Trouble Burning Dual Layer Discs

I have recently installed the Samsung SH-S202N. I have Toast 9. I have tried to burn +R DL discs several times now, and they simply stick at around 2% complete. I then can't force quit toast or eject the disc.
I looked on the Samsung site for firmware updates, but there are currently none.
Any suggestions? Thanks in advance.
Ben

I have had an issue with the Toast display getting stuck while the burn is actually completed; it'll say 18% completed forever, but the "time remaining" continues to tick down, and eventually I have a disc. Don't suppose that is your case? The latest Tiger upgrade may have whacked roxio software pretty hard, I am having lots of roxio trouble now.
As always, delete the toast plist in preferences, restart.
Internal superdrive or external after market burner? Toast is pretty good with after market externals. I gotta say. Also never use a hub or daisy chain on an external burner.. always connect directly to mac.

Similar Messages

Trouble burning Dual-Layer discs using various programs... suggestions?

Hello, I could really use some constructive, helpful recommendations here. I've been trying to burn some large (5+ GB) disc images (ISOs, but mostly VIDEO_TS files) to a Dual-Layer disc that would play on a regular DVD player.
So far I've tried a couple different DL disc brands (HP, Memorex), and various programs (Finder, Liquid CD, even Toast Titanium 10 seems to have a hard time doing so), but without much luck-- mostly just end up with coasters.
Have you had this problem trying to burn Dual-Layer discs? And what's a good freeware/shareware program or method that's done the job that you can recommend? I have at least 75GB of space on my 250GB drive (so I would imagine that's enough for any temp burn folder purposes...)
Thanks!

I use Verbatim usually and never have any problems so try one of those if possible, but before you do run a DVD Lens Cleaner disc through it as just a small spec of dust or dirt can sometimes play havoc.
I burn most things with Toast or the Mac OS itself.

IDVD will not burn dual layer disc correctly.

I have an iMac9,1 Intel Core 2 Duo 2.66 GHz with 8 gigs of ram, with a OPTIARC DVD RW AD-5670S DVD-writable to -R, -R DL, -RW, +R, +R DL, +RW. It will not spit out a properly formated disc from IDVD. I get the "Supported disc not available" message, even though I have encoded it for dual layer in NTSC.
Has anyone ever experience problems with this? If so, what did you do to resolve it? I've burned through a half a dozen dual layer disc and these are still not supercheap.
TommyBoye

Yes I called and my warranty was up so the nerd on the other end tried to sell me the applecare protection program. I guess my next step is to go to an apple store, but as the person that replied last in that discussion said time is an issue. I guess my biggest problem with this whole thing is that it is obviously the update that messed up all of these superdrives, so warranty shouldn't be an issue. Apple even removed the download link: http://www.macfixit.com/article.php?story=20070716082804520&query=superdrive

Burning dual layer discs

Hi all,
so i finally decided to bite the bullet and divorce my PC, Windows and almost everything microsoft,
my new life with Mac is fantastic!!!
so, a little advice is what i need with me being still new to the world of mac.
last night i tried to burn a large amount of data to a dual layer disk, after it was complete it took a while to verify it, then a new window popped up saying i had inserted a blank disc?? so i ejected the cd and slid it right back in, after a minute or so and a few noises it was spat right out, do i need to use a seperate burning program in order to burn dual layer propperly??
thnaks all!!!!

I am having problems with burning DL discs too. Below are the specs on my MBP and SuperDrive. BTW, I am trying to burn to TDK DL and have made 10 coasters, over half of those with Apple support on the line.
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
HL-DT-ST DVDRW GSA-S10N:
Model: HL-DT-ST DVDRW GSA-S10N
Revision: AP09
Serial Number: K1N79BD5217
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Power Off: Yes
Firmware Revision: AP09
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
I am going to try Verbatim DL disc per the suggestion of the link below:
http://www.digitalfaq.com/reviews/dvd-media.htm

Problems burning dual layer discs using 10.3.9

Hi please can someone help!!
I am pretty knowledgeable about macs but having problems.
My mac came with a pioneer 103 superdrive and have had no problems burning CDs and DVDs with Toast 6 Titanium. Recently i wanted to back up my dvds i have bought as some you can't easily buy anymore.
So i bought an external usb pioneer 108 and some 2.4x Dual layer DVD+R Rivision discs.
When ever i burn it gets right to the end of finishing and comes up with various errors and says it may have a lead-in lead-out connectivity problem. I have installed a patchburn which recognised both dvd drives and i installed before trying to burn. I have read somewhere that OSX 10.2.9 + can burn Dual layer and i have 10.3.9.
I have tried best and 2x with no joy. I am also using the setting DVD-ROM (UDF). After the disc mounts it plays through DVD player but is really jolting and is spit out by my normal DVD player connected to my TV.
I have got the DVD info off the disc using MactheRipper and just placing the two folders Video T_S and the other on the disc. I am keeping the Name as it was orginally. I have successfully copied a DVD that was less than 4.7gb which worked on both of my dvd players with my Pioneer 103 drive that can only burn normal DVDs.
I have not tried burning any other disc formats on the Pioneer 108 but felt it was a software problem rather than a hardware.
I have looked on Pioneer.co.uk and they have Firmware's i can download for the Pioneer 108 but not sure what firmware is or does? or whether they are PC or Mac versions.
thanks for your time, hope i have given all information required, would appreciate anyones help.

Hi
See Mac OS 10.4 Help
And Mac OS 10.3 Help
You need Tiger if you want to burn DL Media using the Finder, otherwise you'll need to invest in Roxio's Toast.

Trouble burning dual layer dvd's with my superdirve

Hello, my question is regarding burning dual layer dvd's on my macbook pro. After finishing up a 5.6 GB movie in DVDSP4, i exported as an image (burned it as a .img) and then opened it up in disk utility for burning. Upon execution, i received an error message that said " the device failed to calibrate the laser power level for this media." I then tried burning the .img via DVDSP4 as well as the standard drag to disk on my desktop, all with the same luck. When trying the standard drag, drop and burn method (burn folder on my desktop), i received the error code 0X80020022.
After having no luck, i tested my super drive with standard CD's and single layer DVD's which it burned to just fine. I then tried switching media from memorex dvd dl +r's to sony dl + r's, but unfortunately it just refuses to burn to dual layer.
Any ideas as to what might be the problem?
Thanks.
Terry

Great Job

Exporting to burn dual layer disc from FCP

Greetings,
I have a 90 minute HD show that is 5.7 gigs after compression, do I need to export the show in two parts in order to burn a two sided disc, or does the toast software or any other disc burning software recognize and splits it accordingly.

Is this meant to be a regular DVD or a HD DVD (the kind that only play on those obsolete Toshiba machines that lost the fight with BluRay)?

Problems with Burning Dual layer discs

I now have a pile of DL +R disc coasters as a consequence of failed burns....
I've put a new DL+R disc in th drive and system profiler says;
HL-DT-ST DVDRW GWA4080MA:
Firmware Revision: AE39
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type: DVD+R DL
ID: MKM 001
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes
Write Speeds: 2.4x
which seems okay.
Burning an ISO to the drive gives an error right at the start and the disc is unuseable. The log files show ;
2009-03-06 21:29:46 +0000: Burning Image “10A286-UserDVD.dmg”
2009-03-06 21:30:56 +0000: Image name: “10A286-UserDVD.dmg”
2009-03-06 21:30:56 +0000: Burn disc in: “HL-DT-ST DVDRW GWA4080MA”
2009-03-06 21:30:56 +0000: Erase disc before burning: No
2009-03-06 21:30:56 +0000: Leave disc appendable: No
2009-03-06 21:30:56 +0000: Verify burned data after burning: Yes
2009-03-06 21:30:56 +0000: Eject disc after burning
2009-03-06 21:30:56 +0000:
2009-03-06 21:30:56 +0000: expected CRC32 $9769A210
2009-03-06 21:30:56 +0000: Preparing data for burn
2009-03-06 21:31:19 +0000: Finishing burn
2009-03-06 21:31:28 +0000: Burn failed
2009-03-06 21:31:28 +0000: The burn failed because of a medium write error.
2009-03-06 21:31:28 +0000: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
2009-03-06 21:31:29 +0000: Unable to burn “10A286-UserDVD.dmg”. (The burn failed because of a medium write error.)
2009-03-06 21:31:29 +0000:
Looking at the logfile;
Disk Utility: Burn started, Fri Mar 6 21:30:56 2009
Disk Utility: Burning to DVD+R DL (MKM 001) media with DAO strategy in HL-DT-ST DVDRW GWA4080MA AE39 via ATAPI.
Disk Utility: Requested burn speed was 47x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Fri Mar 6 21:31:18 2009
Disk Utility: Burn sense: 3/0C/00 Medium Error, Write error
Disk Utility: Burn error: 0x8002006E The burn failed because of a medium write error.
DiskUtility has the 2.4x speed set but its grayed out - the above suggests that DiskUtility is trying to burn at 47x but as the speed setting is grayed out I cannot reduce the speed in any way.
Anyone had this before - I have used this brand of disc before and its from the middle of a box which has been fine.

I'm not convinced this is a hardware issue. My logs definitely point to a software-based bug.
The clue that points to a software issue is this snippet from your log. Did anyone at the Genius bar comment on it?
*Disk Utility: Requested burn speed was 47x, actual burn speed is 2.4x.*
I think I've found a solution to my particular problem. Here's a repost of my success from another thread.
This thread solved my verification problems
http://discussions.apple.com/thread.jspa?threadID=1726622&tstart=0
Read the second posting. It gives a fantastic argument for not doing anything on the computer after you press the "burn" button in the finder.
It resolved this error for me:
Finder: Verify started, Thu Mar 12 17:47:35 2009
Finder: Discrepancy in block 300 at byte 79.
Finder: Source data: 0000 0000 0000 0200 0000 0000 0000 0D00
Finder: Burned data: 0000 0000 0000 0200 0000 0000 0000 0C00
Finder: Verify failed, Thu Mar 12 17:47:37 2009
Finder: Verify error: 0x80020063 Verification of the burn failed.
Also be sure your computer is burning at the proper speeds. Previously I was recieving this message:
Finder: Requested burn speed was 47x, actual burn speed is 8x.
Which is false because I intentionally picked to burn at 4x. After updating to 10.5.6 and repairing permissions suddenly, the log was appearing correctly as this...
Finder: Requested burn speed was 4x, actual burn speed is 4x.
You can see logs of your dvd/cd burning by opening Console (use spotlight to search for it) and looking under "LOG Files". The file is named DiscRecording.log in the console app.

Why does the file size change when put into an iDVD project? And problems with dual layer discs...

I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB. I tried just burning it onto a dual layer disc anyway to see if it might still burn at the original file size, but the disc came out unusable for some reason, and obviously hadn't been burned anywhere near full-capacity. So, I tried it again, and the exact same thing happened.
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Thanks in advance to anyone who can provide me with help on this issue.

LivelyJamesS wrote:
I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB.
Guessing here but it looks like you edited/exported an SD/DV sequence of about 30 min in FCE. DVD needs to be MPEG-2 so iDVD compresses the original file down to the size that you report.
LivelyJamesS wrote:
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
The quality will be what the MPEG-2 compression and the software allow for. MPEG-2 is DVD standard .... there's no way around that.
LivelyJamesS wrote:
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Guessing again but it would seem that you burned a Data DVD instead of a Video DVD which would be unusable by a set-top player. As I said above you can't get around DVD standards.
If by any chance your video was HD originally you can try to go the Blu-Ray route using Roxio Toast or FCS 3 (discontinued) or FCP X. You will also need a Blu-Ray burner.

Do you need Dual layer discs if you are going to burn dual layer?

Do you need Dual layer discs if you are going to burn dual layer?
My project is 1 hour & :22 mintues. Do they make Verbatim discs that can handle that? OR do I have to put it on two disks?
THanks

Hi, only just come onto this site to check a few problems I am having. Noticed that you are having trouble at stores of getting certain discs.
I order on the net +Taiyo Yuden+, who manufacture for other firms including Verbatim,An order for 100 cake tin, means they are very realistic in value. These discs look super and have not had a single fault. Dave

Burn dual layer to 2 dvd5 discs

according to the manual that when we put in the dvd5 disc to burn dual layer project dsp4 will automatically ask us to put in the 2nd dvd5 after the first layer as if we are burning into dtl tape but I have no luck laterly.
please help
thankx
JP

I encountered the following article when recently researching the same question however I have not tried it.
How to format a Dual Layer project to two DVD-Rs
http://www.rootdvd.com/public/98.cfm

How to build and burn a dual layer disc

I know that this is probably a amateur question, but this is my first time trying to build and burn a dual layer disc in DVD studio pro 4. Any feedback would be appreciated. Thanks....Chadwick

A good start would be to describe your project (one big movie? lots of smaller movies?), your hardware (internal DL burner? external? what brand?), and any problems you might be having.
Depending on those things, building/burning a DL project could be as easy as doing a single-layer one.

Can't Burn Dual Layer BD Disc with Share Option

I burn bluray discs from FCP 7 using the "share" option, and each time I do it, it's a crapshoot whether it will work or not, particularly with dual layer discs (50GB) as is the case now.
Bacially, after waiting the 15 hours for the files to output, I am greeted with the following message: "There was an error burning your disc. Please check to see if your boot volume has sufficient space." At that point I try reloading the disc and click "Try Again", but the same thing appears. I know I have more than sufficient space on my hard drive, as well as on the bluray itself (the H.264 video file is only 26gb). I also load the BD disc proir to starting the Share as I've been told that this is how the program knows you have a large enough disc capacity.
Here are the specs of what I'm using. Perhaps they can offer some insight:
iMac Intel Core Duo with most recent Snow Leopard
Buffalo BRHC-6316 Bluray/HD DVD Combo Drive
Verbatim Dual Layer Recordable 50GB Disc (6x speed)
Any help is much appreciated.
Thanks!

SHORT ANSWER: Try a different BRAND of BD-R. Worked for me!
LONG ANSWER: I wanted to be sure to post on this older thread because I just experienced this same error/problem burning blu ray out of FCP7 through the share function. I've been doing it successfully for years now, so when the "error" popped up (and kept popping up) I was surprised and dismayed. The GOOD NEWS is I found a solution. After trying the operation on several Macs (Mac Pro tower and a MacBook Pro), and after getting the error in both places, I was quickly of the mind that it couldn't be a boot memory issue. Neither of the Macs had any memory deficiencies. So, my next guess was it was the media itself. I purchased some Memorex single layer 25GB disks and... problem fixed. For your information, the disks that gave me the error were WINDATA BD-Rs (they don't say how many G they are) purchased at Micro Center. I will say they were cheap and the Memorex were not (so I suppose in this case it is true you get what you pay for). Hope this helps somebody!

Troubles When Trying to Burn Dual Layer DVD's

I'm not having any success when trying to burn to DL DVD's.
I've tried two brands, same results.
I have a mid-2009 macbook pro, which supports DL burning accourding to system settings:
MATSHITA DVD-R UJ-868:
Firmware revision: KB19
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Every time I attempt to burn (I've tried both Disk Utility when trying to burn an ISO, and the application "BURN" when trying to just burn data files)
I see it "writing" for a few seconds and then it says "finishing"
Then after it does that for a while I get the error:
"Unable to burn ... (The disc drive didn't respond properly and can't recover or retry.)
I can burn single layer dvd's just fine, wasted one just now to make sure my drive didn't go crazy.

Besides the brands, the writter can sometime makes the differnce. Memorex, Verbatim and many other name brands are actually made by the same OEM company in Taiwn, CMC I believe.
Check also the layer break point. If set incorrectly, your discs will end up to be coaster anyway. Check this article see if it helps.
How to burn dual layer DVDs

Burning a Dual Layer Disc through DVD studio pro

Formating failed
The recording device reported the not ready error: Cannot write medium-incompatible format (0x30, 0x50)
I need to know what is going on. I tried to burn a DVD studio completed project on a dual layer disc on my mac (which has dual layer capablities) and kept getting this message. I think it is the disc itself but don't have a clue what I am doing wrong.
I have been able to burn the video TS (etc) files to the desktop completely but when I try to burn to the DVD I get this error message.
Can you help.
Thanks
Susan

Which burner do you have?
What type of media? DVD+R DL or DVD-R DL? Brand?
Is your DVD Studio Pro project set as dual layer?

Trouble Burning Dual Layer Discs

Similar Messages

Maybe you are looking for