. uNetbootin does not work. I tried Linux Live USB as well to no avail. In my BIOS, the USB drive is selected first. Sorry guys, I guess my issue is best suited in the Backtrack Forums. I was thinking it had something to do with Syslinux until I thought harder about it, lol. Thank you all so much for your replies though. :-)

Cannot boot from USB , Edge 72z very frustrating

Hi All,
I am having trouble booting from a usb flash drive. I have disabled secure boot and have tried two different bootable usb flash drives and nada!
I get an error message 1962 cannot load file system (or similar). I have changed modes from uefi to legacy and tried various combinations and cannot get it to boot.
When i hit the f12 key on startup i can arrow down to my usb drive but upon pressing enter the above error message occurs.
Any ideas would be great
Thanks
Dave

Unfortunately you'll have to do another search, Maybe Yahoo/Google this time.
I'm guessing you did the Boot Camp Assistant .plist hack for the USB W7 installer? Did you try adding your <boot rom> version, farther up the list. I think a couple of people got it to work but can't be sure.

Booting from USB drive on PPC

Hello everyone!
I know I will have people agree with me or possibly disagree with me, but if you goto the following site and see my pictures of my 2003 G4 MDD booting up Leopard from an external USB drive, you will see that this is fully supported. Also, what is strange is that although I found the tip through macfixit.com and other sites, one really doesn't have to go into the firmware and do anything.
As the pictures show, my USB 2.0 drive booted right into Leopard in less than 20 secs.. Please visit
http://s704.photobucket.com/albums/ww50/psychomacuser/ and see for yourself USB 2.0 in action on my system. Sorry if you have trouble reading the cyrillic, I have my system set up in Russian.

{quote}Also, what is strange is that although I found the tip through macfixit.com and other sites, one really doesn't have to go into the firmware and do anything.{quote}
Hey Nadav, thanks for the post.
What tip did you find exactly? Just that you can boot from USB?
R.

Multiple errors attempting to capture a Windows 8 reference image after booting from USB (Dell Latitude 10)

From results.xml:
<?xml version="1.0"?>
<Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Apply Windows PE.
Unknown error (Error: 00001550; Source: Unknown)
The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
Unknown error (Error: 00001550; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.

Here is the second part of BDD.log:
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
<![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

Can't boot from USB or DVD. HP Pavilion g6-2257sr

My new notebook HP Pavilion g6-2257sr don't let me to boot from USB device.
When notebook's booting, I pressed ESC and F10. Then I set up UFEI boot order - USB-device / DVD / OS selector.
I use official Windows 7 disk, and several own USB devices with bootable images.
But rebboting use hard drive's OS all the same.
Please help. I want to delete current OS from my notebbok.
This question was solved.
View Solution.

Hi:
I would make a set of recovery disks first before proceeding.
To boot the PC you need to go into the BIOS and enable legacy mode.
Then you should be able to boot from another device.

Can I boot from a SATA drive? What if it's RAID?

I'm planning on getting the MSI 875P Neo FIS2R 800FSB motherboard. I'm also planning on getting ONE SATA hard drive. Can I boot from the SATA drive? Do I HAVE to set up it as a RAID drive? Can you boot from RAID drives? RAID and SATA confuse me a little. Anyone care to help?

I'm using the MSI 865PE Neo2 board and I'm having this problem. It probably has an easy solution, but this is my first build, so I'm not sure exactly what to do.
MSI 865PE Neo 2 Mobo
2.4b P4
Seagate SATA 80GB HDD
Panasonic FDD
Lite-On DVDROM
It took me a little bit of experimenting, but I got the BIOS to recogonize the DVD & HDD. It seems every time I got it to recognize one, the other disappeared. Anyway, like I said, BIOS recognizes all 3 now.
I go to install XP and it says I need to install the drivers from a floppy (after I had previously hit F6). Well, where do I get the drivers? I have a CDROM that came with the mobo but I don't know where to find the drivers for the SATA controller on it. ???
Can someone help me by directing me to a download and/or the file names that I need to transfer to floppy for Win XP installation? I would appreciate it. Thanks.

How Can I boot from USB - Portege A200

Hi,
I've got an Portege A200 which is only a couple of years old but the hard drive no longer works. Initially I thought this was due to corrupting the boot record on the drive but after attempting to replace the hard drive (with two different drives) it is showing an IDE #0 error upon boot. I have therefore come to the conclusion the IDE controller chip has died.
In order to get the latop working I burned a cd with the ubunto ISO. This boots ok but due to only have 512Mb RAM the system is somewhat limited and anything installed is lost everytime I reboot.
I have now bought a 2Gb flash drive and installed ubuntu onto this. My next problem is that there appears to be no boot from USB HDD or USB Memory Stick option in the bios.
The possible options that I can think of are:
1) Upgade the bios so it supports boot from memory stick (although no HDD so not sure how I could reflash the BIOS or if there is even a BIOS upgrade that would support this functionality)
2) Create a cd which starts the boot process then tells the system to continue booting from the usb drive (Is this possible and does anyone know where I might be able to obtain such software)
3) Boot from CD but use the USB to retain any information saved / any installs etc (I guess similar to option 2 except the cd would manage the whole OS and the USB would just hold 'additional' information)
If there are any other options that anyone can think of I am happy to give them a go. Seems a shame to have to chuck a laptop that isn't particularly old because the IDE controller chip has failed on the mobo.
I apppriciate any help anyone can offer.
Many thanks,
Mark

Hi
First of all I have to say that its not possible to boot from the external USB device like the USB stick, USB CD/DVD drive or USB HDD.
Its possible only to boot from the external USB FDD (diskette) drive
However, not the booting possibilities are clear but I think you have misunderstood the IDE#0 error message. In m opinion the IDE controller is not faulty but only the new HDD is not compatible and not recognized by BIOS.
There are different reasons for this issue
Mostly this error message appears if the HDD master/slave/c-sel settings are not correct.
Usually such settings dont need to be changed or switched on 2.5 HDDs but some HDDs support an jumper which must be set in the right position. But I dont if your HDD supports this
Furthermore the not compatible HDD size could be the reason for such error messages!
So finally I would recommend contacting the ASP in your country to get a new, compatible HDD and to check if the same error persists.
Good luck

Trouble Booting from External Drives; Trying to Defragment from External

I have a Verbatim External Firewire 400/USB 2.0 hard drive that has Leopard installed on it. I have installed Drive Genius and Disk Warrior on the external drive. I boot holding the Option key and see the list of drives, and the External does appear. When I select it, the computer just reboots and loads the loads the internal hard drive. I'm trying to defragment the MacBook Pro from an external drive, but I can't do much if it won't boot from an external. I know with Intel Macs, you can boot from USB 2.0 and FireWire. Why won't it work? To be more advanced, I made a disc image of the MacBook Pro Restore DVD and restored it to a new partition of the external, thinking the operating system might be different in the new MacBook Pro because of the new settings in the System Preferences that control the glass trackpad. I'm stuck. Please help.

No, I would not recommend making a disc image. I would recommend cloning the drive to a freshly erased external drive. Cloning is not the same as making a disc image. Disc images cannot be used to boot the computer. They are large and unwieldy. They are intended to be burned to an optical disc and not used as a system backup.
Clones are exact file copies of everything on the source drive such that the destination drive is a mirror of the source drive. You can boot clones, you can update them, and you can access them directly just like any other drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the drive to which you will restore or backup.
Source means the drive you are restoring from or backing up.
There are many alternatives to using Disk Utilities Restore option. Any of the following can create clones as well as perform regular backups, and they can incrementally update a clone:
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
10. MimMac (Shareware)
11. SilverKeeper 2.0 (Freeware)

Satellite C50-A634 wont boot from USB or DVD

My new toshiba Satellite C50-A634 wont boot from usb, or dvd ,
i have downloaded win 8.1 and burn image to dvd but i still get an error message "no bootable device......please restart system" .
Can some one plz help?

Hi
Does Satellite C50-A634 supports internal CD/DVD drive or did you try to boot from external optical disk drive?
You have to know that _Satellite C50 & Satellite C50D models *without* a built-in ODD_ are not able to boot from an external ODD due to a technical limitation.
Details here:
[Limitation of external boot media for Satellite, Satellite Pro C50 & C50D devices|http://aps2.toshiba-tro.de/kb0/TSB3B03JA0000R01.htm]
Only USB flash drives are supported as external boot devices!
It is necessary you can use a USB flash drive as recovery media on notebooks without a built-in ODD.

Hp mini will not boot from usb and USB not listed as a choice

I have an HP mini 110-1116NR and it crashed. During a system restore it stopped working so now there is no operating system on it.
In BIOS there is no choice to boot from USB (when my disks come in mail from HP)
Also when it kinda starts im at the DOS screen....system32.exe???????
I dont know what this means

Hi cathy69:
Thank you for your inquiry. I am pleased to assist you!
I hope you had a great weekend!
I see you are looking to change the boot order on your computer. Here is a link to 'Configuring the Boot Order in the System Bios" click here. Please let me know if you require further assistance.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Mobo Support for booting from USB hdd

Hi,
I have a K8N Diamond.
How can I check whether my mobo can support booting from USB hdd?
I know it can boot from the USB-CDROM.
If not, do I need a bios update?

Quote from: Stu on 21-January-08, 00:38:45
How to identify your BIOS and m/b version
But please don't go flashing your BIOS just for the sake of doing so.
Your USB HDD will be listed under Hard Disks in BIOS, there won't be a USB-HDD option
Wow, thanks for the link and the pointer. I've found out where the USB hdd is now.
I won't flash my bios for the sake of that thanks to you, but I'm upgrading to a Dual-Core soon and I realised my bios is w7100nms v1.0.
So I have to flash my bios soon. Any tips regarding this?

How to boot from usb flash drive on Satellite A500-o25

How do you configure boot order on A500-o25 so that it boots from usb drive first.

Hi,
Enter the Bios, pressing F2 on startup, go to the Boot menu and choose Usb drive as the first boot device (you navigate with F5 and F6 keys). Press F10, and ..Save and Exit menu ,, appears, press ok. That's all.
Note, on my satellite A500, I have to connect the Usb flash before to turn computer on, otherwise the usb flash drive doesn't appear in boot menu in Bios
Message was edited by: Jeka-IL

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

My partner and I are completely unable to install Windows using Bootcamp. We have tried dozens of solutions on the internet.
2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank. We have (hilariously) another Mac, an MBP, that has the same exact problem. You'd almost think "Superdrives" eventually just stop working or something. So obviously we can't install Bootcamp on the iMac using a DVD.
But what about a USB stick? Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error.
So our iMac can't boot from USB drives or read DVDs. We've only owned it for two years. And this is the second Mac we've owned where the Superdrive has died. And we don't even use DVDs more than like once a year.
But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year? Maybe a way to make our mac boot from our USB stick? Something?
Thanks.

Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

Trouble booting from USB/Sata

Similar Messages

Maybe you are looking for