Trouble burning DVD/ Video TS to make copy

Ok here is the issue. I have a DVD that I am trying to copy to give to family. No it is not a movie copy. Its a nieces fifteens event that was recorded professionally and put on DVD. I know it can be done because we gave the dvd to someone to burn and the copies worked perfectly.
The files on the dvd are Audio TS and Video TS.
I have used both DVD-R and DVD+R dvd's.
Ok first I send the files to a burn folder. I then open the burn folder and click on the burn icon.
It request to put in a blank DVD so I do and it burns. The process takes about 10 to 15 min.
After this I try to play the dvd on the apple dvd player. And it states the the media is not supported.
So I then try to play it on several of my home DVD player with two different results.
On a Daewoo dvd player the video plays but starts about 5 min into the DVD.
On a sony and sanyo DVD players, both to not recognize the dvd and nothing happens. I have done this with both DVD-R and DVD+R.
I also have a dell laptop with dvd player and it plays on it no problem.
I have checked the dvds and see that they have all the files mentioned above.
So what is the issue, is the dvd not getting finalized. What is it that the DVD's don't play on home DVD players.
Please any advise or solutions to this matter will be greatly appreciated. I have been wasting DVD's left and right trying to figure this thing out.

First of all, it seems a bit odd that the DVD will play in one, but not in several other players, so I have no idea what the problem could be with that; however, you need to run it through some burning software before you can burn it again (Finder can't do video encoding). Toast ($$) will copy/burn a DVD in a single process if you have two burners/drives or you might want to try to use MPEG Streamclip (free) - you will need to buy the MPEG2 Component from Apple (downloadable purchase, less than $20). With MPEG Streamclip, you can import the video footage - just drag the DVD in the window - and then convert it to a format iMovie or iDVD will recognize - then import it into one of those two and burn it.

Similar Messages

After you plug an Apple USB SuperDrive into an iMac, what must you do to view and burn DVD videos?

After you plug an Apple USB SuperDrive into an iMac, what must you do to view or to burn DVD videos?

What iMac..?
The Apple USB SuperDrive only supports new iMac's that did not come with a built-in SuperDrive.
System Requirements
Compatible with the following computers:
MacBook Pro with Retina display
MacBook Air
iMac (late 2012)
Mac mini (late 2009) and later

Trouble burning dvd...message: playback may be disabled

i'm having trouble burning dvd through - share - then checking blue ray box and burning it as AVCHD. i've done it before by following these same steps but this time the dvd player gives me the the playback mabe be disabled message, any suggestions...

no, i'm not trying to burn a blue-ray disc, it's just a box in a burn window that you check even when you're burning regular dvd, so it'll come out as avchd. anyway for some reason i can't get it to work.

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

Burned DVD video looks like jerky- This did not happen before!

Hi all,
I have used I DVD before with great results! I have done several DVD's and each of them have looked great and smooth. I am using an HD camera and sharing to Itunes in the high resolution setting. The movie when played on my apple tv looks smooth and great. When the same video is burned to the DVD it looks like some of the frames are missing. While it looks clear it looks jerky like something you would see on the internet or an old home movie. Any help would be appreciated as I have tried to change the setting but cant seem to find what is wrong. I am not sure if some upgrade has hurt performance, is anyone experiencing this same issue. The slide show looks great and plays smooth with music. I created the slide show in Imovie08 and copied it into the DVD that way because when I tried to use the slide show option in IDVD the music kept skipping and cutting out.
Thanks for your help!
GE

I will try to answer both request in one post. First the video did not really look like the tracking was off generally this makes lines in the video. I was more like an old time movie only not that bad where it may have been missing some frames but the picture looked good just choppy.
What I did first was share to the media browser a "large movie" from Imovie08 then import into IDVD- that did not work choppy- about 1.05gb for 38 min of video
Next I shared to Itunes from Imovie08 same as above result the same-(guess it would be since the same movie format just in a different place. Since it worked before guessed I would give it a try. I tried this option several times on several settings. While the movie played fine in Itunes it did not when burned and played on the DVD.
Someone had a post about quicktime upgrade being a problem so I thought. . .and then
Next I exported a large .MOV file it came to 8.07GB for the same 38 min of video above. This I put into the movie file then pulled it into IDVD and burned the video and IT WORKED!!! no choppy video!
Now should I have to do this every time NO. This should be fixed as it must be with the way IDVD is reading these files.
PLEASE let me know if you have any thoughts on the fix. I did remove peridan too and that did not work. I would like not to have to create such large files to make this work.
Thanks
GE

Having trouble with DVD Video files. Please Help! :)

Hi I recently got a film DVD I wanted to take a clip off. However although I can watch the section I want in Windows Media Player, when I import the film into Premiere - some of it is missing! there are 4 files '4-1',4-2','4-3',4-4' which make up the movie. I can load them all in but 4-3 is missing the last 15-20 minutes, even though I know its there - cos this file is the same size as the previous one which is full length. Does anyone know why this would be? The DVD is unencrypted.
Please help - its quite annoying that the small section of film I want is the bit that won't appear! Thank you very much
Rich

Based on this one line:
The DVD is unencrypted.
I was assuming that it was not protected. However, as you point out, some aspects might be, and the OP might not be completely aware of this.
If there is protection, I strongly urge anyone to respect that, regardless of their intended use of the material. Copy protection is there for a very good reason. Regardless of what one might be able to do, they should be 100% ethical, and honor any/all copy protection. This is true for material from a videographer, or from a commercial studio. Should you need to use the material in such a DVD-Video, you should contact the author to get first permission, and then the original source material, that has not undergone the MPEG-2 compression to DVD-Video.
Again, I assume that the OP knows that this is NOT an issue, and will not figure into the problem. In that case, all above does NOT apply in this case, but some other reader might make note of it.
Good luck,
Hunt

Burn DVD video with Win 7 burner

I have an finished Video - it is an mp4 . how can I burn this video with my Win 7 Windovs DVD Maker an finally have an DVD

Go back to your PPro project and export again... this time to MPEG2-DVD... creates the two files needed for Encore, video and audio
Here are some Tutorials
Right side of http://forums.adobe.com/community/premiere
http://www.youtube.com/playlist?list=PL507B3498B4479B96&feature=plcp
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorial http://forums.adobe.com/thread/424009
And http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/kevinmonahan/2012/08/28/free-video-tutorial-samples-from-learning-p remiere-pro-cs6/
-and more from Kevin http://forums.adobe.com/message/4714153
http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And
http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
And http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Surround Sound http://forums.adobe.com/thread/517372
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
CS6 http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Video Scaling https://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/

Gtk apps to burn DVD-Video?

i have a folder, VIDEO_TS
but i couldn't find any way to burn it like in NERO, except for K3b
is there no gtk app to burn DVD yet?
thanks

Try Brasero and make certain to install the optional dvdauthor package along with it. I am not 100% certain about this since I have not tried burning a video DVD with it yet, but it is my only lead. Cheers. =]

Trouble burning dvd in final cut pro x

am having trouble burning my projects onto dvd's (even when I try to burn them onto the hard drive) and error message pops up saying, "The operation couldn’t be completed. (DSPPublishing error -29.)"
I was told the type of dvd can play into it from DVD-r to DVD+R but why isn't it working even when i try and do it onto my hard drive.
Anythoughts are greatly appreciated.
This is happeneing for all my projects.

version of final cut pro x is 10.0.7
i believe i am burning directly to the disk...how do i make a disk image/ whats the difference

Troubles burning dvd ?

Hi,
I just reinstalled Arch after I accidentally broke my pacman database, and I have some troubles with burning dvd : neither graveman nor growisofs in console works. As soon as I launch the burning I get an error (input/output error). What's very strange is I succeeded two times in burning, but it's not reproductible (I tried something like fifty times).
So if someone has the same problem and/or knows a way to get it back to work, your post is welcome
Thanks for helping.

many people have been having this problem after recent updates. You may want to have a look here:
http://bbs.archlinux.org/viewtopic.php? … ht=spindle
http://bbs.archlinux.org/viewtopic.php? … ht=spindle

What do we do to burn DVD video? Encore is not in CC.

What to we use or do to create DVD videos? Encore is not in the Creative Cloud. Premier Pro does not seem to work for this and I don't know where to go to accomplish this task. I have been looking for hours.

This is the link for info re using Encore CS6 with CC, updated for CC 2014 and the cloud desktop install.
http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
It has links for getting the library (which is not installed with Encore) and a workflow with CC versions.

Trouble burning DVD-R on my combo drive

Hi !!
I have a problem burning dvd's on my mac mini combo drive - it keeps giving me a burning error. I've tried several, but cheap, discs and the latest is Datawrite DVD-R 4.7 GB 120 min 16x.
When I get lucky, that means one of five, and have a successfull burned dvd in my hand ... then the quality is very poor ... My friends use the same discs on an external dvd burner also on the mac mini without any problems.
Hope you can understand my poor english.. . :-P

Are you sure you have a Combo Drive? The combo drive only supports CD burning, not DVD burning. You need a Superdrive to burn DVD's.

Burning DVD, can't drag or copy and paste items, all I get is an alias -mbp

Hi all
Just upgraded to Leopard, am I being dumb?
When I drag items to a blank DVD or copy from the HD and paste to the DVD all I get is an alias version of the files??
I have found if I hold down "alt" it copies the actual files... is there a way of swapping this as who wants to burn a disc of alias's??
Az
PS Merry Christmas!

Actually ever since Tiger there has been a change to "burn folders" which show an alias when you drag items to a mounted blank disk. Prior to Tiger the system would indeed make a copy of items to be burned, then after burning you recovered the disk space. Starting with Tiger this was changed, the alias is used and when you burn the disk the system uses the alias and burns the original to the disk. The only thing to be aware of that can cause a problem is if you find you have more "stuff" in the burn folder than space on the blank disk, and open the alias in the burn folder to trash some files--you are, of course, trashing your originals. So don't do that! Move some stuff to the Desktop or another folder to reduce the size.
Francine
Francine
Schwieder

Trouble Burning DVD

Hello,
I inserted a Double Layer DVD into my computer and tried to burn a movie file onto it and got thing message:
The maximum allowed movie duration for a single layer OneStep DVD is 120 minutes. You need to either switch the default media type to double-layer (in the Project application preferences) or select a shorter movie.
How do I do that? When I go to iDVD>Preferences, I can't click on Preferences, it's gray. WHy is that? What can I do to burn fix this?

Hi Darcy
And welcome to apple discussions. We need a little more info to make an informed suggestion for you. Simple question since DVD Type is apparently greyed out. Can you please tell us more about your mac? you may wish to add this info to your apple user profile so we can better help you. Does your mac have a dual layer or single layer burner? Go to the apple logo in the top left corner of the screen > about this mac > more info > ata > S-Drive /burner
Copy and paste all of the data / info in that box to your reply on this forum so we can study the specs on your particular S-drive you have installed in your mac.
Also please tell us the duration of your movie (total minutes). Did it come from iMovie? Does it exceed 2 hours of playback?
What DVD disc are You using ?
• DVD-R
• DVD+R or +/-RW
• Single layer
• Double layer
What brand ?
• Verbatim
• Memorex
What kind of project did You start ?
• PAL (25fps)
• NTSC (30fps 29.97)
• Encoder: Pro Quality, High Quality or High Performance

PE2 - Timeline thumbnail renders, but monitor and burned DVD video is blank for one section. Also audio export quality question

I split a clip to get rid of a few seconds of something else, and everything looked OK. I set it rendering overnight, and this morning, I found most of the DVD was fine, but this one section at the end is black on the DVD. I went back to the project, and although the timeline looks OK with thumbnails generated, it's showing black for that same section in the preview monitor. How can I "regenerate" this clip without re-adding and making the cuts?
The video details look OK though...
Video: MPEG2 Video 720x576 (4:3) 25.00fps 6802Kbps [Video]
Next up, seeing as I gave only one hours captured video to a whole DVD, I was wondering why the video was quite blocky.
Then I saw the audio....
Audio: Dolby AC3 48000Hz 6ch 192Kbps [AC-3] < what the?!? This is mono video captured off an old tape, so at most it could be 44k 96k mono, not 6ch! But despite FAQ-ing myself silly, I can't see where you change the audio properties...
Help on these two would be greatly appreciated.
Before anyone asks (and they will!) why I don't upgrade, well, V2 does what I want (which is about 2 DVDs per year!) and when I tried V4 trial, on my old 3GHz PC with 3.5Gb RAM it was TOOOO slow

I found the solution to the blank error - what had happened was that when I was trying to make the background, it said "drag media here to make thumbnail" (or something) so I did, but although it didn't work, what I didn't realise was when I dragged the preview image to the thumbnail, I had actually dragged the image right off the screen! But when I did "undo", it looked OK, so I didn't notice it hadn't undone the move. If that makes sense.
As that was the last thing I did, it didn't bother checking before burning. I found this because I started a new project to convert it, and thought "well, if it plays OK here..." and started experimenting. I only saw the video offset by accident!
As for the question about Audio, I was previewing in MPC Home Cinema, but you're right. because when I preview in Windows Media Player, it appears to be OK and says Dolby 2.0
Thanks for your help!

Trouble burning DVD/ Video TS to make copy

Similar Messages

Maybe you are looking for